Skip to Content

404 Results Found

  • Article
  • Open Access
7 Citations
6,035 Views
14 Pages

9 April 2020

Through the analysis of the recovery inrush current generated by the external fault removal of the converter transformer, it is pointed out that the zero-sequence current caused by the recovery inrush may result in the saturation of the neutral curre...

(This article belongs to the Section F: Electrical Engineering)
  • Article
  • Open Access
4 Citations
4,691 Views
9 Pages

27 November 2020

In this study, we performed an electromagnetic characteristic analysis of a permanent magnet synchronous machine considering the current waveform based on static rotor eccentricity. First, the characteristics of the back electromotive force were anal...

(This article belongs to the Special Issue Modeling, Design and Control of Electric Machines)
  • Article
  • Open Access
2 Citations
1,649 Views
23 Pages

18 January 2024

The objective of the investigation was to increase the effectiveness of damage detection in the stator of the squirrel-cage induction machine. The analysis aimed to enhance the operational trustworthiness of the squirrel-cage induction machine by emp...

(This article belongs to the Special Issue New Principles, Opportunities and Challenges in Power Quality of Renewable Energy Systems)
  • Article
  • Open Access
9 Citations
3,792 Views
13 Pages

Fault Arc Detection Method Based on Improved ShuffleNet V2 Network

  • Yuehua Huang,
  • Yun Lu,
  • Liping Fan,
  • Kun Xiang and
  • Hui Ma

6 January 2025

Fault arcs exhibit randomness, with current waveforms closely mirroring those of standard nonlinear load operations, posing challenges for traditional series fault arc detection methods. This study presents an improved detection approach using a ligh...

(This article belongs to the Section Automation Control Systems)
  • Article
  • Open Access
6 Citations
4,380 Views
14 Pages

31 May 2021

Barrier machines are a key component of automatic level crossing systems ensuring safety on railroad crossings. Their failure results not only in delayed railway transportation, but also puts human life at risk. To prevent faults in this critical saf...

(This article belongs to the Special Issue Novel Approaches to Electrical Machine Fault Diagnosis)
  • Article
  • Open Access
5 Citations
3,961 Views
16 Pages

A Hybrid Hilbert-Huang Method for Monitoring Distorted Time-Varying Waveforms

  • Radu Plamanescu,
  • Ana-Maria Dumitrescu,
  • Mihaela Albu and
  • Siddharth Suryanarayanan

27 March 2021

The electric power systems together with the entire energy sector are rapidly evolving towards a low-carbon, secure, and competitive economy facing revolutionary transformations from technical structure to economic value chain. Pathways to achieve su...

(This article belongs to the Special Issue Verifying the Targets—Selected Papers from the 55th International Universities Power Engineering Conference (UPEC 2020))
  • Article
  • Open Access
558 Views
19 Pages

11 August 2026

Arc faults in low-voltage smart-farm distribution systems are difficult to detect reliably because normal current waveforms vary with load composition and operating conditions. This paper presents a progressive three-stage time–frequency learni...

(This article belongs to the Section Fault Diagnosis & Sensors)
  • Feature Paper
  • Article
  • Open Access
3 Citations
4,339 Views
15 Pages

The Cascade of High-Voltage Pulsed Current Sources

  • Weigang Dong,
  • Lei Chen,
  • Jian Qiu,
  • Haozheng Shi and ,
  • Hui Zhao and
  • Kefu Liu
  • + 1 author+ 0 author

28 February 2024

Currently, pulsed adders are used as pulsed voltage sources maturely. However, their use as pulsed current sources is significantly limited due to circuit impedance and the characteristics of power devices. This paper presents a simple yet effective...

(This article belongs to the Special Issue Advances in Pulsed-Power and High-Power Electronics)
  • Article
  • Open Access
2 Citations
1,739 Views
14 Pages

The On-Line Identification and Location of Welding Interference Based on CEEMD

  • Peng Yu,
  • Haichao Song,
  • Yukuo Tian,
  • Juan Dong and ,
  • Guocheng Xu,
  • Mingming Zhao and
  • Xiaopeng Gu
  • + 2 authors+ 0 author

28 March 2024

The welding process itself is a non-linear, multivariable, coupled physical metallurgical process that is easily perturbed. Improper welding parameter selection and welding process conditions will interfere with the welding process and affect the fin...

