Reviewer Board (269)

Members of the reviewer board are selected from all Materials reviewers for regularly providing timely high quality reports on submitted manuscripts. Responsibilities of reviewers are available here.

Dr. Zahra Abdollahnejad
University of Oulu
Interests: concrete structures; alkali-activated materials; geopolymer; life cycle assessment (LCA); porous media; CO& lt; sub& gt; 2& /sub& sequestration; durability; cement hydration
Dr. Ali Abdul-Aziz
Fellow ASME, ASNT College of Aeronautics and Engineering, Kent State University
Interests: cmc; SiC-SiC; Composites Turbine Engine; ebc; TBC; Processing; durability; materials testing; characterization; Material defects; Damage and fracture initiation; material modeling; structural health monitoring; nde
Prof. Dr. Rubén Agustín Panadero
Edificio Clin Odontol,C Gasco Oliag 1, Valencia 46021
Faculty of Medicine and Dentistry, Department of Stomatology, Prosthodontic and Occlusion Unit, University of Valencia, Spain
Interests: dental implant, prosthodontics, Dentistry; dental material science; dental ceramics; dental resin materials; adhesion; mechanical properties
Dr. Martino Aldrigo
L4, National Institute for Research and Development in Microtechnologies (IMT-Bucharest), Voluntari (Ilfov), Romania
Interests: electromagnetic simulations and measurements of microwave/millimeter-wave systems for energy-harvesting/emerging communication technology applications; design of 2D (graphene, MoS2...)- and thin film-based components for innovative micro- and nano-devices; ferroelectric thin films for microwave/millimeter-wave applications
Dr. David Alique Amor
Department of Energy, Chemical and Mechanical Technology. Rey Juan Carlos University. c/Tulipán s/n 28933 Móstoles, Madrid (Spain)
Interests: inorganic membranes; composite membranes; dense films; palladium; palladium-based alloys; porous stainless steel; electroless plating; hydrogen separation; membrane reactor; ASPEN modeling
Dr. Humberto Almeida Jr
Department of Mechanical Engineering, Aalto University, Espoo, Finland
Interests: fiber-reinforced composite structures; variable-stiffness composites; buckling and post-buckling; optimization; damage modeling and analysis; creep in composites; filament winding process
Dr. Dmitrii Andreev
Laboratory of SHS Melts and Cast Materials, Merzhanov Institute of Structural Macrokinetics and Materials Science, Russian Academy of Sciences
Interests: metallothermic reactions; combustion synthesis; modeling of combustion processes; self-propagating high-temperature synthesis (SHS); effect of gravity forces on SHS processes; fundamentals of new processes for production of intermetallic, ceramic, and cermet composites; aluminothermic SHS reactions; cast materials
Professor Lavinia Cosmina Ardelean
Department of Technology of Materials and Devices in Dental Medicine, “Victor Babes” University of Medicine and Pharmacy from Timisoara, Romania
Interests: Dentistry; dental materials; dental alloys; dental ceramics; dental resins; welding in dentistry; corrosion of dental alloys; polymers used in dentistry; 3D printing in dentistry; SLS of dental alloys; thermoplastic resins; assessment of dental alloys; CAD/CAM technology, scanning in the dental field
Dr. Christos-Edward Athanasiou
AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Department of Physical Chemistry and Modelling
Interests: Ceramics; Glass; 1D/2D materials; Applied Mechanics; material characterisation; Laser Processing
Dr. Hooyar Attar
Interests: additive manufacturing; metal matrix composites; Wear; Powder Metallurgy
Professor Victor Atuchin
Laboratory of Optical Materials and Structures, Institute of Semiconductor Physics, SB RAS, Novosibirsk 630090, Russia
Interests: crystal physics; crystal chemistry; Materials Science
Dr. Michele Bacciocchi
1. Department of Civil, Chemical, Environmental, and Materials Engineering (DICAM), University of Bologna, Viale del Risorgimento, 40136 Bologna, Italy 2. Dipartimento di Economia, Scienze e Diritto (DESD), University of San Marino, Via Consiglio dei Sessanta, 47891 Dogana, San Marino
Interests: finite element methods; structural mechanics; plates and beams; numerical analysis; laminated composites; multi-phase composites; innovative composite materials; Functionally Graded Materials; carbon nanotubes
Dr. Suresh Kannan Balasingam
Department of Chemical Engineering, Faculty of Natural Science and Technology, Norwegian University of Science and Technology (NTNU), Trondheim-7491, Norway
Interests: nanomaterials for energy conversion and storage; electrochemistry; batteries; supercapacitors; Electrocatalysis; sea water electrolysis; Solar cells; photoelectrochemical water splitting; solar fuels
Dr. Moises Batista
Department of Mechanical Engineering and Industrial Design, School of Engineering, University of Cadiz, Cadiz, Spain
Interests: machining; manufacturing; Cutting Tool; Tool Wear; Tool life; additive manufacturing
Dr. Vincenzo Bellantone
Institute of Intelligent Industrial Technologies and Systems for Advanced Manufacturing-National, Research Council of Italy (STIIMA-CNR), Bari, Italy
Interests: micro injection moulding; polymeric materials and compounds; micro component characterizations; microcavities moulding and surface properties; fem simulation; Lidar and aerosol monitoring
Professor Luis Filipe Almeida Bernardo
C-MADE - Centre of Materials and Building Technologies, Department of Civil Engineering and Architecture, University of Beira Interior, 6200-358 Covilhã, Portugal
Interests: structural analysis and design; numerical modelling; concrete structures; structural materials
Dr. Alexey Beskopylny
Don State Technical University, Rostov-on-Don, Russia
Interests: mechanical properties; metallic materials; dynamic; strength; hardness; Reliability; thermochemical treatment; computational mechanics; Fracture; fracture toughness; contact mechanics; impact; shock; Elastic-plastic behavior; finite element analysis; Nondestructive tests; fatigue; Stress-strain state; Layer materials; Civil Engineering Materials
Professor Dariusz Bochenek
University of Silesia in Katowice, Katowice, Poland
Interests: material engineering; multicomponent ceramic materials and multicomponent solid solutions; multiferroics; biferroics; ferroics; ferroelectric materials with a perovskite type structure; ferroelectromagnetic ceramic materials and ceramic composites; functional materials in applications in microelectronics and micromechatronics
Dr. Tutunaru Bogdan
Department of Chemistry, Faculty of Sciences, University of Craiova, Craiova, Romania
Interests: bioelectrochemistry; Molecular electrochemistry; Electroanalysis; Electrodeposition; Spectroelectrochemistry; Electrodegradation
Dr. Michał Böhm
Department of Mechanics and Machine Design, Faculty of Mechanical Engineering, Opole University of Technology, Opole, Poland
Interests: fatigue; spectral methods; damage mechanics; variable amplitude loading; failure mechanics; lightweight materials; vibration effects; frequency domain methods
Dr. David Bombač
Faculty of Natural Sciences and Engineering, University of Ljubljana
Interests: physical metallurgy; steel; alloy design; computational metallurgy; hot deformation; thermomechanical processing; thermal fatigue
Professor Jan Broda
Institute of Textile Engineering and Polymer Materials, University of Bielsko-Biala, Poland
Interests: polypropylene; polymer structure; Polymer crystallization; wool; fibres; Textiles
Dr. Przemysław Brzyski
Lublin University of Technology, Faculty of Civil Engineering and Architecture, Poland
Interests: building materials; ecological materials; composites; hemp-lime composites; cement; concrete; mortar; plaster; lime; gypsum; thermal insulation; physical and mechanical properties; thermal and moisture properties; building physics
Professor Laura Bulgariu
“Gheorghe Asachi” Technical University of Iaşi, “Cristofor Simionescu” Faculty of Chemical Engineering and Environmental Protection, Department of Environmental Engineering and Management
