Skip to Content

73 Results Found

  • Article
  • Open Access
25 Citations
4,245 Views
15 Pages

The Photocatalytical Properties of RGO/TiO2 Coated Fabrics

  • Magdalena Olak-Kucharczyk,
  • Grażyna Szczepańska,
  • Marcin H. Kudzin and
  • Marcin Pisarek

28 October 2020

The aim of this work was to immobilize reduced graphene oxide (RGO) and titanium dioxide (TiO2) on the surface of selected fibrous structures. Textile fabrics made of cotton (CO) and polyamide (PA) were used as a carrier. The following modification m...

  • Article
  • Open Access
18 Citations
5,206 Views
17 Pages

Physicochemical Studies on the Surface of Polyamide 6.6 Fabrics Functionalized by DBD Plasmas Operated at Atmospheric and Sub-Atmospheric Pressures

  • Larissa Nascimento,
  • Fernando Gasi,
  • Richard Landers,
  • Argemiro da Silva Sobrinho and ,
  • Eduardo Aragão,
  • Mariana Fraga,
  • Gilberto Petraconi,
  • William Chiappim and
  • Rodrigo Pessoa
  • + 4 authors+ 0 author

18 September 2020

This work proposes the use of a dielectric barrier discharge (DBD) reactor operating at atmospheric pressure (AP) using air and sub-atmospheric pressure (SAP) using air or argon to treat polyamide 6.6 (PA6.6) fabrics. Here, plasma dosages correspondi...

(This article belongs to the Special Issue Materials and Methods for New Technologies in Polymer Processing II)
  • Article
  • Open Access
31 Citations
4,618 Views
16 Pages

1 April 2020

This research is focused on obtaining antimicrobial hybrid materials consisting of poly(lactide) nonwoven fabrics and using phosphoro-organic compound—fosfomycin—as a coating and modifying agent. Polylactide (PLA) presents biodegradable p...

  • Article
  • Open Access
15 Citations
5,269 Views
15 Pages

Sustainable Dyeing and Functionalization of Different Fibers Using Orange Peel Extract’s Antioxidants

  • Aleksandra Ivanovska,
  • Ivana Savić Gajić,
  • Jelena Lađarević,
  • Marija Milošević and ,
  • Ivan Savić,
  • Katarina Mihajlovski and
  • Mirjana Kostić
  • + 2 authors+ 0 author

19 October 2022

A diluted ethanol orange peel extract was used for sustainable dyeing and functionalization of different fabrics. The extract analysis was performed using UPLC-ESI-MS/MS; its total flavonoid (0.67 g RE/100 g d.w.) and antioxidant (2.81 g GAE/100 g d....

(This article belongs to the Section Extraction and Industrial Applications of Antioxidants)
  • Article
  • Open Access
26 Citations
5,834 Views
15 Pages

30 September 2020

The chemical composition of rainwater can serve as an indicator of the excess of acidifying air pollutants. The pH value of rainwater in the presence of sulphur dioxide and nitrogen oxides, the precursors of acid rain, falls below pH 5.6, which is th...

(This article belongs to the Special Issue Functional Fibrous Materials and Smart Textile)
  • Article
  • Open Access
3 Citations
2,954 Views
11 Pages

Shock Thermal Resistance of Parachute Fabrics

  • Jiří Militký,
  • Jakub Wiener,
  • Dana Křemenáková and
  • Mohanapriya Venkataraman

18 April 2025

The use of polyester and polyamide fabrics for parachute constructions has a great advantage because, in comparison with classical silk-based parachutes, they are more durable and suitable for absorbing higher mechanical shocks. Because polyester and...

(This article belongs to the Special Issue Fibres and Textiles: Innovations, Engineering, and Sustainability—in Memory of Professor Izabella Krucińska (1953–2023))
  • Article
  • Open Access
1 Citations
1,303 Views
18 Pages

Evaluating the Potential of Enzymatically Synthesized Flavonoid Oligomers for Simultaneous Dyeing and Functionalization of Fabrics of Different Chemical Compositions

  • Ana Vukoičić,
  • Aleksandra Ivanovska,
  • Marija Ćorović,
  • Anja Petrov Ivanković and ,
  • Ana Milivojević and
  • Dejan Bezbradica
  • + 1 author+ 0 author

9 February 2026

This study explored, for the first time, the simultaneous dyeing and functionalization of textiles using enzymatically synthesized mixtures of phloridzin and esculin oligomers. Initial screening using multifiber fabric containing diacetate, cotton, p...

