Skip to Content

9,706 Results Found

  • Article
  • Open Access
2 Citations
4,427 Views
16 Pages

25 April 2022

In the research on key technology of radiation-curing coil steel coating, it is necessary to evaluate the coating stability of radiation-curing coil steel coating materials. In this paper, a roll coating-simulation test equipment is proposed to test...

(This article belongs to the Special Issue Advances in Applied Mechatronics)
  • Article
  • Open Access
9 Citations
7,291 Views
15 Pages

15 July 2015

This paper reports on an experimental and analytical investigation conducted into efficacy of the scraping shear-test method in estimating the shearing adhesive strength of a thermally sprayed coating. It was found that the critical average shear str...

(This article belongs to the Special Issue Trends in Coatings and Surface Technology—Feature Papers)
  • Article
  • Open Access
1 Citations
2,369 Views
14 Pages

Non-Linear Evaluation of Coatings Performance: Evaluation of Polyester/Melamine Coil Coating Hydrolysis in NSS Test

  • Esteban M. García-Ochoa,
  • Xenia I. Suárez-Corrales,
  • Pablo J. Maldonado-Rivas,
  • William A. Talavera-Pech and
  • Francisco Corvo

28 July 2023

Coating is one of the most common and effective ways to protect metallic elements from corrosion. The evaluation of a coating’s performance is related to its quality and durability. Neutral salt spray (NSS) is a common accelerated test used for...

(This article belongs to the Section Corrosion, Wear and Erosion)
  • Proceeding Paper
  • Open Access
1 Citations
2,843 Views
10 Pages

Impact Test Applications Supported by FEA Models in Surface Engineering for Coating Characterization

  • Georgios Skordaris,
  • Antonios Bouzakis and
  • Konstantinos-Dionysios Bouzakis

The impact test has been used for several years, among others, for characterizing the fatigue strength, creep, adhesion and residual stresses of coatings at ambient and elevated temperatures under dry or lubricated conditions. A major advantage of th...

(This article belongs to the Proceedings of 2nd Coatings and Interfaces Web Conference (CIWC-2 2020))
  • Article
  • Open Access
33 Citations
4,901 Views
18 Pages

Explosion Test and Numerical Simulation of Coated Reinforced Concrete Slab Based on BLAST Mitigation Polyurea Coating Performance

  • Ping Lyu,
  • Zhiqiang Fang,
  • Xu Wang,
  • Weibo Huang and ,
  • Rui Zhang,
  • Yingjie Sang and
  • Pengfei Sun
  • + 2 authors+ 0 author

1 April 2022

The mechanical strength, thermal stability, thermal performance, and microstructure of Qtech T26 blast mitigation polyurea (T26 polyurea) were studied using quasi-static and dynamic mechanical experiments, thermogravimetric experiments, differential...

  • Article
  • Open Access
9 Citations
4,515 Views
24 Pages

1 February 2024

Stabilising the natural colour of wood species exposed to light in indoor conditions is a challenge that could be better addressed based on a deeper understanding of the occurring phenomena and influencing factors. This paper investigates comparative...

(This article belongs to the Special Issue International Conference Wood Science and Engineering in the Third Millennium - ICWSE 2023)
  • Proceeding Paper
  • Open Access
1 Citations
2,491 Views
7 Pages

Microbiologically induced corrosion (MIC) leads to the degradation/deterioration of concrete pipes, due to the formation of gypsum. Magnesium hydroxide powders may protect the concrete surface by maintaining alkaline pH values at the surface, or by n...

(This article belongs to the Proceedings of International Conference on Raw Materials and Circular Economy)
  • Article
  • Open Access
20 Citations
3,187 Views
20 Pages

21 April 2023

The formation of ice on nacelle causes the reduction or loss of aerodynamic performance, fuel consumption increases, reduced thrust, and the ingestion of ice, which can damage the engine. The piccolo tube anti-icing employed as an active ice protecti...