Interests: environmental pollution; Environmental bioremediation; Heavy metals pollutants; Biosorption/adsorption; Batch and continuous systems; Low-cost biosorbents/adsorbents; Wastewater Treatment; waste recycling; Valorization of exhausted biosorbents/adsorbents; Ecological fertilizers for soils
Dr. Jaka Burja
Institute of Metals and Technology IMT, Slovenia
Interests: metals and alloys; metallurgy; steel; carbon steel; special steel grades; stainless steels; high strenght steels; automotive steels; tool steel; steelmaking; non-metallic inclusions; steelmaking slag; steel heat treatment; steel microstructural characteri
Department of Engineering & Built Environment, Anglia Ruskin University, Cambridge, UK
Interests: additive manufacturing; 3D printing; Rapid Prototyping; industry 4.0; Product Design and Development; Composite/Hybrid Products; Manufacturing Process Design
Dr. Miguel Ángel Caminero Torija
Universidad de Castilla-La Mancha, Ciudad Real, Spain
Interests: computational mechanics; Finite element method; non-linear behaviour; composite materials; additive manufacturing; damage analysis; digital image correlation; ultrasonic testing; carbon-fibre-reinforced epoxy laminates
Dr. Sónia Carabineiro
University of Lisbon, Superior Technical Institute, Portugal
Interests: gold; carbon; Oxides; catalysis; nanoparticles; oxidation; heterogenisation; metal complexes
Professor Ludwig Cardon
Centre for Polymer and Material Technologies CPMT, Department of Materials, Textiles and Chemical Engineering MaTCh, Ghent University, Belgium
Interests: polymer technology; polymer engineering; polymer processing, characterization and (3D) processing of polymers and composites; mould making; additive manufacturing; 3D printing; FFF; SLS; sustainability; reprocessing
Professor Kejie Chen
Department of Earth and Space Sciences, Southern University of Science and Technology, No. 1088 Xueyuan Road, Xili, Nanshan District, 518055
Interests: GNSS Geodesy; Earthquake Source Imaging; Earthquake/Tsunami Early Warning
Dr. Grzegorz Chladek
Faculty of Mechanical Engineering, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, Gliwice, Poland
Interests: dental materials; biomaterials; polymers; composites; antimicrobial materials; mechanical properties; denture; Implants; dental caries
Professor Tomasz Chmielewski
Warsaw University of Technology, Poland
Interests: Fusion welding processes; Friction Welding; Joining of advanced materials; thermal spraying; coatings; surface modification
Dr. Sheng-Heng Chung
University of Texas at Austin, Austin, United States
Interests: Energy conversion and storage materials; metal-sulfur batteries; batteries; sofc; Fuel Cells
Dr. Alexander Yu Churyumov
National University of Science & Technology (MISIS), Moscow, Russian Federation
Interests: steel; aluminum alloys; deformation behavior; Fracture; bulk metallic glasses; finite element modeling; additive manufacturing
Professor Marco Cicciù
Department of Biomedical and Dental Sciences, Morphological and Functional Images, University of Messina, Policlinico G. Martino, Via Consolare Valeria, 98100 Me, Italy2. Multidisciplinary Department of Medical-Surgical and Dental Specialties, Second University of Naples, Naples, Italy
Interests: biomaterials; dental materials; Tissue Engineering; bone regenerations; Prosthodontics
Dr. Mauro Coduri
Department of Chemistry, Università degli Studi di Pavia, via Taramelli 12, 27100, Pavia, Italy
Interests: powder diffraction; pair distribution function; disorder, ionic conductors; ceria; perovskites; Synchrotron radiation
Dr. Denny Coffetti
Department of Engineering and Applied Sciences, University of Bergamo, Italy
Interests: Concerte; cementitious materials; alternative binders; sustainability; Durability of concrete; Admixtures for concrete
Dr. Antonietta Lo Conte
Department of Mechanical Engineering, Politecnico di Milano, Via Giuseppe La Masa 1, 20156 Milan (Italy)
Interests: creep; creep-fatigue; internal damping; corrosion-fatigue
Dr. Bartolomeo Coppola
Department of Applied Science and Technology (DISAT), Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy
Interests: alkali-activated materials; geopolymers; cementitious materials; sustainability; waste recycling; recycled aggregates; polymer nanocomposites; 3D printing; ceramics and composites; digital light processing
Professor Danko Ćorić
Department of Materials, Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Ivana Lučića 1,10000 Zagreb, Croatia
Interests: smart materials; shape memory alloys; cemented carbides; Surface Coatings; Powder Metallurgy; Titanium alloys; mechanical properties of materials
Professor Corina Marilena Cristache
"Carol Davila" University of Medicine and Pharmacy, Department of Dental Technologies, FMAM, 8 Eroii Sanitari Bvd., Bucharest, Romania
Interests: biomaterials; polymers for dental applications; cad/cam; additive technology; nanomaterials; bioprinting
Professor Lech Czarnecki
Building Research Institute / Instytut Techniki Budowlanej, ITB,Warsaw, Poland
Interests: construction; construction durability; building materials; building materials engineering; building materials performance; concrete; polymer concrete; concrete repairs; construction sustainability; nanocomposites
Professor Tomasz Czujko
Interests: advanced structural materials manufactured by unconventional techniques (mechanical alloying, LENS); materials for hydrogen storage obtained by mechanical alloying; superconducting materials fabricated by mechanical alloying and LENS technique; quantitative characterization of microstructure in polycrystalline and nanocrystalline materials; relationship between structure and structural and functional properties of metals and alloys; thermodynamical characterization of manufacturing processes; materials in engineering design (environmental degradation and materials selection)
Professor Antonio D'Andrea
DICEA - via Eudossiana, 18 - 00184 RomaServizi InformaticiEdificio A - Piano 3° - Area StradeStanza: 5
Interests: materials; Road materials, recycling, vibrations, embankments.; Infrastructures; recycling
Professor Pedro Raposeiro Da Silva
Instituto Superior de Engenharia de Lisboa, Lisbon, Portugal
Interests: self-compacting concrete; concrete microstructure and durability; sustainable construction (recycled aggregates in concrete and mortars) and construction technology
Dr. Domenico Dalessandri
School of Dentistry, Department of Medical and Surgical Specialties, Radiological Sciences, and Public Health, University of Brescia, Piazzale Spedali Civili 1, 25123 Brescia, Italy
Interests: biomaterials; adhesion; Ceramics; dental implants; CAD-CAM technology; intra oral scanners; CBCT; esthetics; orthodontics; Prosthodontics
Dr. Piedad N. De Aza
Instituto de Bioingeniería. Universidad Miguel Hernández
Interests: biomaterials; desing and processing bioceramics; phase equilibrium diagrams; 3D -scaffolds; Tissue Engineering; regenerative materials; bone tissue regeneration
Dr. Bernardeta Dębska
Faculty of Civil and Environmental Engineering and Architecture, Rzeszow University of Technology, 35-084 Rzeszow, Poznańska 2, Poland
Interests: building materials; composites; resin composites; polymer mortars; waste materials; design of experiments
Dr. Dan Dobrotă
Universitatea Lucian Blaga din Sibiu, Bd-ul Victoriei nr.10, Sibiu, 550024, Romania
Interests: composites; rubber; Phase Change Materials; metals; welding; Waste; materials testing
Dr. David Dolinger
Foundation for Innovative New Diagnostics, Switzerland, Geneva, Switzerland
Interests: molecular diagnostics; Sequencing; multiplex; immunoassays
Dr. Črtomir Donik
Institute of Metals and technology, scientific associate
Interests: XPS of thin oxide layers; corrosion; AES; FIB SEM; stainless steel; additive manufacturing; ebsd; EDS/WDS; surface science; laser ablation; porous metals
Professor Paulo Nobre Balbis Dos Reis
Department of Electromechanical Engineering, University of Beira Interior, Covilhã, Portugal
Interests: composites; polymer nanocomposites; graphene related composites; bonded repair; additive manufacturing; mechanical characterization
Dr. Dina V. Dudina
Lavrentyev Institute of Hydrodynamics SB RAS, Novosibirsk, Russian Federation
