Skip to Content
You are currently on the new version of our website. Access the old version .

1,169 Results Found

  • Article
  • Open Access
7 Citations
3,021 Views
9 Pages

Microstructure and Mechanical Properties of TiN/Ti2AlN Multilayers

  • Donglin Ma,
  • Yao Liu,
  • Qiaoyuan Deng,
  • Yantao Li and
  • Yongxiang Leng

1 February 2023

Titanium nitride (TiN) thin films deposited by high-power pulsed magnetron sputtering usually have a high compressive residual stress, which is not conducive for the adherence of TiN thin films. This study investigated the potential of Ti2AlN for rel...

  • Article
  • Open Access
15 Citations
3,107 Views
16 Pages

Formation Mechanism of High-Purity Ti2AlN Powders under Microwave Sintering

  • Weihua Chen,
  • Jiancheng Tang,
  • Xinghao Lin,
  • Yunlong Ai and
  • Nan Ye

26 November 2020

In the present study, high-purity ternary-phase nitride (Ti2AlN) powders were synthesized through microwave sintering using TiH2, Al, and TiN powders as raw materials. X-ray diffraction (XRD), differential scanning calorimetry (DSC), transmission ele...

  • Article
  • Open Access
15 Citations
5,515 Views
9 Pages

Investigations of the Deuterium Permeability of As-Deposited and Oxidized Ti2AlN Coatings

  • Lukas Gröner,
  • Lukas Mengis,
  • Mathias Galetz,
  • Lutz Kirste and ,
  • Philipp Daum,
  • Marco Wirth,
  • Frank Meyer,
  • Alexander Fromm,
  • Bernhard Blug and
  • Frank Burmeister
  • + 5 authors+ 0 author

1 May 2020

Aluminum containing Mn+1AXn (MAX) phase materials have attracted increasing attention due to their corrosion resistance, a pronounced self-healing effect and promising diffusion barrier properties for hydrogen. We synthesized Ti2AlN coatings on ferri...

(This article belongs to the Special Issue Advanced Coatings for Corrosion Protection)
  • Article
  • Open Access
17 Citations
4,010 Views
11 Pages

Synthesis and Characterization of a Nearly Single Bulk Ti2AlN MAX Phase Obtained from Ti/AlN Powder Mixture through Spark Plasma Sintering

  • Christopher Salvo,
  • Ernesto Chicardi,
  • Rosalía Poyato,
  • Cristina García-Garrido and ,
  • José Antonio Jiménez,
  • Cristina López-Pernía,
  • Pablo Tobosque and
  • Ramalinga Viswanathan Mangalaraja
  • + 3 authors+ 0 author

26 April 2021

MAX phases are an advanced class of ceramics based on ternary carbides or nitrides that combine some of the ceramic and metallic properties, which make them potential candidate materials for many engineering applications under severe conditions. The...

(This article belongs to the Special Issue Novel Ceramic Materials for the Energy Transition)
  • Article
  • Open Access
15 Citations
5,925 Views
11 Pages

Low Temperature Step Annealing Synthesis of the Ti2AlN MAX Phase to Fabricate MXene Quantum Dots

  • Sophia Akhtar,
  • Shrawan Roy,
  • Trang Thu Tran,
  • Jaspal Singh and ,
  • Anir S. Sharbirin and
  • Jeongyong Kim
  • + 1 author+ 0 author

20 April 2022

We present the synthesis of the Ti2AlN MAX phase using two-step annealing at temperatures of 600 °C and 1100 °C, the lowest synthesis temperatures reported so far. After the successful synthesis of the Ti2AlN MAX phase, two-dimensional Ti2N M...