(This article belongs to the Special Issue Superhydrophobic and Icephobic Coatings as Passive Ice Protection Systems for Aeronautical Applications)
  • Review
  • Open Access
13 Citations
4,986 Views
19 Pages

Test-Rig Simulation on Hybrid Thermal Barrier Coating Assisted with Cooling Air System for Advanced Gas Turbine under Prolonged Exposures—A Review

  • Salmi Mohd Yunus,
  • Savisha Mahalingam,
  • Abreeza Manap,
  • Nurfanizan Mohd Afandi and
  • Meenaloshini Satgunam

Thermal barrier coating (TBC) and cooling air systems are among the technologies that have been introduced and applied in pursuing the extensive development of advanced gas turbine. TBC is used to protect the gas turbine components from the higher op...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
5 Citations
1,622 Views
17 Pages

On the Representativeness of Proton Radiation Resistance Tests on Optical Coatings for Interplanetary Missions

  • Anna Sytchkova,
  • Maria Lucia Protopapa,
  • Paolo Olivero,
  • Zicai Shen and
  • Yanzhi Wang

18 July 2024

Optical instrumentation used in space normally employs optical coatings. Future interplanetary space missions will be characterized by ever longer stays in environmental conditions where low energy protons represent one of the main types of radiation...

  • Article
  • Open Access
3 Citations
3,338 Views
19 Pages

Investigation of Factors Influencing the Autoclave Tests Results of Internal Anticorrosive Polymer Coatings

  • Mark Kovalev,
  • Ekaterina Alekseeva,
  • Nikita Shaposhnikov,
  • Daniil Lyashenko and
  • Vasiliy Tokarev

27 October 2021

Polymer coatings are one of the most common methods for protecting metal structures from corrosion damage. For example, in the oil and gas industry, polymer coatings are used to protect the inner surfaces of oilfield pipelines. Forecasting the servic...

(This article belongs to the Special Issue Selected Papers from the 1st International Electronic Conference on Metallurgy and Metals (IEC2M 2021))
  • Article
  • Open Access
4 Citations
5,749 Views
11 Pages

21 March 2020

In cement processing, which involves the production of clinker in rotary kilns, the main refractories used in the transition and burning zones are magnesia–spinel bricks. These bricks present suitable chemical and thermomechanical properties, n...

(This article belongs to the Special Issue Design, Properties, Damage and Lifetime of Refractory Ceramics)
  • Article
  • Open Access
8 Citations
3,450 Views
23 Pages

17 April 2024

Corrosion protection technologies based on waterborne paints have become increasingly popular as steel structure protection, which implies the need to determine relevant assessment methods considering the conditions of use and product-specific charac...

(This article belongs to the Special Issue Testing of Materials and Elements in Civil Engineering (4th Edition))
  • Article
  • Open Access
2 Citations
1,447 Views
15 Pages

26 October 2025

W/EUROFER functionally graded material (FGM) plasma-sprayed coatings are used as a protective layer in nuclear fusion applications. It is vital to develop a non-destructive test method to analyze interface characteristics and detect delamination in c...

(This article belongs to the Special Issue Advancements in Ultrasonic Testing for Metallurgical Materials)
  • Article
  • Open Access
9 Citations
5,661 Views
17 Pages

1 November 2021

Powder coatings are widely applied for corrosion protection of steel, aluminum, and hot dip galvanized steel in a variety of corrosive environments. Powder coatings are subjected to a number of strict laboratory tests to determine their mechanical pr...

(This article belongs to the Special Issue Recent Advances in Coatings, Adhesives and Construction Materials)
  • Article
  • Open Access
14 Citations
7,416 Views
23 Pages

30 October 2024

Anticorrosive organic coatings are usually tested with accelerated weathering methods to assess their anticorrosive performance. The results of lab testing often do not correlate well with results from field testing, which resembles the conditions of...

(This article belongs to the Special Issue Advances in Corrosion Protection by Coatings)
  • Article
  • Open Access
12 Citations
4,225 Views
18 Pages

The Anti-Snow Behaviour of Icephobic Coatings: Laboratory and In-Field Testing

  • Marcella Balordi,
  • Giorgio Santucci de Magistris,
  • Alessandro Casali,
  • Francesco Pini and ,
  • Andrea Cammi,
  • Matteo Lacavalla and
  • Vincenzo Rotella
  • + 2 authors+ 0 author

14 March 2023

Overhead power line conductors and ground wires are affected by ice and snow accretion which can easily adhere to their surface, causing the breakage of cables and the collapse of pylons due to excessive weight. In Italy, the main concern is about we...

  • Article
  • Open Access
21 Citations
5,460 Views
19 Pages

Correlating the Performance of a Fire-Retardant Coating across Different Scales of Testing

  • Yan Hao Ng,
  • Indraneel Suhas Zope,
  • Aravind Dasari and
  • Kang Hai Tan

2 October 2020

Material-scale tests involving milligrams of samples are used to optimize fire-retardant coating formulations, but actual applications of these coatings require them to be assessed with structural-scale fire tests. This significant difference in the...

