Over the past several decades, the number of electric vehicles (EVs) has continued to increase. Projections estimate that worldwide, more than 125 million EVs will be on the road by 2030. At the heart of these advanced vehicles is the lithium-ion (Li...
Lithium iron phosphate (LiFePO4 or LFP) is a promising cathode material for lithium-ion batteries (LIBs), but side reactions between the electrolyte and the LFP electrode can degrade battery performance. This study introduces an innovative coating st...
TiO2 represents one of the promising anode materials for lithium ion batteries due to its high thermal and chemical stability, relatively high theoretical specific capacity and low cost. However, the electrochemical performance, particularly for meso...
The paper describes the digital twin of a Li-ion battery cell based on the MATLAB/Simulink generic model. The digital twin is based on measured data for constant current/constant voltage charging and discharging cycles with State of Health (SoH) up t...
The development of lithium-ion batteries largely relies on the cathode and anode materials. In particular, the optimization of cathode materials plays an extremely important role in improving the performance of lithium-ion batteries, such as specific...
Battery state of charge prediction is one of the most essential state quantities of a battery management system. It is a prerequisite for the operation of a battery management system, but it becomes difficult to make an exact prediction of its state...
Accurate modeling of the nonlinear relationship between the open circuit voltage (OCV) and the state of charge (SOC) is required for adaptive SOC estimation during the lithium-ion (Li-ion) battery operation. Online SOC estimation should meet several...
Pulse charging of lithium-ion polymer batteries (LiPo), when properly implemented, offers increased battery charge and energy efficiencies and improved safety for electronic device consumers. Investigations of the combined impact of pulse charge duty...
This article presents an isolated microgrid which combines two renewable power generators: a Hydraulic-Turbine-Generator (HTG) and a Wind-Turbine-Generator (WTG) with a Li-ion battery-energy-storage (BES). Depending on the generator(s) which supply a...
Among all advanced anode materials, graphite is regarded as leading and still-unrivaled. However, in the modern world, graphite-based anodes cannot fully satisfy the customers because of its insufficient value of specific capacity. Other limitations...
Traditional hierarchical control of the microgrid does not consider the energy storage status of a distributed hybrid energy storage system. This leads to the inconsistency of the remaining capacity of the energy storage system in the process of syst...
Li-ion batteries are the key enabling technology in portable electronics applications, and such batteries are also getting a foothold in mobile platforms and stationary energy storage technologies recently. To accelerate the penetration of Li-ion bat...
The lithium-ion (Li-ion) battery is a promising energy storage technology for electronics, automobiles, and smart grids. Extensive research was conducted in the past to improve the prediction of the remaining capacity of the Li-ion battery. A robust...
Rechargeable batteries are attractive power storage equipment for a broad diversity of applications. Lithium-ion (Li-ion) batteries are widely used the superior rechargeable battery in portable electronics. The increasing needs in portable electronic...
The growing need for lithium-ion batteries, fueled by the widespread use of electric vehicles (EVs) and portable electronic devices, requires high energy density and safety. The cathode material Li1-x(NiyCozMn1-y-z)O2 (NCM) shows promise, but attaini...
With the use of Li-ion batteries, Li-ion batteries will experience unavoidable aging, which can cause battery safety issues, performance degradation, and inaccurate SOC estimation, so it is necessary to predict the state of health (SOH) of Li-ion bat...
With the increasing proportion of Li-ion batteries in energy structures, studies on the estimation of the state of charge (SOC) of Li-ion batteries, which can effectively ensure the safety and stability of Li-ion batteries, have gained much attention...
Lithium ion (Li-ion) batteries have been widely used in various kinds of applications, including consumer electronics, green energy systems and electrical vehicles. Since the charging method has a significant influence on the performance and lifetime...
Renewable energy (RE) utilization is expected to increase in the coming years due to its decreasing costs and the mounting socio-political pressure to decarbonize the world’s energy systems. On the other hand, lithium-ion (Li-ion) batteries are...
Advanced electrochemical batteries are becoming an integral part of a wide range of applications from household and commercial to smart grid, transportation, and aerospace applications. Among different battery technologies, lithium-ion (Li-ion) batte...
The presence of highly electronegative atoms in Li-ion batteries anticipates the formation of σ-hole regions that may strongly affect the ionic conductivity. The σ-hole consists of a region of positive electrostatic potential extending in the directi...
Energy storage system (ESS) technology is still the logjam for the electric vehicle (EV) industry. Lithium-ion (Li-ion) batteries have attracted considerable attention in the EV industry owing to their high energy density, lifespan, nominal voltage,...
The coupling of solar cells and Li-ion batteries is an efficient method of energy storage, but solar power suffers from the disadvantages of randomness, intermittency and fluctuation, which cause the low conversion efficiency from solar energy into e...
The flammability and volatility of conventional lithium hexafluorophosphate (LiPF6)-based electrolytes with organic carbonate solvents remain critical issues to the safety and thermal stability of lithium-ion batteries (LIBs). This study investigates...
The rapidly growing Li-ion battery market has generated considerable demand for Li-ion batteries with improved performance and stability. All-solid-state Li-ion batteries offer promising safety and manufacturing enhancements. Herein, we examine the e...
There is a growing interest in finding a suitable electrolyte material for the construction of rechargeable Li-ion batteries. Li2NiGe3O8 is a material of interest with modest Li-ionic conductivity. The atomistic simulation technique was applied to un...
