In this study, we aimed to investigate the differences in tissue surface adaptation and the variations in distances between reference points on the polished surfaces of 3D-printed denture bases produced at different build angles. The build angles wer...
We study the problem of morphing two polygons of building footprints at two different scales. This problem frequently occurs during the continuous zooming of interactive maps. The ground plan of a building footprint on a map has orthogonal characteri...
In the existing building stock, typically characterised by a high degree of irregularity, the effects of earthquakes are strongly dependent on the epicentre–structure direction and the angle of incidence of the seismic motion. However, the scie...
The angle of seismic excitation is a significant factor in the seismic response of RC buildings. The procedure required for the calculation of the angle for which the potential seismic damage is maximized (critical angle) contains multiple nonlinear...
Recently, remote sensing satellite image analysis has received significant attention from geo-information scientists. However, the current geo-information systems lack automatic detection of several building characteristics inside the high-resolution...
With the rapid advancement of solar energy, accurate solar irradiance data at different tilt angles are increasingly needed for PV system design. However, measuring irradiance at all possible angles is impractical, necessitating simulation-based appr...
The dimensional accuracy of the intaglio surface of complete dentures fabricated using liquid crystal display (LCD) three-dimensional (3D) printing might be influenced by the build angle and post-processing storage conditions. This study evaluated th...
Building change detection is a critical field for monitoring artificial structures using high-resolution multitemporal images. However, relief displacement depending on the azimuth and elevation angles of the sensor causes numerous false alarms and m...
This paper investigates the fragment performance of several composite panels for attaching to the inside walls of a building structure. These panels were developed using different types of fiber woven fabrics (W0, W90) combined with distinct layers o...
Advances in the development of additive manufacturing materials (AM) and the low availability of studies on the impact response of AM specimens are the main reasons for this paper. Therefore, the influence of building orientation (vertical and horizo...
This article explores the fatigue characteristics of acrylonitrile butadiene styrene (ABS) components fabricated using fused filament fabrication (FFF) additive manufacturing technology. ABS is frequently used as a polymeric thermoplastic material in...
Additive manufacturing using vat photopolymerization (VPP) resin materials has gained attention for fabricating dental prostheses; however, the effects of material type and build angle on their properties remain unclear. We compared the mechanical pr...
Selective laser melting (SLM) is well suited for the efficient manufacturing of complex structures because of its manufacturing methodology. The optimized process parameters for each alloy has been a cause for debate in recent years. In this study, t...
This research highlights correlation modeling between residential buildings orientation toward the runway as noise source and noise level. Many studies used noise mapping to identify noise performance in cities, but none of them discussed building or...
High-rise buildings (HRBs) as modern and visually unique land use continue to increase due to urbanization. Therefore, large-scale monitoring of HRB is very important for urban planning and environmental protection. This paper performed object-based...
Landmark building models typically exhibit intricate structures, posing challenges for retrieval using generic descriptors. To address this challenge, this paper abstracts and simplifies the model into simple topological structures grounded in topolo...
The Fiber Bragg Grating (FBG) sensing technique is suitable for a wide variety of measurements, including temperature, pressure, acceleration, liquid level, etc., and has been applied to many bridges and buildings in the past two decades. The fact th...
As urban energy demand increases and available roof space remains limited, balcony photovoltaic (PV) systems have emerged as a promising distributed renewable energy solution. This study aims to evaluate the multidimensional benefits of these systems...
Different formulations for 3D printable cementitious composites have been developed for extrusion-based printing. However, there is a lack of configuration guides for actual printing operations, which integrate one printable material and one printing...
Applications of MEMS-based sensing technology are beneficial and versatile. If these electronic sensors integrate efficient processing methods, and if supervisory control and data acquisition (SCADA) software is also required, then mass networked rea...
The aim of this study is to investigate the influence of printing material, build angle, and artificial aging on the accuracy of SLA- and DLP-printed occlusal devices in comparison to each other and to subtractively manufactured devices. A total of 1...
Building outlines are important for emergency response, urban planning, and change analysis and can be quickly extracted from remote sensing images and raster maps using deep learning technology. However, such building outlines often have irregular b...
The increase in urban building density will have a significant impact on pedestrian wind environments, especially in high-density urban building environments. Architectural designers should consider the impact of the urban microclimate through reason...
The geometric shape of the roof and the opening position are important parameters influencing the internal cross-ventilation of buildings. Although there has been extensive research on natural ventilation, most of it has focused on flat or sloping ro...
We measured and analyzed the building penetration losses for four different kinds of facades as a function of the incidence angle and polarization at 3.5 GHz, which is a frequency of interest for fifth generation (5G) communication systems. Results s...
Curvilinear building forms are increasingly common in modern architecture, yet their impact on wind dynamics remains understudied. This research examines the wind flow behavior around high-rise residential building rows configured with convex and con...
