Skip to Content

189 Results Found

  • Article
  • Open Access
18 Citations
4,418 Views
17 Pages

Tribological Performance of Microhole-Textured Carbide Tool Filled with CaF2

  • Wenlong Song,
  • Shoujun Wang,
  • Yang Lu and
  • Zixiang Xia

7 September 2018

To enhance the friction and wear performance of cemented carbide, textured microholes were machined on micro Electron Discharge Machining (EDM) on the tool rake face, and Calcium Fluoride (CaF2) powders were burnished into the microholes. The frictio...

(This article belongs to the Special Issue Surface Modification to Improve Properties of Materials)
  • Article
  • Open Access
14 Citations
3,744 Views
12 Pages

Research on Microhole Processing Technology Based on the Femtosecond-Laser Spiral Trepanning Method

  • Fengping Li,
  • Guang Feng,
  • Xiaojun Yang,
  • Xiaogang Li and ,
  • Guang Ma and
  • Chengji Lu
  • + 1 author+ 0 author

26 October 2020

Microholes have crucial applications in aerospace, the automotive industry, and other industries. In this study, the microhole processing technology based on the femtosecond-laser spiral trepanning method was investigated. By adjusting the spiral sca...

(This article belongs to the Section Applied Industrial Technologies)
  • Article
  • Open Access
2 Citations
2,522 Views
13 Pages

Rapid Fabrication of Yttrium Aluminum Garnet Microhole Array Based on Femtosecond Bessel Beam

  • Heng Yang,
  • Yuan Yu,
  • Tong Zhang,
  • Shufang Ma and ,
  • Lin Chen,
  • Bingshe Xu and
  • Zhiyong Wang
  • + 2 authors+ 0 author

High-aspect-ratio microholes, the fundamental building blocks for microfluidics, optical waveguides, and other devices, find wide applications in aerospace, biomedical, and photonics fields. Yttrium aluminum garnet (YAG) crystals are commonly used in...

(This article belongs to the Special Issue Laser Processing and Modification of Materials)
  • Article
  • Open Access
16 Citations
11,060 Views
12 Pages

Raman-Spectroscopy Based Cell Identification on a Microhole Array Chip

  • Ute Neugebauer,
  • Christian Kurz,
  • Thomas Bocklitz,
  • Tina Berger and ,
  • Thomas Velten,
  • Joachim H. Clement,
  • Christoph Krafft and
  • Jürgen Popp
  • + 3 authors+ 0 author

22 April 2014

Circulating tumor cells (CTCs) from blood of cancer patients are valuable prognostic markers and enable monitoring responses to therapy. The extremely low number of CTCs makes their isolation and characterization a major technological challenge. For...

(This article belongs to the Collection Lab-on-a-Chip)
  • Article
  • Open Access
7 Citations
4,696 Views
18 Pages

Study on the Electrochemical Deburring for the External Surface of the Microhole Caused by Mechanical Drilling Process

  • Tao He,
  • Sen Huang,
  • Siyuan Fang,
  • Haishun Deng and ,
  • Qingtian Ding and
  • Mingwen Zhang
  • + 1 author+ 0 author

25 August 2022

To improve the performance of electrochemical deburring for microhole drilling (MD-ECD), the distribution and dynamic change of the current density in the machining area during the electrolysis process were analyzed, and the synchronous change relati...

(This article belongs to the Section Material Processing Technology)
  • Article
  • Open Access
12 Citations
2,617 Views
15 Pages

22 September 2023

Because of the ease with which oxide films form on its surfaces, stainless steel has strong corrosion resistance and excellent processing performance. Electrochemical machining (ECM) is a flexible process that can create microstructures on stainless...

(This article belongs to the Section E: Engineering and Technology)
  • Article
  • Open Access
9 Citations
2,698 Views
20 Pages

21 December 2023

Material jetting technology is gaining popularity, especially in polymer science, because of their high accuracy for additive manufacturing (AM) products. This paper aims to investigate the quality of micro-holes that are oriented in three basic dire...