(This article belongs to the Topic Advanced Processes in Metallurgical Technologies)
  • Article
  • Open Access
6 Citations
3,837 Views
19 Pages

The Impact of Zero-Mode Inrush Current of T-Hin on Zero-Sequence Overcurrent Protection and an Improved Protection with the Second Harmonic Restraint

  • Wenbin Cao,
  • Xianggen Yin,
  • Yongxin Chen,
  • Yuanlin Pan and ,
  • Xiangyuan Yin and
  • Yuxue Wang
  • + 1 author+ 0 author

29 July 2019

In recent years, the zero-mode inrush current of high-impedance transformer with built-in high-voltage winding (T-Hin), which has large amplitude and decays slowly, causes the misoperation of zero-sequence overcurrent protection. Compared with magnet...

(This article belongs to the Special Issue Advanced Techniques for Electronic Power and Energy Systems)
  • Article
  • Open Access
2 Citations
2,659 Views
18 Pages

Non-Parametric Statistical Analysis of Current Waveforms through Power System Sensors

  • Aaron J. Wilson,
  • Bruce R. J. Warmack,
  • Ali Riza Ekti and
  • Yilu Liu

15 November 2022

The protection, control, and monitoring of the power grid is not possible without accurate measurement devices. As the percentage of renewable energy sources penetrating the existing grid infrastructure increases, so do uncertainties surrounding thei...

(This article belongs to the Topic Condition Monitoring and Diagnostic Methods for Power Equipment in New Energy Power Systems)
  • Article
  • Open Access
6 Citations
4,428 Views
13 Pages

Delayed Discharge Bridging Two Sputtering Modes from Modulated Pulsed Power Magnetron Sputtering (MPPMS) to Deep Oscillation Magnetron Sputtering (DOMS)

  • Masaomi Sanekata,
  • Hiroshi Nishida,
  • Tatsuya Watabe,
  • Yuki Nakagomi and ,
  • Yoshihiro Hirai,
  • Nobuo Nishimiya,
  • Masahide Tona,
  • Hiroaki Yamamoto,
  • Naoyuki Hirata and
  • Kiyokazu Fuke
  • + 8 authors+ 3 authors

21 April 2021

Delayed discharges due to electrical breakdown are observed in modulated pulsed pow er magnetron sputtering (MPPMS) plasma of titanium. The delayed discharge, which is remarkable with decreasing argon gas pressure, transforms the discharge current wa...

(This article belongs to the Special Issue Feature Papers in Plasma Sciences)
  • Article
  • Open Access
3 Citations
4,330 Views
18 Pages

2 February 2023

This paper is an investigation into the high inrush current effect that emerges during the energizing of drivers of different circuit types loaded by light-emitting-diode (LED) strips. Two different driver circuit types were analyzed—a voltage...

(This article belongs to the Section F: Electrical Engineering)
  • Article
  • Open Access
4 Citations
3,046 Views
16 Pages

Non-Intrusive Arc Fault Detection and Localization Method Based on the Mann–Kendall Test and Current Decomposition

  • Wenqian Jiang,
  • Bo Liu,
  • Zhou Yang,
  • Hanju Cai and ,
  • Xiuqing Lin and
  • Da Xu
  • + 1 author+ 0 author

9 May 2023

In recent years, electrical fires caused by arc faults have been increasing, seriously affecting the safety of people’s lives and property. Considering the complex arc fault characteristics of actual low-voltage users, the non-intrusive arc fau...

(This article belongs to the Special Issue Current Research and Future Development in Intelligent Power Distribution Systems: Planning, Operation and Control)
  • Article
  • Open Access
18 Citations
4,246 Views
26 Pages

Phase Shift APOD and POD Control Technique in Multi-Level Inverters to Mitigate Total Harmonic Distortion

  • Kalsoom Bano,
  • Ghulam Abbas,
  • Mohammed Hatatah,
  • Ezzeddine Touti and ,
  • Ahmed Emara and
  • Paolo Mercorelli
  • + 1 author+ 0 author

23 February 2024

Multi-level inverters are widely employed to generate new energy because of their huge capacity and benefits in sound control performance. One of the critical areas of study for multi-level inverters is control strategy research. In this study, the c...