Interests: powder processing; field-assisted sintering; metal matrix composites; microstructure design; reactive sintering; formation and evolution of interfaces in composite materials; mechanical properties
Dr. Tomasz Durejko
Military University of Technology, Faculty of Advanced Technologies & Chemistry, Department of Advanced Materials & Technologies, Urbanowicza 2 Str., 00-908 Warsaw, Poland
Interests: additive manufacturing; metals and alloys; FGM's and composites; Powder Metallurgy; CNC machining, advanced materials characterization
Dr. Ubong Eduok
University of Saskatchewan
Interests: Analytical electrochemistry; corrosion electrochemistry; corrosion; development of corrosion inhibition routes for industrial material protection with special interests in protective coatings/inhibitor designs for biocorrosion/biofouling remediation; cell-material interactions
Professor Paul F Egan
Department of Mechanical Engineering, Texas Tech University
Interests: design; 3D printing; additive manufacturing; lattices; architected structures; Tissue Engineering; scaffolds; muscle; finite element analysis; Mechanics; biomaterials; polymers; optimization; food
Professor Andrea Ehrmann
Faculty of Engineering and Mathematics, Bielefeld University of Applied Sciences, Bielefeld, Germany
Interests: additive manufacturing; electrospinning; textile technology; nanoparticles; measurement technology; magnetism; optics; biopolymers; Tissue Engineering
Dr. Shima Ehtemam Haghighi
School of Science and Engineering, University of the Sunshine Coast, Australia
School of Mechanical and Mining Engineering, The University of Queensland, Australia
Interests: metallic materials; Titanium alloys; Powder Metallurgy; additive manufacturing; Materials characterisation; mechanical properties; Wear
Dr. Nils Ellendt
University of Bremen, Mechanical Process Engineering, Bremen, Germany
Interests: melt atomization; droplet generation; additive manufacturing; materials design; high throughput; spray forming; rapid solidification
Professor Adriana Estokova
Department of Material Engineering, Institute of Environmental Engineering, Faculty of Civil Engineering, Technical University of Kosice, Vysokoskolska 4, Kosice 042 00, Slovakia
Interests: cement composites; durability; biocorrosion; environmental properties (leachability of metals; radioactivity); life cycle assessment (LCA)
Dr. Rita Figueira
Centro de Química da Universidade do Minho
Interests: corrosion; Hybrid Sol-gel Coatings; concrete structures; alkalis-silica reaction; electrochemical sensors
Dr. Roberto Fiorenza
Department of chemical sciences, Università degli studi di Catania, Via A. Doria 6, 95125 Catania, Italy
Interests: heterogeneous catalysis; Photocatalysis; semiconductor photocatalysts; VOCs removal; H2 production and purification; CO-PROX reaction; CO2 valorization
Dr. Stephen Florczyk
Assistant Professor at University of Central Florida
Interests: biomaterials; cell-material interaction; Tissue Engineering; tumor microenvironment; stem cells; Regenerative Medicine
Professor Paolo Foraboschi
Università Iuav di Venezia, Venice, Italy
Interests: Structural Engineering; Seismic Engineering; structural mechanics; structural glass; structural rehabilitation; seismic retrofitting; composite materials; bridges; building materials
Dr. Krzysztof Formela
Gdańsk University of Technology, Faculty of Chemistry, Department of Polymer Technology, Gabriela Narutowicza 11/12, 80–233 Gdańsk, Poland
Interests: plastics and rubber recycling; reactive processing; composites; polymer blends and composites compatibilization; bitumen modification
Dr. Domenico Frattini
Seoul National University of Science and Technology
Interests: Materials for energy applications; mfc; sofc; MCFC; SHTES; LHTES; Modeling; simulations; carbon-based materials; Ceramics; membranes
Professor Dariusz Fydrych
Division of Welding Engineering, Faculty of Mechanical Engineering, Gdańsk University of Technology, G. Narutowicza 11/12, 80-233 Gdańsk; Poland
Interests: underwater welding; fusion welding; solid state welding; explosion welding; weldability of metals; thermal cutting; surfacing; thermal spraying; hydrogen embrittlement; cold cracking; diffusible hydrogen; high strength steel; coatings; cluster analysis
Dr. Rikhav P Gala
Formulation Development, Fraunhofer USA Center for Molecular Biotechnology, Newark, DE, USA
Interests: vaccine formulations; polymeric drug delivery systems; micro-particulate delivery systems; cellulose-based polymers; formulation stability; plant-based vaccines; cancer vaccines; Immunotherapies; infectious diseases vaccines; microneedles for transdermal immunization; oral dissolving films for buccal immunization
Dr. Maxim Galkin
Faculty of Science and Engineering, University of Groningen, the Netherlands
Interests: Polymer Chemistry; polymer composites; natural polymers; lignin; biomass
Professor Antolino Gallego
Department of Applied Physics, Building Engineering School, Campus Fuentenueva, University of Granada, 18072, Granada, SPAIN
Interests: Wood; poplar; composites; engineered wood products; non destructive testing; acoustic emission; elastic waves; vibrations
Dr. Ivan Galvão
ISEL, Department of Mechanical Engineering, Polytechnic Institute of Lisbon, Rua Conselheiro Emídio Navarro, 1959-007 Lisboa, Portugal
CEMMPRE, Department of Mechanical Engineering, University of Coimbra, Rua Luís Reis Santos, 3030-788 Coimbra, Portugal
Interests: solid-state welding; friction stir welding; explosion welding; dissimilar materials welding; solid-state processing
Dr. Dariusz Garbiec
Łukasiewicz Research Network – Metal Forming Institute
Interests: nanomaterials; light metals and alloys; spark plasma sintering; light metal and ceramic matrix composites; hard and superhard materials; relationship between sintering regimes, microstructure and properties of metals, ceramics and composites
Dr. Piergiorgio Gentile
School of Engineering, Newcastle University
Interests: cell-biomaterial interactions; LbL self-assembly systems; nanostructured platforms for tissue engineering and drug release; 3D printing; in vitro models for tissue regeneration; polymer synthesis and characterization; advanced surface technologies
Dr. Emmanuel Georgiou
KU Leuven
Interests: physical metallurgy; surface engineering; aluminium alloys; nanocomposites; Coatings Technology; Tribology; corrosion; tribocorrosion; mechanical properties; hydrogen embrittlement
Dr. Prokopios Georgopanos
Institute of Polymer Research, Helmholtz-Zentrum Geesthacht, Germany
Interests: anionic polymerization; block copolymers; complex architectures; polymer membranes; gas separation; liquid separation; polymer morphology; nanostructures; composite materials
Dr. Seyed Ali Ghahari
Lyles School of Civil and Environmental Engineering, Purdue University, USA
Interests: nanomaterials; Thermoelectric Materials; cement and concrete composites; Stress-Strain Analysis
Dr. Matteo Ghidelli
Group Leader, Thin Films & Nanostructured Materials, Department of Structure and Nano/-Micromechanics of Materials, Max-Planck-Institut für Eisenforschung GmbH, Max-Planck-straße 1, 40237 Düsseldorf, Germany
Interests: Thin Films; nanostructured materials; metallic glasses; high entropy alloys; functional oxides; micro-scale mechanical properties; In-situ characterization; electrical/optical properties
Dr. Rughoobur Girish
Massachusetts Institute of Technology, Cambridge, United States
Interests: carbon nanotubes, graphene, metal oxides, sensors/biosensors, material growth, characterization, plasma generation, field emission/ionization, x-rays; acoustic wave (BAW) sensor; bulk acoustic wave resonators
Dr. Grzegorz Ludwik Golewski
Department of Structural Engineering, Lublin University of Technology, Poland
Interests: fracture toughness and fracture processes of concrete composites; concretes with mineral additives; concretes with fly ash addition exposed to various types of loads (mechanical; thermal; corrosion); nanotechnology in concrete; concrete made on ternary and quaternary binders; reinforced concrete structures loaded dynamically
Dr. Igor Golub
Institute of Condensed Matter and Nanosciences (IMCN), Université Catholique de Louvain (UCLouvain), 1348 Louvain-la-Neuve, Belgium