(This article belongs to the Section Polymer Physics and Theory)
  • Article
  • Open Access
13 Citations
4,024 Views
11 Pages

Comparison of Lifetime of the PVD Coatings in Laboratory Dynamic Impact Test and Industrial Fine Blanking Process

  • Josef Daniel,
  • Radek Žemlička,
  • Jan Grossman,
  • Andreas Lümkemann and ,
  • Peter Tapp,
  • Christian Galamand and
  • Tomáš Fořt
  • + 2 authors+ 0 author

6 May 2020

Protective hard PVD coatings are used to improve the endurance of the tools exposed to repeated impact load, e.g., fine blanking punches. During the fine blanking process, a coated punch repeatedly impacts sheet metal. Thus, the coating which protect...

  • Article
  • Open Access
15 Citations
5,272 Views
12 Pages

16 January 2023

Conductors consisting of thin layers are commonly used in many industries as protective, insulating or thermal barrier coatings (TBC). Nondestructive testing of these types of structures allows one to determine their dimensions and technical conditio...

(This article belongs to the Special Issue State-of-the-Art Sensors Technology in Poland 2021-2022)
  • Article
  • Open Access
4 Citations
2,241 Views
27 Pages

A Novel Approach to Rockwell and Scratch Adhesion Tests for Hard Coatings Deposited onto Ti6Al4V Substrates

  • Emanuele Ghio,
  • Maria Francesca Bonilauri,
  • Giovanni Bolelli,
  • Paolo Colombi and
  • Emanuela Cerri

8 September 2025

The paper aims to investigate the failure modes induced by the Rockwell indentation test on Diamond-Like Carbon (DLC)-based and AlCrN coatings deposited on rolled and additively manufactured Ti6Al4V substrates with different surface finishes and subj...

(This article belongs to the Special Issue Additive Manufacturing and Characterization of Metallic Alloys and Composites)
  • Feature Paper
  • Article
  • Open Access
1 Citations
1,656 Views
18 Pages

17 June 2026

Hard chromium coatings are widely used for their excellent wear and corrosion resistance, but replacing conventional hexavalent chromium with safer trivalent chromium processes remains limited by adhesion-related issues. This study proposes a simple,...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Review
  • Open Access
10 Citations
3,965 Views
32 Pages

Recent Advances in Non-Destructive Testing Technology for Coated Steel Structure Welds

  • Zhiyong Ji,
  • Dongsheng Xu,
  • Honglun Wang,
  • Junzhe Chen and
  • Yunwei Fu

13 November 2025

The fabrication of a steel structure facility in the aerospace sector was executed through the implementation of welding techniques. In order to reduce the effects of environmental corrosion and extend its service life, it is typically coated with a...

(This article belongs to the Special Issue Sensor-Based Frequency, Time–Frequency and Higher-Order Signal Processing for Condition Monitoring, Structural Health Monitoring and Non-Destructive Testing (Second Edition))
  • Article
  • Open Access
29 Citations
11,461 Views
7 Pages

Beverage cans are used for energy drinks, soft-drinks, sparkling waters, and beer. Bisphenol A is still part of the formulation of epoxy coatings of beverage cans. Due to concerns that bisphenol A acts as an endocrine-active substance, the migration...

  • Article
  • Open Access
354 Views
19 Pages

Influence of Horn-Type Cavity Acoustic Coatings on the Error of Force–Sound Reciprocity Testing for Underwater Structures

  • Tao Peng,
  • Rongwu Xu,
  • Zilong Peng,
  • Jiarui Zhang and ,
  • Jinwei Liu and
  • Suchen Xu
  • + 1 author+ 0 author

6 September 2026

Accurate measurement of vibro-acoustic transfer functions is essential for ship noise control. Because direct testing requires high-power excitation sources that are difficult and costly to deploy, the reciprocity method has attracted increasing atte...

(This article belongs to the Section Ocean Engineering)
  • Article
  • Open Access
6 Citations
2,138 Views
11 Pages

Self-Cleaning Solar Mirror Coatings: From the Laboratory Scale to Prototype Field Tests

  • Anna Castaldo,
  • Emilia Gambale,
  • Giuseppe Vitiello and
  • Giuseppe Cara

31 July 2024

In this study, a low-cost, scalable and robust process is proposed as an innovative method for coating solar mirrors with a self-cleaning, transparent in the full solar range and versatile material based on auxetic aluminum nitrides, previously obtai...

