Inductive power links are most viable for the long-term powering of cardiac pacemakers. Designing an inductive power link without surpassing the specific absorption rate (SAR) for modern leadless cardiac pacemakers (LCPs) remains a challenging task b...
When using the conventional two-coil inductive link for the simultaneous wireless power and data transmissions in implantable biomedical sensor devices, the strong power carrier could overwhelm the uplink data signal and even saturate the external up...
This paper presents a novel inductive link for wireless power transfer (WPT) system of electric vehicles (EVs). The WPT technology uses an alternating magnetic field to transfer electric power through space. The use of the WPT technology for charging...
The use of wireless communication using inductive links to transfer data and power to implantable microsystems to stimulate and monitor nerves and muscles is increasing. This paper deals with the development of the theoretical analysis and optimizati...
Wireless inductive-coupled power transfer and opportunity battery charging are very appealing techniques in drone applications. Weight and size are very critical constraints in drones, so the battery and the on-board electronics must be as light and...
This paper explores the feasibility of using a wireless Inductive Resonant Link (IRL) for wearable posture monitoring. The proposed system is based on magnetically coupled textile resonators and is implemented using a Single Input Multiple Output (SI...
DC link power supply systems that integrate power electronic converters are increasingly being adopted. In particular, emerging “source–load” systems, in which the DC link interfaces with converters, have attracted increasing resear...
This paper analyzes a resonant inductive wireless power transfer link using a single transmitter and multiple receivers. The link is described as an
In this study, a proposed Microwave-Induction Heating (MIH) scheme has been systematically studied to acquire suitable MIH parameters including chamber pressure, microwave power and heating time. The proposed MIH means that the thin indium tin oxide...
In this paper a general-purpose procedure for optimizing a resonant inductive wireless power transfer link adopting a multiple-input-multiple-output (MIMO) configuration is presented. The wireless link is described in a general–purpose way as a multi...
This paper presents an enhancement method to improve the performance of the DC-link voltage loop regulation in a Doubly-Fed Induction Generator (DFIG)- based wind energy converter. An intelligent, combined control approach based on a metaheuristics-t...
This paper outlines a design approach for biomedical wireless power transfer systems with a focus on three-coil inductive links for neonatal intensive care unit applications. The relevant literature has been explored to support the design approach, e...
Wireless Power Transfer (WPT) technology is gaining global popularity. However, in some applications, data transmission is also required to monitor the load states. This paper presents an alternative wireless power and data transmission method via th...
Inductive powering for implanted medical devices, such as implantable biosensors, is a safe and effective technique that allows power to be delivered to implants wirelessly, avoiding the use of transcutaneous wires or implanted batteries. Wireless po...
The inductive link is widely used in implantable biomedical sensor systems to achieve near-field communication (NFC) and wireless power transfer (WPT). However, it is tough to achieve reliable NFC on an inductive WPT link when the coupling coefficien...
The energy production future is dominated by renewable energy sources driven by global warming problems and aiming at the reduction of fossil fuel dependence. Wind energy is becoming competitive with fossil fuels considering its less price and less C...
In order to design a high efficiency Wireless Electric Vehicle Charging (WEVC) system, the design of the different system components needs to be optimized, particularly the design of a high-coupling, misalignment-tolerant inductive link (IL), compris...
The paper puts forward a method for predicting output voltage and resistance of a series-series (SS) compensated inductive wireless power transfer (IWPT) link operating at load-independent-voltage-output (LIVO) frequency. The link is a part of the st...
A new type of cross-linked chitosan was synthesized with Diethylene Triamine (DCCTS). The adsorption of Se (VI) on DCCTS was studied. The effect factors on adsorption and the adsorption mechanism were considered. The results indicated that the DCCTS...
Wind energy has become a cornerstone of sustainable electricity generation, yet the reliable integration of wind energy conversion systems (WECSs) into modern grids remains challenged by dynamic variations in wind speed and stringent fault ride-throu...
In this article, a novelty control structure of grid-connected doubly-fed induction generator (DFIG) based on a function link (FL)-based Wilcoxon radial basis function network (FLWRBFN) controller is proposed. The back-propagation (BP) method is used...
The penetration rate of electric vehicles (EVs) will experience a relative increment in the future, so easy to use ways to recharge will be demanded. In this sense, wireless charging represents a safe charging method that minimises user intervention....
High penetration of large capacity wind turbines into power grid has led to serious concern about its influence on the dynamic behaviors of the power system. Unbalanced grid voltage causing DC-voltage fluctuations and DC-link capacitor large harmonic...
Data-driven methods have prominently featured in the progressive research and development of modern condition monitoring systems for electrical machines. These methods have the advantage of simplicity when it comes to the implementation of effective...
The doubly-fed induction generator (DFIG) based on the control strategy of constant parameter virtual synchronous generator (VSG) can cause problems of sharp frequency variations in the grid-connected system, long adjustment times, and large overshoo...
