Skip to Content

20,186 Results Found

  • Article
  • Open Access
50 Citations
4,100 Views
19 Pages

A Study on Mechanical and Microstructural Characteristics of Concrete Using Recycled Aggregate

  • Herbert Sinduja Joseph,
  • Thamilselvi Pachiappan,
  • Siva Avudaiappan and
  • Erick I. Saavedra Flores

27 October 2022

The objective of this paper is to provide a comprehensive study about the performance of concrete using mixed coarse recycled aggregate (MCRA) as an alternative for natural aggregate (NA) at replacement levels of 0, 30, 60, and 100%, which can greatl...

  • Article
  • Open Access
22 Citations
2,818 Views
13 Pages

18 April 2023

Any industry that manufactures dies, punches, molds, and machine components from difficult-to-cut materials, such as Inconel, titanium, and other super alloys, largely relies on wire electrical discharge machining (WEDM). In the current study, the ef...

(This article belongs to the Special Issue Preparation and Properties of Advanced Materials for Energy Storage Technologies)
  • Article
  • Open Access
2 Citations
1,153 Views
18 Pages

21 November 2025

By employing high-resolution imaging and image processing techniques, a quantitative analysis was conducted on the changes in volume fraction and size of microstructures, such as brine inclusions and air bubbles, within natural saline ice at differen...

(This article belongs to the Special Issue Advances and Challenges in the Lake, River, and Sea Ice Sciences and Engineering)
  • Article
  • Open Access
14 Citations
2,463 Views
23 Pages

Study of the Effects of Plasma Pretreatment on the Microstructure of Peanuts

  • Yingnan Wang,
  • Qu Yao,
  • Xingjun Li,
  • Jun Yin and ,
  • Zhongjie Zhang and
  • Xianqing Zhou
  • + 1 author+ 0 author

2 September 2024

In this study, cold plasma treatments are employed to modify peanuts. This study systematically investigates the effects of various plasma treatment conditions, including power, duration, and gas type, on the microstructure of peanut seed coats and e...

  • Article
  • Open Access
431 Views
21 Pages

3 September 2026

This study investigates the influence mechanism of biomimetic microstructures on propeller pressure fluctuations and radiated noise using numerical simulations. Based on the SST k-ω turbulence model and Lighthill’s acoustic analogy, the f...

(This article belongs to the Section Ocean Engineering)
  • Feature Paper
  • Article
  • Open Access
1 Citations
2,996 Views
14 Pages

3 December 2021

Analyses in the present study focus on understanding the evolution of the tungsten microstructure under He/D irradiation. A fractal dimension analysis was utilized to characterize the structural pattern of the microstructure irradiated by both low (1...

(This article belongs to the Special Issue Reliability of Structural Integrity and Engineering Materials)
  • Article
  • Open Access
15 Citations
8,583 Views
13 Pages

18 August 2017

The objective of the study research was to obtain bimodal structured ultrafine-grained ferrite steel with outstanding mechanical properties and excellent corrosion resistance. The bimodal microstructure was fabricated by the cold rolling and annealin...

(This article belongs to the Special Issue Microstructure and Mechanical Properties of Structural Metals and Alloys)
  • Article
  • Open Access
11 Citations
4,640 Views
12 Pages

11 April 2019

In this paper, the fracture toughness of the thermo-mechanically affected zone (TMAZ) and the weld zone (WZ) of the TC17 titanium alloy linear friction welding joint was studied. The relationship between microstructure and fracture toughness of the j...

(This article belongs to the Special Issue Advanced Process Technologies Based on Friction Stir Welding and Linear Friction Welding)
  • Article
  • Open Access
3 Citations
2,635 Views
14 Pages

Study of Self-Locking Structure Based on Surface Microstructure of Dung Beetle Leg Joint

  • Dexin Sun,
  • Sen Lin,
  • Yubo Wang,
  • Jiandong Cui and ,
  • Zhiwei Tuo,
  • Zhaohua Lin,
  • Yunhong Liang and
  • Luquan Ren
  • + 3 authors+ 0 author

Dung beetle leg joints exhibit a remarkable capacity to support substantial loads, which is a capability significantly influenced by their surface microstructure. The exploration of biomimetic designs inspired by the surface microstructure of these j...

