Room-temperature ionic liquids (RTILs) have attracted attention in engineering electrolytes for electrochemical energy conversion and storage devices. Within the present study, five different RTILs were prepared and subsequently investigated as addit...
18 November 2024
In recent decades, the chemistry of transition metal coordination compounds has undergone continuous development at both scientific and application levels. The diversity of metal(II) complexes, along with their structural features and physicochemical...
Crystals of LiCs2[N(CN)2]3 were obtained from the reaction of stoichiometric amounts of aqueous solutions of LiCl and CsBr with Ag[N(CN)2]. X-ray single-crystal structure analysis showed that LiCs2[N(CN)2]3 crystallizes isotypically to NaCs2[N(CN)2]3...
A series of cobalt(II) dicyanamide (dca−) coordination polymers with substituted pyrazines (pyz) and pyrimidines (pym) as auxiliary ligands have been synthesized and structurally characterized to investigate the influence of the type and substi...
A novel 36-metallacrown-6 complex [CuL(N(CN)2)(PF6)]6∙0.5H2O 1 was achieved using a tridendate ligand, 1,4,7-triisopropyl-1,4,7-triazacyclononane (L), and a flexible ligand, dicyanamide in MeOH. The μ1,5 bridging models of the dicyanamide ligand l...
Crystals of Hg2[N(CN)2]2 were grown by a slow diffusion-reaction between aqueous Hg2(NO3)2·2H2O and Na[N(CN)2]. Hg2[N(CN)2]2 adopts the triclinic space group P 1 ¯ (no. 2) with a = 3.7089(5), b = 6.4098(6), c = 8.150(6) Å, &a...
A novel hybrid structure of bimetallic dicyanamide decorated BiVO4 is developed via a simple method to accelerate interfacial water oxidation kinetics. Two types of bimetallic dicyanamides, CoNi(dca)2 and CoFe(dca)2, are coated on BiVO4 photoanodes a...
In Solid-State Chemistry, a well-known route to obtain new compounds and modulate their properties is the formation of solid solutions, a strategy widely exploited in the case of classical inorganic perovskites but relatively unexplored among emergen...
This study focuses on the synthesis, characterization, and application of four ionic liquids (ILs), three of which are being reported for the first time, with unique thermal properties and diverse anion-cation combinations, specifically in the contex...
This work aims to elucidate the role of environmental humidity on the tribological behavior of steel surfaces lubricated with an ionic liquid comprised of a fluorinated phosphonium cation—tributyl-3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluoro-octyl-phospho...
The infrared absorbance spectrum of the ionic liquid 1-butyl-1-methylpyrrolidinium dicyanamide, mixed with water at two different concentrations, was measured between 160 and 300 K in the mid infrared range. Both mixtures do not crystallize on coolin...
Fe[C5H5N]2[N(CN)2]2 (1) was synthesized from a reaction of stoichiometric amounts of NaN(CN)2 and FeCl2·4H2O in a methanol/pyridine solution. Single-crystal and powder diffraction show that 1 crystallizes in the monoclinic space group I2/m (no....
The synthesis and structural characterization of six dicyanamido-cadmium(II) complexes are reported: catena-[Cd(μ1,3-dca)(μ1,5-dca)(3-ampy)] (1), catena-[Cd3(μ1,3,5-dca)2(μ1,5-dca)4(pyNO)2(H2O)2] (2), catena-{Cd(H2O)2(μ1,5-dca)2](2,6-lut-NO)} (3), ca...
The negative environmental and industrial impacts of the presence of sulfur compounds such as benzothiophene in fuels have led to a greater interest in desulfurization research. In this work, carbon from palm waste sources was modified with trihexYl(...
A novel series of mononuclear five-coordinated pseudohalido-Cu(II) complexes displaying distorted square bipyramidal: [Cu(L1)(NCS)2] (1), [Cu(L2)(NCS)2] (2) and [Cu(L3)(NCS)]ClO4 (5) as well as distorted trigonal bipyramidal: [Cu(isp3tren)(N3)]ClO4 (...