Interests: energetic materials; batteries; hydrogen storage; borohydrides; Metal hydrides; dihydrogen bonds; non-covalent interactions; ab initio simulations; dft; molecular spectroscopy; synchrotron X-ray radiation
Professor Jacek Gołaszewski
Faculty of Civil Engineering / Department of Building Materials and Processes Engineering, Silesian University of Technology, Gliwice, Poland
Interests: technology of concrete; rheology of cement based mixtures and suspensions; innovative cements and binding materials; usage of raw materials in cement and concrete technology; engineering of building processes
Dr. Álvaro González-Vila
Faculty of Engineering, Université de Mons, B7000 Mons, Belgium
Interests: sensors; optical sensors; Fiber optics; photonics; fiber bragg gratings; plasmonics; Internet of Things (IoT); edge computing; embedded systems
Dr. Saianand Gopalan
Global Center for Environmental Remediation, Faculty of Science and Information Technology, The University of Newcastle, University Drive, Callaghan Campus NSW 2308, Australia
Interests: Electrocatalysis; Materials Science; organic photovoltaics; energy materials; flexible and organic electronics; nanotechnology; solar energy conversion
Dr. Yosuke Goto
Tokyo Metropolitan University, Hachioji, Japan
Interests: okyo Metropolitan University, Department of Physics, Hachioji, Japan Research keywords: Thermoelectric materials; thermoelectric materials superconductor water splitting photocatalyst; superconductor; metal compounds
Dr. Adam Grajcar
Institute of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, 44-100 Gliwice, Poland
Interests: advanced high-strength steels (AHSS); medium-Mn steel; high-Mn steel; TRIP steel; bainitic steel; high-strength low-alloyed steels (HSLA); thermomechanical processing; microalloying; hot strip rolling; heat treatment; plastic deformation; phase transformations; Physical Simulation
Dr. Marijana Hadzima-Nyarko
Faculty of Civil Engineering and Architecture Osijek, Croatia
Interests: Materials Engineering; building materials; concrete; technology of concrete; mechanical properties; materials testing; mechanical engineering; relation between structural and functional properties of construction materials; reuse of waste materials in concrete; concrete materials and structures; masonry structures; numerical simulation; Structural Engineering; behavior of structures under earthquake loading
Professor Kotiba Hamad
School of Advanced Materials Science & Engineering, Sungkyunkwan University (South Korea)
Interests: severe plastic deformation of metals; magnesium based materials; multiscale modeling of plastic deformation in magnesium alloys; polymer blends
Dr. John G. Hardy
Lancaster University
Interests: biomaterials; supramolecular chemistry; polymers; bioelectronics; conducting polymers; Tissue Engineering; drug delivery; stimuli-responsive materials; chitin
Professor Fumitaka Hayashi
Department of Materials Chemistry, Shinshu University, Nagano, Japan
Interests: layered material; nanosheet; ion exchanger; selective ion exchange; Li ion recovery; adsorption; porous materials; radioactive nuclide
Dr. Ay Ching Hee
The University of Adelaide, Adelaide, South Australia 5005, Australia
Interests: thin film deposition; plasma treatments; Wear; corrosion; graphene
Dr. Benoît Hilloulin
Institut de Recherche en Génie Civil et Mécanique, Nantes, France
Interests: smart materials; building materials; nanoindentation; concrete; Supplementary cementitious materials (SCM); Nondestructive testing (NDT); image analysis; Artificial Intelligence
Prof. Dr. Chia-Che Ho
Department of Bioinformatics and Medical Engineering, Asia University, Taichung City, Taiwan
Interests: additive manufacturing and bioprinting; Tissue Engineering; biomaterials; nanomaterials; surface modification; Drug delivery System
Dr. Shahin Homaeigohar
Institute of Biomaterials, University of Erlangen-Nuremberg, Germany
Interests: membrane; adsorption; nanomaterials; biomaterials; Tissue Engineering; electrospinning; composite; nanofiber; wound dressing
Dr. Pawel Horodek
The H. Niewodniczanski Institute of Nuclear Physics, Radzikowskiego 152, 31-342 Krakow, Poland
Interests: defects; positron annihilation spectroscopy; metals; Tribology; surface characterization; ion implantation; surface treatment
Dr. Elżbieta Horszczaruk
Faculty of Civil Engineering and Architecture/ Department of of Reinforced Concrete Structures and Concrete Technology, West Pomeranian University of Technology Szczecin, Poland
Interests: technology of concrete; innovative cements and binding materials; usage of nanomaterials in cement and concrete technology; underwater concrete; wear of concrete; engineering of building processes; building materials
Professor Cheng-Hsun Hsu
Department of Materials Engineering, Tatung University, Taipei City, Taiwan
Interests: metallic materials; heat treatment; coatings; mechanical property; Wear; corrosion
Dr. Marta Molina Huelva
Dp. of Building Structures and Geotechnical Engineering. School of Architecture. Universidad de Sevilla. Av. Reina Mercedes 2. 41012 Sevilla, Spain
Interests: concrete structures; Rehabilitation; building structures
Dr. Igor Iatsunskyi
NanoBioMedical Centre, Adam Mickiewicz University in Poznan, Poland
Interests: solar water splitting; biosensors; atomic layer deposition; nano silicon; metal oxide; Electro spinning; hybrid materials; optoelectronics
Prof. Dr. Balázs Illés
Department of Electronics Technology, Budapest University of Technology and Economics, 1111 Budapest, Hungary
Interests: quality assurance in microelectronics; electronics manufacturing; technological process modeling
Professor Łukasz Jan Laskowski
Institute of Nuclear Physics Polish Academy of Sciences, PL-31342, Krakow, Poland
Interests: silica; mesoporous thin films
Dr. Dawid Janas
Head of Functional Nanomaterials Group, Department of Chemistry, Silesian University of Technology, B. Krzywoustego 4, 44-100 Gliwice, Poland
Interests: nanomaterial; material science; material engineering; chemistry; nanotubes; graphene; nanowires; nanoparticles; carbon; electrical properties; thermal properties; optical properties; thermoelectric properties; catalysis; Thin Films; functionalization
Professor Radoslaw Jasinski
Faculty of Civil Engineering / Department of Building Structures, Laboratory of Civil Engineering Faculty, Silesian University of Technology, Gliwice, Poland
Interests: masonry structures; Reinforced concrete structures; mechanics of materials and structures, mechanical tests of materials; FEM analysis of materials and structures; reliability of the structures; engineering of buildings materials
Professor Jan Jezierski
Department of Foundry Engineering, Faculty of Mechanical Engineering, Silesian University of Technology, 44-100 Gliwice, Poland
Interests: waste management; foundry engineering; metallurgy of ferrous and non-ferrous metals; environmental issues in alloys manufacturing and processing; quality management in metals industry; gating systems optimization in casting designing; castings defects; pneumatic conveying and its applications
Dr. Pawel Jezowski
Poznan University of Technology, Institute of Chemistry and Technical Electrochemistry, ul. Berdychowo 4, 60-965 Poznan, Poland
Interests: Energy Storage; Renewable Energy; Materials synthesis and characterization; Electrochemical capacitors; Metal-ion batteries; Hybrid energy storage devices; Metal-ion capacitors
Dr. Yohei Jinno
Section of Implant and Rehabilitative Dentistry, Division of Oral Rehabilitation, Faculty of Dentistry, Kyushu University
Interests: dental implant; bone substitute material; Prosthodontics
Dr. Paweł Kaczyński
Wrocław University of Sciene and Technology
Interests: crash-box; honeycomb structures; crashworthiness
Dr. Sathiyaraj Kandhasamy
Catalytic and Electrochemical Processes for Energy Applications, Dutch Institute for Fundamental Energy Research (DIFFER), The Netherlands
Interests: Li-ion, sodium, sulfur based batteries; thermo-electrochemical cell; organic and molten salt based electrolytes; ceramic composites; thermal analysis; high-temperature electrochemical cells; materials physical, chemical and electrochemical characterisations