(This article belongs to the Special Issue Biomimicry and Functional Materials: 4th Edition)
  • Article
  • Open Access
9 Citations
5,020 Views
10 Pages

Experimental Study on Three-Dimensional Microstructure Copper Electroforming Based on 3D Printing Technology

  • Yuanyuan Wu,
  • Shuangqing Qian,
  • Hua Zhang,
  • Yong Zhang and ,
  • Hongbei Cao and
  • Mingyu Huang
  • + 1 author+ 0 author

17 December 2019

In order to fabricate three-dimensional metal microstructures, a combined machining process based on 3D printing technology and electroforming technology is proposed. Firstly, a substrate with microstructures is fabricated by 3D printing technology,...

(This article belongs to the Section D: Materials and Processing)
  • Article
  • Open Access
11 Citations
6,093 Views
8 Pages

Study of Al-Si Alloy Oxygen Saturation on Its Microstructure and Mechanical Properties

  • Arkady Finkelstein,
  • Arseny Schaefer,
  • Оlga Chikova and
  • Konstantin Borodianskiy

11 July 2017

One of the main goals of modern materials research is obtaining different microstructures and studying their influence on the mechanical properties of metals; aluminum alloys are particularly of interest due to their advanced performance. Traditional...

(This article belongs to the Special Issue Welding, Joining and Casting of Advanced Materials)
  • Article
  • Open Access
6 Citations
4,100 Views
11 Pages

1 October 2018

The effect of ultrasonic treatment on the microstructure of Sn-30 wt.% Bi alloy was studied at different temperatures. Results showed that the ultrasonic treatment could effectively refine the microstructure of Sn-30 wt.% Bi alloy at a temperature ra...

(This article belongs to the Special Issue Advanced Technology for Materials Synthesis and Processing)
  • Article
  • Open Access
10 Citations
4,211 Views
17 Pages

Microstructure and Surface Topography Study of Nanolayered TiAlN/CrN Hard Coating

  • Peter Panjan,
  • Peter Gselman,
  • Matjaž Panjan,
  • Tonica Bončina and ,
  • Aljaž Drnovšek,
  • Mihaela Albu,
  • Miha Čekada and
  • Franc Zupanič
  • + 3 authors+ 0 author

11 November 2022

The microstructure and surface topography of PVD hard coatings are among the most important properties, as they significantly determine their mechanical, tribological and other properties. In this study, we systematically analyzed the microstructure...

(This article belongs to the Special Issue Surface Topography Effects on Functional Properties of PVD Coatings)
  • Article
  • Open Access
14 Citations
3,129 Views
31 Pages

30 March 2020

This paper explores the microstructural evolution characteristics of tailings sand samples of different types of infiltration failure during the infiltration failure process. The homemade small infiltration deformation instrument is used to test the...

(This article belongs to the Special Issue Testing of Materials and Elements in Civil Engineering)
  • Article
  • Open Access
1 Citations
2,053 Views
13 Pages

A Study on the Effect of Plastic Strain on Magnetic Phenomenology and Microstructure

  • Mehrija Hasičić,
  • Spyridon Angelopoulos,
  • Aphrodite Ktena and
  • Evangelos Hristoforou

The present work aspires to contribute to the discussion on the relationship between macroscopic measurements and microstructure, helping establish a methodology that will allow the quantitative assessment of the effect of strain on magnetic properti...

(This article belongs to the Special Issue Mathematical Modelling and Physical Applications of Magnetic Systems)
  • Article
  • Open Access
2 Citations
2,091 Views
17 Pages

Study on Microstructure and Properties of Friction-Assisted Electrodeposition Cu-SiC Deposited Layer

  • Kang Qi,
  • Kun Li,
  • Youliang Yu,
  • Qinpeng Sun and ,
  • Xiaotong Yao and
  • Long Jiang
  • + 1 author+ 0 author

21 April 2025

Based on the friction phenomenon, this study proposes a new method for localized electrodeposition preparation and prepares Cu-SiC composite deposited layers on copper substrates. The morphology of the deposited layer was observed using optical micro...