(This article belongs to the Special Issue Advances in Technical Textiles)
  • Article
  • Open Access
2 Citations
2,622 Views
27 Pages

Innovative Wound Healing Utilizing Bioactive Fabrics Functionalized with Tormentillae rhizoma Extract: An In Vivo Study on Wistar Albino Rats

  • Aleksandra Ivanovska,
  • Jovana Bradić,
  • Uroš Gašić,
  • Filip Nikolić and ,
  • Katarina Mihajlovski,
  • Vladimir Jakovljević and
  • Anica Petrović
  • + 2 authors+ 0 author

10 October 2025

This paper presents an innovative protocol for fabric functionalization using Tormentillae rhizoma extract, the chemical composition of which was proved via LC/MS analysis. The extract demonstrated antioxidant activity > 99%, and antibacterial eff...

(This article belongs to the Special Issue Advances of Medical Textiles: 2nd Edition)
  • Article
  • Open Access
2 Citations
1,038 Views
23 Pages

20 March 2026

In this study, the dyeing kinetics of polyamide fabrics with acid dyes, such as Telon Blue M2R, under both conventional and microwave-assisted heating conditions were comprehensively investigated. While the conventional dyeing reaction was completed...

(This article belongs to the Section Materials Processes)
  • Article
  • Open Access
3,079 Views
14 Pages

Influence of Molecular Weight of Anthraquinone Acid Dyes on Color Strength, Migration, and UV Protection of Polyamide 6 Fabrics

  • Nawshin Farzana,
  • Abu Naser Md Ahsanul Haque,
  • Shamima Akter Smriti,
  • Abu Sadat Muhammad Sayem and ,
  • Fahmida Siddiqa,
  • Md Azharul Islam,
  • Md Nasim and
  • S M Kamrul Hasan
  • + 3 authors+ 0 author

Anthraquinone acid dyes are widely used in dyeing polyamide due to their good exhaustion and brightness. While ionic interactions primarily govern dye–fiber bonding, the molecular weight (Mw) of these dyes can significantly influence migration,...

(This article belongs to the Section Surface Science)
  • Article
  • Open Access
59 Citations
8,405 Views
13 Pages

Ambulatory Evaluation of ECG Signals Obtained Using Washable Textile-Based Electrodes Made with Chemically Modified PEDOT:PSS

  • Amale Ankhili,
  • Xuyuan Tao,
  • Cédric Cochrane,
  • Vladan Koncar and ,
  • David Coulon and
  • Jean-Michel Tarlet
  • + 1 author+ 0 author

21 January 2019

A development of washable PEDOT:PSS (poly(3,4-ethylenedioxythiophene) polystyrene sulfonate) polyamide textile-based electrodes is an interesting alternative to the traditional Ag/AgCl disposable electrodes, usually used in clinical practice, helping...

(This article belongs to the Special Issue Smart Textiles and Wearable Sensors)
  • Article
  • Open Access
15 Citations
4,344 Views
19 Pages

2 February 2023

This study aims to elucidate the structure–property–process relationship of 3D printed polyamide and short carbon fibre-reinforced polyamide composites. The macroscopic properties (tensile modulus) of the 3D printed samples are quantitati...

(This article belongs to the Special Issue Additive Manufacturing of Polymer Composites)
  • Article
  • Open Access
11 Citations
3,584 Views
16 Pages

11 April 2022

Nowadays, reverse osmosis is the most widely utilized strategy in membrane technology due to its continuous improvement. Recent studies have highlighted the importance of the surface characteristics of support layers in thin-film membranes to improve...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
4 Citations
3,060 Views
11 Pages

On the Hot-Plate Welding of Reactively Compatibilized Acrylic-Based Composites/Polyamide (PA)-12

  • Henri Perrin,
  • Masoud Bodaghi,
  • Vincent Berthé,
  • Sébastien Klein and
  • Régis Vaudemont

10 January 2023

Joining of dissimilar thermoplastics and their composites is a challenge for thermal welding techniques due to different melting points. Reactive welding with an auxiliary functional material can offer the clear opportunities to develop joining proce...

