With unique 4f electronic shells, rare earth metal-based catalysts have been attracting tremendous attention in electrocatalysis, including oxygen reduction reaction (ORR). In particular, atomically dispersed Ce/CeO2-based catalysts have been explore...
The effect of support on the performance of Pd1Ag10/Al2O3 and Pd1Ag10/CeO2–ZrO2 catalysts in the selective hydrogenation of diphenylacetylene (DPA) was studied. Characterization of the catalyst by DRIFTS-CO and HRTEM revealed the formation of a...
The application of composite materials as catalysts for the oxidation of CO and other toxic compounds is a promising approach for air purification. In this work, the composites comprising palladium and ceria components supported on multiwall carbon n...
Al-Ti-C-(Ce) grain refiners were prepared by combining in-situ reaction, hot extrusion, and adding CeO2. The effects of second phase TiC particle size and distribution, extrusion ratio, and Ce addition on the grain-refining performance of grain refin...
The composite nanomaterials based on noble metals, reducible oxides, and nanostructured carbon are considered to be perspective catalysts for many useful reactions. In the present work, multi-walled carbon nanotubes (MWCNTs) were used for the prepara...
Through use of the hydrothermal technique, various shaped CeO2 supports, such as nanocubes (CeO2-C), nanorods (CeO2-R), and nanoparticles (CeO2-P), were synthesized and employed for supporting Ni species as catalysts for a maleic anhydride hydrogenat...
This paper reports on the synthesis of Ce-doped ZnO (CZO) nanoparticles (NPs) by an alternative polyol method at low temperature. The method, facile and rapid, uses acetate-based precursors, ethylene glycol as solvent, and polyvinylpyrrolidone as cap...
A series of Ce1−xFexVO4 (x = 0, 0.25, 0.50, 0.75, 1) catalysts prepared by modified hydrothermal synthesis were used for selective catalytic reduction (SCR) of NOx with NH3. Among them, Ce0.5Fe0.5VO4 showed the highest catalytic activity. The c...
Heat-treated aluminum–silicon (Al-Si)-based alloys have dominated the cast lightweight alloy industry for several decades. However, in the last decade, Al-Ce-based alloys have shown promise in replacing Al-Si alloys as they remove the need for...
A Ce-containing Ni-based tungsten carbide layer was prepared on the surface of Q345 steel by plasma arc cladding technology. The effect of CeO2 additions on the microstructure and properties of the Ni-based tungsten carbide cladding layer was investi...
The development of catalysts for low-temperature methane combustion is crucial in addressing the greenhouse effect. An effective industrial catalyst strategy involves optimizing noble metal utilization and boosting metal–metal interaction. Here...
The accumulation of caries-preventive compounds on sound enamel is crucial in order to improve the inhibition of carious lesion initiation. The aim of this research was to investigate the initial accumulation of cerium, oligopeptide p11-4, and fluori...
Dextran coated cerium doped hydroxyapatite (Ca10-xCex(PO4)6(OH)2), with x = 0.05 (5CeHAp-D) and x = 0.1 (10CeHAp-D) were deposited on Si substrates by radio frequency magnetron sputtering technique for the first time. The morphology, composition, and...
A series of Fe–Ce–Ti catalysts were prepared via co-precipitation method to investigate the effect of doping Ce into Fe–Ti catalysts for selective catalytic reduction of NO with NH3. The NO conversion over Fe–Ce–Ti catalysts was considerably improved...
Imidazole molecules entrapped in porous materials can exhibit high and stable proton conductivity suitable for elevated temperature (>373 K) fuel cell applications. In this study, new anhydrous proton conductors based on imidazole and mesoporous K...
Within the context of electron transfer during the catalytic water oxidation reaction, the Ir-based system is among the most active. The reaction, mimicking photosynthesis II, requires the use of an electron acceptor such the Ce4+ cation. This comple...
In this study, a critical comparison between two low metal (Ni) loading catalysts is presented, namely Ni/Al2O3 and Ni/AlCeO3 for the glycerol steam reforming (GSR) reaction. The surface and bulk properties of the catalysts were evaluated using a ple...
Despite their high atomic dispersion, single site catalysts with Pt supported on CeO2 were found to have a low activity during oxidation reactions. In this study, we report the behavior of Pt/CeO2 single site catalyst under more complex gas mixtures,...
A series of NiO–CeO2 mixed oxide catalysts have been synthesized by a modified coprecipitation method at three different pH values (pH = 8, 9, and 10). The NiO–CeO2 mixed oxide samples were characterized by TGA, XRD, inductively coupled p...
Cu-Ce(Mn)-Al oxide catalysts to NO removal in the broad temperature range were synthesized and tested. The precursor of copper aluminium spinel was obtained with the coprecipitation method. By this method, Cu–Al spinels with various amounts of...
Supported Pt-based catalysts have been identified as highly selective catalysts for CO oxidation, but their potential for applications has been hampered by the high cost and scarcity of Pt metals as well as aggregation problems at relatively high tem...
Chemical looping reforming (CLR) technique is a prospective option for hydrogen production. Improving oxygen mobility and sintering resistance are still the main challenges of the development of high-performance oxygen carriers (OCs) in the CLR proce...
This work reports the effect of different amounts of ceria nanoparticles on UV resistance and barrier properties of water-based polyurethane (WPU) on glass and AA7075 aluminum alloy substrates. Hybrid coatings were synthesized from an aliphatic WPU–H...
The water–gas-shift (WGS) reaction was studied on a series of supported Cu catalysts in which the MgAl2O4 (MAO) support was modified by depositing ZnO, CeO2, Mn2O3 and CoO using Atomic Layer Deposition (ALD). Addition of Cu by one ALD cycle gav...