(This article belongs to the Special Issue Microstructure and Properties of Metals and Alloys)
  • Article
  • Open Access
5 Citations
3,917 Views
19 Pages

Microstructure and Mechanical Properties of High-Speed Train Wheels: A Study of the Rim and Web

  • Chun Gao,
  • Yuanyuan Zhang,
  • Tao Fan,
  • Jia Wang and ,
  • Huajian Song and
  • Hang Su
  • + 1 author+ 0 author

25 July 2025

High-speed trains have revolutionized modern transportation with their exceptional speeds, yet the essence of this technological breakthrough resides in the train’s wheels. These components are engineered to endure extreme mechanical stresses w...

(This article belongs to the Special Issue Fatigue and Fracture of Crystalline Metal Structures)
  • Article
  • Open Access
12 Citations
3,052 Views
11 Pages

Experimental Study of the Microhardness and Microstructure of a Copper Specimen Using the Taylor Impact Test

  • Sergey A. Zelepugin,
  • Nadezhda V. Pakhnutova,
  • Olga A. Shkoda and
  • Evgenii N. Boyangin

19 December 2022

One commonly used method for characterizing the dynamic characteristics of materials is the Taylor impact test. This method measures the dynamic yield strength of cylindrical specimens and determines material model constants required for the numerica...

  • Article
  • Open Access
1 Citations
4,999 Views
7 Pages

Study on the Microstructure and Spectra of Regrown Quartz Crystals from Chinese Jewelry Market

  • Danyi Zhou,
  • Taijin Lu,
  • Huiru Dai,
  • Jieran Lv and ,
  • Shouming Chen,
  • Zhonghua Song and
  • Jian Zhang
  • + 2 authors+ 0 author

19 September 2021

Regrown quartz crystals consist of the natural section and the synthetic section grown by hydrothermal technique, which has become popular on the Chinese jewelry market in recent years. Similar gemological properties to those of natural quartz have b...

(This article belongs to the Special Issue Gem Crystals)
  • Article
  • Open Access
5 Citations
4,223 Views
12 Pages

23 July 2019

The shape accuracy of microstructures is an important factor that directly affects the quality and performance of products. Nevertheless, it is difficult to find a study for the shape accuracy of microstructures below several microns. This study aime...

(This article belongs to the Special Issue The High Efficiency Machining Process and Machining of Complex Materials)
  • Article
  • Open Access
12 Citations
4,455 Views
15 Pages

20 March 2020

In order to study the microstructure characteristics of an axially braided Carbon/Carbon (C/C) composite, a comprehensive observation and study of the mesoscopic and microstructure characteristics of an axially braided C/C composite is conducted. Sca...

(This article belongs to the Section Carbon Materials)
  • Article
  • Open Access
13 Citations
3,818 Views
13 Pages

4 March 2021

Additively manufactured tungsten and its alloys have been widely used for plasma facing components (PFCs) in future nuclear fusion reactors. Under the fusion process, PFCs experience a high-temperature exposure, which will ultimately affect the micro...

  • Article
  • Open Access
26 Citations
4,929 Views
13 Pages

Experimental Study on Microstructure of Unsaturated Expansive Soil Improved by MICP Method

  • Xinpei Yu,
  • Hongbin Xiao,
  • Zhenyu Li,
  • Junfeng Qian and ,
  • Shenping Luo and
  • Huanyu Su
  • + 1 author+ 0 author

30 December 2021

The soil water characteristic curve and microstructure evolution of unsaturated expansive soil improved by microorganisms in Nanning, Guangxi were studied by means of filter paper method and scanning electron microscope imaging (SEM). Based on Fredlu...

(This article belongs to the Special Issue Advances in Soil Pollution and Geotechnical Environment)
  • Article
  • Open Access
5 Citations
3,558 Views
13 Pages

7 August 2022

In this article, an innovative GaN-based trench current-aperture vertical electron transistor (CAVET) with a stepped doping microstructure is proposed and studied using Silvaco-ATLAS. According to the simulation and analyzed characteristics, the best...

(This article belongs to the Special Issue III–V Compound Semiconductors and Devices)
  • Article
  • Open Access
645 Views
18 Pages

6 May 2026

Copper-bearing low-carbon high-strength steels are widely employed in marine engineering. However, the microstructural homogeneity, strength–toughness matching, and low-temperature toughening mechanisms of such steels at high copper contents re...