(This article belongs to the Special Issue Fusion Bonding/Welding of Polymer Composites)
  • Article
  • Open Access
29 Citations
7,327 Views
14 Pages

Study on Surface Properties of Polyamide 66 Using Atmospheric Glow-Like Discharge Plasma Treatment

  • Mingyang Peng,
  • Lee Li,
  • Jiaming Xiong,
  • Kui Hua and ,
  • Shufan Wang and
  • Tao Shao
  • + 1 author+ 0 author

14 August 2017

Surface modification of fiber fabric sometimes needs a large volume of cold plasma to improve its efficiency. This experimental study is based on the treatment of polyamide 66 (PA66) fabrics using large contact-area glow-like plasma, which are produc...

(This article belongs to the Special Issue Fabric Coatings)
  • Article
  • Open Access
13 Citations
6,389 Views
13 Pages

Study of Melamine-Formaldehyde/Phase Change Material Microcapsules for the Preparation of Polymer Films by Extrusion

  • Sara García-Viñuales,
  • César Rubio,
  • Lidia Martínez-Izquierdo,
  • Beatriz Zornoza and ,
  • Elena Piera,
  • Miguel Ángel Caballero and
  • Carlos Téllez
  • + 2 authors+ 0 author

25 February 2022

n-Eicosane-melamine formaldehyde microcapsules of an average size of 1.1 μm and latent heat of fusion of 146.2 ± 5.3 J/g have been prepared. They have been characterized by scanning electron microscopy, FTIR spectroscopy, calorimetric techn...

(This article belongs to the Special Issue Innovative and Functional Polymer Membranes: Development and Applications)
  • Article
  • Open Access
18 Citations
3,494 Views
25 Pages

Novel Polyamide/Chitosan Nanofibers Containing Glucose Oxidase and Rosemary Extract: Fabrication and Antimicrobial Functionality

  • Ghazaleh Chizari Fard,
  • Mazeyar Parvinzadeh Gashti,
  • Seyed Ahmad Dehdast,
  • Mohammad Shabani and ,
  • Ehsan Zarinabadi,
  • Negin Seifi and
  • Ali Berenjian
  • + 2 authors+ 0 author

29 March 2024

In recent years, the synthesis of nanofibers using plant extracts and bioactive materials has been extensively studied and recognized as a suitable and efficient method applicable in the food packaging field. In this research, an antimicrobial materi...

(This article belongs to the Section Bioactive Coatings and Biointerfaces)
  • Article
  • Open Access
12 Citations
4,120 Views
20 Pages

Dielectric Characterization of Fabric Aggregates around the 2.45 GHz ISM Band under Various Humidity, Density, and Temperature Conditions

  • Rafael Pérez-Campos,
  • Juan Monzó-Cabrera,
  • José Fayos-Fernández,
  • Alejandro Díaz-Morcillo and ,
  • Antonio Martínez-González,
  • Antonio José Lozano-Guerrero,
  • Juan Luis Pedreño-Molina and
  • Jose Antonio García-Gambín
  • + 3 authors+ 0 author

16 June 2023

Fabric permittivity is critical for the manufacturing of wearable sensors and antennas as well as predicting how fabrics interact with electromagnetic fields. Engineers should also understand how permittivity changes under different temperatures, den...

(This article belongs to the Special Issue Green Textile Materials: Fibers, Processing and Applications)
  • Article
  • Open Access
30 Citations
5,800 Views
17 Pages

A Novel Approach to Optimize the Fabrication Conditions of Thin Film Composite RO Membranes Using Multi-Objective Genetic Algorithm II

  • Fekri Abdulraqeb Ahmed Ali,
  • Javed Alam,
  • Arun Kumar Shukla,
  • Mansour Alhoshan and ,
  • Basem M. A. Abdo and
  • Waheed A. Al-Masry
  • + 1 author+ 0 author

24 February 2020

This work focuses on developing a novel method to optimize the fabrication conditions of polyamide (PA) thin film composite (TFC) membranes using the multi-objective genetic algorithm II (MOGA-II) method. We used different fabrication conditions for...