(This article belongs to the Topic Optical and Optoelectronic Materials and Applications)
  • Article
  • Open Access
12 Citations
3,400 Views
13 Pages

Study of the Influence of Sintering Atmosphere and Mechanical Activation on the Synthesis of Bulk Ti2AlN MAX Phase Obtained by Spark Plasma Sintering

  • Christopher Salvo,
  • Ernesto Chicardi,
  • Cristina García-Garrido,
  • Rosalía Poyato and ,
  • José A. Jiménez and
  • R. V. Mangalaraja
  • + 1 author+ 0 author

14 August 2021

The influence of the mechanical activation process and sintering atmosphere on the microstructure and mechanical properties of bulk Ti2AlN has been investigated. The mixture of Ti and AlN powders was prepared in a 1:2 molar ratio, and a part of this...

(This article belongs to the Special Issue Novel Materials Synthesis by Mechanical Alloying/Milling)
  • Article
  • Open Access
5 Citations
3,117 Views
14 Pages

16 March 2022

A study is presented on the synthesis of reaction-mixed nitride nanopowders in the reference system of aluminium nitride AlN, gallium nitride GaN, and titanium nitride TiN (Al:Ga:Ti = 1:1:1) followed by their high-pressure and high-temperature sinter...

(This article belongs to the Section Advanced Nanomaterials and Nanotechnology)
  • Article
  • Open Access
1 Citations
1,485 Views
15 Pages

Hot-Pressing of Ti-Al-N Multiphase Composite: Microstructure and Properties

  • Ryszard Sitek,
  • Kamil Bochenek,
  • Piotr Maj,
  • Michał Marczak and ,
  • Krzysztof Żaba,
  • Mateusz Kopec,
  • Grzegorz Piotr Kaczmarczyk and
  • Janusz Kamiński
  • + 3 authors+ 0 author

27 January 2025

This study focuses on the development and characterization of a bulk Ti-Al-N multiphase composite enriched with BN addition and sintered through hot pressing. The research aimed to create a material with optimized mechanical and corrosion-resistant p...

(This article belongs to the Special Issue Emerging Non-Destructive Testing Technologies: Advances and Applications)
  • Article
  • Open Access
26 Citations
5,202 Views
15 Pages

Comparison Study of PVD Coatings: TiN/AlTiN, TiN and TiAlSiN Used in Wood Machining

  • Beata Kucharska,
  • Paweł Czarniak,
  • Krzysztof Kulikowski,
  • Agnieszka Krawczyńska and ,
  • Krzysztof Rożniatowski,
  • Jerzy Kubacki,
  • Karol Szymanowski,
  • Peter Panjan and
  • Jerzy Robert Sobiecki
  • + 4 authors+ 0 author

14 October 2022

In this paper, we analyze the possibilities of the protection of tools for wood machining with PVD (Physical Vapor Deposition) hard coatings. The nanolayered TiN/AlTiN coating, nanocomposite TiAlSiN coatings, and single layer TiN coating were analyze...

(This article belongs to the Special Issue Advanced Materials – Microstructure, Manufacturing and Analysis)
  • Article
  • Open Access
13 Citations
3,471 Views
13 Pages

Analysis of Microstructure and Properties of a Ti–AlN Composite Produced by Selective Laser Melting

  • Ryszard Sitek,
  • Maciej Szustecki,
  • Lukasz Zrodowski,
  • Bartlomiej Wysocki and ,
  • Jakub Jaroszewicz,
  • Paweł Wisniewski and
  • Jaroslaw Mizera
  • + 2 authors+ 0 author

12 May 2020

Selective Laser Melting (SLM) is a manufacturing technique that is currently used for the production of functional parts that are difficult to form by the traditional methods such as casting or CNC (Computer Numerical Control) cutting from a wide ran...

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
24 Citations
5,170 Views
18 Pages

10 July 2023

The high chemical activity, low thermal conductivity, and high strength of titanium alloys lead to severe tool wear during cutting. The coating applied to the tool surface insulates the effect of heat and chemical reactions. TiAlSiN coating and AlCrN...

(This article belongs to the Special Issue Ceramic Materials and Coatings: From Materials to Applications)
  • Article
  • Open Access
15 Citations
3,361 Views
13 Pages

In this study, five AlTiCrN nitride coatings were deposited via high-power impulse magnetron sputtering (HiPIMS). The AlTiCrN coatings were synthesized with high contents of Al or Ti and a lower fraction of Cr, using Ti and Al70Cr30 targets with five...