The effects of varying modulation indices on the current and voltage harmonics of an induction motor (IM) powered by a three-phase space vector pulse-width modulation (SVM) inverter are presented in this research. The effects were examined using simu...
We propose an induction link based on overlapping arrays to eliminate blank spots on the electromagnetic field for moving object applications. We use two arrays of four aligned coils that have a 50% overlap between the two plates. This mechanism comp...
Towards a distributed neural interface, consisting of multiple miniaturized implants, for interfacing with large-scale neuronal ensembles over large brain areas, this paper presents a mm-sized free-floating wirelessly-powered implantable opto-electro...
With the development of communication technologies, the use of wireless systems in biomedical implanted devices has become very useful. Bio-implantable devices are electronic devices which are used for treatment and monitoring brain implants, pacemak...
In this paper, an inductive wireless link for motion recognition is investigated. In order to validate the feasibility of a wearable implementation, the use of three different materials is analyzed: a thin copper wire, a conductive yarn, and a conduc...
Wireless inductive-coupled power transfer is a very appealing technique for the battery recharge of autonomous devices like surveillance drones. The charger design mainly focuses on lightness and fast-charging to improve the drone mission times and r...
The leakage inductance of the transformer in a dual active bridge (DAB) dc–dc converter directly impacts the ac current waveforms and the power factor; thus, it can be considered a design requirement for the transformer. In the existing literat...
Wireless power transmission (WPT) is a critical technology that provides an alternative for wireless power and communication with implantable medical devices (IMDs). This article provides a study concentrating on popular WPT techniques for IMDs inclu...
In order to reduce the switching loss and cost, as well as improve the reliability of the induction motor (IM) drive system, the technology involving the three-phase current reconstruction of 60° discontinuous pulse width modulation (DPWM2) is st...
This paper presents a systematic methodology for the optimal design of wireless power transfer (WPT) systems. To design a WPT for a specific application, the values of coil geometric parameters and the number of resonators should be chosen such that...
The accelerating pace of research in neuroscience has created a considerable demand for neural interfacing microsystems capable of monitoring the activity of large groups of neurons. These emerging tools have revealed a tremendous potential for the a...
This paper presents an optimized 3-coil inductive wireless power transfer (WPT) system at 13.56 MHz and 40.68 MHz to show and compare the specific absorption rate (SAR) effects on human tissue. This work also substantiates the effects of perfect alig...
Implanted medical devices are very important electronic devices because of their usefulness in monitoring and diagnosis, safety and comfort for patients. Since 1950s, remarkable efforts have been undertaken for the development of bio-medical implante...
Multi-coil electromagnetic induction (EMI) systems induce magnetic fields below and above the subsurface. The resulting magnetic field is measured at multiple coils increasingly separated from the transmitter in a rigid boom. This field relates to th...
The robustness of the reference circuit in a wide range of supply voltages is crucial in implanted devices. Conventional reference circuits have demonstrated a weak performance over wide supply ranges. Channel-length modulation in the transistors cau...
This paper presents a fully integrated voltage-reference circuit for implantable devices such as retinal implants. The recently developed retinal prostheses require a stable supply voltage to drive a high-density stimulator array. Accordingly, a volt...
There is a growing interest to improve the quality of life of blind people. An implanted intracortical prosthesis could be the last resort in many cases of visual impairment. Technology at this moment is at a stage that implementation is at sight. Ma...
The papain-like cysteine protease 2 (PLP2) within the N-terminus of the porcine reproductive and respiratory syndrome virus (PRRSV) nsp2 replicase protein specifies a deubiquitinating enzyme (DUB), but its biochemical properties and the role in infec...
There is currently a growing interest in replacing the internal combustion engine with electric motors in transportation applications. However, there are different problems related to electric motors for this application. One of them is the oversizin...
Most studies of Wnt signaling in malignant tissues have focused on the canonical Wnt pathway (CWP) due to its role in stimulating cellular proliferation. The role of the non-canonical Wnt pathway (NCWP) in tissues with dysregulated Wnt signaling is n...
Neutral Point Clamped (NPC) converters with n levels are traditionally controlled in such a way that the DC-link capacitors operate at 1/(n − 1) of the total DC-link voltage level. The voltage level across the DC-link capacitors has to be prope...
Wireless power transfer using a magnetic field through inductive coupling is steadily entering the market in a broad range of applications. However, for certain applications, capacitive wireless power transfer using electric coupling might be prefera...
The human visual system is not a colorimeter. The perceived colour of a region does not only depend on its colour spectrum, but also on the colour spectra and geometric arrangement of neighbouring regions, a phenomenon called chromatic induction. Chr...
The DC-link filter which includes a magnetic inductor and a storage capacitor is one of the key parts of adjustable speed drives in the market. It significantly affects the stability, reliability, and power density of the motor-drive system. This pap...
The conventional PI control, which has been extensively employed in the high-performance control of linear induction motors, has the benefit of a straightforward concept, quick dynamic response, and simple control. Nevertheless, the linear induction...
of 29