In view of the depletion of high-grade magnesite resources in China, this study presents a comparative analysis of two industrial fused magnesia products produced via a flotation–fusion route. A low-grade magnesite (DSQLM-3, MgO 41.48 wt.%) was...
To explore the feasibility of hot metal desulfurization using red mud, the sulfur distribution ratio (LS) between CaO-SiO2-Al2O3-Na2O-TiO2 slag and carbon-saturated iron is evaluated in this paper. First, the theoretical liquid areas of the CaO-SiO2-...
Titanium-extracted tailing is a by-product generated during titanium-bearing blast furnace slag treatment process. The crystallization behavior of the titanium-extracted tailing during the cooling process is significant to its utilization for glass c...
With the raw materials for ironmaking becoming increasingly complex, more accurate phase equilibrium information on the slag is needed to refine the blast furnace operation to reduce the energy cost and CO2 emissions. CaO-SiO2-Al2O3-MgO is a basic sy...
Large-scale reuse of copper tailings can mitigate environmental hazards and recover strategic elements; this work investigates the feasibility of producing foam glass-ceramics with high copper-tailing content (>70 wt%) by tuning the CaO/SiO2 ratio...
In this experimental study, tests were conducted to obtain the CaO/SiO2 (C/S) molar ratio that minimizes the micropores of hardened concrete. To this end, the compressive strength, thermogravimetric analysis (TGA), and microporous structure of harden...
In this paper, the CaO-SiO2-FetO-P2O5 dephosphorization slag system during the premier and middle stage of the converter process was studied, the effect of slag composition on the distribution ratio and activity coefficient of P in the n·2CaO&...
During the casting of high aluminum steel, the dramatic increase in the Al2O3/SiO2 ratio is inevitable, resulting in significant changes of the crystallization behavior, which would result in heat transfer and lubrication problems. Crystallization pr...
Alkaline earth metal oxide (MgO, CaO, SrO) catalysts supported on BEA zeolite were prepared by a wet impregnation method and tested in the transesterification reaction of rapeseed oil with methanol towards the formation of biodiesel (FAMEs—fatt...
Silicon is an essential material for metallurgical and energy applications, yet its conventional carbothermic production is associated with high CO2 emissions. The SisAl process offers a low-emission alternative based on the reduction of SiO2 using a...
To better understand the pozzolanic activity in fly ash used as a supplementary cementitious material in cement or concrete, calcium silicate hydrate (C-S-H) has been synthesized by adding silica fume to a supersaturated calcium hydroxide solution pr...
Calcium-silicate-based ceramic composites with different CaO/SiO2 weight ratios (10/90, 20/80, 30/70, 40/60, 50/50, 60/40, 70/30, 80/20, and 90/10) have been prepared from chicken eggshells and silica gel using attrition milling for 3 h in wet condit...
In this work, a poly(L-lactide-co-glycolide) (PLGA)-based composite was enriched with one of the following sol-gel bioactive glasses (SBG) at 50 wt.%: A1—40 mol% SiO2, 60 mol% CaO, CaO/SiO2 ratio of 1.50; S1—80 mol% SiO2, 20 mol% CaO, CaO...
In this work, the characteristic temperatures (solidus and liquidus) of selected lead blast furnace slags were investigated using in situ high-temperature optical microscopy. The effects of the basicity of the slag (CaO/SiO2), the Fe/SiO2 ratio, and...
For optimizing the operational efficiency and productivity within blast furnace processes, a profound understanding of the viscous flow characteristics of CaO–SiO2–MgO–Al2O3–B2O3 slag systems is of paramount importance. In thi...
With the consumption of high-quality iron ore resources, the grade of iron ore raw used in the iron making process has gradually decreased. The high aluminum raw materials has led to an increase in the Al2O3 content in the blast furnace slag, which h...
In this paper, the thermodynamic properties of the PbO-ZnO-FeO-Fe2O3-SiO2-CaO six-component slag system were studied by using the molecular-ion coexistence theory, and the influence of slag composition changes on the activity of each structural unit...
This study was carried out to identify the conditions of formation of calcium sulphoaluminate (3CaO·3Al2O3·CaSO4) by the sintering of a limestone (CaCO3) and alunite [K2SO4·Al2(SO4)3·4Al(OH)3] mixture with the following reagents: K2SO4, CaCO3, Al(OH)...
A technology for the hydrochemical processing of the kaolinite fraction of bauxite has been developed, and it involves preliminary chemical activation in a sodium bicarbonate solution and alkaline leaching in a recycled high-modulus solution with the...
This study investigated the effect of the CaO/SiO2 mass ratio of steel slag on the corrosion behavior of spinel-forming alumina-based castables with a content of MgO (3–7 wt.%). Equiweight mixtures of castables and slags were calculated by Fact...
In this study, the possibility of using cement bypass dust as a cement additive was investigated. The utilization of cement bypass dust remains a major problem in cement production, as huge amounts of it are stored in landfills. In this study, a hydr...
The fluorine in traditional mold fluxes could be harmful in steel-plant environments. Accordingly, fluoride-free mold fluxes have received great attention in recent years. In this work, a method to adjust the crystallization and radiative heat transf...
Separating P2O5 from steelmaking slag is the key to achieving optimum resource utilization of slag. If the P-concentrating 2CaO∙SiO2–3CaO∙P2O5 solid solution was effectively separated, it can be a potential phosphate resource and the remaining slag r...
Solid catalysts are the best choice for an effective large-scale biodiesel production process. This study aimed to analyze the characteristics of catalysts due to the influence of variations in sintering temperature and binder composition on heteroge...