  • Article
  • Open Access
5 Citations
4,733 Views
17 Pages

4 October 2024

Carbon nanomaterials are increasingly being integrated into modern research, particularly within the textile industry, to significantly boost performance and broaden application possibilities. This study investigates the impact of incorporating three...

  • Article
  • Open Access
25 Citations
5,386 Views
18 Pages

25 September 2020

The need for light-weight and high-strength insect-repellant fabrics is of critical importance to the cessation of viral diseases. The goal of the study is to investigate the structure and properties of insect-repellent polyamide fabrics for use in p...

(This article belongs to the Special Issue Advanced Textiles for Health and Safety, Environmental Protection Applications)
  • Article
  • Open Access
17 Citations
3,750 Views
16 Pages

Effect of Cu Modified Textile Structures on Antibacterial and Antiviral Protection

  • Małgorzata Cieślak,
  • Dorota Kowalczyk,
  • Małgorzata Krzyżowska,
  • Martyna Janicka and ,
  • Ewa Witczak and
  • Irena Kamińska
  • + 1 author+ 0 author

5 September 2022

Textile structures with various bioactive and functional properties are used in many areas of medicine, special clothing, interior textiles, technical goods, etc. We investigated the effect of two different textile woven structures made of 90% polyes...

(This article belongs to the Special Issue Bioactive and Functional Materials)
  • Article
  • Open Access
9 Citations
3,779 Views
20 Pages

Surface Area Evaluation of Electrically Conductive Polymer-Based Textiles

  • Lukas Vojtech,
  • Marek Neruda,
  • Tomas Reichl,
  • Karel Dusek and
  • Cristina De la Torre Megías

10 October 2018

In this paper, the surface area of coated polymer-based textiles, i.e., copper and nickel plated woven polyester fabric, copper and acrylic coated woven polyester fabric, and copper and acrylic coated non-woven polyamide fabric, is investigated. In o...

(This article belongs to the Special Issue Novel Smart Textiles)
  • Article
  • Open Access
43 Views
19 Pages

19 November 2026

Electrostatic charge accumulation in textiles can significantly affect both manufacturing processes and wear comfort, particularly in hosiery applications where cling phenomena are frequently observed. However, the combined influence of fabric compos...

  • Article
  • Open Access
11 Citations
2,637 Views
13 Pages

10 December 2024

A self-healing superhydrophobic coating was successfully prepared in the present work. The coating comprised PEG (polyethylene glycol) and Fe3O4 nanoparticles modified with stearic acid (SA) via hydrogen bonds, using polyamide resin and epoxy as bind...

(This article belongs to the Section Nanocomposite Materials)
  • Article
  • Open Access
18 Citations
2,914 Views
14 Pages

21 February 2024

Integrated safety sensors for personal protection equipment increasingly attract research activities as there is a high need for workers in delicate situations to be physically monitored in order to avoid accidents. In this work, we present a simple...

(This article belongs to the Section Wearables)
  • Article
  • Open Access
8 Citations
8,647 Views
17 Pages

A Robust Fabrication Method for Amphiphilic Janus Particles via Immobilization on Polycarbonate Microspheres

  • Karthik Ananth Mani,
  • Noga Yaakov,
  • Yafit Itzhaik Alkotzer,
  • Evgeni Zelikman and
  • Guy Mechrez

10 August 2018

Immobilizing particles on beads, fibers, or filaments, when only one side is exposed to the reaction medium and therefore can be selectively functionalized, is a scalable and easy to control strategy for the fabrication of amphiphilic Janus particles...

  • Article
  • Open Access
3 Citations
3,794 Views
31 Pages

Experimental Study on Sandwich Composites with Carbon Fiber Fabric Skin and 3D-Printed Carbon Fiber-Reinforced Polyamide Core

  • Sotiria Dimitrellou,
  • Isidoros Iakovidis,
  • Gerasimos Stratos and
  • Dimitrios-Nikolaos Pagonis

Material extrusion is a widely employed additive manufacturing technique with the functional capability of fabricating solid objects or cellular structures by depositing molten thermoplastic material in successive layers according to the designed pat...