Energy supply on high mountains remains an open issue since grid connection is not feasible. In the past, diesel generators with lead–acid battery energy storage systems (ESSs) were applied in most cases. Recently, photovoltaic (PV) systems with lith...
LiNi0.80Co0.15Al0.05O2 (NCA) as a lithium ion battery cathode material has received attention for its highly specific capacity and excellent low temperature performance. However, the disadvantages of its high surface lithium compound residues and hig...
In this study, the lithium-ion (Li-ion) battery type, which has a high-power density and utilizes lithium as the primary conductive terminal, has been employed. Within the scope of this research, a one-dimensional isothermal Li-ion battery model has...
Polymer electrolytes, a type of electrolyte used in lithium-ion batteries, combine polymers and ionic salts. Their integration into lithium-ion batteries has resulted in significant advancements in battery technology, including improved safety, incre...
To improve the safety of lithium ion batteries, a multi-component (MC) additive (consisting of vinylene carbonate (VC), 1,3-propylene sulfite (PS) and dimethylacetamide (DMAC)) is used in the baseline electrolyte (1.0 M LiPF6/ethylene carbonate (EC)...
Co-free Li-rich oxide shows promise as a cathode for low-cost high-energy density Li-ion batteries but presents poor cyclic stability. To address this issue, a novel CeO2-coated Li-rich oxide composite is developed by applying a layer of CeO2 onto Co...
Lithium-ion (Li-ion) batteries have been competitive in Electric Vehicles (EVs) due to their high energy density and long lifetime. However, there are still issues, which have to be solved, related to the fast-charging capability of EVs. The pulsed c...
The significance of reliable energy storage systems in spacecraft applications cannot be overstated, since they play a vital role in ensuring continuous power supply and prolonged mission durations. This research deals with the modeling of a hybrid m...
Spinel LiMn2O4 is an appealing candidate cathode material for Li-ion rechargeable batteries, but it suffers from severe capacity fading, especially at higher temperature (55 °C) during discharging/charging. In recent years, many attempts have been ma...
In this work, dimethoxyethane (DME) and 1,3-dioxolane (DOL) are studied as the co-solvent of an advanced electrolyte for fast charging of Li-ion batteries by using lithium bis(fluorosulfonyl)imide (LiFSI) as a salt and fluorinated ethylene carbonate...
The electric vehicle and energy storage markets have grown rapidly in recent years. Thermal runaway caused by malfunctioning Li-ion batteries is an urgent issue with many causes (e.g., mechanical, electrical, and thermal abuse). The most common cause...
Li-ion batteries are at risk of explosions caused by fires, primarily because of the high energy density of Li ions, which raises the temperature. Battery cases are typically made of plastic, aluminum, or SAF30400. Although plastic and aluminum aid w...
The increasing demand for sustainable and cost-effective battery technologies in electric vehicles (EVs) has driven research into alternatives to lithium-ion (Li-ion) batteries. This study investigates magnesium-ion (Mg-ion) batteries as a potential...
Micro- and nano-structured electrodes have the potential to improve the performance of Li-ion batteries by increasing the surface area of the electrode and reducing the diffusion distance required by the charged carriers. We report the numerical simu...
The current literature highlights several state-of-health (SOH) prediction models for lithium-ion (Li-ion) batteries used in electric vehicles (EVs). However, a thorough comparative analysis remains absent. This study addresses this gap by conducting...
As the world moves toward greenhouse gas reduction, there is increasingly active work around Li-ion chemistry-based batteries as an energy source for electric vehicles (EVs), hybrid electric vehicles (HEVs) and smart grids. In these applications, the...
Electric vehicle (EV) markets have evolved. In this regard, rechargeable batteries such as lithium-ion (Li-ion) batteries become critical in EV applications. However, the nonlinear features of Li-ion batteries make their performance over their lifeti...
In the recent years, lithium-ion batteries have prevailed and dominated as the primary power sources for mobile electronic applications. Equally, their use in electric resources of transportation and other high-level applications is hindered to some...
The design of an optimized thermal management system for Li-ion batteries has challenges because of their stringent operating temperature limit and thermal runaway, which may lead to an explosion. In this paper, an optimized cooling system is propose...
Batteries are a key technology of the 21st century and even of the 20th century. The success of mobile communication devices, as cellular phones, tablet computers, digital still cameras, and laptop computers was strongly supported by the improvements...
Polymer binders are critical auxiliary additives to Li-ion batteries that provide adhesion and cohesion for electrodes to maintain conductive networks upon charge/discharge processes. Therefore, polymer binders become interconnected electrode structu...
The demand for batteries for energy storage is growing with the rapid increase in photovoltaics (PV) and wind energy installation as well as electric vehicle (EV), hybrid electric vehicle (HEV) and plug-in hybrid electric vehicle (PHEV). Electrochemi...
Large cations such as potassium ion (K+) and sodium ion (Na+) could be introduced into the lithium-ion (Li-ion) battery system during material synthesis or battery assembly. However, the effect of these cations on charge storage or electrochemical pe...
Among the wide diversity of existing technologically mature batteries, lithium-ion (Li-ion) batteries have become popular because of their longevity, high energy density, high efficiency and lack of memory effect. Differential charging of cells with...
of 18