  • Communication
  • Open Access
426 Views
13 Pages

26 June 2026

TiN/TiAlN coatings were deposited on 40Cr steel substrates by DC magnetron sputtering to improve the surface tribological performance of the steel. The influence of sputtering power (80, 100, 120, 140, 160 and 180 W) on coating morphology, phase stru...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
7 Citations
2,218 Views
15 Pages

Wear Behavior of TiN/TiAlSiN Nanocomposite Multilayer Coatings from Ambient Temperature to Medium Temperature

  • Hairui Ma,
  • Qiang Miao,
  • Wenping Liang,
  • Shijie Sun and ,
  • Yan Qi,
  • Feilong Jia and
  • Xiangle Chang
  • + 2 authors+ 0 author

4 September 2024

TiN/TiAlSiN nanocomposite multilayer coatings were deposited on a titanium alloy by multi-arc ion plating. The investigation of the wear behavior of TiN/TiAlSiN multilayer coatings against Si3N4 was conducted at temperatures of 25 °C, 300 °C,...

  • Article
  • Open Access
22 Citations
5,471 Views
11 Pages

Tribological Properties and Cutting Performance of AlTiN Coatings with Various Geometric Structures

  • Bin Li,
  • Yuxiang Xu,
  • Guoliang Rao,
  • Qimin Wang and ,
  • Jun Zheng,
  • Ruiyuan Zhu and
  • Yubo Chen
  • + 2 authors+ 0 author

9 February 2023

The development of advanced machining techniques requires high-performance tool coatings. To improve the wear resistance and cutting performance of AlTiN coatings, a structure optimization strategy involving bias control and a nano-multilayer archite...

(This article belongs to the Section Corrosion, Wear and Erosion)
  • Article
  • Open Access
19 Citations
3,835 Views
10 Pages

3 December 2019

In this study, three kinds of coatings, AlTiN, AlTiN–Ni, and AlTiN–Cu were deposited via the cathodic arc evaporation method. The microstructure, mechanical properties, oxidation resistance, and cutting behavior of these coatings were the...

  • Article
  • Open Access
6 Citations
3,591 Views
15 Pages

17 January 2025

When combined with ceramics, ternary carbides, nitrides, and borides form a class of materials known as MAX phases. These materials exhibit a multilayer hexagonal structure and are very strong, damage tolerant, and thermally stable. Further, they hav...

(This article belongs to the Special Issue Modern Technologies in the Manufacturing of Metal Matrix Composites)
  • Article
  • Open Access
380 Views
18 Pages

Ultrasonic Soldering of AlN/Cu Using SiC-Modified Zn5Al3Ti Active Solder

  • Tomas Melus,
  • Roman Kolenak,
  • Mikulas Sloboda,
  • Peter Gogola and
  • Matej Pasak

6 July 2026

This study investigates the effect of SiC nanoparticle addition on the microstructure, interfacial reactions, and mechanical properties of Zn5Al3Ti active solder used for ultrasonic soldering of AlN ceramic to copper substrates. Composite solders con...

(This article belongs to the Special Issue Mechanical and Metallurgical Behaviour of Welded Materials—2nd Edition)
  • Article
  • Open Access
2 Citations
2,863 Views
10 Pages

12 December 2022

A multilayer structure and incorporation of the fourth element are promising strategies to improve the properties of TiAlN coatings. In this study, the structural, mechanical, and thermal properties of the Ti0.34Al0.48Ta0.18N/Ti0.42Al0.54B0.04N multi...

(This article belongs to the Section Corrosion, Wear and Erosion)
  • Article
  • Open Access
12 Citations
3,395 Views
15 Pages

3 March 2023

TiCrAlN hard films based on TiN or CrN show superior properties in terms of hardness, wear resistance, and thermal stability due to the addition of alloying elements. AlCrTiN films based on AlN may have higher thermal shock properties, but the knowle...