(This article belongs to the Special Issue Polymeric Materials and Their Application in 3D Printing)
  • Article
  • Open Access
17 Citations
3,529 Views
17 Pages

4 November 2022

Aerostatic bearings are widely used in ultra-precision manufacturing equipment as a crucial support component. However, turbulent vortices in the recess can induce micro-vibration of the aerostatic bearing, which can severely affect stability. To fur...

(This article belongs to the Special Issue State-of-the-Art of Tribology in China)
  • Article
  • Open Access
5 Citations
1,561 Views
16 Pages

Performance Investigation of the Micro-Hole High-Speed Aerostatic Thrust Bearing Based on the Finite Element Method

  • Siyu Gao,
  • Tianle Jiang,
  • Zhuang Li,
  • Hongbin Yang and ,
  • Min Zhu,
  • Youyun Shang,
  • Laiyun Song,
  • Lihua Lu,
  • Qiang Gao and
  • Hanqian Zhang
  • + 5 authors+ 0 author

Micro-hole aerostatic bearings have emerged as critical components in ultra-precision machining systems, offering a superior load capacity, stiffness, and stability compared to traditional orifice-based designs. These enhancements are primarily attri...

(This article belongs to the Section Advanced Manufacturing)
  • Article
  • Open Access
2 Citations
2,872 Views
16 Pages

High-speed mechanical drilling based on the micro-bit is the mainstream process technology for machining micro-holes in the printed circuit board (PCB). However, the above process to obtain PCB micro-holes is prone to defects, such as hole burrs and...

  • Review
  • Open Access
12 Citations
5,284 Views
20 Pages

The increased demand for miniature components has drawn the attention of researchers, engineers, and industry users to manufacture precision micro and mesoholes on foils, sheets, and plates made from a variety of engineering materials. These days, mi...

(This article belongs to the Special Issue Micro/Nano-Functional Structures: Design, Manufacturing, Characterization and Applications)
  • Article
  • Open Access
7 Citations
4,064 Views
14 Pages

Characterization of Micro-Holes Drilled Using a UV Femtosecond Laser in Modified Polyimide Flexible Circuit Boards

  • Lijuan Zheng,
  • Shuzhan Lin,
  • Huijuan Lu,
  • Bing Huang and ,
  • Yu Liu,
  • Jun Wang,
  • Xin Wei,
  • Jun Wang and
  • Chengyong Wang
  • + 4 authors+ 0 author

26 August 2024

Modified polyimide (MPI) flexible printed circuits (FPCs) are used as chip carrier boards. The quality of the FPC directly affects the reliability of the integrated circuit. Furthermore, micro-holes are critical components of FPCs. In this study, an...

(This article belongs to the Special Issue Ultrafast Laser Processing of Difficult-to-Machine Materials and Micro/Nano Structures)
  • Feature Paper
  • Article
  • Open Access
4 Citations
3,042 Views
15 Pages

15 December 2023

Micro-drilled aluminum surfaces containing micro-holes were anodized to produce nanopores over the machined and lapped surfaces. The anodized nanopores had an approximate diameter of 30–40 nm and a depth distribution of 20–30 μm from t...

(This article belongs to the Special Issue Selected Papers from the K-TRIB2023)
  • Feature Paper
  • Article
  • Open Access
23 Citations
4,825 Views
15 Pages

8 September 2021

This paper uses an ultrasonic vibration-integrated array electrode for 301 stainless steel micro-hole drilling. The influence of machining parameters such as ultrasonic vibration amplitude, working voltage, pulse-off time and electrode feed rate on d...

(This article belongs to the Special Issue New Frontiers in Magnetic Polishing and Electrochemical Technology)
  • Article
  • Open Access
26 Citations
3,437 Views
19 Pages

Experimental Investigation of Water Jet-Guided Laser Micro-Hole Drilling of Cf/SiC Composites

  • Binying Bao,
  • Guangyi Zhang,
  • Zhongan Chen,
  • Yang Chao and ,
  • Chunhai Guo and
  • Wenwu Zhang
  • + 1 author+ 0 author

24 April 2024

In this paper, water jet-guided laser (WJGL) drilling of Cf/SiC composites was employed and the effects of the processing parameters on the depth and quality of the micro-holes were systematically investigated. Firstly, the depth measurement showed t...

