Materials, Volume 14, Issue 3

Endodontic failure has been and continues to be a problem for endodontics-specialists. Complicated anatomy, numerous foramens, and accessory canals are an environment for microorganisms to infect the teeth. The purpose of the present work was to eval...

Solution calorimetry with liquid aluminum as the bath was conducted to measure the enthalpy of a solution of magnesium and palladium as well as the standard formation enthalpies of selected magnesium-palladium alloys. These alloys were synthesized fr...

The fabrication of well densified wollastonite with smooth appearance by direct sintering method is still a challenge due to the competitive behaviors between sintering and crystallization. In this study, the coarser glass frits with a size of 1–4 mm...

Doping of graphene and a controlled induction of disturbances in the graphene lattice allows the production of numerous active sites for lithium ions on the surface and edges of graphene nanolayers and improvement of the functionality of the material...

The biodeterioration of cementitious materials in sewer networks has become a major economic, ecological, and public health issue. Establishing a suitable standardized test is essential if sustainable construction materials are to be developed and qu...

In this study, the physical and electrical characteristics of an AlN/4H-SiC Schottky barrier diode-based temperature sensor annealed in various gas atmospheres were investigated. An aluminum nitride (AlN) thin film was deposited on a 4H-SiC substrate...

The transition in the use of fiber composite structures from special applications to application in the mass market is accompanied by high demands in quality assurance. The consequential costs of unclear process design, unknown fiber orientations, an...

Silicon carbide (SiC) drift step recovery diode (DSRD) is a kind of opening-type pulsed power device with wide bandgap material. The super junction (SJ) structure is introduced in the SiC DSRD for the first time in this paper, in order to increase th...

The objective of this study is to investigate the tribological behavior of graphene nanoplatelets (xGnPs) as nano-solid lubricants, and to evaluate their applicability to the micro-drilling of multi-directional carbon fiber-reinforced plastic (MD-CFR...

Rotary longitudinal–torsional coupled ultrasonic vibration-assisted grinding (LTUAG) is a new manufacturing method that can improve the grinding ability of silicon carbide ceramics. However, compared with longitudinal ultrasonic vibration-assisted gr...