Skip to Content

581 Results Found

  • Article
  • Open Access
15 Citations
9,893 Views
26 Pages

25 January 2023

With the raw materials for ironmaking becoming increasingly complex, more accurate phase equilibrium information on the slag is needed to refine the blast furnace operation to reduce the energy cost and CO2 emissions. CaO-SiO2-Al2O3-MgO is a basic sy...

(This article belongs to the Special Issue Fundamentals of Advanced Pyrometallurgy)
  • Article
  • Open Access
8 Citations
2,061 Views
16 Pages

3 November 2025

Ladle furnace (LF) refining is one of the most widely used secondary refining processes for producing clean steel and constitutes a key process in the steelmaking–continuous casting section. The properties of slag play a decisive role in determ...

(This article belongs to the Special Issue Applied Chemistry in Asia)
  • Article
  • Open Access
1 Citations
3,796 Views
17 Pages

Phase Equilibria Study of the MgO–CaO–SiO2 Slag System with Ferronickel Alloy, Solid Carbon, and Al2O3 Additions

  • Nandhya K. P. Prikusuma,
  • Muhammad G. Algifari,
  • Rafiandy A. Harahap,
  • Zulfiadi Zulhan and
  • Taufiq Hidayat

11 September 2024

Knowledge of the phase equilibria in the MgO–CaO–SiO2–Al2O3 slag system is crucial for the nickel laterite smelting process. The phase equilibria of this slag system were experimentally investigated, focusing on the olivine and trid...

(This article belongs to the Special Issue Phase Equilibrium in Chemical Processes: Experiments and Modeling)
  • Article
  • Open Access
10 Citations
3,650 Views
12 Pages

Prediction Model for SiO2 Activity in the CaO-Al2O3-SiO2-MgO Quaternary Slag System

  • Yue Lin,
  • Yuanrong Yi,
  • Minghang Fang,
  • Wenqing Ma and
  • Wei Liu

1 April 2023

Activity models based on the ion and molecule coexistence theory have been widely used in the refining of metallurgical slags, with the SiO2 content of slag playing a crucial role in improving the mechanical properties of refining slag-based cementit...

(This article belongs to the Section Mineral Processing and Extractive Metallurgy)
  • Article
  • Open Access
17 Citations
10,558 Views
10 Pages

12 September 2018

According to the coexistence theory of slag structure, a calculation model for the activity of FeO in the quaternary system SiO2-CaO-Al2O3-FeO of depleted copper slag was established. The model was used to calculate and analyze the effects of tempera...

(This article belongs to the Special Issue Selected Papers from 8th ICSTI 2018)
  • Article
  • Open Access
45 Citations
6,190 Views
18 Pages

Li-Distribution in Compounds of the Li2O-MgO-Al2O3-SiO2-CaO System—A First Survey

  • Thomas Schirmer,
  • Hao Qiu,
  • Haojie Li,
  • Daniel Goldmann and
  • Michael Fischlschweiger

4 December 2020

The recovery of critical elements in recycling processes of complex high-tech products is often limited when applying only mechanical separation methods. A possible route is the pyrometallurgical processing that allows transferring of important criti...

(This article belongs to the Special Issue New Science Based Concepts for Increased Efficiency in Battery Recycling 2020)
  • Article
  • Open Access
6 Citations
4,400 Views
10 Pages

Equilibrium Phase Relations for a SiO2-Al2O3-FeOx System at 1300 °C and 1400 °C in Air

  • Song Li,
  • Yuchao Qiu,
  • Junjie Shi,
  • Jianzhong Li and
  • Changsheng Liu

27 May 2022

A long-term fundamental study for the construction of the thermodynamic database of a metallurgical slag system has been proposed. In the present work, the equilibrium phase relations for the key ternary SiO2-Al2O3-FeOx system at 1300 °C and 1400...

(This article belongs to the Special Issue Thermodynamics and Kinetics in Metallurgical Processes)
  • Review
  • Open Access
21 Citations
14,711 Views
21 Pages

19 April 2023

More and larger blast furnaces have been constructed for ironmaking across the world in recent years due to the advantages of high productivity, high energy efficiency and low cost. Slag plays important role in a blast furnace to produce high-quality...