(This article belongs to the Special Issue Cutting Processes for Materials in Manufacturing)
  • Article
  • Open Access
8 Citations
2,111 Views
25 Pages

Fabrication of Micro-Holes with High Aspect Ratios in Cf/SiC Composites Using Coaxial Waterjet-Assisted Nanosecond Laser Drilling

  • Chenhu Yuan,
  • Zenggan Bian,
  • Yue Cao,
  • Yinan Xiao and ,
  • Bin Wang,
  • Jianting Guo and
  • Liyuan Sheng
  • + 2 authors+ 0 author

14 July 2025

In the present study, the coaxial waterjet-assisted nanosecond laser drilling of micro-holes in Cf/SiC composites, coupled with nanosecond laser drilling in air for fabricating micro-holes with high aspect ratios, were investigated. The surface morph...

(This article belongs to the Special Issue Optical and Laser Material Processing, 2nd Edition)
  • Article
  • Open Access
4 Citations
3,760 Views
12 Pages

Extensive Broadband Near-Infrared Emissions from GexSi1−x Alloys on Micro-Hole Patterned Si(001) Substrates

  • Kun Peng,
  • Ningning Zhang,
  • Jiarui Zhang,
  • Peizong Chen and ,
  • Jia Yan,
  • Changlin Zheng,
  • Zuimin Jiang and
  • Zhenyang Zhong
  • + 3 authors+ 0 author

28 September 2021

Broadband near-infrared (NIR) luminescent materials have been continuously pursued as promising candidates for optoelectronic devices crucial for wide applications in night vision, environment monitoring, biological imaging, etc. Here, graded GexSi1−...

(This article belongs to the Special Issue Nanotechnologies and Nanomaterials: Selected Papers from CCMR)
  • Review
  • Open Access
506 Views
22 Pages

7 August 2026

The advanced manufacturing of metal micro-holes is of great significance in various fields of industrial production, including aerospace, automotive, electronics, and healthcare. New technologies are constantly emerging, including various multi-energ...

(This article belongs to the Special Issue High-Energy Beam Machining of Metals)
  • Article
  • Open Access
20 Citations
9,846 Views
14 Pages

11 July 2020

Tungsten cemented carbide (WC-Co) is a widely applied material in micro-hole drilling, such as in suction nozzles, injection nozzles, and wire drawing dies, owing to its high wear resistance and hardness. Since the development of wire-electro-dischar...

(This article belongs to the Special Issue Micro-Electro Discharge Machining: Principles, Recent Advancements and Applications)
  • Article
  • Open Access
7 Citations
2,731 Views
18 Pages

Scheduling Optimization of Printed Circuit Board Micro-Hole Drilling Production Line Based on Complex Events

  • Qian Zhou,
  • Xupeng Hu,
  • Siyuan Peng,
  • Yonghui Li and ,
  • Tao Zhu and
  • Hongyan Shi
  • + 1 author+ 0 author

26 October 2023

The interdependence between the scheduling method and the production efficiency of a micro-hole drilling production line for printed circuit boards (PCBs) holds significant importance, necessitating the optimization of such a production line’s...

(This article belongs to the Special Issue Micro/Nano Manufacturing Processes: Theories and Optimization Techniques)
  • Article
  • Open Access
4 Citations
1,807 Views
13 Pages

13 January 2025

The electrochemical cutting technique, utilizing electrolyte flushing through micro-hole arrays in the radial direction of a tube electrode, offers the potential for cost-effective and high-surface-integrity machining of large-thickness, straight-sur...