  • Article
  • Open Access
1 Citations
609 Views
29 Pages

Carbon Fiber- vs. Glass Fiber-Reinforced PA12 Under Protic Ionic Liquid Lubrication: Friction, Wear and the Limits of Reinforcement in FFF-Printed Composites

  • Horea Stefan Goia,
  • Florin Popister,
  • Corina Birleanu,
  • Razvan Udroiu and ,
  • Friedemann Schaber and
  • Marius Pustan
  • + 1 author+ 0 author

14 September 2026

Fused filament fabrication (FFF) is increasingly employed for functional components subjected to sliding contact, for which friction and wear determine service life as decisively as static strength. Tribological characterization of fiber-reinforced p...

(This article belongs to the Special Issue Sustainable and High-Performance Fiber Reinforced Polymer Composites for Engineering Applications)
  • Article
  • Open Access
5 Citations
2,246 Views
11 Pages

5 November 2024

This study presents a new approach to developing protective material structures for personal protective equipment (PPE), and in particular for protective gloves, with the use of ultrasonic and contact welding processes. The goal was to assess the qua...

(This article belongs to the Special Issue Structural Design and Mechanical Properties of Fiber Composites (Second Edition))
  • Article
  • Open Access
29 Citations
10,956 Views
14 Pages

Flexible Molybdenum Electrodes towards Designing Affinity Based Protein Biosensors

  • Vikramshankar Kamakoti,
  • Anjan Panneer Selvam,
  • Nandhinee Radha Shanmugam,
  • Sriram Muthukumar and
  • Shalini Prasad

18 July 2016

Molybdenum electrode based flexible biosensor on porous polyamide substrates has been fabricated and tested for its functionality as a protein affinity based biosensor. The biosensor performance was evaluated using a key cardiac biomarker; cardiac Tr...

(This article belongs to the Special Issue Screen-Printed Electrodes and Sensors)
  • Review
  • Open Access
187 Citations
25,963 Views
53 Pages

2 July 2018

Electrospinning, for the last few decades, has been extensively acknowledged for its ability to manufacture a macro/nanofibrous architecture from biopolymers, which is otherwise difficult to obtain, in a cost effective and user-friendly technique. Su...

  • Article
  • Open Access
24 Citations
5,292 Views
18 Pages

The silver-zinc oxide (Ag-ZnO) polyamide thin film composite (PA-TFC) membrane was prepared by interfacial polymerization. The Ag-ZnO/PA-TFC membrane was characterized by attenuated total reflectance fourier-transform infrared spectroscopy (ATR-FTIR)...

(This article belongs to the Section Polymeric Membranes)
  • Article
  • Open Access
29 Citations
9,558 Views
13 Pages

19 October 2017

In this study, polyimide (PI)/Ag nanowire (AgNW) nanocomposite aerogels with extremely high mechanical performance have been fabricated utilizing amine-modified AgNWs as mechanical nanoreinforcement particulates and crosslinking agents. Initially, Ag...

(This article belongs to the Special Issue Polymer Nanocomposites)
  • Article
  • Open Access
4 Citations
4,033 Views
18 Pages

Star-Branched Polyamides as the Matrix in Thermoplastic Composites

  • Karina C. Núñez Carrero,
  • Manuel Herrero,
  • María Asensio,
  • Julia Guerrero and ,
  • Juan Carlos Merino and
  • José María Pastor
  • + 1 author+ 0 author

26 February 2022

The aim of this study is the preparation of star-shaped branched polyamides (sPA6) with low melt viscosity, but also with improved mechanical properties by reactive extrusion. This configuration has been obtained by grafting a tri-functional, three-a...

(This article belongs to the Special Issue Development in Fiber-Reinforced Polymer Composites)
  • Review
  • Open Access
11 Citations
6,527 Views
28 Pages

21 September 2024

Optimizing the structure of the polyamide (PA) layer to improve the separation performance of PA thin-film composite (TFC) membranes has always been a hot topic in the field of membrane preparation. As novel crystalline materials with high porosity,...