Six pseudohalide zinc(II) containing a variety of N-donor auxiliary amines were structurally characterized. These include two mononuclear trigonal bipyramidal [Zn(NTB)(N3)]ClO4·½H2O (3) and [Zn(TPA)(NCS)]ClO4 (4), two distorted octahedral [Zn(1,8-dam...
Three coordination polymers of metal(II)-dicyanamido (dca) complexes with 4-methoxypyridine-N-oxide (4-MOP-NO); namely, catena-[Co(µ1,5-dca)2(4-MOP-NO)2] (1), catena-[Mn(µ1,5-dca)2(4-MOP-NO)2] (2), catena-[Cd(µ1,5-dca)2(4-MOP-NO)2]...
Water is an essential natural resource, and its contamination is an important issue at present. This study aimed to increase the techniques that can be used to clean and reuse industrial wastewater by studying the feasibility of an aqueous two-phase...
A one-dimensional coordination polymer was synthesized employing hepta-coordinate CoII as nodes and dicyanamide as linkers. Detailed direct current (DC) and alternating current (AC) magnetic susceptibility measurements reveal the presence of field-in...
Task Specific Ionic Liquids (ILs) were generated by association between a cationic ester derivative of betaine and coordinating inorganic anions such as dicyanamide (Dca−), chlorosalycilate (ClSal) and saccharinate (sac). Extraction of Cu(II),...
Carbohydrate moieties were combined with various cross-linkable anions (thiocyanate [SCN], tetracyanoborate [TCB], tricyanomethanide [TCM], and dicyanamide [DCA]) and investigated as precursors for the synthesis of nitrogen-doped and nitrogen-/sulfur...
In this work, a supported ionic liquid membrane (SILM) was prepared by impregnating a PVDF membrane with 1-butyl-3-methylimidazolium dicyanamide ([BMIM][DCA]) ionic liquid. This membrane was tested for its permeability to pure gases (CO2, N2 and O2)...
The paper presents the preparation of new ionic liquids based on hexamethylenetetramine with bis(trifluoromethanesulfonyl)imide and dicyanamide anion, which were characterized in detail in terms of their purity (Ion Chromatography) and thermal proper...
Lignin and other colored structures need to be bleached after the Kraft process in the pulp industry. Development of environmentally-safe bleaching catalysts or electrocatalysts constitutes an attractive strategy for selective removal of lignin. Seve...
Two key features—non-volatility and non-flammability—make ionic liquids (ILs) very attractive for use as electrolyte solvents in advanced energy storage systems, such as supercapacitors and Li-ion batteries. Since most ILs possess high vi...
Catalysis is the most efficient and economical method for treating volatile organic pollutants (VOCs). Among the many materials that are used in engineering, platinized carbon nitride (Pt/g-C3N4) is an efficient and multifunctional catalyst which has...
Using N2O4 donor symmetric ligand H2L and dca co-ligand, two new isostructural dinuclear CuII–LnIII complexes [Cu(Cl)(L)Ln(NO3)(CH3OH)(H2O)(dca)] [Ln=Ho (1CuHo), Gd (2CuGd)] [H2L = 6,6′-((1E,1′E)-(ethane-1,2-diylbis(azaneylylidene))...
Ionic liquids (ILs) are being widely studied due to their unique properties, which make them potential candidates for conventional solvents. To study whether binary mixtures of pure ionic liquids provide a viable alternative to pure ionic liquids for...
The control of lubricity induced by electric potential is appealing for numerous applications. On the other hand, the high polarity of ionic liquids facilitates the adsorption of equally charged molecules onto polar surfaces. This phenomenon and its...
Good dispersion of carbon nanotubes (CNTs) together with effective curing were obtained in epoxy/CNT nanocomposites (NCs) using three different ionic liquids (ILs). Compared to conventional amine-cured epoxy systems, lower electrical percolation thre...
Cyclohexene is an important intermediate product for a highly efficient and greener formation of major end products like adipic acid, nylon 6, and nylon 6.6. By using a complex tetra-phase system (g/l/l/s) including hydrogen (g), water (l), an organi...