(This article belongs to the Special Issue Ultra-Precision Machining of Difficult-to-Machine Materials)
  • Article
  • Open Access
3 Citations
2,047 Views
15 Pages

Modelling of Aerostatic Bearings with Micro-Hole Restriction

  • Dehong Huo,
  • Amir Fard,
  • Junliang Liu,
  • Ning Gou and
  • Kai Cheng

29 December 2025

Aerostatic bearings incorporating micro-hole restrictors with diameters on the order of tens of microns demonstrate superior static and dynamic stiffness characteristics, while significantly reducing air consumption, and are increasingly adopted in p...

(This article belongs to the Section Advanced Manufacturing)
  • Article
  • Open Access
9 Citations
7,523 Views
12 Pages

11 October 2018

Due to their hardness and low tool wear, tungsten carbides are widely used in industrial applications, such as spray nozzles, wire drawing dies and spinning nozzles. However, there is no conventional machining process that is capable of fabricating m...

  • Article
  • Open Access
12 Citations
4,278 Views
13 Pages

Elimination of Hole Mouth Burr in Multilayer PCB Micro-Hole by Using Micro-EDM

  • Xinke Feng,
  • Bin Xu,
  • Jianguo Lei,
  • Xiaoyu Wu and ,
  • Feng Luo and
  • Lianyu Fu
  • + 1 author+ 0 author

12 June 2021

The micro-hole is a key structure in multilayer printed circuit board (PCB), as it enables the effective transmission of electrical signals. At present, the most common way to machine PCB micro-holes is mechanical drilling using micro-bit. However, i...

  • Article
  • Open Access
7 Citations
8,660 Views
13 Pages

19 January 2018

Ultra-precision products which contain a micro-hole array have recently shown remarkable demand growth in many fields, especially in the semiconductor and display industries. Photoresist etching and electrochemical machining are widely known as preci...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
1 Citations
1,479 Views
18 Pages

A Study on the Influence of Central Edge Absence in Helical Grinding for Micro-Hole Fabrication

  • Bochuan Chen,
  • Xiaojin Shi,
  • Chong Zhang,
  • Muhammad Amin and
  • Songmei Yuan

29 October 2024

The fabrication of micro-holes in hard-to-machine materials presents considerable challenges in precision machining. This study proposes a novel approach that employs high-strength micro-grinding tools with a central abrasive grain absence to create...

  • Article
  • Open Access
8 Citations
2,144 Views
15 Pages

Experimental Investigation of the Machining Characteristics in Graphite-Powder-Mixed Electrochemical Discharge Machining of Microholes in Glass

  • Weidong Tang,
  • Jikai Yao,
  • Jize Zhang,
  • Quancai Zhao and ,
  • Lixiang Fan,
  • Cong Mao,
  • Xiaoming Kang,
  • Xuyu Li and
  • Shuhan Chen
  • + 4 authors+ 0 author

22 September 2023

The effect of graphite powder on the machining characteristics in graphite-powder-mixed electrochemical discharge machining of microholes was still not clear. How the discharge mechanism changed with the addition of graphite powder into the electroly...

(This article belongs to the Special Issue Advanced Manufacturing Technology and Systems, 3rd Edition)
  • Article
  • Open Access
14 Citations
4,000 Views
26 Pages

Improvement of Micro-Hole Processing in SiCf/SiC Ceramic Matrix Composite Using Efficient Two-Step Laser Drilling

  • Yue Cao,
  • Bin Wang,
  • Zhehang Li,
  • Jiajia Wang and ,
  • Yinan Xiao,
  • Qingyang Zeng,
  • Xinfeng Wang,
  • Wenwu Zhang,
  • Qunli Zhang and
  • Liyuan Sheng
  • + 5 authors+ 0 author

2 April 2025

SiCf/SiC ceramic matrix composite (CMC), a hard and brittle material, faces significant challenges in efficient and high-quality processing of small-sized shapes. To address these challenges, the nanosecond laser was used to process micro-holes in th...