(This article belongs to the Special Issue Advanced Solar Energy Materials: Methods and Applications)
  • Article
  • Open Access
2 Citations
1,888 Views
20 Pages

26 December 2024

Coated metallic stents are the next generation of metallic stents with improved surface properties. To evaluate the degradation behavior of stents in vitro, different in vitro degradation models can be applied: (i) static immersion test: degradation...

(This article belongs to the Special Issue Advances in New Alloys, Polymers and Composites for Biomedical Applications)
  • Article
  • Open Access
3,138 Views
14 Pages

7 October 2021

The photothermocapillary (PTC) effect is a deformation of the free surface of a thin liquid layer on a solid material that is caused by the dependence of the coefficient of surface tension on temperature. The PTC effect is highly sensitive to variati...

(This article belongs to the Topic Fiber-Reinforced Cementitious Composites)
  • Article
  • Open Access
8 Citations
3,288 Views
16 Pages

3 February 2023

An epoxy-coated reinforcement geopolymer concrete structure with good durability and energy-saving properties can be formed by combining epoxy-coated reinforcement and geopolymer concrete. The bond strength is the precondition for the two to work tog...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
4 Citations
3,641 Views
18 Pages

Multi-Analytical Study of Damage to Marine Ballast Tank Coatings After Cyclic Corrosion Testing

  • Yanwen Liu,
  • Douglas Beaumont,
  • Xiaorong Zhou,
  • Timothy Burnett and ,
  • Suzanne Morsch,
  • Stuart Lyon,
  • Paul Iannarelli,
  • Claudio Di Lullo,
  • Niek Hijnen and
  • Teruo Hashimoto
  • + 7 authors+ 2 authors

Seawater ballast tanks in vessels are subject to severe service conditions caused by repeated filling/emptying, as well as temperature variation. Consequently, relatively thick, barrier-type coatings are used for corrosion protection of their interna...

(This article belongs to the Special Issue Advances in Corrosion Protection by Coatings)
  • Article
  • Open Access
19 Citations
7,668 Views
12 Pages

Spectral Domain Optical Coherence Tomography for Non-Destructive Testing of Protection Coatings on Metal Substrates

  • Marcel Lenz,
  • Cristian Mazzon,
  • Christopher Dillmann,
  • Nils C. Gerhardt and ,
  • Hubert Welp,
  • Michael Prange and
  • Martin R. Hofmann
  • + 2 authors+ 0 author

6 April 2017

In this paper we demonstrate that optical coherence tomography (OCT) is a powerful tool for the non-destructive investigation of transparent coatings on metal substrates. We show that OCT provides additional information which the common practice elec...

(This article belongs to the Special Issue Development and Application of Optical Coherence Tomography (OCT))
  • Article
  • Open Access
12 Citations
2,941 Views
11 Pages

Evaluation for Crack Defects of Self-Lubricating Sliding Bearings Coating Based on Terahertz Non-Destructive Testing

  • Yonglin Huang,
  • Yi Huang,
  • Shuncong Zhong,
  • Caihong Zhuang and ,
  • Tingting Shi,
  • Zhenghao Zhang,
  • Zhixiong Chen and
  • Xincai Liu
  • + 3 authors+ 0 author

25 February 2023

In this study, a non-destructive testing method for crack defects of self-lubricating sliding bearing coating based on terahertz time-domain spectroscopy was proposed. The self-lubricating coating materials were revealed to have good penetration and...

  • Article
  • Open Access
9 Citations
4,259 Views
25 Pages

A major problem in lubricated piston ring/cylinder liner contact sliding systems is the tribological failure mechanisms known as scuffing. In order to evaluate and better understand this damage phenomenon in these tribological systems, a tilted linea...

  • Feature Paper
  • Article
  • Open Access
14 Citations
4,810 Views
16 Pages

Diamond-like carbon (DLC) coatings are used, among other contexts, on machine parts subjected to repetitive impact loads at ambient and elevated temperatures. Hereupon, the film load capacity may not be consistent when the operational temperature inc...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
15 Citations
3,289 Views
20 Pages

28 August 2021

The Microbiologically Induced Corrosion (MIC) of concrete sewer pipes is a commonly known problem that can lead to the destruction of the system, creating multiple public health issues and the need for costly repair investments. The present study foc...