(This article belongs to the Special Issue Structure and Phase Transformations in Thin Films)
  • Article
  • Open Access
15 Citations
6,113 Views
13 Pages

The Formation of Composite Ti-Al-N Coatings Using Filtered Vacuum Arc Deposition with Separate Cathodes

  • Ivan A. Shulepov,
  • Egor B. Kashkarov,
  • Igor B. Stepanov,
  • Maxim S. Syrtanov and ,
  • Alina N. Sutygina,
  • Ivan Shanenkov,
  • Aleksei Obrosov and
  • Sabine Weiß
  • + 3 authors+ 0 author

12 November 2017

Ti-Al-N coatings were deposited on high-speed steel substrates by filtered vacuum arc deposition (FVAD) during evaporation of aluminum and titanium cathodes. Distribution of elements, phase composition, and mechanical properties of Ti-Al-N coatings w...

  • Article
  • Open Access
28 Citations
4,801 Views
18 Pages

Tribological Behaviors of Super-Hard TiAlN Coatings Deposited by Filtered Cathode Vacuum Arc Deposition

  • Zhiqiang Zhang,
  • Lan Zhang,
  • Heng Yuan,
  • Menglin Qiu and ,
  • Xu Zhang,
  • Bin Liao,
  • Fengshou Zhang and
  • Xiaoping Ouyang
  • + 3 authors+ 0 author

17 March 2022

High hardness improves the material’s load-bearing capacity, resulting in the enhancement of tribological properties. However, the high hardness is difficult to achieve for TiAlN coating due to the transformation of the close-packed structure f...

(This article belongs to the Topic Surface Engineered Materials)
  • Article
  • Open Access
16 Citations
7,135 Views
12 Pages

Metal/Semiconductor Barrier Properties of Non-Recessed Ti/Al/Ti and Ta/Al/Ta Ohmic Contacts on AlGaN/GaN Heterostructures

  • Monia Spera,
  • Giuseppe Greco,
  • Raffaella Lo Nigro,
  • Silvia Scalese and ,
  • Corrado Bongiorno,
  • Marco Cannas,
  • Filippo Giannazzo and
  • Fabrizio Roccaforte
  • + 3 authors+ 0 author

10 July 2019

This paper compares the metal/semiconductor barrier height properties of non-recessed Ti/Al/Ti and Ta/Al/Ta contacts on AlGaN/GaN heterostructures. Both contacts exhibited a rectifying behavior after deposition and after annealing at temperatures up...

(This article belongs to the Special Issue Volume II: Semiconductor Power Devices)
  • Article
  • Open Access
9 Citations
2,037 Views
14 Pages

Influence of Molybdenum Addition on the Structure, Mechanical Properties, and Cutting Performance of AlTiN Coatings

  • Tao Yang,
  • Jun Yin,
  • Puyou Ying,
  • Changhong Lin and ,
  • Ping Zhang,
  • Jianbo Wu,
  • Alexander Kovalev,
  • Min Huang,
  • Tianle Wang and
  • Vladimir Levchenko
  • + 7 authors+ 2 authors

3 December 2024

Though AlTiN coating has been intensively studied, there is still a need to develop AlTiN coating to meet the growing demand of industrial machining. One effective way to improve the performance of AlTiN coating is by adding alloying elements. In thi...

(This article belongs to the Special Issue Wear-Resistant Coatings and Film Materials)
  • Article
  • Open Access
7 Citations
4,227 Views
12 Pages

14 December 2021

Dry milling of hardened steel is an economical and environmentally friendly machining process for manufacturing a mold and die. Advances in coating technology makes the dry milling a feasible approach instead of a traditional grinding process. Howeve...