(This article belongs to the Special Issue Optical and Laser Material Processing, 2nd Edition)
  • Feature Paper
  • Article
  • Open Access
1,043 Views
11 Pages

Optical Performance Analysis of Anti-Reflective Microholes with Different Arrangements Fabricated by Femtosecond Laser Zigzag Scanning

  • Yulong Ding,
  • Cong Wang,
  • Zheng Gao,
  • Xiang Jiang and ,
  • Shiyu Wang,
  • Xianshi Jia,
  • Linpeng Liu and
  • Ji’an Duan
  • + 3 authors+ 0 author

25 January 2026

A femtosecond laser serves as an excellent tool for efficiently fabricating large-area anti-reflective microhole arrays on infrared windows. The impact of the arrangement of the microholes during processing on final performance, however, remains uncl...

(This article belongs to the Special Issue Recent Progress in Optical Quantum Information and Communication)
  • Article
  • Open Access
349 Views
23 Pages

Aerostatic journal bearings with small-hole restrictors are widely adopted due to their superior stiffness, making them effective solutions to meet the growing demands for improved stability and higher rotational speeds in precision machinery. In thi...

  • Feature Paper
  • Article
  • Open Access
10 Citations
5,436 Views
12 Pages

2 January 2020

Wire electrochemical machining (WECM) has great advantages and potential for fabricating parts with ruled surfaces made of difficult-to-machine materials. Characterized by a relatively short flow path, a pulsating radial electrolyte supply in WECM is...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
345 Views
26 Pages

High-Quality Deep Micro-Holes with Near-Zero Taper Efficiently Processed in CFRP Using a Picosecond Fiber Laser

  • Kang Li,
  • Jichao Yang,
  • Chaowei Sun,
  • Mengqi Suo and ,
  • Mingyang Xin,
  • Donghai Feng,
  • Shian Zhang,
  • Tianqing Jia,
  • Zhenrong Sun and
  • Hongxing Xu
  • + 5 authors+ 0 author

24 September 2026

Carbon fiber reinforced polymer (CFRP) is extensively utilized in aerospace, transportation, and particularly in the rapidly evolving low-altitude economy sector represented by unmanned aerial vehicles and electric vertical take-off and landing aircr...

(This article belongs to the Special Issue Fiber-Reinforced Polymers: Manufacture, Properties and Applications—Third Edition)
  • Article
  • Open Access
9 Citations
2,691 Views
16 Pages

20 January 2024

The geometric accuracy and surface quality of thin-film cooling holes have a significant impact on the cooling efficiency and fatigue life of aeroengine turbine blades. In this paper, we conducted experimental research on the processing of nickel-bas...

(This article belongs to the Special Issue Advanced Surface Technology and Application)
  • Article
  • Open Access
4 Citations
1,378 Views
24 Pages

Machinability of Drilling on Metallic Glass for Micro-Hole with Renewable Dielectric in an Electric Discharge Machining Process

  • Liwei Li,
  • Chen Cao,
  • Yangjing Zhao,
  • Shuo Sun and ,
  • Jinguang Du and
  • Wuyi Ming
  • + 1 author+ 0 author

7 April 2025

Electric discharge machining (EDM) stands out for its ability to perform no-contact machining of materials with desired forms by multi-pulse discharges. In this investigation, the machinability of drilling on Ti56Zr18Cu12, metallic glass, for micro-h...

(This article belongs to the Section Additive Manufacturing)
  • Communication
  • Open Access
14 Citations
4,898 Views
12 Pages

New Intermittent Urinary Micro-Hole Zone Catheter Shows Enhanced Performance in Emptying the Bladder: A Randomised, Controlled Crossover Study

  • Malene Hornbak Landauro,
  • Lotte Jacobsen,
  • Fabio Tentor,
  • Troels Pedersen and ,
  • Cecilie Rovsing,
  • Omar Feix do Nascimento and
  • Michael Kennelly
  • + 2 authors+ 0 author

13 August 2023

Urinary tract infections (UTIs) are common and troublesome complications of clean intermittent catheterisation (CIC) in individuals suffering from incomplete bladder emptying, which may exacerbate the underlying disease and lead to hospitalisation. A...