(This article belongs to the Special Issue Corrosion in Concrete: Inhibitors and Coatings)
  • Article
  • Open Access
3 Citations
1,448 Views
27 Pages

Wind Tunnel Tests on Anti-Icing Performance of Wind Turbine Blade with NACA0018 Airfoil with Bio-Wax PCMS-PUR Coating

  • Zheng Sun,
  • Yiting Wang,
  • He Shen,
  • Haotian Zheng and ,
  • Hailin Li,
  • Yan Li and
  • Fang Feng
  • + 2 authors+ 0 author

7 November 2025

The increasing prominence of blade icing in wind power generation within cold regions has positioned anti-icing coating technology as a key research focus. This study synthesised phase-change microcapsules using bio-wax as the core material and isoph...

(This article belongs to the Special Issue Recent Advances in Superhydrophobic and Icephobic Surfaces, Second Edition)
  • Article
  • Open Access
7 Citations
2,681 Views
15 Pages

26 July 2023

This paper presents the results of tests of a new mono-component polyurethane coating for wood with the aim of evaluating its effect on Ayous (Triplochiton scleroxylon K. Schum), which is a wood species used in Europe for various applications, especi...

(This article belongs to the Special Issue Advances in Surface Modification and Coatings of Wood and Wood Composites)
  • Article
  • Open Access
24 Citations
6,004 Views
19 Pages

In order to study ice protection systems for rotating blades, a new experimental setup has been developed at the Anti-Icing Materials International Laboratory (AMIL). This system consists of two small-scale rotating blades in a refrigerated icing win...

(This article belongs to the Special Issue Deicing and Anti-Icing of Aircraft (Volume II))
  • Article
  • Open Access
1 Citations
1,528 Views
15 Pages

Wear Testing and Anti-Wear Performance Analysis of Surface Coating Materials for Stay Vanes of a Francis Turbine

  • Yangyang Hu,
  • Lijie Zhang,
  • Xiaobing Liu,
  • Yongzhong Zeng and ,
  • Jiayang Pang,
  • Tianlin Li,
  • Yuanjiang Ma,
  • Zhongquan Wang,
  • Longchao Gan and
  • Dong Huang
  • + 5 authors+ 0 author

31 May 2025

The wear of the flow passage components of the turbine due to sediment in sandy rivers is an inevitable challenge for hydroelectric units, often requiring frequent maintenance of hydraulic turbines. Consequently, the anti-wear protection technologies...

(This article belongs to the Section Hydraulics and Hydrodynamics)
  • Article
  • Open Access
21 Citations
4,761 Views
15 Pages

27 March 2023

Wind turbines operating in cold regions are prone to blade icing, which seriously affects their aerodynamic characteristics and safety performance. Coatings are one of the effective solutions to the icing problem on wind turbine blades. In this study...

(This article belongs to the Special Issue Recent Advances in Superhydrophobic and Icephobic Surfaces)
  • Article
  • Open Access
4 Citations
2,167 Views
17 Pages

Tribological Properties of DLC Coatings in Model-Based and Real-Life Tests

  • Katarzyna Piotrowska,
  • Monika Madej and
  • Krystian Milewski

11 September 2025

Machinery for internal transport in open-pit mines experiences excessive wear. Belt conveyors used for transporting aggregates are a type of equipment in which bearings are especially prone to failure. Considering the significant financial impact of...

(This article belongs to the Special Issue Fabrication and Properties of Functional Coatings Under Extreme Conditions)
  • Article
  • Open Access
6 Citations
5,061 Views
8 Pages

Effects of the Oxide Coating Thickness on the Small Flaw Sizing Using an Ultrasonic Test Technique

  • Xiujuan Miao,
  • Xiongbing Li,
  • Hongwei Hu,
  • Guangjun Gao and
  • Shuzeng Zhang

9 February 2018

When magnesium alloys are tested using ultrasonic techniques, their oxide coating will affect the transmitted ultrasonic energy and the accuracy of the flaw sizing. In this work, the effects of the coating thickness on the flaw sizing are investigate...

(This article belongs to the Special Issue Advanced Nondestructive Evaluation and Characterization of Surface)
  • Article
  • Open Access
29 Citations
7,634 Views
18 Pages

Preparation and Performance Test of the Super-Hydrophobic Polyurethane Coating Based on Waste Cooking Oil

  • Yingmo Cheng,
  • Dejun Miao,
  • Lingxiao Kong,
  • Jiachen Jiang and
  • Zhenxing Guo

15 December 2019

In order to solve the problem of dust accumulation on the fin surface of a mine air cooler, a method of preparing super-hydrophobic polyurethane (SPU) coating based on waste cooking oil (WCO) was proposed. Firstly, the polyurethane prepolymer was syn...