  • Feature Paper
  • Article
  • Open Access
6 Citations
2,882 Views
9 Pages

Features of the Oxidation of Multilayer (TiAlCrSiY)N/(TiAlCr)N Nanolaminated PVD Coating during Temperature Annealing

  • Anatoly Ivanovich Kovalev,
  • Vladimir Olegovich Vakhrushev,
  • Egor Pavlovich Konovalov,
  • German Simonovich Fox-Rabinovich and ,
  • Dmitry Lvovich Wainstein,
  • Stanislav Alekseevich Dmitrievskii and
  • Alise Denisovna Mukhsinova
  • + 2 authors+ 0 author

27 January 2023

A nano-multilayer Ti0.2Al0.55Cr0.2Si0.03Y0.02N/Ti0.25Al0.65Cr0.1N PVD coating was deposited on Kennametal carbide K 313 inserts. These coatings are widely used to protect cutting tools under severe exploitation conditions. Under equilibrium condition...

(This article belongs to the Special Issue 2D Materials-Based Thin Films and Coatings)
  • Article
  • Open Access
8 Citations
2,816 Views
23 Pages

Effects of PVD CrAlN/(CrAlB)N/CrAlN Coating on Pin–Disc Friction Properties of Ti2AlNb Alloys Compared to WC/Co Carbide at Evaluated Temperatures

  • Jinfu Zhao,
  • Lirui Zheng,
  • Wenqian Li,
  • Zhanqiang Liu and ,
  • Liangliang Li,
  • Bing Wang,
  • Yukui Cai,
  • Xiaoping Ren and
  • Xiaoliang Liang
  • + 4 authors+ 0 author

2 June 2024

Physical vapor deposition (PVD) coatings could affect the friction performance at the contact interface between Ti2AlNb alloy parts and tool couples. Suitable coating types could improve the friction properties of Ti2AlNb alloy while in contact with...

(This article belongs to the Section Entropic Alloys and Meta-Metals)
  • Article
  • Open Access
5 Citations
2,102 Views
18 Pages

Effect of Al Content on the Wear Evolution of Ti1-xAlxN-Coated Tools Milling Ti-6Al-4V Alloy

  • Guanghui Fan,
  • Jingjie Zhang,
  • Peirong Zhang,
  • Jin Du and ,
  • Chonghai Xu,
  • Mingdong Yi and
  • Guoqing Zhang
  • + 2 authors+ 0 author

10 June 2023

Ti1-xAlxN coating is formed by replacing some Ti atoms in TiN with Al atoms, and their properties are closely related to Al content (0 < x < 1). Recently, Ti1-xAlxN-coated tools have been widely used in the machining of Ti-6Al-4V alloy. In this...

(This article belongs to the Special Issue Advanced Manufacturing Technology and Systems, 2nd Edition)
  • Article
  • Open Access
6 Citations
3,800 Views
14 Pages

Selective laser melting (SLM) is an important advanced additive manufacturing technology. The existing SLM products cannot fully meet the requirements of high-precision and strength of the mechanical component because of their defects. The TiAlN/TiN...

  • Article
  • Open Access
65 Citations
7,450 Views
16 Pages

Cavitation Erosion and Sliding Wear Mechanisms of AlTiN and TiAlN Films Deposited on Stainless Steel Substrate

  • Mirosław Szala,
  • Mariusz Walczak,
  • Kamil Pasierbiewicz and
  • Mariusz Kamiński

The resistance to cavitation erosion and sliding wear of stainless steel grade AISI 304 can be improved by using physical vapor deposited (PVD) coatings. The aim of this study was to investigate the cavitation erosion and sliding wear mechanisms of m...

(This article belongs to the Special Issue Selected Papers from the 1st Coatings and Interfaces Web Conference (CIWC-1))
  • Article
  • Open Access
46 Citations
6,680 Views
19 Pages

25 August 2022

Titanium-based alloys have gained worldwide application over the past century. However, their low wear resistance remains an unresolved challenge for the Ti6Al4V alloy, which has significant industrial use. Therefore, it is an integral part in materi...