Dr. Henryk Kania
Silesian University of Technology, Gliwice, Poland
Interests: hot dip galvanizing; coatings; corrosion resistacne; surface engeenering
Dr. Zohaib Khurshid
Department of Prosthodontics and Implantology; College of Dentistry; King Faisal University, Al-Ahsa 31982, KSA
Interests: salivary proteins and peptides; antimicrobial peptides; bioactive glasses; bone cement; dental composites; silver diamine flouride; periodontal membranes; dental implants; nanotechnology; nanomaterials; zirconia; polyetheretherketone (peek); polyetherketoneketone (pekk); surface coating of dental materials; adhesive materials and CAD, CAM technology
Dr. Rudolf Kiefer
University of Tartu, Estonia
Interests: conducting polymers in composites and actuators; carbon based materials such as cnt and cdc (carbide derived carbon); coatings and sensors
Professor Andrzej Kiełbus
Department of Advanced Materials and Technologies, Faculty of Materials Engineering, Silesian University of Technology, Gliwice, Poland
Interests: magnesium alloys; aluminium alloys; casting; microstructure; heat treatment; degradation; Materials Characterization
Professor Tae-Hyung Kim
Chung-Ang University
Interests: stem cells; organoids; differentiation; pluripotency; biosensors; Biochips; neurotransmitters; nanomaterials; nanopatterns; electrochemical detection; raman spectroscopy; drug screening
Dr. Michail Klontzas
University Hospital of Heraklion & Institute of Computer Science, FORTH, Greece
Interests: Mesenchymal stem cells; MR imaging; skeletal radiology; bone tissue engineering; alginates; omics analyses
Dr. Svetoslav Kolev
"Microwave Magnetics" Laboratory, Institute of Electronics, Bulgarian Academy of Sciences, Sofia, Bulgaria
Interests: magnetic materials; ferroxide nanoparticles; hexaferrites; structural characterization; composite materials; microwave properties; magnetism; multiferroic materials; magnetic phase transition
Professor Tomasz Koltunowicz
Lublin University of Technology
Interests: electrical engineering; composites; nanocomposites; dielectric properties; electrical properties; structural properties; magnetic properties; tem; afm; Mossbauer spectrscopy
Professor Sergey Konovalov
Samara National Research University, Department of Metals Technology and Aviation Materials, Samara Russia
Interests: welding; Fracture Analysis; Fractography; mechanical behaviour of materials; metallography; scanning electron microscopy; manufacturing technology; materials processing; surface engineering
Dr. Kinga Korniejenko
Cracow University of Technology, Faculty of Material Engineering and Physics
Interests: material characterization; mechanical properties; material testing; circular economy; composite; fly ash; geopolymer; 3D printing; additive manufacturing; Fiber
Prof. Dr. Ewa Korzeniewska
Faculty of Electrical, Electronic, Computer and Control Engineering, Lodz University of Technology, 90-924 Lodz, Poland
Interests: Thin Films; coating technologies; physical vacuum deposition; Materials Characterization; sensors; wearable electronics
Prof. Dr. Peter Koteš
Univerity of Zilina, Civil Engineering Faculty, Department of Structures and Bridges
Interests: reliability of new and existing structures and bridges; failures; repairing; strengthening; using FRP materials; degradation of materials; concrete; reinforcement corrosion; corrosion maps; influence of material degradation o reliability; resistance and serviceability
Dr. Ondřej Kovářík
Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University in Prague
Interests: fatigue; fracture mechanics; thermal spray; scanning electron microscopy
Dr. Aleksander Kowalski
Institute of Non-Ferrous Metals · Department of Metals Processing
Interests: copper alloys; additive manufacturing; pressure infiltration; heat treatment; plastic deformation; microstructure; lightweight alloys
Professor Alicja Krella
The Szewalski Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Fiszera 14 St., Gdansk 80-231, Poland
Interests: PVD coatings; stainless steels; carbon steels; cavitation erosion; dynamic fracture
Dr. Svetlana Krylova
Kirensky Institute of Physics, Federal Research Center KSC SB RAS, Krasnoyarsk, Russia
Interests: raman spectroscopy; crystals; high pressure; temperature; Phase Transitions; ferroelectrics
Dr. Rafał Krzywoń
Department of Structural Engineering, Silesian University of Technology, Gliwice, Poland
Interests: structural concrete; prestressed concrete; composites in construction; composite reinforcement; geopolymer concrete; use of waste materials in concrete; Lightweight concrete; Foamed concrete; mechanical behavior of structural materials; 3D printing in construction
Dr. Joanna Kujawa
Faculty of Chemistry, Nicolaus Copernicus University in Toruń, 7, Gagarina Street, 87-100 Torun, Poland
Interests: membrane modification; functionalization; hybrid materials; ceramic membranes; membrane distillation; Water treatment
Dr. Rawaz Kurda
Instituto Superior Técnico, University of Lisbon, Av. Rovisco Pais, 1049–001 Lisbon, Portugal
Interests: environmental impact; Materials Science; life cycle assessment; geopolymer concrete; green concrete; alkali-activated materials; supplementary cementitious materials; construction and demolition waste; Sustainable concrete and mortar; Costs (economy); multi criteria analysis; optimization
Dr. Iwona Kwiecień
Department of Physical Chemistry and Technology of Polymers, Silesian University of Technology, Poland
Interests: biopolymers; biomaterials; biopolyesters; Polyesters; polyamides; pesticides; biodegradation; transesterification; anionic ring-opening polymerization; mass spectrometry
Dr. Karol Kyziol
Faculty of Materials Science and Ceramics AGH University of Science and Technology
Interests: pvd; PA CVD; plasma technique; magnetron sputtering; surface functionalization; surface modification; plasmochemical modifications; biomaterials; coatings; thin layers; aluminum alloys; Titanium alloys; magnesium alloys; polymers; biopolymers; DLC structure; corrosion resistance; mechanical and tribological properties; anti-wear coatings; cytotoxicity; biocompatibility
Dr. Eva O.L. Lantsoght
Delft University of Technology, Delft, the Netherlands & Universidad San Francisco de Quito, Quito, Ecuador
Interests: concrete structures, structural engineering, steel fiber reinforced concrete, bridge engineering
Dr. Barbara Lapinska
Department of General Dentistry, Medical University of Lodz, Lodz, Poland
Interests: Dentistry; dental material science; dental ceramics; dental resin materials; adhesion; antibacterial properties; mechanical properties
Dr. Hamid Reza Lashgari
School of Materials Science and Engineering, The University of New South Wales (UNSW), Syndey, Australia
Interests: heat treatment of non-ferrous and ferrous alloys; modifying the microstructure; phase transformation; Tribology; metal matrix composites; metallic glasses; and nanoindentation; cocrmo implant alloys
Professor Wen-Jen Lee
Department of Applied Physics, National Pingtung University, TAIWAN
Interests: Thin Films, Coating Technologies, Atomic Layer Deposition, Materials Characterization, Semiconductors, Photoelectrical Devices, Sensors
Professor Daniel Lepadatu
Faculty of Civil Engineering and Building Services, Civil Engineering Department, Gheorghe Asachi Technical University of Iasi, Bd. Mangeron No. 1, 700050 Iasi, Romania
Interests: civil engineering; concrete and advanced material; energye and termal bridges; process optimisation; design of experiments; respoense surface method; artificial neural networks
Dr. Grzegorz Lesiuk
Wroclaw University of Science and Technology
Interests: fatigue; Fatigue Fracture; fracture toughness; microstructure; metals; composites
Dr. Hassane Lgaz
Konkuk University, South Korea
Interests: corrosion inhibition; Analytical electrochemistry; corrosion of carbon steel and steel alloys; development of corrosion inhibitors for industrial material protection; density functional theory and molecular dynamics for corrosion
Dr. Emanoil Linul
Polytecnica Timisoara, Timisoara, Romania
Interests: porous and cellular materials; metallic foams; ceramic foams; syntactic foams; hybrid foams; graded cellular materials; foam-filled structures; Advanced Composite Materials; material characterization; Microstructural analysis