(This article belongs to the Section Extractive Metallurgy)
  • Article
  • Open Access
15 Citations
4,255 Views
20 Pages

Studying the Structure and Viscosity of MnO-SiO2-CaO-Al2O3-MgO Slag System

  • Shokouh Haghdani,
  • Merete Tangstad and
  • Kristian Etienne Einarsrud

1 August 2024

The relationship between slag structure and viscosity is studied, employing Raman spectroscopy for the five-component slag system of MnO-SiO2-CaO-Al2O3-MgO and its subsystems. This study aims to investigate the influence of variations in slag composi...

  • Article
  • Open Access
3 Citations
2,441 Views
28 Pages

19 June 2025

The paper is devoted to the plasticization mechanisms of alkali-activated cement system Na2O-CaO-Al2O3-SiO2-H2O. The fundamentals and basic factors determining the effectiveness of plasticizing surfactants for alkali-activated cement materials are di...

  • Article
  • Open Access
11 Citations
3,731 Views
14 Pages

26 May 2022

The glass phase is one of the binding phases in high-basicity sinter, which is mainly formed during a high-temperature cooling process while cannot crystallize in time. The phase still involves the “structure” information of the binding p...

(This article belongs to the Special Issue Thermodynamics and Kinetics in Metallurgical Processes)
  • Article
  • Open Access
2 Citations
2,350 Views
20 Pages

Influence of B2O3 on Reactive and Non-Reactive Wetting Behavior of CaO-SiO2-MgO-Al2O3-B2O3 System

  • Dalibor Novák,
  • Lenka Řeháčková,
  • Vlastimil Novák,
  • Dalibor Matýsek and
  • Pavlína Peikertová

19 August 2025

Boron oxide is introduced into slag as a flux, significantly lowering the liquidus temperature; however, this advantage is accompanied by several undesirable consequences. This study aims to evaluate the impact of boron oxide addition on the wetting...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
644 Views
24 Pages

Converting glucose into 5-hydroxymethylfurfural (HMF) via catalytic methods is essential for creating renewable chemicals and biofuels. Nonetheless, the process faces challenges due to by-products. This research introduces a cost-effective iron monom...

  • Communication
  • Open Access
14 Citations
3,065 Views
8 Pages

29 May 2020

The effect of electric potential on the sulfide capacity of the CaO-SiO2-Al2O3 system was evaluated by applying voltages in the range of −1.5 to 1.5 V at 1823 K in a C/CO gas equilibrium. When the cathodic potential (−1.5 to 0 V) was appl...

(This article belongs to the Special Issue Environment-Friendly Electrochemical Processes)
  • Article
  • Open Access
25 Citations
4,602 Views
11 Pages

23 July 2021

In the present study, the viscosity of the CaO–SiO2–FeO–Al2O3–MgO slag system was measured for the recovery of FeO in the electric arc furnace (EAF) process using Al dross. Considering the MgO-saturated operational condition of the EAF, the viscosity...

(This article belongs to the Special Issue Recovery and Recycling of Valuable Metals)
  • Article
  • Open Access
2 Citations
3,345 Views
10 Pages

Structure and Properties of Highly Porous Alumina-Based Ceramic Materials after Heating by Concentrated Solar Radiation

  • Vladimir G. Babashov,
  • Sultan Kh. Suleimanov,
  • Mikhail I. Daskovskii,
  • Evgeny A. Shein and
  • Yurii V. Stolyankov

30 December 2021

Three ceramic fibrous materials of the Al2O3-SiO2 system with different densities have been treated using concentrated solar radiation. The experiment was performed using technological capabilities of the Big Solar Furnace in the 2 modes: the first m...

  • Article
  • Open Access
9 Citations
4,060 Views
15 Pages

20 February 2023

To improve the yield of titanium alloy, a certain amount of TiO2 can be added to the refining slag system of Ti-bearing steel grades. With the aim of understanding the effect of TiO2 addition on the melting behaviors of CaO-SiO2-30%Al2O3-5%MgO refini...

(This article belongs to the Section Extractive Metallurgy)
  • Article
  • Open Access
5 Citations
5,186 Views
22 Pages

2 February 2019

The catalytic performances of Ru–Pt/SiO2–Al2O3 catalysts synthetized by three methods (co-impregnation (CI), successive impregnations (SI) and redox deposition (CR)) were compared for their sorbitol transformation to hexane under hydrothe...