(This article belongs to the Special Issue Multifunctional Coatings and Lubrication)
  • Article
  • Open Access
21 Citations
2,998 Views
17 Pages

High-Temperature Oxidation and Wear Resistance of TiAlSiN/AlCrN Multilayer Coatings Prepared by Multi-Arc Ion Plating

  • Jie Liu,
  • Haijuan Mei,
  • Junfang Hua,
  • Juan Wang and ,
  • Yongchao Wang,
  • Genmiao Yi and
  • Xin Deng
  • + 2 authors+ 0 author

27 March 2025

TiAlSiN and AlCrN coatings are two representative coatings with excellent properties in TiN-based and CrN-based coatings, respectively. Multilayering is one of the most important directions for coating performance optimization. In this paper, nanosca...

(This article belongs to the Special Issue Design and Applications of Heterogeneous Nanostructured Materials)
  • Article
  • Open Access
1 Citations
1,684 Views
17 Pages

Investigation of the Mechanical Properties and Friction Coefficient of Cr/CrTiAl and Cr/(CrTiAl)N/CrTiAl PVD Coatings Deposited on 42CrMo4 QT Steel

  • Yavor Sofronov,
  • Boyan Dochev,
  • Valentin Mishev,
  • Antonio Nikolov and ,
  • Krum Petrov,
  • Rayna Dimitrova,
  • Milko Yordanov,
  • Milko Angelov,
  • Georgi Todorov and
  • Krassimir Marchev
  • + 5 authors+ 0 author

17 February 2026

Test specimens fabricated from 42CrMo4 steel were subjected to heat treatment comprising quenching followed by high-temperature tempering. This treatment is commonly referred to as hardening, and the result is a tempered sorbite microstructure that p...

(This article belongs to the Special Issue Recent Advances in Surface Modification of Metallic Materials)
  • Article
  • Open Access
5 Citations
2,424 Views
12 Pages

Comparative Study of Corrosion Behavior of LPCVD-Ti0.17Al0.83N and PVD-Ti1−xAlxN Coatings

  • Shaoqing Wang,
  • Wei Ji,
  • Yaru Wang,
  • Jiantao Wei and ,
  • Lianchang Qiu,
  • Chong Chen,
  • Xiaojun Jiang,
  • Qingxuan Ran and
  • Rihong Han
  • + 4 authors+ 0 author

15 June 2022

In the present work, a low-pressure chemical vapor deposition (LPCVD) Ti0.17Al0.83N and state-of-the-art arc ion plating PVD-Ti1−xAlxN (x = 0.25, 0.55, 0.60, 0.67) coatings were deposited on cemented carbide substrate. The morphological, struct...

  • Article
  • Open Access
5 Citations
6,466 Views
10 Pages

28 February 2013

TiAlN/Al2O3 multilayers with different Ar/N2 ratios were deposited on Si substrates in different N2 partial pressure by magnetron sputtering. The crystalline and multilayer structures of the multilayers were determined by a glancing angle X-ray diffr...

(This article belongs to the Special Issue Advances in Multifunctional Materials)
  • Article
  • Open Access
42 Citations
6,589 Views
21 Pages

15 August 2019

In the metalworking industry, different processes and applications require the utilisation of custom designed tools. The selection of the appropriated substrate material and its pre-treatment as well as the protective coating are of great importance...

  • Article
  • Open Access
2 Citations
2,338 Views
22 Pages

29 September 2025

Beta (β)-type Ti-29Nb-13Ta-4.6Zr (TNTZ) alloys combine low modulus with biocompatibility but require improved surface properties for long-term implantation. This study aimed to enhance the surface mechanical strength and antibacterial performanc...

(This article belongs to the Special Issue Films and Coatings with Biomedical Applications)
  • Article
  • Open Access
13 Citations
3,526 Views
17 Pages

Influence of Different Types of Cemented Carbide Blades and Coating Thickness on Structure and Properties of TiN/AlTiN and TiAlN/a-C:N Coatings Deposited by PVD Techniques for Machining of Wood-Based Materials

  • Beata Kucharska,
  • Jerzy Robert Sobiecki,
  • Pawel Czarniak,
  • Karol Szymanowski and ,
  • Konrad Cymerman,
  • Dorota Moszczyńska and
  • Peter Panjan
  • + 2 authors+ 0 author

22 May 2021

The influence of different types of cemented carbide blades and thickness of TiAlN/a-C:N and TiN/AlTiN protective coatings used in the wood industry on cutting performance has been studied. Three types of WC-Co cemented carbide blades with different...