(This article belongs to the Special Issue Modeling, Simulation, and Analysis of Electrical Power Systems)
  • Article
  • Open Access
198 Views
19 Pages

Analysis of Inductor Model Sufficiency in High-Frequency Power Electronics

  • Maciej Chojowski,
  • Robert Sosnowski and
  • Marcin Baszyński

14 October 2026

This paper presents a comprehensive analysis and optimization framework for power inductor models used in power electronics applications. A methodology is proposed to identify inductor models with the minimum number of elements sufficient to accurate...

(This article belongs to the Section F3: Power Electronics)
  • Article
  • Open Access
6 Citations
3,350 Views
13 Pages

Research on Electromagnetic Susceptibility of Electronic Modules in Component-Level HEMP PCI Test

  • Chuanbao Du,
  • Dewei Xia,
  • Quan Huang,
  • Congguang Mao and ,
  • Zhitong Cui,
  • Wenxiao Fang and
  • Xin Nie
  • + 2 authors+ 0 author

15 February 2022

The study of electromagnetic sensitivity of electronic modules is crucial for the selection of a component-level pulse current injection (PCI) waveform, which will determine whether a component-level PCI test is equivalent to a system-level pulse ill...

(This article belongs to the Special Issue Electromagnetic Transients in Large-Scale Renewable Energy System: Model, Method, Simulation, Measurement and Suppressing Techniques)
  • Article
  • Open Access
541 Views
26 Pages

4 August 2026

A fault-section location method based on waveform-difference analysis of transient zero-sequence currents is proposed for distribution networks with small-current grounding systems. The method addresses weak single-phase-to-ground fault-current ampli...

  • Article
  • Open Access
6 Citations
2,984 Views
12 Pages

Estimation Accuracy of the Electric Field in Cable Insulation Based on Space Charge Measurement

  • Norikazu Fuse,
  • Shosuke Morita,
  • Satoru Miyazaki,
  • Toshihiro Takahashi and
  • Naohiro Hozumi

5 July 2022

Space charge measurement accuracy is crucial when assessing the suitability of cables for high-voltage direct current (DC) systems. This study assembled state-of-the-art analysis technologies, including time-domain deconvolution, to mark electric fie...

(This article belongs to the Section F: Electrical Engineering)
  • Article
  • Open Access
672 Views
27 Pages

Waveform-Level EMT Analysis of Overhead–Cable Transition Effects in Hybrid Transmission Corridors

  • Luis Salazar Fonseca,
  • Josua Oña Aráuz,
  • José Oscullo Lala,
  • Nathaly Orozco Garzón and ,
  • Henry Carvajal Mora,
  • José Vega-Sánchez and
  • Takaaki Ohishi
  • + 2 authors+ 0 author

10 June 2026

Hybrid transmission corridors combining overhead lines and underground cables introduce impedance discontinuities that significantly modify electromagnetic transient behavior. These discontinuities generate traveling-wave reflections, waveform distor...

(This article belongs to the Special Issue Energy, Electrical and Power Engineering: 5th Edition)
  • Communication
  • Open Access
1 Citations
1,045 Views
10 Pages

31 July 2025

The mechanisms underlying reduced deformability of red blood cells (RBCs) in Plasmodium falciparum remain unclear. The decrease in RBC deformability associated with malarial infection was measured using ektacytometry, and only mean values were evalua...

(This article belongs to the Special Issue Recent Advances in Microfluidic Sensing Devices)
  • Article
  • Open Access
340 Views
23 Pages

Waveform Analysis of Non-Sinusoidal Electrical Signals Using Cubic Spline Interpolation

  • Yaroslav Shklyarskiy,
  • Olga Bolshunova and
  • Yuliya Kuznetsova

16 October 2026

The steady increase in nonlinear loads in modern electric power systems leads to distortion of electrical signal waveforms and, consequently, to deterioration of power quality. The presence of higher harmonics in the network adversely affects electri...

(This article belongs to the Section Electrical and Electronic Engineering)
  • Article
  • Open Access
1 Citations
3,509 Views
22 Pages

29 December 2024

Three-phase diode bridge rectifiers are widely employed in various industrial applications because of their inherent simplicity, robustness, low electromagnetic interference and good overall performance. However, their use causes harmonic distortion...