(This article belongs to the Section Catalytic Materials)
  • Article
  • Open Access
36 Citations
5,654 Views
13 Pages

8 September 2020

To evaluate the crystallization behavior of Ti-bearing blast furnace slag-based glass ceramics, SiO2-Al2O3-CaO-MgO-TiO2 systems with various TiO2 were investigated. The crystallization process and mechanical properties were analyzed. The results show...

(This article belongs to the Special Issue Metallurgical Slag)
  • Review
  • Open Access
8 Citations
3,366 Views
20 Pages

27 February 2024

Pyrometallurgy is the primary technique for the production of many nonferrous metals such as copper, lead, and zinc. The phase equilibrium information of smelting slags plays an important role in the efficient extraction of metals and energy consumpt...

  • Article
  • Open Access
14 Citations
2,757 Views
24 Pages

Biodiesel Production by Methanolysis of Rapeseed Oil—Influence of SiO2/Al2O3 Ratio in BEA Zeolite Structure on Physicochemical and Catalytic Properties of Zeolite Systems with Alkaline Earth Oxides (MgO, CaO, SrO)

  • Łukasz Szkudlarek,
  • Karolina Chałupka-Śpiewak,
  • Waldemar Maniukiewicz,
  • Magdalena Nowosielska and ,
  • Małgorzata Iwona Szynkowska-Jóźwik and
  • Paweł Mierczyński
  • + 1 author+ 0 author

Alkaline earth metal oxide (MgO, CaO, SrO) catalysts supported on BEA zeolite were prepared by a wet impregnation method and tested in the transesterification reaction of rapeseed oil with methanol towards the formation of biodiesel (FAMEs—fatt...

(This article belongs to the Section Physical Chemistry and Chemical Physics)
  • Article
  • Open Access
20 Citations
6,037 Views
9 Pages

Oxidation Behavior and Mechanism of Al4SiC4 in MgO-C-Al4SiC4 System

  • Huabai Yao,
  • Xinming Xing,
  • Enhui Wang,
  • Bin Li and ,
  • Junhong Chen,
  • Jialin Sun and
  • Xinmei Hou
  • + 2 authors+ 0 author

Al4SiC4 powder with high purity was synthesized using the powder mixture of aluminum (Al), silicon (Si), and carbon (C) at 1800 °C in argon. Their oxidation behavior and mechanism in a MgO-C-Al4SiC4 system was investigated at 1400–1600 °C. XRD, SEM,...

(This article belongs to the Special Issue Ultrahigh Temperature Ceramic Coatings and Composites)
  • Article
  • Open Access
7 Citations
2,616 Views
22 Pages

Effects of Varying Volume Fractions of SiO2 and Al2O3 on the Performance of Concentrated Photovoltaic System

  • Muhammad Asim,
  • Muhammad Hanzla Tahir,
  • Ammara Kanwal,
  • Fahid Riaz and ,
  • Muhammad Amjad,
  • Aamna Khalid,
  • Muhammad Mujtaba Abbas,
  • Ashfaq Ahmad and
  • Mohammad Abul Kalam
  • + 4 authors+ 0 author

17 May 2023

Highly concentrated triple-junction solar cells (HCTJSCs) are cells that have diverse applications for power generation. Their electrical efficiency is almost 45%, which may be increased to 50% by the end of the year 2030. Despite their overwhelming...

  • Article
  • Open Access
3 Citations
3,568 Views
10 Pages

17 April 2023

The viscosity and conductivity of the smelting slag of copper oxide concentrate are important for reducing the operating temperature. In this study, seven slag samples were prepared by the reductive smelting of copper oxide concentrate with different...

(This article belongs to the Special Issue Comprehensive Utilization of Metallurgical Resources and Environmental Protection)
  • Article
  • Open Access
26 Citations
5,599 Views
15 Pages

Effect of Gold Nanoparticles on the Crystallization and Optical Properties of Glass in ZnO-MgO-Al2O3-SiO2 System

  • Georgiy Shakhgildyan,
  • Veniamin Durymanov,
  • Mariam Ziyatdinova,
  • Grigoriy Atroshchenko and ,
  • Nikita Golubev,
  • Alexey Trifonov,
  • Olga Chereuta,
  • Leon Avakyan,
  • Lusegen Bugaev and
  • Vladimir Sigaev
  • + 5 authors+ 0 author

18 February 2022

Gold nanoparticles precipitated in transparent glass-ceramics could pave the way for the development of multifunctional materials that are in demand in modern photonics and optics. In this work, we explored the effect of gold nanoparticles on the cry...