  • Article
  • Open Access
22 Citations
4,530 Views
14 Pages

10 March 2020

This paper established a microstructure-related hardness model of a polycrystalline Ni-based superalloy GH4720Li, and the sizes and area fractions of γ’ precipitates were extracted from scanning electron microscope (SEM) images using a de...

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
2 Citations
3,162 Views
12 Pages

Study on the Correlation between the Microstructure Characteristics and Corrosion Behaviors of 2A12-T4 Aluminum Alloy under Thermal Strain

  • Shuaihao Qian,
  • Timing Zhang,
  • Yuhua Chen,
  • Hongxiang Li and ,
  • Jilin Xie and
  • Peng He
  • + 1 author+ 0 author

6 June 2021

In this study, the welding thermal simulation technology was used to prepare samples under different peak temperatures and strain levels in order to reveal the effects of thermal strain on the microstructure characteristics and corrosion resistance o...

  • Article
  • Open Access
3 Citations
1,207 Views
10 Pages

Study on the Influence of Heat Input on Microstructure and Properties of Q420C Steel Welded Joints

  • Hanxin Long,
  • Guoping Wang,
  • Pingxin Wang,
  • Jinjun Ma and ,
  • Xiong Luo and
  • Huan He
  • + 1 author+ 0 author

16 August 2025

The occurrence of the welding heat-affected zone in Q420C steel may lead to a reduction in the toughness of the welded joint and disruption of high strength-toughness combination of Q420C. This study investigates the microstructure and mechanical pro...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
12 Citations
2,822 Views
12 Pages

13 September 2024

Conventional analytical formulas for predicting the effective Young’s modulus of porous materials often rely on simplifying assumptions and do not explicitly incorporate microstructural information. This study investigates the impact of regular...

(This article belongs to the Section Porous Materials)
  • Article
  • Open Access
21 Citations
4,603 Views
15 Pages

25 September 2017

Today, the characterisation of the microstructure of cement-based materials using non-destructive techniques has become an important topic of study, and among them, the impedance spectroscopy has recently experienced great progress. In this research,...

  • Article
  • Open Access
40 Citations
4,043 Views
16 Pages

27 May 2020

Just as it is regarding ordinary cement-based materials, the pore structure and microstructure of alkali-activated materials are disordered. It is essential to predict the macroscopic properties by studying the pore and microstructure fractal charact...

(This article belongs to the Collection Alkali‐Activated Materials for Sustainable Construction)
  • Article
  • Open Access
1,345 Views
19 Pages

Concrete is popular in construction due to its strong performance and low maintenance. However, some structures become unsafe over time due to poor maintenance and design flaws. As demand for maintenance grows, restoring older structures is a cost-ef...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
4 Citations
2,334 Views
16 Pages

Study on Mechanism of Microstructure Refinement by Ultrasonic Cavitation Effect

  • Chang Li,
  • Shuchao Li,
  • Jiabo Liu,
  • Yichang Sun and ,
  • Yuhao Wang and
  • Fanhong Kong
  • + 1 author+ 0 author

17 November 2024

During the solidification process of the alloy, the temperature lies in the range between the solid-phase line and the liquidus. Dendrite growth exhibits high sensitivity to even slight fluctuations in temperature, thereby significantly influencing t...

(This article belongs to the Special Issue Effects of Laser Treatment on Surface Characterization and Mechanical Properties of Alloys, 2nd Edition)
  • Article
  • Open Access
4 Citations
5,040 Views
18 Pages

6 August 2020

Understanding the microstructure of rhyolites may greatly promote exploration efforts on rhyolitic hydrocarbon reservoirs; however, related studies are sparse. In this contribution, the microstructure and related porosity of oil-bearing rhyolitic lav...

(This article belongs to the Special Issue Microtexture Characterization of Rocks and Minerals)
  • Article
  • Open Access
18 Citations
4,729 Views
12 Pages

A Novel Computational Method of Processing Map for Ti-6Al-4V Alloy and Corresponding Microstructure Study

  • Ming Hu,
  • Limin Dong,
  • Zhiqiang Zhang,
  • Xiaofei Lei and ,
  • Rui Yang and
  • Yuhui Sha
  • + 1 author+ 0 author

3 September 2018

The Arrhenius-type constitutive equation is mostly used to describe flow behaviors of material. However, no processing map has been constructed directly according to it. In this study, a novel computational method was applied for establishing the pro...