New coordination compounds of copper(II) with 2,5-bis(ethylthio)-1,3,4-thiadiazole (L1) and 2,5-bis(pyridylmethylthio)-1,3,4-thiadiazole (L2) with compositions Cu(L1)2Br2, Cu(L1)(C2N3)2, Cu(L2)Cl2, and Cu(L2)Br2 were prepared. The complexes were iden...
In recent years, ionic liquids (ILs) have served as potential solvents to dissolve organic, inorganic, and polymer materials. A copolymer (for example, Pluronic) can undergo self-organization by forming a micelle-like structure in pure IL medium, and...
For over two decades, ionic liquids have been among the most exciting lubrication topics. Ionic liquids were investigated by using them as neat lubricants and lubricity-enhancing additives. However, new and unique features were revealed by introducin...
Oxygen and nitrogen capacitively coupled plasma (CCP) was used to irradiate mixtures of aliphatic acids in high boiling point solvents to synthesize fluorescent carbon dots (C-dots). With a high fluorescence intensity, the C-dots obtained from the O2...
Quaternary phosphonium salts are popular candidates used in many chemical transformations and synthetic chemistry, notably in catalysis. We have examined the single crystals of two bulky phosphonium compounds, tetra([1,1′-biphenyl]-4-yl) phosph...
4-chlorophenol (4-CP), a hydroxylated aromatic compound (HAC), is a recalcitrant and toxic organic pollutant found in industrial wastewater and various environmental media. In this paper, visible-light-activated photocatalysis using graphitic carbon...
Bacterial cellulose (BC) is a highly pure and crystalline cellulose produced via bacterial fermentation. However, due to its chemical structure made of strong hydrogen bonds and its high molecular weight, BC can neither be melted nor dissolved by com...
Gold as a precious metal resource has high recycling significance. However, the current extraction methods cannot achieve the both efficiency and environmental friendliness. In this paper, we propose a new gold leaching agent, which can leach gold un...
The conventional hydrodenitrogenation method is expensive and involves the use of catalysts and harsh procedures. In the last few years, ionic liquids (ILs) have gained attention as a promising alternative solvent for fuel oil extractive denitrogenat...
Although the most promising applications of ionogels require their contact with aqueous media, few data are available on the stability of ionogels upon exposure to water. In this paper, a simple, easy-to-setup and precise method is presented, which w...
This work reports on novel acid–base conjugate pairs of monocationic allyldiamidinium and dicationic diamidinium salts, some of which are ionic liquids (ILs) at ambient temperatures. A series of allyldiamidinium salts of the general formula [C3...
Composites of montmorillonite K10 (MMT K10) and ionic liquid (IL) containing a 1-butyl-3-methyl-imidazolium cation ([BMIm]+) and various anions, such as bis (trifluoromethylsulfonyl) imide ([NTf2]−), trifluoromethanesulfonate ([OTf]−), an...
Polyethyleneimine (PEI) cryogels with interconnected superporous morphology were synthesized via the cryopolymerization technique. Then, conductive polymers, poly(Aniline) (PANi), poly(Pyrrole) (PPy), and poly(Thiophene) (PTh) were prepared within th...
Ionic liquids have unique characteristics, which render them ideal candidates as new base oils or additives. In particular, there are great expectations from the combination of diamond-like carbon and cyano-based ionic liquids. Lubricating properties...
Olefin/paraffin separation is an important technological process. A promising alternative to conventional energy-consuming methods is employment of gas-liquid membrane contactors. In the present work, the membranes used were polysulfone (PSf) asymmet...
Inhalational anesthesia is supplied through an assisted ventilation system. It is mostly composed of xenon or nitrous oxide, halogenated hydrocarbons (HHCs), and oxygen. In order to reduce costs of the anesthesia compounds, the remaining anesthetics...
A series of salts based on ethyl ester glycine-betaine derivatives, viz tri(n-pentyl)[2-ethoxy-2-oxoethyl]ammonium bromide, have been synthesized. These cations generate hydrophobic ionic liquids (ILs) with bis(trifluoromethylsulfonyl)imide (Tf2N&min...