(This article belongs to the Topic The Use of New Technologies for Health and Clinical Practice)
  • Article
  • Open Access
13 Citations
4,934 Views
18 Pages

1 October 2018

The present study investigated high-aspect ratio micro-hole array parts which were made by ZrO2 micro-powder with different particle sizes and micro-powder injection molding technology. It analysed the influence of particle sizes on feedstock, debind...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
139 Views
17 Pages

4 November 2026

ZrB2–SiC ultra-high-temperature ceramics have important aerospace applications, but their high hardness and brittleness make conventional machining difficult. This study investigated micro-hole electrical discharge machining (micro-EDM) of ZrB2...

(This article belongs to the Section D: Materials and Processing)
  • Communication
  • Open Access
4 Citations
3,353 Views
10 Pages

16 August 2023

Near-infrared (NIR) photodetectors (PDs) have attracted much attention for use in noninvasive medical diagnosis and treatments. In particular, self-filtered NIR PDs are in high demand for a wide range of biomedical applications due to their ability f...

(This article belongs to the Section Electronic Sensors)
  • Article
  • Open Access
280 Views
14 Pages

27 September 2026

Finite-length raster scanning can cause endpoint over-ablation, whereas repeated scanning along a fixed direction can reinforce directional bottom textures. In this study, skywriting-based synchronized gating was combined with four-direction orthogon...

(This article belongs to the Special Issue Solid-State Laser and Frequency Conversion Technologies)
  • Article
  • Open Access
11 Citations
3,309 Views
14 Pages

Investigation on Thermal Barrier Coating Damages for Ultrafast Laser Drilling of Cooling Holes

  • Shaojian Wang,
  • Yue Hu,
  • Yangjie Zuo,
  • Zenan Yang and
  • Ruisong Jiang

31 July 2023

To mitigate the challenges pertaining to coating damage and processing defects arising from the utilization of ultrafast laser drilling for microhole creation in thermal barrier coatings (TBCs), thereby exerting substantial influence on the long-term...

  • Article
  • Open Access
2 Citations
3,030 Views
15 Pages

Effects of Ambient Temperature on Nanosecond Laser Micro-Drilling of Polydimethylsiloxane (PDMS)

  • Ya Lu,
  • Chaoran Lin,
  • Minghui Guo,
  • Youmin Rong and ,
  • Yu Huang and
  • Congyi Wu
  • + 1 author+ 0 author

29 December 2022

In this research, effects of ambient temperature (−100 °C–200 °C) on nanosecond laser micro-drilling of polydimethylsiloxane (PDMS) was investigated by simulation and experiment. A thermo-mechanical coupled model was established,...

(This article belongs to the Special Issue Ultrafast Laser Processing of Difficult-to-Machine Materials and Micro/Nano Structures)
  • Article
  • Open Access
14 Citations
3,381 Views
16 Pages

10 August 2023

Micro-hole is widely used in various fields, and common machining methods of micro-hole in factories are drilling and electrical discharge machining (EDM), but because of low machining efficiency, these methods cannot meet requirements. Therefore, it...

  • Article
  • Open Access
8 Citations
4,830 Views
10 Pages

Controlling the evaporation process of a droplet is of the utmost importance for a number of technologies. Also, along with the advances of microfabrication, micropatterned surfaces have emerged as an important technology platform to tune the wettabi...

(This article belongs to the Section Innovations in Materials Science and Materials Processing)
  • Article
  • Open Access
6 Citations
3,731 Views
17 Pages

17 February 2022

This paper focuses on the fabrication of high-quality novel products using a µEDM process variant called Reverse-µEDM. The tool plate required for the Reverse-µEDM is fabricated using Nd: YAG-based laser beam micromachining (LB&micr...