In the present work, nanocomposites-based 3XXX series Al alloy with three different types of hard nanoparticles, including TiO2, C, and CeO2, were produced employing two techniques such as mechanical milling and stir-casting method in order to evalua...
To improve the catalytic performance of an active layered double hydroxide (LDH)-derived CuCeMgAlO mixed oxide catalyst in the total oxidation of methane, it was promoted with different transition-metal cations. Thus, two series of multicationic mixe...
In this paper, we employed plasma electrolytic oxidation (PEO) of aluminum in a water solution of sodium tungstate (Na2WO4∙2H2O) with the addition of the pure and Ce-loaded zeolites clinoptilolite and 13 X for the preparation of oxide coatings. The o...
The rational design of highly efficient, noble metal-free metal oxides is one of the main research priorities in the area of catalysis. To this end, the fine tuning of ceria-based mixed oxides by means of aliovalent metal doping has currently receive...
In this work we studied nanoceria (CeO2NPs) and nanoceria modified by 5-fluorouracil (5FU) as potential APIs. Nanoceria were synthesized by precipitation in a matrix of hydroxyethyl cellulose or hydroxypropylmethyl cellulose, using cerium (III) nitra...
Cu/Ce binary oxides were prepared via the one-pot solvothermal method, and the effects of different cerium precursors (cerium nitrate and cerium ammonium nitrate) on the catalytic activity and resistance to water vapor or CO2 of the prepared samples...
The activity of emission control catalysts must be improved in urban mode at low temperatures. One possible way is to tailor the metal-support interaction between platinum group metals (PGMs) and ceria to stabilize small clusters or single atoms, opt...
Fly ash from the combustion of eastern Kentucky Fire Clay coal in a southeastern United States pulverized-coal power plant was studied by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and selected area electron diffracti...
CuO-CeO2 catalysts, with 6 wt % of Cu, have been synthesised by different preparation methods (calcination of nitrate precursors, thermal urea-nitrate combustion, freeze-drying method, using polymethyl metacrylate PMMA microspheres as template and pr...
Pure and Ce-modified ZnO nanosheet-like polycrystalline samples were successfully synthesized by a simple and fast microwave-based process and tested as photocatalytic materials in environmental remediation processes. In an attempt to clarify the act...
Various COx species formed upon the adsorption and oxidation of CO on palladium and silver single atoms supported on a model ceria nanoparticle (NP) have been studied using density functional calculations. For both metals M, the ceria-supported MCOx...
Developing thin-film nanocomposite (TFN) membranes by incorporating nanomaterials into the selective polyamide (PA) layer is an effective strategy to improve separation and antibacterial properties. In this study, TFN nanofiltration (NF) membranes we...
Structured hydrotalcite NiAl-HT material with Ni/Al atomic ratio of 2.5 was prepared by co-precipitation of Ni and Al nitrate precursors and then modified by the addition of 1 wt% Ce and/or 3 wt% Au species. The obtained materials, after calcination...
This research revealed the response of Ga and Al sublattices to the incorporation of mismatching substituents in Gd3Al2Ga3O12:Ce single crystals. Incompatible in size and charge, Li+ and Mg2+ substituents violated configurational entropy. This led to...
A series of M(x)CoCeMgAlO mixed oxides with different transition metals (M = Cu, Fe, Mn, and Ni) with an M content x = 3 at. %, and another series of Fe(x)CoCeMgAlO mixed oxides with Fe contents x ranging from 1 to 9 at. % with respect to cations, wh...
High-efficiency diesel and lean-burn engines produce lower exhaust temperatures, which can delay the activation of after-treatment catalysts such as Diesel Oxidation Catalysts (DOCs). This study explores ion beam sputtering as a post-synthesis strate...
The selective oxidation of veratryl alcohol (VA), a model compound of lignin, with oxygen molecules to produce veratraldehyde (VAld) was studied over monometallic Au, Pd, and bimetallic Au:Pd nanoparticles supported on a Ce0.62Zr0.38O2 mixed oxide fo...
This study presented an optimisation study of two-stage vapour-phase catalytic glycerol reforming (VPCGR) using response surface methodology (RSM) with a central composite experimental design (CCD) approach. Characterisation through Brunauer–Em...
In this paper, NiO, La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) and (CeO2)0.8(Sm2O3)0.2 (SDC) nanopowders with different microstructures were obtained using hydrothermal and glycol–citrate methods. The microstructural features of the powders were exa...
A confined jet mixing reactor operated in continuous hydrothermal flow synthesis was investigated for the synthesis of CeO2-ZrO2 (CZ) nanoparticles. The obtained ultrafine powders were characterized using scanning electron microscopy–energy dis...
In this study, an in situ synthesis approach based on electrochemical reduction and ion exchange was employed to detect carbaryl species using a disposable, screen-printed carbon electrode fabricated with nanocomposite materials. Reduced graphene oxi...
In this study, various techniques, including X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDS) mapping, X-ray photoelectron spectroscopy (...
The hydrothermal synthesis of nickel oxide in the presence of triethanolamine was studied. Furthermore, the relationship between the synthesis conditions, thermal behavior, crystal structure features, phase composition and microstructure of semi-prod...
We report the time-efficient synthesis of quinolin-8-yl 4-chlorobenzoate (3) via an O-acylation reaction between 8-hydroxyquinoline (1) and 4-chlorobenzoyl chloride (2) mediated by triethylamine in acetonitrile under heating at 80 °C for 20 min i...
In this study, Ti-Co-Ce getter films were deposited via magnetron sputtering to investigate their activation mechanism—the thermal removal of surface passivation layers to restore gas sorption capability. The morphology before and after film ac...