Magnesia is one of the vital and extensively used refractory components. In this study, the dissolution of magnesia is investigated at 1450, 1500, and 1550 °C in three silicate slags in the CaO–Al2O3–SiO2–MgO system using high-t...
Conventional CaO–SiO2-based mold fluxes used in the continuous casting of rare-earth weathering steel are prone to severe slag–steel interfacial reactions, resulting in marked compositional changes and progressive property deterioration a...
C-A-S-H (CaO-Al2O3-SiO2-H2O) and N-A-S-H (Na2O-Al2O3-SiO2-H2O) have a wide range of chemical compositions and structures and are difficult to separate from alkali-activated materials. Therefore, it is difficult to analyze their microscopic properties...
Foundry slag has different characteristics from blast furnace slag, such as its high SiO2 content and low basicity (CaO/SiO2 < 1), which prevent it from being used as a cementitious component. Lime slurry is a waste product with a high CaO content...
The dissolution of Al2O3 non-metallic inclusions in slag containing FeO was investigated in this study. The slag system used in the experiments was a quaternary system of CaO-SiO2-Al2O3-FeO. The composition of the slag was studied by fixing the basic...
The glass phase is one of the binding phases in high-basicity sinter, which is mainly formed during a high-temperature cooling process while cannot crystallize in time. The phase still involves the “structure” information of the binding p...
A comprehensive understanding of the structural impact of composition is crucial in designing converter slag to optimize its rheological and surface properties during the smelting process. In this study, glassy CaO-SiO2-FexO samples with varying CaO/...
In this study, the structure, viscosity characteristics, and crystallization behavior of CaO-SiO2-B2O3 based melts were studied combining molecular dynamics (MD) simulation, Fourier transform infrared (FTIR) spectroscopy, rotating viscometer test, an...
In this paper, the influence of the Fe2O3 addition amount on the dephosphorization of hot metal at 1623 K with the slag of the low basicity (CaO/SiO2) of about 1.5 was investigated by using high-temperature laboratorial experiments. With increasing t...
This study examines the microspherical high-calcium fly ash (HCFA) and the high-strength binder material based on it by method of scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM-EDS). The composition of 568 individual micro...
This study aimed to investigate the possibility of using biomass fly ash as a cement additive after hydrothermal modification. The treatment of biomass fly ash involves additional milling and curing under various hydrothermal conditions. Variation of...
The CaO-SiO2-MgO-5Al2O3-30FeO five (oxide) components slag system was studied by varying the magnesium oxide (MgO) content (5.7–13.6 wt.%.% MgO) and keeping the basicity constant). The data were analyzed using the FactSage software. It was observed t...
The main measure to reduce energy losses is the usage of insulating materials. When the temperature exceeds 500 °C, silicate and ceramic products are most commonly used. In this work, high-crystallinity 1.13 nm tobermorite and xonotlite were hydr...
In this work, the thermal stability, microstructure, and catalytic activity in oxidation reactions of calcium silicate hydrates formed in the CaO-SiO2-Cr(NO3)3-H2O system under hydrothermal conditions were examined in detail. Dry primary mixture with...
In order to better understand and develop the technology of integrating dephosphorization and decarburization in a single converter (abbreviated as IDDSC), the relevant thermodynamic issues were discussed by calculation. Based on the thermodynamic ca...
In this study, CaO-SiO2-Al2O3-MgO-TiO2 slag was used as the research object to simulate the blast furnace ironmaking process. Based on the experimental data, the influences of basicity (R(w(CaO)/w(SiO2))) and the magnesia–alumina ratio (w(MgO)/...
In this study, the surface tension of molten slag was measured using the hanging ring method. Based on the ion and molecular coexistence theory (IMCT), an activity prediction model for the CaO-SiO2-MgO-Al2O3-CaF2 slag system was established, and a co...
Based on industrial production data, the distribution patterns of elements in the oxygen-enriched top-blown Isa smelting process for lead were studied. The focus was on investigating the thermodynamic effects of different slag types and oxygen-enrich...
In order to achieve the purpose of high-efficiency dephosphorization by single-slag method during the combined blown converter steelmaking process, the CaO-SiO2-FetO-MgO-MnO-P2O5 slag system was taken as the research object, and the slag-forming rout...
In this paper, a new method of basic oxygen furnace (BOF) slag component modification with a regulator was studied. The main mineral was designed as C4AF, C2S and C3S in modified BOF slag, and the batching method, mineral compositions, hydration rate...
Alkali-activated binders have become popular in the construction industry for their eco-friendly attributes. Various wastes from industries and agricultural sectors containing high concentrations of aluminosilicate and calcium oxides can be used to d...
The effect of cerium content (0, 0.011, 0.017, 0.075 wt%) on non-metallic inclusions and solidification microstructures of 55SiCr high-strength spring steel was experimentally studied, along with thermodynamic calculations. The results show that Ce a...
Spent lithium iron phosphate (LiFePO4, LFP) batteries contain considerable amounts of Fe; however, most conventional recycling processes primarily target Li recovery, while Fe is often discarded or utilized as a low-value residue. In this study, an i...
High-strength tire cord steel is mainly used in radial ply tires, but the presence of brittle Ti inclusions can cause failure of the wires and jeopardize their performance in production. In order to control the titanium content during steel productio...
Refractories exposed to corrosive melts at high temperatures experience wear due to dissolution. The presented work deals with the dynamic corrosion of magnesia fine ceramics in a CaO–Al2O3–SiO2–MgO silicate slag with a CaO/SiO2 wei...
Based on recently published research on leaching control mechanisms in electric arc furnace (EAF) slags, it is assumed that a FeO/SiO2 ratio of around one leads to low leached V and Cr concentrations. This ratio influences the mineral phase compositi...
of 10