  • Article
  • Open Access
19 Citations
3,861 Views
14 Pages

7 May 2023

The objective of this study was to investigate the effect of varying bias parameters (−50 V, −100 V, and −150 V) on the properties of TiN/CrN multilayer films deposited on Ti-6Al-4V alloy using the cathodic arc deposition (CAD) tech...

  • Article
  • Open Access
9 Citations
4,955 Views
14 Pages

Microstructure and Properties of TiN/TiCN/Al2O3/TiN Coating Enhanced by High-Current Pulsed Electron Beam

  • Feiyu Ge,
  • Ziteng Xia,
  • Haoming Yuan,
  • Siyang Guo and ,
  • Zhijun Hu,
  • Jintong Guan,
  • Jie Cai,
  • Qingfeng Guan and
  • Peng Lyu
  • + 4 authors+ 0 author

23 March 2024

In this work, a TiN/TiCN/Al2O3/TiN coating deposited onto cemented carbide matrix by chemical vapor deposition was irradiated by high-current pulsed electron beam (HCPEB). The influence of pulse times on the phase composition, microstructure, and mec...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
41 Citations
5,943 Views
17 Pages

25 July 2018

Physical Vapor Deposition (PVD) Ti1−xAlxN coated cemented carbide tools are commonly used to cut difficult-to-machine super alloy of Inconel 718. The Al concentration x of Ti1−xAlxN coating can affect the coating microstructure, mechanica...

(This article belongs to the Special Issue Machining—Recent Advances, Applications and Challenges)
  • Article
  • Open Access
55 Citations
18,492 Views
20 Pages

Influence of Yttrium on the Thermal Stability of Ti-Al-N Thin Films

  • Martin Moser,
  • Daniel Kiener,
  • Christina Scheu and
  • Paul H. Mayrhofer

4 March 2010

Ti1-xAlxN coated tools are commonly used in high-speed machining, where the cutting edge of an end-mill or insert is exposed to temperatures up to 1100 °C. Here, we investigate the effect of Yttrium addition on the thermal stability of Ti1-xAlxN coat...

  • Article
  • Open Access
17 Citations
5,514 Views
13 Pages

Comparative Characterization of the TiN and TiAlN Coatings Deposited on a New WC-Co Tool Using a CAE-PVD Technique

  • Alecs Andrei Matei,
  • Ramona Nicoleta Turcu,
  • Ion Pencea,
  • Eugen Herghelegiu and ,
  • Mircea Ionut Petrescu and
  • Florentina Niculescu
  • + 1 author+ 0 author

7 January 2023

The main objective of this work was to assess and compare the structure and mechanical properties of the TiN and TiAlN coatings deposited on a new WC-Co tool using the cathodic arc evaporation vacuum deposition (CAE-PVD) technique. The cutting tool w...

(This article belongs to the Section Hybrid and Composite Crystalline Materials)
  • Article
  • Open Access
3 Citations
2,272 Views
18 Pages

8 January 2025

Low-pressure cold-spray (LPCS) aluminum is widely used for coating depositions in various engineering applications but is limited by its low hardness and poor wear resistance. To improve these properties, ceramic particles are added to form metallic...

