Next Article in Journal
Effects of the Left Ventricular Mechanics on Left Ventricular-Aortic Interaction: Insights from Ex Vivo Beating Rat Heart Experiments
Previous Article in Journal
Dynamic Responses of Harbor Seal Whisker Model in the Propeller Wake Flow
Previous Article in Special Issue
Three-Dimensional Numerical Simulation of Flow Around a Spur Dike in a Meandering Channel Bend
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
This is an early access version, the complete PDF, HTML, and XML versions will be available soon.
Article

Assessing Pedestrian Comfort in Dense Urban Areas Using CFD Simulations: A Study on Wind Angle and Building Height Variations

by
Paulo Ulisses da Silva
1,
Gustavo Bono
2,* and
Marcelo Greco
1
1
Programa de Pós-Graduação em Engenharia de Estruturas, Universidade Federal de Minas Gerais—UFMG, Belo Horizonte 31270-901, MG, Brazil
2
Núcleo de Tecnologia, Universidade Federal de Pernambuco—UFPE, Caruaru 50104-900, PE, Brazil
*
Author to whom correspondence should be addressed.
Fluids 2025, 10(9), 233; https://doi.org/10.3390/fluids10090233
Submission received: 4 July 2025 / Revised: 9 August 2025 / Accepted: 29 August 2025 / Published: 1 September 2025
(This article belongs to the Special Issue Computational Fluid Dynamics Applied to Transport Phenomena)

Abstract

Pedestrian wind comfort is a critical factor in the design of sustainable and livable dense urban areas. This study systematically investigates the effects of surrounding building height and wind incidence angle on pedestrian-level wind conditions, analyzing a nine-building arrangement through validated Computational Fluid Dynamics (CFD) simulations. Scenarios included neighborhood heights varying from 0L to 6L and wind angles from 0° to 45°. The results reveal that wind angles aligned with urban canyons (0° case) induce a strong Venturi effect, creating hazardous conditions with Mean Velocity Ratio (MVR) peaks reaching 3.42. Conversely, an oblique 45° angle mitigates high speeds by promoting flow recirculation. While increasing neighborhood height generally intensifies channeling, the study also highlights that even an isolated building (0L case) can generate hazardous localized velocities due to flow separation around its corners. The Overall Mean Velocity Ratio (OMVR) analysis identifies that, among the studied cases, a 2L neighborhood height is the most tolerable configuration, striking a balance between sheltering and channeling effects. Ultimately, these findings highlight for urban planners the importance of analyzing diverse geometric configurations and wind scenarios, reinforcing the value of CFD as an essential tool for designing safer and more comfortable public spaces.
Keywords: CFD; RANS; pedestrian comfort; wind comfort; building configuration CFD; RANS; pedestrian comfort; wind comfort; building configuration

Share and Cite

MDPI and ACS Style

Silva, P.U.d.; Bono, G.; Greco, M. Assessing Pedestrian Comfort in Dense Urban Areas Using CFD Simulations: A Study on Wind Angle and Building Height Variations. Fluids 2025, 10, 233. https://doi.org/10.3390/fluids10090233

AMA Style

Silva PUd, Bono G, Greco M. Assessing Pedestrian Comfort in Dense Urban Areas Using CFD Simulations: A Study on Wind Angle and Building Height Variations. Fluids. 2025; 10(9):233. https://doi.org/10.3390/fluids10090233

Chicago/Turabian Style

Silva, Paulo Ulisses da, Gustavo Bono, and Marcelo Greco. 2025. "Assessing Pedestrian Comfort in Dense Urban Areas Using CFD Simulations: A Study on Wind Angle and Building Height Variations" Fluids 10, no. 9: 233. https://doi.org/10.3390/fluids10090233

APA Style

Silva, P. U. d., Bono, G., & Greco, M. (2025). Assessing Pedestrian Comfort in Dense Urban Areas Using CFD Simulations: A Study on Wind Angle and Building Height Variations. Fluids, 10(9), 233. https://doi.org/10.3390/fluids10090233

Article Metrics

Back to TopTop