(This article belongs to the Special Issue Energy, Electrical and Power Engineering: 3rd Edition)
  • Article
  • Open Access
2 Citations
3,042 Views
31 Pages

A Unified Analysis of DC–DC Converters’ Current Stress

  • Michael Njoroge Gitau,
  • Lebogang Masike and
  • Grain P. Adams

11 April 2023

There is always a need to analyze current signals generated by various DC–DC converters. For example, to determine the current stress experienced by semiconductor devices and to evaluate active and reactive power consumption in converters. The...

(This article belongs to the Special Issue Modeling, Control, and Optimization of Power Electronic Converters)
  • Article
  • Open Access
6 Citations
3,176 Views
19 Pages

12 June 2020

The number of globally deployed smart meters is rising, and so are the sampling rates at which they can meter electrical consumption data. As a consequence thereof, the technological foundation is established to track the power intake of buildings at...

(This article belongs to the Section A1: Smart Grids and Microgrids)
  • Article
  • Open Access
1 Citations
596 Views
24 Pages

Leveraging fault indicators to measure phase currents, phase-to-ground voltages, and corresponding waveforms, this paper proposes a fault section location method combined with waveform similarity analysis. A flexible neutral grounding system is devel...

  • Article
  • Open Access
14 Citations
4,533 Views
23 Pages

16 May 2022

Due to high unit capacities, electric arc furnaces are among the receivers that significantly affect the power system from which they are supplied. Arc furnaces generate a number of disturbances to the power grid, including fast-changing voltage fluc...

(This article belongs to the Special Issue Power System Dynamics and Renewable Energy Integration)
  • Article
  • Open Access
7 Citations
4,468 Views
14 Pages

The Analysis of the Symmetrical Short-Circuit Currents in Backup Power Supply Systems with Low-Power Synchronous Generators

  • Dominik Mamcarz,
  • Paweł Albrechtowicz,
  • Natalia Radwan-Pragłowska and
  • Bartosz Rozegnał

31 August 2020

This paper presents an analysis of the short-circuit currents of a synchronous generator with a rated power of 16 kVA. For this purpose, the authors carried out measurements of real short-circuit currents during laboratory tests. Additionally, a simu...

(This article belongs to the Section F: Electrical Engineering)
  • Article
  • Open Access
3 Citations
2,614 Views
11 Pages

7 December 2023

Magnetic pulse welding (MPW) is a joining method that uses Lorentz force generated from an electromagnetic field. This method not only has the advantage of not causing thermal deformation of the material and no by-products compared to the method of j...

(This article belongs to the Section Industrial Electronics)
  • Article
  • Open Access
539 Views
18 Pages

9 May 2026

In practical applications, high-temperature superconducting (HTS) cables or magnets may carry AC with DC bias, such as in superferric magnets, which can increase the AC loss of the cables or magnets. When the DC bias current is high, the resulting hi...

(This article belongs to the Special Issue Advances in Superconducting Materials: From Structure and Properties to Applications)
  • Article
  • Open Access
3 Citations
1,950 Views
17 Pages

Using the Injection System as a Sensor to Analyze the State of the Electronic Automotive System

  • Matej Kucera,
  • Miroslav Gutten,
  • Daniel Korenciak,
  • Michal Prazenica and
  • Tomasz N. Koltunowicz

18 September 2025

This paper presents a novel diagnostic method that employs the fuel injection system as a sensor for monitoring internal combustion engine pressure, analysing series resistance to detect connector degradation, and evaluating needle movement within th...

(This article belongs to the Special Issue Advanced Fault Diagnosis and Health Monitoring Techniques for Complex Engineering Systems: 2nd Edition)
  • Article
  • Open Access
514 Views
21 Pages

A low-voltage alternating current (AC) field (20 V peak-to-peak, 1 kHz) was superimposed on a conventional direct current (DC) electrospinning configuration in order to test whether the shape of that perturbation measurably alters fiber formation. A...

  • Article
  • Open Access
17 Citations
6,914 Views
14 Pages

Insulator Contamination Forecasting Based on Fractal Analysis of Leakage Current

  • Weigen Chen,
  • Wanping Wang,
  • Qing Xia,
  • Bing Luo and
  • Licheng Li

20 July 2012

In this paper, an artificial pollution test is carried out to study the leakage current of porcelain insulators. Fractal theory is adopted to extract the characteristics hidden in leakage current waveforms. Fractal dimensions of the leakage current f...