(This article belongs to the Special Issue Mineralogical Crystallography (2nd Edition))
  • Article
  • Open Access
2 Citations
2,559 Views
19 Pages

27 September 2023

The aim of this experiment was to determine the effect of the addition of strontium oxide on the recrystallization of zirconium silicate when adding strontium oxide to the glaze composition. Zirconia glazes (four different contents) were prepared, to...

(This article belongs to the Topic Multi-Process and Interdisciplinary Approaches in Modern Coating and Surface Design)
  • Article
  • Open Access
15 Citations
2,729 Views
21 Pages

13 December 2023

Due to the increasing demand for electromobility, the recovery of technologically relevant elements from spent Li-ion batteries is becoming increasingly important. Pyrometallurgical processing can deal with a broad range of input materials. Unfortuna...

  • Article
  • Open Access
5 Citations
2,344 Views
10 Pages

Magnetic Damping and Dzyaloshinskii–Moriya Interactions in Pt/Co2FeAl/MgO Systems Grown on Si and MgO Substrates

  • Nabil Challab,
  • Yves Roussigné,
  • Salim Mourad Chérif,
  • Mihai Gabor and
  • Mohamed Belmeguenai

7 February 2023

Spin-pumping-induced damping and interfacial Dzyaloshinskii–Moriya interaction (iDMI) have been studied in Pt/Co2FeAl/MgO systems grown on Si or MgO substrates as a function of Pt and Co2FeAl (CFA) thicknesses. For this, we combined vibrating s...

(This article belongs to the Special Issue Experimental Characterization and Numerical Modelling of Damping Capacity for Classical and Innovative Materials)
  • Article
  • Open Access
13 Citations
2,929 Views
19 Pages

29 July 2022

Al2O3 is a gangue component in iron ores, significantly influencing the formation and crystallization of calcium ferrite in the sintering process. But the mechanism of the Al2O3 effect on the crystallization of calcium ferrite is rarely reported. In...

(This article belongs to the Special Issue Advances in Dielectric Ceramics and Their Applications)
  • Article
  • Open Access
667 Views
11 Pages

13 February 2026

In this study, CaO-SiO2-Al2O3-MgO-TiO2 slag was used as the research object to simulate the blast furnace ironmaking process. Based on the experimental data, the influences of basicity (R(w(CaO)/w(SiO2))) and the magnesia–alumina ratio (w(MgO)/...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
31 Citations
9,597 Views
10 Pages

Effect of FeO Content on Foaming and Viscosity Properties in FeO-CaO-SiO2-MgO-Al2O3 Slag System

  • Wei-Ti Chang,
  • Chi-Ming Lin,
  • Yu-Lang Su,
  • Chia-Chun Li and ,
  • Yu-En Chang,
  • Jyun-Ming Shen and
  • Weite Wu
  • + 2 authors+ 0 author

7 February 2021

The foaming process is an important part of the electric arc furnace (EAF) steelmaking process. It can promote thermal efficiency and reduce refractory consumption. FeO is a key material used during the foaming process. Unlike with other components u...

  • Article
  • Open Access
25 Citations
9,801 Views
12 Pages

10 February 2019

The silico-ferrite of calcium and aluminum (SFCA) is a significant crystalline phase that bonds in high basicity sinter. Al2O3 and SiO2 play an important role in the formation of SFCA in the Fe2O3–CaO–SiO2–Al2O3 system, but the effe...

(This article belongs to the Special Issue Mineralogy of Iron Ore Sinters)
  • Article
  • Open Access
15 Citations
4,303 Views
16 Pages

Liquid Regions of Lanthanum-Bearing Aluminosilicates

  • Yandong Li,
  • Tongsheng Zhang,
  • Yefeng Feng,
  • Chengjun Liu and
  • Maofa Jiang

17 January 2020

The Al2O3-SiO2, La2O3-Al2O3, and La2O3-SiO2 binary phase diagrams were estimated by Redlich–Kister expression. La4.67Si3O13 (=La4.67(SiO4)3O) was introduced to improve the existing phase diagrams. The Al2O3-SiO2-La2O3 ternary phase diagram extrapolat...