Dr. Angela Longo
Interests: nanocomposites, nanoparticles, graphene, graphene oxide,
Dr. Ricardo Lopez Anton
Facultad de CC. y Tecn. Quimicas (Faculty of Chemistry),Universidad de Castilla-La Mancha (UCLM),Avda. Camilo Jose Cela 10, 13071 Ciudad Real
Interests: nanomaterials; magnetic materials; Thin Films; multilayers; nanoparticles; magnetic properties
Professor Miguel Lorenzo
Department of Mechanical Engineering, University of Salamanca (Spain), ETSII, Avda. Fernando Ballesteros, 2, 37700 Béjar (Salamanca), Spain
Interests: materials; metals; mechanical design; finite element analysis; stress analysis; mechanical properties; mechanical behavior of materials; material characterization; plasticity; fatigue; fracture mechanics; mechanical testing; Failure Analysis; micromechanics of materials
Professor Janos Lukacs
Institute of Materials Science and Technology, Faculty of Mechanical Engineering and Informatics, University of Miskolc, H-3515 Miskolc-Egyetemvaros, Hungary
Interests: metallic materials; welding; fracture mechanics; materials testing; Structural integrity
Dr. Monika Lukomska-Szymanska
Department of General Dentistry, Faculty of Medicine, Medical University of Lodz, Lodz, Poland
Interests: dental composites; dental adhesive systems; ceramic materials; acrylic resins; dental alloys; dentures; dental implants; endodontic materials; endodontic instruments; antimicrobial properties; chemical properties; mechanical properties
Dr. Dũng (Dzung) Dinh Luong
Assistant Professor of Department of Mechanical and Aerospace Engineering, Tandon School of Engineering, New York University, US
Interests: material characterization; syntactic Foams, Material Science, Molecular Dynamics, Composite Materials, Characterization; composite materials; light-weight materials; numerical methods; Finite element method; 3D printing
Dr. Klara Magyari
Universitatea Babes-Bolyai din Cluj-Napoca, Cluj Napoca,
Interests: biomaterials; Tissue Engineering; bioactive glasses; bioactivity; biocompatibility; bone regeneration; skin regeneration
Dr. Kornel Majlinger
Associate professor, Department of Materials Science and Engineering, Faculty of Mechanical Engineering, Budapest University of Technology and Economics, H1111 Budapest Bertalan Lajos str 7. MT building, Budapest, Hungary
Interests: welding, welding of high alloyed steels, welding of ultra high strength steels, metal matrix composites
Professor Ricardo Mallavia Marin
Instituto de Investigación, Desarrollo e Innovación en Biotecnología Sanitaria de Elche (IDiBE); Ed. Torregaitán; Av. de la Universidad s/n, 03202 Elche, Spain
Interests: biomaterials; conjugated polymers; electrospinning; sensors; optical properties; antimicrobial materials; nanomaterials; Skin Patches
Dr. Michele Mattioli
Department of Pure and Applied Sciences, University of Urbino Carlo Bo, Italy
Interests: characterization techniques; optical microscopy; scanning electron microscopy; powder X-ray diffraction; Materials Science; mineralogy; Petrography; crystals; zeolites; crystal chemistry; solid-state chemistry; Environmental geochemistry and health; mineral fibers; fiber toxicity; natural-occurring asbestos
Dr. Grzegorz Mazurek
Kielce University of Technology, Poland
Interests: FEM of pavement structures; rheology of bituminous materials; modeling of bituminous composites structure; non-linear viscoelasticity in mastic and road pavement; multidimensional statistical analysis (Principal Component Analysis, Factor Analysis); optimization methods in material science; warm mix asphalt technology; modern recycled pavements with foam bitumen
Dr. Joana Mesquita-Guimarães
Researcher in TEMA - Centre for Mechanical Technology and Automation University of Aveiro, Portugal
Interests: ceramics, glass, biomaterials, bioceramics, scaffolds architecture, bone grafts, bone tissue engineering, scaffolds processing, antibacterial and bioactive materials, bone implants, dental implants, functionally graded materials, mechanical properties, fl
Dr. Anastasia Mikhaylovskaya
National University of Science & Technology (MISIS), Moscow, Russian Federation
Interests: aluminum alloys; Titanium alloys; copper alloys; superplastic deformation; recrystallization behavior; precipitation phenomenon; Constitutive Modeling
Dr. Andrzej Miklaszewski
Poznan University of Technology, Faculty of Materials Engineering and Technical Physics, Poland
Interests: metal matrix composites; Powder Metallurgy; mechanical alloying; field-assisted sintering; surface engineering; Titanium alloys; structural analysis (XRD)
Dr. Gesmi Milcovich
School of Chemical Sciences, Dublin City University, Dublin 9, Ireland
Interests: Materials Science; nanotechnology; biomechanics; biomaterials; chemistry; Microfabrication; self-assembly; soft matter; Colloids And Interface Science; drug delivery
Professor Katarina Monkova
Faculty of Manufacturing Technologies with the Seat in Presov, Technical University of Kosice, Presov, Slovakia
Interests: cellular materials; manufacturing technologies; technical devices design; numerical analysis and simulation
Dr. Laura Moretti
Department of Civil Building and Environmental Engineering, Sapienza, University of Rome, Via Eudossiana 18, 00184 Rome, Italy
Interests: road pavements; life cycle analysis; Environmental Impacts
Dr. Zuzana Murčinková
Faculty of Manufacturing Technologies with seat in Prešov, Technical University of Košice, Bayerova 1, 080 01 Prešov, Slovak Republic
Interests: Mechanics of Materials; mechanical engineering; applications of composite materials and layered structures; material damping; numerical simulation; machine-tools; machining
Dr. Joanna Mystkowska
Institute of Biomedical Engineering, Bialystok University of Technology, Wiejska 45C, 15-351 Bialystok, Poland
Interests: biomaterials; biopolymers; degradation; polylactide; composite; nanomaterials; nanocomposites; thermal properties
Dr. Marija Nedeljković
Microlab, 3MD, Faculty of Civil Engineering and Geosciences, Delft University of Technology, The Netherlands & TNO Buildings, Infrastructure & Maritime Delft, The Netherlands
Interests: civil engineering, concrete structures, building materials, concrete recycling, concrete durability, carbonation, alkali activated materials, circular concrete, characterization techniques, materials chemistry
Dr. Rui Neves
Polytechnic Institute of Setúbal, Barreiro Technology School, 2839-001 Lavradio, Portugal
Interests: Recycled aggregate concrete; textile reinforced concrete; concrete durability; reinforced concrete corrosion
Professor Mircea Nicoara
Department for Materials and Manufacturing Engineering, Politehnica University Timisoara
Interests: materials science and engineering
Dr. Wojciech Nowak
Rzeszow University of Technology, Department of Materials Science, Al. Powstanców Warszawy 12, 35-959 Rzeszow, Poland
Interests: High temperature oxidation, Corrosion resistance, Oxide scales, Protective coatings, Thermal Barrier Coatings, High temperature materials
Dr. Michał Nowicki
Warsaw University of Technology, Institute of Metrology and Biomedical Engineering
Interests: material characterization; magnetic materials; magnetic properties; Magnetoelastic Effect; Stressimpedance; magnetism; measurement systems; sensors; metrology; Thermoelectricity; NDT; GMI; thermography; open source software
Professor Artur Nowoświat
Faculty of Civil Engineering / Department of Building Materials and Processes Engineering, Silesian University of Technology, Gliwice, Poland
Interests: Building Acoustics, building materials, heat and mass transport, building physics Photograph if possible
Dr. Joji Okazaki
Osaka Dental University
Interests: nano materials; implant, in vivo analysis, in vitro analysis, antibacterial material, titanium, zirconia, biomaterial, QCM analysis, denture material, denture cleaner
Professor João Pedro Oliveira
Faculdade de Ciências e Tecnologias, Universidade Nova de Lisboa, 2829-516 Caparica, Portugal
Interests: welding; additive manufacturing; x-ray diffraction; shape memory alloys; characterization techniques; sem; TEM.