  • Article
  • Open Access
3 Citations
205 Views

Interrater Reliability of Spectral Doppler Waveform: Analysis Among Podiatric Clinicians

  • Cynthia Formosa,
  • Christian Ellul,
  • Anabelle Mizzi,
  • Stephen Mizzi and
  • Alfred Gatt

Background: Spectral Doppler ultrasound examination of pedal arteries is one of the most frequently used noninvasive assessment methods by health-care professionals for the diagnosis and ongoing monitoring of people at risk for or living with periphe...

  • Article
  • Open Access
5 Citations
3,743 Views
15 Pages

24 December 2024

Nickel (Ni) single-layer coatings were electrodeposited under varying pulse periods (T), duty cycles (θ), and average current densities (iav) using four distinct pulse current waveforms: rectangular (Rec), triangular (Tri), ramp-up triangular (...

  • Article
  • Open Access
6 Citations
3,627 Views
19 Pages

Energy Metering Integrated Circuit Behavior beyond Standards Requirements

  • Renan Quijano Cetina,
  • Yljon Seferi,
  • Steven M. Blair and
  • Paul S. Wright

12 January 2021

During the last few years, the accuracy of static electricity meters (SEM) has been questioned. Significant metering deviations with respect to a reference meter have been observed at customer premises, and laboratory experimental tests results suppo...

(This article belongs to the Special Issue Measurements, Sensors and Instrumentation for Electrical Power Systems)
  • Article
  • Open Access
2,409 Views
19 Pages

29 November 2021

Periodic calibrations of Energy Measurement Systems (EMS) installed in locomotives must be carried out to demonstrate the required accuracy established in the EN 50463-2 standard according to European Parliament and Council Directive 2008/57/EC on th...

(This article belongs to the Section Electronic Sensors)
  • Review
  • Open Access
77 Citations
7,491 Views
30 Pages

22 November 2020

Gyrocardiography (GCG) is a non-invasive technique of analyzing cardiac vibrations by a MEMS (microelectromechanical system) gyroscope placed on a chest wall. Although its history is short in comparison with seismocardiography (SCG) and electrocardio...

(This article belongs to the Special Issue Sensors for Gait, Posture and Health Monitoring)
  • Article
  • Open Access
3 Citations
1,984 Views
18 Pages

24 May 2023

The doubly salient electromagnetic generator (DSEG) has the advantages of flexible control, high robustness, and low cost. Since multiple stator poles share a common set of field windings, the magnetic circuit of each phase is asymmetrical, which lim...

  • Article
  • Open Access
94 Citations
11,578 Views
14 Pages

Impact of Power Converter Current Ripple on the Degradation of PEM Electrolyzer Performances

  • François Parache,
  • Henri Schneider,
  • Christophe Turpin,
  • Nicolas Richet and ,
  • Olivier Debellemanière,
  • Éric Bru,
  • Anh Thao Thieu,
  • Caroline Bertail and
  • Christine Marot
  • + 4 authors+ 0 author

19 January 2022

In this study, an endurance test of 3000 h was conducted on four equivalent proton exchange membrane (PEM) electrolyzers to identify and quantify the impact of an electric ripple current on their durability. Three different typical power converter wa...

(This article belongs to the Special Issue Modeling, Degradation Study, Failures Diagnosis and Faulty Operating Management of Electrolyzers)
  • Article
  • Open Access
2 Citations
2,927 Views
17 Pages

Analysis of Leakage Current in Dynamic Wireless Power Transfer Systems Based on LCC-S Architecture

  • Siyu Hou,
  • Benhui Zhang,
  • Yanjin Hou,
  • Xuenan Sun and ,
  • Tongkun Zhang,
  • Xiaoyu Zhang and
  • Qianfang Sun
  • + 2 authors+ 0 author

This paper investigates the issue of leakage current at the transmitter in the Dynamic Wireless Power Transfer (DWPT) system for electric vehicles and puts forward a novel bilateral resonant compensation topology structure based on the conventional L...