(This article belongs to the Special Issue Rare Earth Oxides and Their Applications)
  • Article
  • Open Access
2 Citations
1,449 Views
13 Pages

Influences of SiO2 Additions on the Structures and Thermal Properties of AlTaO4 Ceramics as EBC Materials

  • Bingyan Wu,
  • Luyang Zhang,
  • Lin Chen,
  • Jiankun Wang and ,
  • Zipeng Gao and
  • Jing Feng
  • + 1 author+ 0 author

13 October 2025

Ceramic matrix composites (CMCs) are extensively utilized in aero engines due to their high-temperature stability; however, they are prone to environmental corrosion at high temperatures, and environmental barrier coatings (EBCs) are necessary to res...

(This article belongs to the Section Ceramic Coatings and Engineering Technology)
  • Article
  • Open Access
26 Citations
6,753 Views
23 Pages

29 March 2019

In the last decades, Raman spectroscopy has become an important tool to identify and investigate minerals, gases, glasses, and organic material at room temperature. In combination with high-temperature and high-pressure devices, however, the in situ...

(This article belongs to the Special Issue Novel Insights to Raman Spectroscopy: Advances and Prospects)
  • Article
  • Open Access
10 Citations
4,483 Views
33 Pages

2 April 2019

An Nb-silicide based alloy will require some kind of coating system. Alumina and/or SiO2 forming alloys that are chemically compatible with the substrate could be components of such systems. In this work, the microstructures, and isothermal oxidation...

  • Article
  • Open Access
458 Views
14 Pages

Synergistic Effects of the Si/Al Stoichiometry and Catalyst Content on the Growth Mechanism of Mullite Whiskers

  • Haihong Zhang,
  • Fangli Yu,
  • Haifu Li,
  • Haibo Li and ,
  • Qiang Zhi,
  • Bin Li,
  • Fengli He and
  • Yeye Liu
  • + 3 authors+ 0 author

15 May 2026

In this study, mullite single-crystal whiskers were prepared by sintering mullite gel powders using HF as a catalyst via the sol–gel process. The effects of the Al2O3:SiO2 molar ratio on the morphology of mullite whiskers in the Al–Si&nda...

(This article belongs to the Special Issue Advances in Synthesis, Characterization, Structure and Properties of Ceramics)
  • Feature Paper
  • Article
  • Open Access
5 Citations
3,797 Views
13 Pages

Experimental and Modeling Study of Deformability of Glassy CaO-(MnO)-Al2O3-SiO2 Inclusions

  • Qifeng Shu,
  • Chaoge You,
  • Tuomas Alatarvas and
  • Timo Matti Juhani Fabritius

20 March 2022

The occurrence of non-deformable, non-metallic inclusions is the dominant reason for failure of wire during drawing and degrades service life for some steel grades, e.g., tire cord steel. To investigate the deformability of glassy inclusions in CaO-A...

(This article belongs to the Special Issue Inclusion Precipitation during Solidification of Steels)
  • Article
  • Open Access
34 Citations
4,343 Views
30 Pages

Assessment of Inclusion Removal Ability in Refining Slags Containing Ce2O3

  • Jianqi Cao,
  • Yao Li,
  • Wanming Lin,
  • Julong Che and ,
  • Feng Zhou,
  • Yunfang Tan,
  • Dongliang Li,
  • Jie Dang and
  • Chao Chen
  • + 4 authors+ 0 author

23 January 2023

The elimination of inclusions in steelmaking processes has been widely studied. The removal of inclusions by slags containing the rare earth oxide Ce2O3 are studied using an integrated numerical model. The integrated model involves the inclusion moti...

(This article belongs to the Section Industrial Crystallization)
  • Article
  • Open Access
1 Citations
1,785 Views
14 Pages

16 May 2025

In order to reduce the content of harmful impurity sulfur elements in steel to meet the quality requirements of high value-added steel, efficient desulfurization of RH vacuum degassing is essential. Based on the simplex lattice composition design met...

(This article belongs to the Special Issue Green Super-Clean Steels)
  • Feature Paper
  • Article
  • Open Access
10 Citations
3,332 Views
11 Pages

3 February 2021

Fabrication of FeSi-Al2O3 composites with a molar ratio of FeSi/Al2O3 ranging from 1.2 to 4.5 was conducted by the self-propagating high-temperature synthesis (SHS) method. The synthesis reaction involved metallothermic reduction of Fe2O3 and SiO2 by...

