13,750 Results Found

Hybrid breeding in sunflowers based on CMS PET1 requires development of restorer lines carrying, in most cases, the restorer gene Rf1. Markers for marker-assisted selection have been developed, but there is still need for closer, more versatile, and...

The PET2-cytoplasm represents a well characterized new source of cytoplasmic male sterility (CMS) in sunflower. It is distinct from the PET1-cytoplasm, used worldwide for commercial hybrid breeding, although it was, as PET1, derived from an interspec...

Grain sorghum (Sorghum bicolor (L.) Moench) is one of the major crops used for various purposes, including animal and human nutrition. The most relevant strategy for creating new sorghum hybrids is the use of lines with cytoplasmic male sterility (CM...

Single nucleotide polymorphisms (SNPs) were significantly associated with fertility restoration of cytoplasmic male sterility (CMS) PET1 by the restorer gene Rf1. For these SNPs, four Kompetitive allele-specific PCR (KASP) markers were successfully d...

Radio frequency (RF) based wireless power transfer provides an attractive solution to extend the lifetime of power-constrained wireless sensor networks. Through harvesting RF energy from surrounding environments or dedicated energy sources, low-power...

In this paper, a dual-band wide-input-range adaptive radio frequency-to-direct current (RF–DC) converter operating in the 0.9 GHz and 2.4 GHz bands is proposed for ambient RF energy harvesting. The proposed dual-band RF–DC converter adopts a dual-ban...

The scope of this work is to propose a distributed RF sensing architecture that interconnects and utilizes a cyber security operations center (SOC) to support long-term RF threat monitoring, alerting, and further centralized processing. For the purpo...

The muscle-specific ubiquitin ligase MuRF1 regulates muscle catabolism during chronic wasting states, although its roles in general metabolism are less-studied. Here, we metabolically profiled MuRF1-deficient knockout mice. We also included knockout...

Microelectromechanical systems (MEMS) that are based on flexible substrates are widely used in flexible, reconfigurable radio frequency (RF) systems, such as RF MEMS switches, phase shifters, reconfigurable antennas, phased array antennas and resonat...

Eukaryotic release factor eRF1, encoded by the ETF1 gene, recognizes stop codons and induces peptide release during translation termination. ETF1 produces several different transcripts as a result of alternative splicing, from which two eRF1 isoforms...

There has been an explosion in research focused on Internet of Things (IoT) devices in recent years, with a broad range of use cases in different domains ranging from industrial automation to business analytics. Being battery-powered, these small dev...

In IoT networks, authentication of nodes is primordial and RF fingerprinting is one of the candidates as a non-cryptographic method. RF fingerprinting is a physical-layer security method consisting of authenticated wireless devices using their compon...

The establishment of the mid-infrared and terahertz free-electron laser (MIR/THz FEL) facility is ongoing at the PBP-CMU Electron Linac Laboratory (PCELL) in Chiang Mai University. The facility utilizes an S-band radio-frequency (RF) gun and a linear...

Ambient RF energy harvesting (RF-EH) is a particular case of wireless power transfer (WPT), which is characterized by ultra-low power operation. This work points out theoretical and practical aspects that should be considered in the design of RF rect...

The miniaturization and low power consumption characteristics of RF MEMS (Radio Frequency Microelectromechanical System) switches provide new possibilities for the development of microsatellites and nanosatellites, which will play an increasingly imp...

In the rapidly advancing digital era, the demand for miniaturized and high-performance electronic devices is increasing, particularly in applications such as wireless communication, unmanned aerial vehicles, and healthcare devices. Radio-frequency mi...

Background: Raffinose synthase (RFS) plays a crucial role in plant growth and development, as well as in responses to biotic and abiotic stresses. However, its functions in Brassica napus remain poorly understood. Methods: To investigate the characte...

This study is a further development of our “Proposal of a new double-nozzle technique for in-gas-jet laser resonance ionization spectroscopy” paper published in the journal Atoms earlier this year. Here, we propose equipping the double-no...

For low input radio frequency (RF) power from −35 to 5 dBm, a novel quad-band RF energy harvester (RFEH) with an improved impedance matching network (IMN) is proposed to overcome the poor conversion efficiency and limited RF power range of the...

Cotton is an important natural fiber crop. The RF2 gene family is a member of the bZIP transcription factor superfamily, which plays an important role in plant resistance to environmental stresses. In this paper, the RF2 gene family of four cotton sp...

In this work, a Radio Frequency (RF) Energy Harvester comprised of a differential Radio Frequency-to-Direct Current (RF-DC) converter realized in ST130 nm Complementary Metal-Oxide-Semiconductor (CMOS) technology and a customized broadband Printed Ci...

An ultralow-power ultrawideband (UWB) transmitter with an energy-efficient injection-locked radio frequency (RF) clock harvester that generates a carrier from an RF signal is proposed for RF energy-harvesting Internet-of-Things (IoT) sensor applicati...

This paper presents a reconfigurable hybrid Radio Frequency (RF) rectifier designed to efficiently convert AC RF power to DC voltages for an energy harvesting system. The proposed reconfigurable rectifier adopts the advantage of low conduction loss i...

A triple-band single-layer rectenna for outdoor RF energy applications is introduced in this paper. The proposed rectenna operates in the frequency bands of LoRa, GSM-1800, and UMTS-2100 networks. To obtain a triple-band operation, a modified E-shape...

This paper presents a 5.8 GHz RF–DC converter for high conversion efficiency and high output voltage based on a common-ground and multiple–stack structure. An RF isolation network (RFIN) for the multiple-stack RF–DC converter is pro...