(This article belongs to the Special Issue Metal Composite Materials and Their Interface Behavior)
  • Article
  • Open Access
19 Citations
3,541 Views
16 Pages

Comparison of Surface Morphology and Tool Wear in the Machining of Ti-6Al-4V Alloys with Uncoated and TiAlN Tools under Dry, Minimum Quantity Lubrication, Flood Cooling, and Low-Temperature Spray Jet Cooling Conditions

  • Jinfu Zhao,
  • Zhanqiang Liu,
  • Zipeng Gong,
  • Annan Liu and ,
  • Yukui Cai,
  • Bing Wang,
  • Qinghua Song,
  • Xiaoliang Liang,
  • Yanbin Zhang and
  • Haiyang Ji
  • + 6 authors+ 1 author

17 June 2023

TiAlN-coated carbide tools have been used to machine Ti-6Al-4V alloys in aviation workshops. However, the effect of TiAlN coating on surface morphology and tool wear in the processing of Ti-6Al-4V alloys under various cooling conditions has not been...

(This article belongs to the Section D: Materials and Processing)
  • Article
  • Open Access
1 Citations
5,552 Views
8 Pages

TiAl3 and TiN composite nanoparticles were continuously synthesized from Ti–48Al master alloy by hydrogen plasma-metal reaction in a N2, H2 and Ar atmosphere. The phase, morphology, and size of the nanoparticles were studied by X-ray diffraction (XRD...

(This article belongs to the Special Issue Plasma Nanoengineering and Nanofabrication)
  • Article
  • Open Access
5 Citations
2,578 Views
20 Pages

Interaction of Si Atom with the (001) Surface of TiN, AlN and TaN Compounds

  • Leonid Svyatkin,
  • Sergey Ognev,
  • Maxim Syrtanov and
  • Yury Koroteev

17 August 2023

Nowadays, the application of multicomponent coatings with multiphase nanocrystalline structure is the most promising direction in the search for wear-resistant protective coatings with a full set of necessary operational properties. Nanocrystalline m...

(This article belongs to the Special Issue Protective Composite Coatings: Implementation, Structure, Properties)
  • Article
  • Open Access
5 Citations
4,013 Views
20 Pages

Morphological and Compositional Studies on Al/Ti/TiN/Si, Al/TiN/Si, Al/W/Si, Al/WN/Si Systems to Test the Diffusion Barrier Properties of Nanoscale-Thick Layers between Al and Si

  • Maria Censabella,
  • Cristina Drago,
  • Brunella Cafra,
  • Paolo Badalà and ,
  • Anna Bassi,
  • Giovanni Piccitto,
  • Salvatore Mirabella,
  • Maria Grazia Grimaldi and
  • Francesco Ruffino
  • + 4 authors+ 0 author

21 July 2021

In this work, an investigation of the properties of nanoscale-thick Ti/TiN, TiN, W, WN layers as diffusion barriers between Si and Al is carried out in view of Si-based electronic applications. Heat treatments were performed on the samples to activat...

(This article belongs to the Special Issue Feature Papers of Micromachines in Materials and Processing 2021)
  • Feature Paper
  • Article
  • Open Access
8 Citations
4,182 Views
16 Pages

Influence of Isothermal Annealing on Microstructure, Morphology and Oxidation Behavior of AlTiSiN/TiSiN Nanocomposite Coatings

  • Patrik Šulhánek,
  • Libor Ďuriška,
  • Marián Palcut,
  • Paulína Babincová and ,
  • Martin Sahul,
  • Ľubomír Čaplovič,
  • Martin Kusý,
  • Ľubomír Orovčík,
  • Štefan Nagy and
  • Ivona Černičková
  • + 7 authors+ 2 authors

24 January 2023

The present work investigates the influence of isothermal annealing on the microstructure and oxidation behavior of nanocomposite coatings. AlTiSiN/TiSiN coatings with TiSiN adhesive layer were deposited onto a high-speed steel substrate via physical...

(This article belongs to the Special Issue Nano-Structured Thin Films: Growth, Characteristics, and Application)
  • Article
  • Open Access
19 Citations
3,967 Views
18 Pages

28 June 2020

The high potential of the protective coatings for metal machining applications using the physical vapor deposition (PVD) processes is one to be valued, and will accelerate development of the multicomponent coating design and increase the cutting effi...

(This article belongs to the Special Issue Multicomponent and Nanocomposite Hard Coatings: Coating Technologies, Properties and Applications)

of 24