(This article belongs to the Special Issue Metallothermic Reactions)
  • Feature Paper
  • Article
  • Open Access
6 Citations
4,165 Views
10 Pages

25 September 2017

Light-weight ferro-aluminium alloys are finding increasing application in the transport sector to reduce overall weights, energy costs and CO2 emissions. As the primary production processes of both Fe and Al are among the most energy-intensive indust...

  • Article
  • Open Access
1,562 Views
20 Pages

New Molecular Theory and Its Model Applications

  • Qixin Wang,
  • Shengchao Duan,
  • Junhan Huang,
  • Xuecheng Peng and ,
  • Wensheng Yang,
  • Xiaodan Zheng,
  • Yiwa Luo and
  • Hanjie Guo
  • + 3 authors+ 0 author

12 March 2025

A new molecular theory of slag suggests that complex oxides in the phase diagram are also present in liquid slag. In contrast to the ion‒molecule coexistence theory, basic oxides (CaO, MgO, MnO, FeO, etc.) in slag are considered to agglomerate...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
7 Citations
4,338 Views
7 Pages

19 April 2017

This paper investigated the effect of Pr6O11 addition on the acid resistance of ceramic proppant. Acid resistance of proppants can be improved by introducing Pr6O11 into the Al2O3-CaO-MgO-SiO2 (ACMS) system. To illustrate and explain the mechanism of...

  • Article
  • Open Access
509 Views
15 Pages

Ceramics, as a handicraft, is the crystallization of art and science. In order to study the firing process of ceramics, improve their density, mechanical properties, viscosity, and surface tension, and enhance the surface quality of the shaft, this a...

  • Feature Paper
  • Article
  • Open Access
2 Citations
3,627 Views
12 Pages

19 November 2019

The slags generated in the conventional copper conversion process are mainly composed of Cu2O–Fe2O3–SiO2 with CaO, Al2O3, and MgO compounds—in concentrations up to 10 wt %. The present work contributes to the knowledge of the conversion process, gene...

(This article belongs to the Section Mineral Processing and Extractive Metallurgy)
  • Feature Paper
  • Article
  • Open Access
7 Citations
4,633 Views
12 Pages

Inclusions Control and Refining Slag Optimization for Fork Flat Steel

  • Yangyang Ge,
  • Shuo Zhao,
  • Liang Ma,
  • Tao Yan and ,
  • Zushu Li and
  • Bin Yang
  • + 1 author+ 0 author

20 February 2019

In order to investigate the causes of the large number of cracks and porosities formed in 33MnCrTiB fork flat steel produced by a special steel plant, scanning electron microscopy (SEM), energy dispersive spectrometer (EDS) analysis, and large sample...

(This article belongs to the Special Issue Ironmaking and Steelmaking)
  • Article
  • Open Access
5 Citations
3,522 Views
14 Pages

Nanoscratch Testing of 3Al2O3·2SiO2 EBCs: Assessment of Induced Damage and Estimation of Adhesion Strength

  • Carlos Alberto Botero,
  • Laura Cabezas,
  • Vinod Kumar Sarin,
  • Luis Llanes and
  • Emilio Jiménez-Piqué

3 March 2023

In this study, the structural integrity of mullite (3Al2O3·2SiO2) films, deposited on silicon carbide (SiC) substrates using chemical vapor deposition (CVD), was investigated via increasing load nanoscratch tests. The films were configured by...

  • Article
  • Open Access
14 Citations
3,482 Views
11 Pages

Preparation of Anorthite/Mullite In Situ and Phase Transformation in Porcelain

  • Shao-Min Lin,
  • Ya-Ling Yu,
  • Ming-Feng Zhong,
  • Huan Yang and ,
  • Yang Liu,
  • Hang Li,
  • Chen-Yang Zhang and
  • Zhi-Jie Zhang
  • + 3 authors+ 0 author

15 February 2023

A high sintering temperature is required to acquire excellent performance in the production of porcelain but results in high fuel consumption. To prepare the porcelain with outstanding performance at a lower temperature, a self-produced additive cont...

  • Feature Paper
  • Article
  • Open Access
5 Citations
4,150 Views
14 Pages

3 September 2020

Iridium hydroxide (Ir(OH)3) nanoparticles exhibiting high catalytic activity for water oxidation were immobilized inside mesospaces of a silica-nanoparticles assembly (SiO2NPA) to suppress catalytic deactivation due to agglomeration. The Ir(OH)3 nano...

(This article belongs to the Section Photocatalysis)

of 12