Professor Imre Orbulov
Department of Materials Science and Engineering, Faculty of Mechanical Engineering, Budapest University of Technology and Economics, Hungary MTA-BME Lendület Composite Metal Foams Research Group, Hungarian Academy of Sciences, Hungary
Interests: metallic foams; metallic foams, metal matrix composites, mechanical testing, fatigue, fracture mechanics; metal matrix composites; mechanical testing; fatigue; fracture mechanics
Professor José Marcos Ortega
Department of Civil Engineering, University of Alicante, P.O. Box 99, E-03080 Alicante, Spain
Interests: sustainable construction and building materials; new supplementary cementitious materials; performance of eco-friendly materials and structures exposed to real hardening environments and non-optimum exposure conditions; microstructure; durability; mechanical properties; non-destructive characterization; sustainability assessment
Dr. Krzysztof Adam Ostrowski
Affiliation: Faculty of Civil Engineering, Cracow University of Technology, Poland
Interests: Construction Engineering, Civil Engineering Materials, Building Materials, Construction Materials, Concrete Technologies, Civil Engineering Technology, Concrete Durability, Concrete Material Technology, Geotechnics, Reinforced Concrete, Laminated Composit
Professor Marián Palcut
Slovak University of Technology in Bratislava, Slovakia
Interests: corrosion; oxidation; diffusion; metals; alloys; Oxides; Materials Characterization; microstructure investigation; mechanical properties; thermal analysis
Professor Paulo Jorge Palma
Dentistry Department and Center for Innovation and Research in Oral Sciences (CIROS) - Faculty of Medicine, University of Coimbra, 3000-075 Coimbra, Portugal
Interests: dental materials; Dentistry; endodontics materials; Tissue Engineering; apexification; dental stem cells; root canal materials; calcium silicate-based cements; cyclic fatigue; niti-files; bioceramics; discolaration materials; regeneration endodontics materials; control infection in dental office
Dr. Gaetano Palumbo
AGH University of Science and Technology, Krakow MP, Poland
Interests: corrosion electrochemistry; corrosion inhibition; sour and sweet corrosion of carbon steel and steel alloys; high pressure high temperature (HPHT) corrosion; protective coatings; biocorrosion; tribocorrosion
Dr. Gong Pan
Huazhong University of Sciences and Technology, Wuhan, China Dr. Gong has been working on metallic glass and metallic glass composites for more than one decades.
Interests: bulk metallic glasses; alloy development; high entropy alloys; Ti alloys; metal plastic forming
Dr. George A. Pantazopoulos
ELKEME - Hellenic Research Centre for Metals S.A.
Interests: Failure Analysis; Fracture Analysis; Fractography; fracture mechanics; mechanical behaviour of materials; metallography; scanning electron microscopy; manufacturing technology; materials processing; machinability; surface engineering; corrosion; Tribology; quality assurance; design of experiments
Dr. Spyros Papaefthymiou
National Technical University of Athens, School of Mining & Metallurgical Engineering, Athens, Greece
Interests: physical metallurgy & amp; alloy design; microstructure-properties-fracture relationships; forming of metals and alloy; welding and joining and heat treatments; Mechanical Pr
Dr. Durga Parajuli
National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, Japan
Interests: adsorption, nanomaterial, metal removal, nitrogen recycling, wastewater treatment, environmental remediation
Dr. Solmoi Park
Civil and Environmental Engineering Department, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Korea
Interests: cementitious materials; characterization; durability; thermodynamic modeling; nmr spectroscopy; x-ray diffraction; alkali-activated materials; geopolymer
Dr. Jennifer Patterson
Independent Consultant (Belgium) and Chief Scientific Officer (BIOFABICS LDA, Portugal)
Interests: biomaterials; hydrogels; molecular engineering; polymers; supramolecular materials; nanoparticles; microspheres; controlled release; Tissue Engineering
Dr. Suvash Chandra Paul
International University of Business Agriculture and Technology
Interests: durability of concrete structures; recycle waste materials in concrete; 3D concrete printing, nanoparticles in cement-based materials
Professor Zbyšek Pavlík
Department of Materials Engineering and Chemistry, Faculty of Civil Engineering, Czech Technical University in Prague, Thákurova 7, 166 29 Prague, Czech Republic
Interests: Materials Engineering; building materials; concrete; cement and lime base composites; reuse of waste materials in construction products; pcms; thermal insulation materials; high performance construction composites; magnesium oxychloride cement concrete; relation between structural and functional properties of construction materials; cement replacement materials; application of pozzolans in building materials; building materials for high-temperature applications
Dr. Ana Pavlovic
University of Bologna - Department of Industrial Engineering
Interests: composite structure; composite material; fem analysis; numerical simulation; structural analysis
Dr. Andrea Petrella
Dipartimento di Ingegneria Civile, Ambientale, Edile, del Territorio e di Chimica, Politecnico di Bari, Via E. Orabona, 4, 70125, Bari, Italy
Interests: use of recycling organic and inorganic materials in the building trade and/or in the removal of heavy metals present in wastewater; photocatalytic materials for the degradation of bio-persistent pollutants in water and wastewater; nanocomposites for energy conversion and for novel optical devices
Dr. Michal Petru
(1). Department of Machinery Construction, Institute for Nanomaterials, Advanced Technologies and Innovations, Technical university of Liberec, 461 17, Liberec, Czech Republic
(2). Department of Design of Machine Elements & Mechanism, Faculty of Mechanical Engineering, Technical university of Liberec, 461 17, Liberec, Czech Republic
Interests: finite element methods; structural mechanics; design machine, machine parts, textile engineering, agricultural science, environmental science, numerical analysis; laminated composites; multi-phase composites; innovative composite materials; optimization
Dr. Luca Pezzato
Department of Industrial Engineering, University of Padova
Interests: metallurgy, corrosion, metallography, coating, steels, ligh alloys
Dr. Damian Pietrusiak
Wrocław University of Science and Technology, Wroclaw, Poland
Interests: mining machines; heavy machinery; Structural Engineering; structural dynamics; industrial engineering; Finite Element Analysis (FEA); mechanical engineering; testing and measurements signal processing; R& amp; d; vibrations; fatigue; Acoustics; vibroengineeri
Professor Danil Pimenov
Department of Automated Mechanical Engineering, South Ural State University, Lenin Prosp. 76, Chelyabinsk, 454080, Russia
Interests: machining; manufacturing; sustainability; optimization; Tool Wear; finite element analysis
Dr. Deesy Pinto
CQM-Centro de Química da Madeira, MMRG, Universidade da Madeira, Campus da Penteada, 9020-105 Funchal, Portugal
Interests: nanocomposites; aluminium oxide; composites; reinforcement; metal oxide nanoparticles; numerical modeling; refractories; laminates; epoxy; etc.