  • Article
  • Open Access
496 Views
22 Pages

Experimental Core Loss Characterization of a Switched Reluctance Motor Stator

  • Thisuri H. Indiketiya,
  • Sudesh C. Priyadarshana,
  • Battur Batkhishig and
  • Berker Bilgin

27 July 2026

Core loss significantly impacts the efficiency of a switched reluctance motor (SRM), especially under high-frequency operation. Conventional measurement methods are often inadequate for capturing losses in assembled stator cores, where flux paths are...

  • Review
  • Open Access
20 Citations
9,790 Views
26 Pages

Overview of Radar Jamming Waveform Design

  • Yu Pan,
  • Didi Xie,
  • Yurui Zhao,
  • Xiang Wang and
  • Zhitao Huang

29 March 2025

Radar jamming waveform design is a vital part of radar jamming. Over seven to eight decades of evolution, the field has transitioned from noise signal design to coherent jamming signal design, resulting in a multitude of complex jamming styles capabl...

(This article belongs to the Special Issue Advances in Remote Sensing and Electromagnetic Spectrum Sensing: Data Acquisition and Signal Processing)
  • Article
  • Open Access
6 Citations
2,181 Views
21 Pages

The working mode classification of a triple-active-bridge converter (TAB) is the prerequisite and foundation of modulation optimization research based on time-domain analysis. Currently, systematic research on mode classification is lacking. Inadequa...

  • Article
  • Open Access
4,170 Views
25 Pages

Prediction of Lithium Oilfield Brines Based on Seismic Data: A Case Study from L Area, Northeastern Sichuan Basin, China

  • Yuxuan Zhou,
  • Yuyong Yang,
  • Zhengyang Wang,
  • Bing Zhang and ,
  • Huailai Zhou and
  • Yuanjun Wang
  • + 1 author+ 0 author

31 January 2024

Lithium is an important mineral resource and a critical element in the production of lithium batteries, which are currently in high demand. Oilfield brine has significant value as a raw material for lithium extraction. However, it is often considered...

(This article belongs to the Special Issue Seismics in Mineral Exploration)
  • Article
  • Open Access
15 Citations
9,173 Views
14 Pages

20 March 2023

Blood pressure is an important vital sign that sometimes requires continuous measurement. The current methods include cuff measurements (manual auscultation and oscillometric techniques) for non-continuous measurement and invasive arterial cannulatio...

(This article belongs to the Section Biomedical Engineering)
  • Proceeding Paper
  • Open Access
329 Views
12 Pages

Simulation and Experimental Investigation of an SRM Drive in Motoring Mode

  • Tsvetana Grigorova,
  • Georgi Bodurov and
  • Dimitar Yankov

The paper presents a simulation and experimental study of a three-phase 12/8 Switched Reluctance Motor (SRM) operating in motoring mode. The operation of the asymmetric bridge converter is analyzed, and the mathematical equations describing the phase...

(This article belongs to the Proceedings of The 15th International Scientific Conference TechSys 2026—Engineering, Technologies and Systems)
  • Article
  • Open Access
1 Citations
1,991 Views
20 Pages

18 June 2022

Since the DC-link of the dual-inverter two-stage matrix converter (TSMC) has no energy storage element, its grid-side current waveform is closely related to the load-side condition. The conventional modulation strategy of the dual-inverter TSMC is on...

(This article belongs to the Special Issue New Development of Power Electronic Converter Technology and Control Technology in Motor Systems)
  • Article
  • Open Access
1 Citations
3,188 Views
16 Pages

4 October 2024

Multi-level inverters have characteristics suitable for high-voltage and high-power applications through various topology configurations. These reduce harmonic distortion and improve the quality of the output waveform by generating a multi-level outp...

(This article belongs to the Special Issue Feature Papers in Circuit and Signal Processing)
  • Article
  • Open Access
15 Citations
2,952 Views
26 Pages

Precise Measurements of the Temperature-Frequency Dependence of the Conductivity of Cellulose—Insulating Oil—Water Nanoparticles Composite

  • Pawel Zukowski,
  • Przemyslaw Rogalski,
  • Tomasz N. Koltunowicz,
  • Konrad Kierczynski and
  • Vitalii Bondariev

23 December 2020

This article presents direct σDC and alternating σ(f) current conductivity measurements obtained by the frequency domain spectroscopy (FDS) method on cellulose-transformer oil–water nanoparticle composite with a moisture content of...

(This article belongs to the Section A1: Smart Grids and Microgrids)

of 9