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
504 Views
16 Pages

16 May 2026

To eliminate lack-of-fusion (LoF) defects at partition interfaces during laser powder bed fusion of titanium alloys, this study proposes a multi-layer, partitioned-scanning strategy with staggered interfaces. The strategy was optimized through an ort...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
368 Views
27 Pages

7 October 2026

Diamond-reinforced sintered silver composites are considered promising thermal interface materials (TIMs) for power electronic packaging due to their combination of high thermal conductivity and mechanical reliability. This paper proposes and validat...

(This article belongs to the Special Issue Advanced Electronic Materials: Processing, Modeling, Failure Mechanisms, and Reliability)
  • Article
  • Open Access
8 Citations
3,244 Views
18 Pages

Study on the Physical, Chemical and Nano-Microstructure Characteristics of Asphalt Mixed with Recycled Eggshell Waste

  • Guanyu Ji,
  • Xuancang Wang,
  • Yuchen Guo,
  • Yi Zhang and ,
  • Qinglian Yin and
  • Yaolu Luo
  • + 1 author+ 0 author

10 October 2021

Green economy is a major them of sustainable development. The application of biological waste in engineering is conducive to green development. This study reveals the effect of recycled eggshell waste on the physical and chemical properties as well a...

(This article belongs to the Special Issue Green Roadways and Management Sustainability)
  • Article
  • Open Access
4 Citations
1,706 Views
15 Pages

12 December 2023

Silicate-based nano- and micro-sized binders were used with ordinary Portland cement to evaluate their influence on the setting time, activation energy, mechanical properties, and microstructure. It was found that the setting time was reduced due to...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
11 Citations
4,265 Views
16 Pages

A Simulation Study on the Crack Propagation Behavior of Nanostructured Thermal Barrier Coatings with Tailored Microstructure

  • Lei Zhang,
  • Yu Wang,
  • Wei Fan,
  • Yuan Gao and ,
  • Yiwen Sun and
  • Yu Bai
  • + 1 author+ 0 author

23 July 2020

The initiation and propagation of cracks are crucial to the reliability and stability of thermal barrier coatings (TBCs). It is important and necessary to develop an effective method for the prediction of the crack propagation behavior of TBCs. In th...

(This article belongs to the Section Corrosion, Wear and Erosion)
  • Article
  • Open Access
18 Citations
4,187 Views
17 Pages

23 September 2020

Microstructures of typical carbon fibers (CFs) from polyacrylonitrile (PAN) and pitch-based precursors were studied using a novel digital twin approach with individual carbon fibers for a local crystal scale model. The transmission electron microscop...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
393 Views
29 Pages

Study on the Influence Mechanism of Mineral Admixtures on Hydration and Microstructure of Yellow River Sediment-Based Shotcrete

  • Ge Zhang,
  • Chen Chen,
  • Zekun Dong,
  • Jialing Li and ,
  • Kunpeng Li,
  • Ali Raza and
  • Chengfang Yuan
  • + 2 authors+ 0 author

11 June 2026

This study investigates the effects and mechanisms of three mineral admixtures—fly ash (FA), silica fume (SF), and metakaolin (MK)—on the fresh, mechanical, and microstructural properties of Yellow River sediment (YRS)-based shotcrete. A...

(This article belongs to the Special Issue Recycling and Repurposing of Waste Materials for Sustainable Green Composites)
  • Communication
  • Open Access
6 Citations
4,011 Views
15 Pages

Impact of Microstructure on Sensing Performance of Fiber-Based Iontronic Pressure Sensors: A Comparative Study

  • Cheng Liu,
  • Jiaxin Xu,
  • Shiman Yang,
  • Yihan Xu and ,
  • Jianyu Wang,
  • Xiaoqing Liu,
  • Li Wang and
  • Yichun Ding
  • + 3 authors+ 0 author

3 November 2025

Highly sensitive flexible pressure sensors are crucial for wearable health monitoring and human–machine interaction. While the emerging iontronic sensors inherently offer high sensitivity, this can be further improved by engineering microstruct...