  • Article
  • Open Access
2 Citations
2,252 Views
25 Pages

27 September 2024

Hybrid turbine blade protection systems, which combine thermal barrier coatings (TBCs) and cooling mechanisms, are essential for safeguarding turbine blades in advanced gas turbine applications. However, conventional furnace evaluation methods are in...

  • Article
  • Open Access
2 Citations
1,927 Views
12 Pages

An Effectiveness Analysis for the Multi-Factor Accelerated Test of a Copper-Free Self-Polishing Antifouling Coating

  • Meng Chang,
  • Junwei Jia,
  • Congshu Huang,
  • Shaonan Zhang and ,
  • Lirong Tang,
  • Lingling Jiang,
  • Haoyuan Ma,
  • Hao Lang,
  • Qingqing Wang and
  • Jiashuo Yan
  • + 5 authors+ 0 author

26 September 2023

In order to eliminate or slow down the corrosion of various marine facilities, it has become a necessary choice to develop and use effective antifouling coatings for the development of marine equipment. This paper takes the newly developed copper-fre...

  • Article
  • Open Access
1 Citations
271 Views
31 Pages

18 September 2026

This study presents a manufacturing route for pre-impregnated functional powder coatings (PCs) intended for fibre-reinforced polymer (FRP) composites, including vacuum-infused sandwich structures. PCs comprising powder, thermoplastic nonwoven and twi...

(This article belongs to the Topic Advances in Coatings Technology and Their Multidisciplinary Applications)
  • Article
  • Open Access
9 Citations
2,926 Views
19 Pages

Influence of AC-DC-AC Cycling with Hydrostatic Pressure on Accelerated Protective Performance Test of Glass Flake Epoxy Coating

  • Yong Shen,
  • Likun Xu,
  • Yilong Liu,
  • Yonghong Lu and ,
  • Haibo Xu,
  • Rongrong Zhao,
  • Shuangfeng Bai,
  • Yonglei Xin,
  • Jian Hou and
  • Feng Liu
  • + 6 authors+ 1 author

27 October 2023

To achieve fast testing of the barrier properties of organic coatings, immersion tests, AC-DC-AC tests, and coupled tests of AC-DC-AC with hydrostatic pressure were conducted in seawater for a glass flake epoxy coating. Electrochemical impedance spec...

  • Article
  • Open Access
10 Citations
44,790 Views
16 Pages

Terahertz Non-Destructive Testing of Porosity in Multi-Layer Thermal Barrier Coatings Based on Small-Sample Data

  • Dongdong Ye,
  • Zhou Xu,
  • Houli Liu,
  • Zhijun Zhang and ,
  • Peiyong Wang,
  • Yiwen Wu and
  • Changdong Yin
  • + 2 authors+ 0 author

25 October 2024

Accurately characterizing the internal porosity rate of thermal barrier coatings (TBCs) was essential for prolonging their service life. This work concentrated on atmospheric plasma spray (APS)-prepared TBCs and proposed the utilization of terahertz...

(This article belongs to the Special Issue Advances in Measurement and Data Analysis of Surfaces with Functionalized Coatings)
  • Feature Paper
  • Article
  • Open Access
8 Citations
2,360 Views
13 Pages

6 March 2025

Microstructure evolution and cracking behavior of a four-layer thermal barrier coating (TBC) with double YSZ layers during thermal cycle tests were studied in the current work. The temperature range of the thermal cycle test ranged from room temperat...

(This article belongs to the Special Issue Advances of Ceramic and Alloy Coatings, 2nd Edition)
  • Article
  • Open Access
6 Citations
1,928 Views
25 Pages

Analysis of Influence of Coating Type on Friction Behaviour and Surface Topography of DC04/1.0338 Steel Sheet in Bending Under Tension Friction Test

  • Tomasz Trzepieciński,
  • Krzysztof Szwajka,
  • Marek Szewczyk,
  • Joanna Zielińska-Szwajka and ,
  • Marek Barlak,
  • Katarzyna Nowakowska-Langier and
  • Sebastian Okrasa
  • + 2 authors+ 0 author

19 November 2024

The working conditions of tools during plastic working operations are determined by, among other things, temperature, loads, loading method, and processing speed. In sheet metal forming processes, additionally, lubricant and tool surface roughness pl...

(This article belongs to the Section Thin Films and Interfaces)

of 195