A variety of printable resins for denture bases are available, without detailed instructions on print parameters. This study aimed to evaluate the effect of the printing build angle and the layer thickness of 3D-printed denture base resins before and...
Pedestrian wind comfort is a critical factor in the design of sustainable and livable dense urban areas. This study systematically investigates the effects of surrounding building height and wind incidence angle on pedestrian-level wind conditions, a...
Metal parts formed by laser additive manufacturing methods usually have large surface roughness, which affects the corrosion resistance of the parts. This study reported the reason for and mechanism of the large surface roughness of 316L stainless st...
The optimal three-dimensional (3D) printing parameters of removable partial denture (RPD) frameworks should be studied to achieve the best accuracy, printing time, and least materials consumed. This study aimed to find the best build angle and suppor...
In the event of a typhoon, the majority of houses suffer from large amounts of damage because they were not built with typhoon resilience in mind. For instance, the Philippines is one of the world’s most vulnerable countries to typhoons. Often,...
Thin-walled structures are extensively utilized in construction because of their lightweight nature and excellent energy absorption efficiency, especially under dynamic loads. Improving the energy-absorbing performance of thin-walled structures by in...
The aim of this study is to evaluate the wear volume of interim crowns fabricated using digital light processing 3D printing according to the printing angle. A total of five patients undergoing the placement of a single crown on the mandibular molar...
In the present paper, we address the influence of print orientation angle on surface roughness obtained in lateral walls in fused deposition modelling (FDM) processes. A geometrical model is defined that considers the shape of the filaments after dep...
This paper proposes a novel method to estimate the lateral displacement of high-rise structures under wind loads. The coefficient β(x) is firstly derived, reflecting the relation between the structural lateral dynamic displacement and the inclin...
In common construction practice, various examples can be found involving a building type consisting of a lower, older, reinforced concrete structure and a more recent upper steel part, forming a so-called “hybrid” building. Conventional s...
A numerical investigation of the seismic behaviour of asymmetrical low-rise reinforced concrete (R/C) frames is performed considering the deformability of the supporting soil. The typical rigid base assumption is adopted by most current seismic desig...
An experimental study was conducted to investigate the aerodynamic loads on roof-mounted solar arrays. Four different parapet heights of 0 m, 0.9 m, 1.2 m, 1.5 m, and two tilt angles of 5° and 10°, are set to examine their effects on wind pre...
The concentrating photovoltaic/thermal (PVT) collectors offer the benefits of the reduced per-unit price of electrical energy and co-generation of electrical and thermal energies by intensifying the solar irradiation falling on the hybrid receiving p...
Background: With CAD-CAM, dental models are often fabricated by additive manufacturing (AM) methods. Dental models for implant prostheses involve the manual placement of analogs, which could affect their final fit. Therefore, in this experimental in...
Oil peony is an important oil crop that is primarily sown by using artificial methods at present. Its seeder encounters the problems of low efficiency of seeding that significantly limits the highly efficient mechanized production of high-quality peo...
Additive manufacturing is increasingly integrated into dental technology, yet the mechanical performance of 3D-printed denture base resins remains strongly influenced by printing orientation and post-curing duration. This study evaluated the combined...
Conventional buildings made of reinforced concrete (r/c) or steel are practically encountered daily in common construction practice. Current regulations offer complete guidance on the seismic design and dimensioning of typical structures made of the...
Additive manufacturing is now an integral part of digital prosthodontic workflows, and although stereolithography (SLA) is widely used for denture base fabrication, the dimensional accuracy of printed dentures remains highly dependent on manufacturin...
The difficulty in identifying collapsed houses and damaged structures in synthetic aperture radar (SAR) images after natural disasters represents a significant challenge in the monitoring of urban structural deformation using SAR. SAR image simulatio...
Structural efficiency of tapered tall buildings has been well recognized, and many tall buildings of tapered forms have been built throughout the world. Tall buildings are built with an enormous amount of building materials. As one of the most effici...
Although many efforts have been made on building shadow detection from aerial images, little research on simultaneous shadows detection on both building roofs and grounds has been presented. Hence, this paper proposes a new method for simultaneous sh...
Despite Fused Deposition Modeling (FDM) being an economical 3D printing method known for its material versatility and ease of use, the mechanical performance of FDM-produced components is significantly influenced by process parameter settings. This s...
The topical literature lacks any comparison between stereolithography (SLA) and direct light processing (DLP) printing methods with regard to the accuracy of complete denture base fabrication, thereby utilizing materials certified for this purpose. I...
Three-dimensional SAR imaging of urban buildings is currently a hotspot in the research area of remote sensing. Synthetic Aperture Radar (SAR) offers all-time, all-weather, high-resolution capacity, and is an important tool for the monitoring of buil...
of 32