(This article belongs to the Special Issue Flexible and Wearable Sensors: Design, Fabrication Methods, and Applications)
  • Article
  • Open Access
5 Citations
1,623 Views
23 Pages

17 May 2025

In order to study the microstructure evolution of polytetrafluoroethylene–copper (PTFE-Cu) composites under compression load and reveal the molecular dynamics mechanism of deformation failure, three PTFE-Cu composites with different densities (...

(This article belongs to the Section Polymer Analysis and Characterization)
  • Article
  • Open Access
2 Citations
1,756 Views
15 Pages

13 December 2024

This study explores the fatigue behavior and fracture mechanisms of TC11 titanium alloy formed by laser metal deposition (LMD) and subjected to double annealing. The research focuses on how the alloy’s unique microstructure, consisting of alter...

  • Article
  • Open Access
2,111 Views
20 Pages

Study on the Microstructure of Mg-4Zn-4Sn-1Mn-xAl As-Cast Alloys

  • Junlin Liu,
  • Zhiwei Du,
  • Yonggang Peng,
  • Rongguang Jia and ,
  • Xiaolei Han,
  • Minglong Ma and
  • Ting Li
  • + 2 authors+ 0 author

31 October 2023

In this study, the microstructure of the Mg-4Zn-4Sn-1Mn-xAl (x = 0, 0.3 wt.%, denoted as ZTM441 and ZTM441-0.3Al) as-cast alloys was investigated using scanning electron microscopy (SEM), focused-ion/electron-beam (FIB) micromachining, transmission e...

  • Article
  • Open Access
3 Citations
2,290 Views
18 Pages

Study on the Effects of GO on the Microstructure and Wear Resistance of CuCrZr Plasma Cladding Coatings

  • Yang Wang,
  • Hongjun Xiang,
  • Zhiming Qiao,
  • Jianwei Zhen and ,
  • Qing-Ao Lv,
  • Xichao Yuan,
  • Chunyan Liang and
  • Genrong Cao
  • + 3 authors+ 0 author

16 June 2024

This study investigates the enhancement of wear resistance in CuCrZr rails through the plasma cladding of CuCrZr-GO coatings with a varying graphene oxide (GO) content. The microstructure, phase composition, and mechanical properties of CuCrZr coatin...

(This article belongs to the Section High-Energy Beam Surface Engineering and Coatings)
  • Article
  • Open Access
7 Citations
4,005 Views
12 Pages

Study of Microstructure and Mechanical Properties of Electrodeposited Cu on Silicon Heterojunction Solar Cells

  • Jeff Shan,
  • Chung-Hsuan Shan,
  • Craig Huang,
  • Yu-Ping Wu and ,
  • Yuan-Kai Lia and
  • Wen-Jauh Chen
  • + 1 author+ 0 author

2 July 2023

This study investigated the use of a pure copper seed layer to improve the adhesion strength and reduce the residual stress of electroplated copper films for heterojunction technology in crystalline solar cells. The experiment involved depositing a c...

(This article belongs to the Special Issue Feature Papers in Crystallography and Applications of Metallic Materials)
  • Article
  • Open Access
3 Citations
2,986 Views
11 Pages

Study on Microstructure and Properties of NM500/Q345 Clad Plates at Different Austenitization Temperatures

  • Guanghui Zhao,
  • Ruifeng Zhang,
  • Juan Li,
  • Cuirong Liu and ,
  • Huaying Li and
  • Yugui Li
  • + 1 author+ 0 author

1 October 2022

In this paper, the change in the mechanical properties of a composite plate was studied using the heat treatment method, and it was found that the performance of the composite plate was greatly improved under the process of quenching at 900 °C an...

(This article belongs to the Special Issue Dynamic Behavior of Materials)
  • Article
  • Open Access
1,384 Views
12 Pages

17 March 2025

This study systematically investigates how Fe-Ti atomic ratios (1:1, 1:2, and 2:1) influence the microstructure, mechanical properties, and softening resistance of Cu-Fe-Mg-Ti alloys under fixed total Fe + Ti content. Through hardness testing, electr...

of 404