(This article belongs to the Section Membrane Fabrication and Characterization)
  • Article
  • Open Access
59 Citations
6,808 Views
14 Pages

Process-Induced Fiber Orientation in Fused Filament Fabrication

  • Tom Mulholland,
  • Sebastian Goris,
  • Jake Boxleitner,
  • Tim A. Osswald and
  • Natalie Rudolph

As the applications for additive manufacturing have continued to grow, so too has the range of available materials, with more functional or better performing materials constantly under development. This work characterizes a copper-filled polyamide 6...

(This article belongs to the Special Issue Discontinuous Fiber Composites)
  • Article
  • Open Access
1,361 Views
21 Pages

Influence of the Ozonation Process on Expanded Graphite for Textile Gas Sensors

  • Paulina Rzeźniczak,
  • Ewa Skrzetuska,
  • Mohanapriya Venkataraman and
  • Jakub Wiener

27 August 2025

In view of the growing demand for flexible, conductive and functional materials for textile gas sensor applications, the effects of ozonation on the properties of expanded graphite (EG) in textile structures were analyzed. Four types of fabrics (cott...

(This article belongs to the Special Issue Feature Papers in Physical Sensors 2025)
  • Article
  • Open Access
34 Citations
7,004 Views
11 Pages

Preparation and Properties of Carbon Fiber/Carbon Nanotube Wet-Laid Composites

  • Suhyun Lee,
  • Kwangduk Ko,
  • Jiho Youk,
  • Daeyoung Lim and
  • Wonyoung Jeong

30 September 2019

In this study, carbon nanotubes (CNTs) were introduced into carbon fiber (CF) wet-laid composites as functional nano-fillers to fabricate multi-functional composites with improved mechanical, electrical, and thermal properties. It was considered that...

(This article belongs to the Special Issue Innovative Functional Textiles)
  • Article
  • Open Access
23 Citations
5,055 Views
18 Pages

Preparation of Thin-Film Composite Nanofiltration Membranes Doped with N- and Cl-Functionalized Graphene Oxide for Water Desalination

  • Francisco J. García-Picazo,
  • Sergio Pérez-Sicairos,
  • Gustavo A. Fimbres-Weihs,
  • Shui W. Lin and ,
  • Moisés I. Salazar-Gastélum and
  • Balter Trujillo-Navarrete
  • + 1 author+ 0 author

18 May 2021

In the present work, chemically modified graphene oxide (GO) was incorporated as a crosslinking agent into thin-film composite (TFC) nanofiltration (NF) membranes for water desalination applications, which were prepared by the interfacial polymerizat...

(This article belongs to the Special Issue Polymer-Based Membrane Technology and Applications II)
  • Article
  • Open Access
2 Citations
846 Views
24 Pages

Eco-Friendly Functionalization of Recycled Cotton-Pulp Wet-Laid Nonwovens: Influence on Water Repellency and Mechanical Performance

  • Marta A. Teixeira,
  • Beatriz Magalhães,
  • Juliana C. Dias,
  • Cláudia Amorim and ,
  • Raquel Bértolo,
  • Paula Pinto,
  • Carla J. Silva and
  • Lúcia Rodrigues
  • + 3 authors+ 0 author

Functionalized wet-laid nonwovens were developed from recycled cotton fibres, including spinning process residues (SPRs) and cotton fabric scraps (CFSs), blended with refined bleached eucalyptus kraft pulp (BEKP), demonstrating the valorisation of te...

(This article belongs to the Special Issue Textile Recycling and Sustainability)
  • Article
  • Open Access
11 Citations
4,007 Views
23 Pages

10 May 2021

Besides the design freedom offered by additive manufacturing, another asset lies within its potential to accelerate product development processes by rapid fabrication of functional prototypes. The premise to fully exploit this benefit for lightweight...

(This article belongs to the Special Issue Experimental Testing and Numerical Simulation of Polymer-Based Additive Manufacturing Parts)
  • Article
  • Open Access
1 Citations
2,457 Views
22 Pages

9 June 2023

Demand for the development of the convergence industry, research studies on heat transfer, thermal characteristics, semiconductors, motors, and batteries using special materials have come to the fore. Meanwhile, molybdenum (Mo) exhibits relatively sm...