In this paper, we investigate the enhancement of RF–RF energy harvesting efficiency (e_rf–rf) in multipath environments in the context of wireless power transfer (WPT). For this, we used a retrodirective transmitting (Tx) antenna array res...

The subject of this publication is a synthesized description of an S-parameter linear analysis for the improvement of a particular RF amplifier. The model is applied in a simulation environment as a 100–500 MHz two-port device under test with c...

The ongoing arms race between viruses and their hosts is constantly evolving. One of the ways in which cells defend themselves against invading viruses is by using restriction factors (RFs), which are cell-intrinsic antiviral mechanisms that block vi...

The E3 ubiquitin ligase MuRF1/TRIM63 was identified 20 years ago and suspected to play important roles during skeletal muscle atrophy. Since then, numerous studies have been conducted to decipher the roles, molecular mechanisms and regulation of this...

Within an increasingly connected world, the exponential growth in the deployment of Internet of Things (IoT) applications presents a significant challenge in power and data transfer optimisation. Currently, the maximization of Radio Frequency (RF) sy...

The global demand for radio frequency (RF) modules and components has grown exponentially in recent decades. RF switches are the essential unit in RF front-end and reconfigurable systems leading to the rapid development of novel and advanced switch t...

The RFEH design challenges can be broadly classified into overall radio frequency direct current (RF-to-DC) power conversion efficiency (PCE), form factor, operational bandwidth (BW), and compactness. A detailed overview of the essential components o...

With the globalization of the integrated circuit (IC) design flow of chip fabrication, intellectual property (IP) piracy is becoming the main security threat. While most of the protection methods are dedicated for digital circuits, we are trying to p...

The evolving role of modern navies has required increasingly higher levels of capability in the Radio Frequency (RF) shipboard systems that provide radar, communications, Electronic Attack (EA) and Electronic Support (ES) functions. The result has be...

Radio Frequency (RF) energy harvesting has been emerged as a potentially reliable method to replace the costly and difficult to maintain source of low-power wireless sensor networks. A plethora of dual-band rectifier designs has been proposed in the...

This paper presents a critical analysis of image-based 3D reconstruction using neural radiance fields (NeRFs), with a focus on quantitative comparisons with respect to traditional photogrammetry. The aim is, therefore, to objectively evaluate the str...

MuRF1 [muscle RING (Really Interesting New Gene)-finger protein-1] is an ubiquitin-protein ligase (E3), which encode by TRIM63 (tripartite motif containing 63) gene, playing a crucial role in regulating cardiac muscle size and function through ubiqui...

The feasibility and the development of a four-port elliptical birdcage radio frequency (RF) coil for generating a homogenous RF magnetic (B₁) field is presented for a space-constrained narrow-bore magnetic resonance imaging (MRI) system. Optimization...

In an increasingly wireless world, spatiotemporal monitoring of the exposure to environmental radiofrequency (RF) electromagnetic fields (EMF) is crucial to appease public uncertainty and anxiety about RF-EMF. However, although the advent of smart ci...

In recent years, Simultaneous Localization and Mapping (SLAM) systems have shown significant performance, accuracy, and efficiency gains, especially when Neural Radiance Fields (NeRFs) are implemented. NeRF-based SLAM in mapping aims to implicitly un...

The advent of the Internet of Things (IoT) has contributed to an increase in the production volume of RF-featured equipment. According to statistics from the literature, the IoT industry will soon deploy billions of products. While the concept behind...

This paper presents the design and implementation of two front-ends for RF (Radio Frequency) energy harvesting, comparing them with the commercial one—P2110 by Powercast Co. (Pittsburgh, PA, USA) Both devices are implemented on a discrete eleme...

Epithelial ovarian cancer (EOC) remains a highly-lethal gynecological malignancy, characterized by frequent recurrence, chemotherapy resistance and poor 5-year survival. Identifying novel predictive molecular markers remains an overdue challenge in t...

The operation of SPIDER (Source for the Production of Ions of Deuterium Extracted from Radio-frequency plasma), full-scale prototype of ITER NBI (Neutral Beam Injector) radio-frequency ion source, pointed out deleterious effects caused by stray Radio...

Dielectric resonance effects and radio-frequency (RF) power deposition have become challenging issues for magnetic resonance imaging at ultrahigh-field (UHF) strengths. The use of transmit (Tx) coil arrays with independently-driven RF sources using a...

This paper presents a metamaterial (MTM)-integrated high-gain rectenna for RF sensing and energy harvesting applications that operates at 2.45 GHz, an industry, science, medicine (ISM) band. The novel MTM superstrate approach with a three-layered int...

In clinical conditions such as diaphragm paralysis or mechanical ventilation, disuse-induced diaphragmatic dysfunction (DIDD) is a condition that poses a threat to life. MuRF1 is a key E3-ligase involved in regulating skeletal muscle mass, function,...

The hybrid visible light communication/radio frequency (VLC/RF) transmission system could offer consistent coverage and high throughput, which are inherited from the VLC and RF link components separately. However, almost all current hybrid VLC/RF sch...

In this paper, we illustrate the RF design and measurements of a C-band prototype structure for an Ultra High Dose Rate medical linac. (1) Background: FLASH Radiotherapy (RT) is a revolutionary new technique for cancer cure. It releases ultra-high ra...

The orthogonal time-frequency space (OTFS) waveform exceeds the challenges that face orthogonal frequency division multiplexing (OFDM) in a high-mobility environment with high time-frequency dispersive channels. Since radio frequency (RF) impairments...