(This article belongs to the Special Issue Micro-Electro Discharge Machining: Principles, Recent Advancements and Applications, Volume II)
  • Article
  • Open Access
2 Citations
1,139 Views
11 Pages

Experimental Study of Glow Discharge Polymer Film Ablation with Shaped Femtosecond Laser Pulse Trains

  • Qinxin Wang,
  • Weiwei Xu,
  • Xue Wang,
  • Dandan Shi and ,
  • Jingyuan Wang,
  • Liyan Zhao,
  • Yasong Cui,
  • Mingyu Zhang,
  • Jia Liu and
  • Zhan Hu
  • + 5 authors+ 0 author

17 October 2025

A glow discharge polymer (GDP) has unique physical properties—transparency, brittleness, and hardness—that pose challenges for traditional mechanical machining techniques. We have investigated the microhole fabrication of GDP films using...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
36 Citations
4,264 Views
19 Pages

Effect of Conductive Coatings on Micro-Electro-Discharge Machinability of Aluminum Nitride Ceramic Using On-Machine-Fabricated Microelectrodes

  • Asif Rashid,
  • Azat Bilal,
  • Chong Liu,
  • M. P. Jahan and ,
  • Didier Talamona and
  • Asma Perveen
  • + 1 author+ 0 author

11 October 2019

The objective of this study is to investigate the feasibility of machining micro-holes on the non-conductive Aluminum Nitride (AlN) ceramics using micro-electro-discharge machining (EDM) process by exploiting various coating techniques. Although cera...

  • Article
  • Open Access
24 Citations
4,479 Views
11 Pages

Study on Surface Roughness of Gcr15 Machined by Micro-Texture PCBN Tools

  • Chen Pan,
  • Qinghua Li,
  • Kaixing Hu,
  • Yuxin Jiao and
  • Yumei Song

17 September 2018

This paper applies micro textures to the rake face of PCBN (Polycrystalline Cubic Boron Nitride) tools, including three types of micro textures that are microgroove textures vertical to the cutting edge, microgroove textures parallel to the cutting e...

  • Article
  • Open Access
10 Citations
9,579 Views
13 Pages

Development of Touch Probing System Using a Fiber Stylus

  • Hiroshi Murakami,
  • Akio Katsuki and
  • Takao Sajima

11 August 2016

This paper presents a system that can be used for micro-hole measurement; the system comprises an optical fiber stylus that is 5 µm in diameter. The stylus deflects when it comes into contact with the measured surface; this deflection is measured opt...

  • Article
  • Open Access
33 Citations
3,504 Views
11 Pages

Multi Response Optimization of ECDM Process for Generating Micro Holes in CFRP Composite Using TOPSIS Methodology

  • Manpreet Singh,
  • Sarbjit Singh,
  • Jatinder Kaur Arora,
  • Parvesh Antil and ,
  • Ankit D. Oza,
  • Dumitru Doru Burduhos-Nergis and
  • Diana Petronela Burduhos-Nergis
  • + 2 authors+ 0 author

3 December 2022

The applications of carbon fiber reinforced polymer composites (CFRPCs) in aerospace, automotive, electronics and lab-on-chip devices require precise machining processes. Over the past decade, there have been numerous attempts to machine CFRPCs using...

(This article belongs to the Special Issue Fiber-Reinforced Polymer-Based Composites: Processing, Characterization and Performance II)
  • Article
  • Open Access
23 Citations
5,472 Views
15 Pages

Precision EDM of Micron-Scale Diameter Hole Array Using in-Process Wire Electro-Discharge Grinding High-Aspect-Ratio Microelectrodes

  • Zhixiang Zou,
  • Zhongning Guo,
  • Qinming Huang,
  • Taiman Yue and ,
  • Jiangwen Liu and
  • Xiaolei Chen
  • + 1 author+ 0 author

26 December 2020

Micro-electrical discharge machining (micro-EDM) is a good candidate for processing micro-hole arrays, which are critical features of micro-electro-mechanical systems (MEMS), diesel injector nozzles, inkjet printheads and turbine blades, etc. In this...

of 4