  • Article
  • Open Access
32 Citations
5,426 Views
15 Pages

Effect of Dispersion Solvent on the Deposition of PVP-Silver Nanoparticles onto DBD Plasma-Treated Polyamide 6,6 Fabric and Its Antimicrobial Efficiency

  • Ana I. Ribeiro,
  • Martina Modic,
  • Uros Cvelbar,
  • Gheorghe Dinescu and ,
  • Bogdana Mitu,
  • Anton Nikiforov,
  • Christophe Leys,
  • Iryna Kuchakova,
  • Mike De Vrieze and
  • Andrea Zille
  • + 7 authors+ 2 authors

26 March 2020

Polyvinylpyrrolidone-coated silver nanoparticles (PVP-AgNPs) dispersed in ethanol, water and water/alginate were used to functionalize untreated and dielectric barrier discharge (DBD) plasma-treated polyamide 6,6 fabric (PA66). The PVP-AgNPs dispersi...

(This article belongs to the Section Biology and Medicines)
  • Article
  • Open Access
19 Citations
4,922 Views
15 Pages

Creating a Functional Biomimetic Cartilage Implant Using Hydrogels Based on Methacrylated Chondroitin Sulfate and Hyaluronic Acid

  • Gerke H. Schuiringa,
  • Marko Mihajlovic,
  • Corrinus C. van Donkelaar,
  • Tina Vermonden and
  • Keita Ito

21 July 2022

The load-bearing function of articular cartilage tissue contrasts with the poor load-bearing capacity of most soft hydrogels used for its regeneration. The present study explores whether a hydrogel based on the methacrylated natural polymers chondroi...

(This article belongs to the Special Issue Polysaccharide Gels and Beyond: From the Synthesis to Application)
  • Feature Paper
  • Article
  • Open Access
741 Views
18 Pages

17 April 2026

This work explores a sustainable route for producing recycled AlNiCo-based magnetic composites by incorporating end-of-life AlNiCo-5 particles into a polyamide 12 (PA12) matrix, thereby eliminating conventional debinding requirements. The study empha...

(This article belongs to the Section Materials Processes)
  • Article
  • Open Access
14 Citations
4,868 Views
15 Pages

Digital Sublimation Printing on Knitted Polyamide 6.6 Fabric Treated with Non-Thermal Plasma

  • Marcia Cristina Silva,
  • Gilberto Petraconi,
  • Ricardo Rodrigues Ramos Cecci,
  • Adriano Alves Passos and ,
  • Wanderson Ferraz do Valle,
  • Bruno Braite,
  • Sérgio Ricardo Lourenço and
  • Fernando Gasi
  • + 3 authors+ 0 author

15 June 2021

The garment industry demands stamping processes that are increasingly more agile and less damaging to the environment. In this scenario, digital printing, with the sublimation transfer printing technique, presents itself as a viable option for synthe...

(This article belongs to the Special Issue Advances in Plasma Processes for Polymers)
  • Review
  • Open Access
154 Citations
25,798 Views
54 Pages

Bio-Based Sustainable Polymers and Materials: From Processing to Biodegradation

  • Obinna Okolie,
  • Anuj Kumar,
  • Christine Edwards,
  • Linda A. Lawton and ,
  • Adekunle Oke,
  • Seonaidh McDonald,
  • Vijay Kumar Thakur and
  • James Njuguna
  • + 3 authors+ 0 author

In the life cycle of a material, there will be either chemical or physical change due to varying environmental factors such as biological activity, light, heat, moisture, and chemical conditions. This process leads to polymer property change as perta...

(This article belongs to the Special Issue Sustainable Biocomposites)
  • Article
  • Open Access
12 Citations
3,348 Views
22 Pages

23 February 2024

Polymer powder bed fusion (PBF) is becoming increasingly popular for the fabrication of lightweight, high-performance parts, particularly for medical and aerospace applications. This study investigates the effect of powder re-use and material aging o...

(This article belongs to the Special Issue Polymeric Materials and Their Application in 3D Printing)
  • Article
  • Open Access
12 Citations
1,555 Views
19 Pages

24 November 2025

Selective Laser Sintering (SLS) is an Additive Manufacturing (AM) technology that is receiving considerable attention in the scientific and industrial communities due to its great ability to efficiently produce functional and complex parts. The prese...

(This article belongs to the Special Issue Polymer Materials for Application in Additive Manufacturing, 2nd Edition)

of 2