Dr. Tahira Pirzada
Chemical & Biomolecular Engineering, North Carolina State University, Raleigh, NC, USA
Interests: hybrid materials; 2d materials; aerogels; nanofibers; sol-gel processing; composites; sustainability; crop protection; sustainable agriculture; polymer-silica hybrids; sol-gel processed silica; pulp and paper
Dr. Marek Pszczola
Faculty of Civil and Environmental Engineering, Department of Highway and Transportation Engineering, Gdańsk University of Technology, Narutowicza 11, 80-233 Gdańsk, Poland
Interests: low-temperature properties of asphalt mixtures; low temperature cracking assessment of pavement structures; road materials properties; thermal stress analysis; design of pavement structures; airfield design and analysis --------------------
Dr. Salvatore A. Pullano
Department of Health Sciences, University Magna Graecia of Catanzaro
Interests: ferroelectric sensors; piezopolymers; transduction phenomena
Dr. Aaron Pung
Sandia National Laboratories
Interests: radar cross section remote sensing photonics optics micro resonator imaging hyperspectral
Professor Sukhoon Pyo
UNIST (Ulsan National Institute of Sciences and Technology)
Interests: ultra high performance concrete (UHPC); high performance concrete; sound absorbable concrete; FIBER REINFORCED CONCRETE; sustainable construction materials; railway engineering
Dr. Khaled Ragab
Department of Applied Sciences, University of Quebec (UQAC), Main Building, Office P4-5050, Chicoutimi (Quebec), Canada, G7H 2B1
Interests: Metallurgical and materials engineering; materials performance; mechanical characteristics; microstructure characteristics; casting materials; powder metallurgy materials; composites; fatigue fracture analysis; heat treatments of metals and alloys
Dr. Julián J. Reinosa
Instituto de Cerámica y Vidrio, CSIC - Spanish Research Council
Interests: TiO& amp; lt; sub& gt; 2& /sub& , ZnO, photocatalysts, ceramic materials, glass, glazes, multifuncional properties
Dr. Lukas Richtera
Affiliation (1): Department of Chemistry and Biochemistry, Mendel University in Brno, Zemedelska 1, CZ-613 00 Brno, Czech Republic
Affiliation (2): Central European Institute of Technology, Brno University of Technology, Purkynova 123, CZ-612 00 Brno, Czech Republic
Interests: nanomaterial synthesis and characterization; nanoparticles; nanocomposites; carbon-based nanomaterials
Dr. Hannes Rijckaert
SCRiPTS, Department of Chemistry, Ghent University, Ghent, Belgium
Interests: transmission electron microscope; nanoparticles; thin film; nanocomposite; material; scanning electron microscope; x-ray diffraction; superconductor; ferroelectric; opto-electronic; electronic; nucleation and growth
Dr. Conrad Rizal
Principal Research Scientist, Photonics Laboratory, GEM Systems Inc., Markham, ON, L3R 5H6, Canada
Interests: magneto-optics & amp; magnetoplasmonics - an interdisciplinary field that merges magnetism; plasmonics and photonics; design and development of multifunctional nanocomposites using chemical & physical vapour methods; design and development of multifunctional nano-scale multilayers using e-beam and sputtering methods; development of magneto-optic principle based biosensors for early disease detection; sensing and imaging using nano-photonics; magneto-optics and biology; cancer detection and stimulation using new sensors; and point-of-care testing using portable devices; development of new biocompatible nanostructures with enhanced magneto-optical properties and new magneto-optic configuration combining smart nano-magnetics; magneto-optics and nano-photonic nano-structures
Dr. Noel Rodriguez
Department of Electronics and Computer Technology, University of Granada, Spain
Interests: device characterization, sensors, transducers, energy harvesting, supercapacitors, memristors, power circuits, SiC, laser induced graphene, graphene oxide, flexible electronics
Professor Ángel Rodríguez Saiz
Department of Construction Engineering Higher Polytechnic School − Campus de La Milanera University of Burgos – Burgos, Spain
Interests: mortars; concrete; polymers wastes; construction wastes; slag; construction durability; construction and safety; construction activities and works management
Professor Grzegorz Rogalski
Welding Engineering Group, Faculty of Mechanical Engineering, Gdańsk University of Technology, G. Narutowicza 11/12, 80-233 Gdańsk; Poland
Interests: underwater welding; explosion welding; fusion welding; solid state welding; thermal spraying, thermal cutting; surfacing; weldability of metals; welding thermal processes; normalization; welding quality assurance and control; coatings; hydrogen embrittlement; stainless steel; nickel alloys; Titanium alloys
Dr. Juan Jesús Roldán Gómez
robotics, robotics in agriculture, multi-robot systems, interfaces, virtual reality, artificial intelligence, machine learning
Interests: robotics, robotics in agriculture, multi-robot systems, interfaces, virtual reality, artificial intelligence, machine learning
Dr. Paweł Romanowicz
Institute of Machine Design, Cracow University of Technology,ul. Warszawska 24, 31-155 Cracow, Poland
Interests: mechanical testing; Materials characterisation; stress and strain analysis; fatigue; fracture mechanics; multiaxial high-cycle fatigue criteria; rolling contact fatigue; Failure Analysis; Applied Mechanics; Computational Solid Mechanics; mechanical behavior of materials; contact mechanics; finite element analysis; digital image correlation; rolling bearings; composites; metals
Dr. Vincenzo Russo
University of Naples Federico II
Interests: catalysis; kinetics; modelling; reactor design
Dr. Valentina Sabatini
Università degli Studi di Milano
Interests: protective coatings; nanocomposites; hybrid materials; polymers with complex macromolecular structure
Dr. Abdollah Saboori
Department of Applied Science and Technology (DISAT), Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino—Italy
Interests: metal additive manufacturing; Materials Engineering, in particular, Metal Additive Manufacturing; Powder Metallurgy; electron beam melting; directed energy deposition; thermomechanical processing; heat treatment; metal matrix composites; Titanium alloys; Al alloys; magnesium alloys; steel
Professor Łukasz Sadowski
Wrocław University of Science and Technology
Interests: concrete; non-destructive testing; surface morphology; acoustic techniques and artificial intelligence
Dr. Emilia-Adela Salca
Faculty of Wood Engineering, Transilvania University of Brasov, Bulevardul Eroilor 29, Brașov 500036, Romania
Interests: veneers, densification, colour of wood, heat treatment of wood, wood surface roughness, wood processing
Dr. Antonio Sánchez Egea
Universiat Politecnica Catalunya
Interests: hybrid manufacturing; machine tools; modelling; material characterization; thermo-mechanical process
Dr. Giuseppe Santarsiero
School of Engineering, University of Basilicata (Italy)
Interests: concrete structures; in-situ concrete strength evaluation; seismic vulnerability and risk; energy and seismic rehabilitation of structures; bridge constructions
Dr. Eleonora Santecchia
Interests: additive manufacturing, metals and alloys, powder metallurgy, scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction, materials characterization, tribology
Dr. Gianvito Scaringi
Institute of Hydrogeology, Engineering Geology and Applied Geophysics, Charles University, Prague, Czech Republic
Interests: soil mechanics; clay; coupled processes; constitutive modelling; numerical simulations; landslides
Professor Mieczyslaw Scendo
Institute of Chemistry, Jan Kochanowski University in Kielce, Swietokrzyska 15G, PL-25406 Kielce, Poland
Interests: kinetics and mechanism of electrode reactions; corrosion of metals and alloys; corrosion inhibitors; deposition techniques for coating (cold spray); metallic protective coatings; microstructure characterization
Dr. Elena Scutelnicu
Universitatea Dunarea de Jos din Galati, Galati,
Interests: welding, joining, behavior of materials during welding, mechanical characterization of welded joints, welding metallurgy, modelling and simulation of welding
Dr. Elisabeta-Corina Secu
Laboratory of Optical Processes in Nanostructured Materials, National Institute of Materials Physics, Buchaeest-Magurele ROMANIA
Interests: sol-gel synthesis, fluoride nanocrystals, photoluminescence, thermoluminescence, rare-earths, radiation defects
Dr. Mostafa Seifan
School of Engineering, Faculty of Science and Engineering, The University of Waikato, Hamilton 3216, New Zealand
Interests: biomineralization; additive manufacturing of cementitious materials; concrete; self-healing material development, particularly concrete; self-healing; nano-materials in concrete and sustainable concrete technology, smart product fabrication and testing; microbially induced calcium carbonate precipitation; ureolysis; Additive manufacturing of concrete Nano-materials in concrete and sustainable concrete technology
Dr. Yu Sekiguchi
Institute of Innovative Research, Tokyo Institute of Technology, 4259 Nagatsuta-cho, Midori-ku, Yokohama, Kanawaga 226-8503 Japan
Interests: adhesion; interface; fracture mechanics; contact mechanics; structural adhesives; pressure-sensitive adhesives; wettability; surface modification
Dr. Nicolae Serban
University POLITEHNICA of Bucharest, Materials Science and Engineering Faculty, Materials Processing and Ecometallurgy Department, 313 Splaiul Independentei, 060042 Bucharest, Romania
Vice President of the Romanian Forging Association, Head of QForm Software Training Center Romania
Interests: plastic deformation; forging; extrusion; Heat treatments; thermomechanical processing; severe plastic deformation; equal channel angular pressing; Materials synthesis and characterization; metallography; mechanical testing; microstructural characterization; Fractography; steels; Titanium alloys; aluminum alloys; magnesium alloys; biomaterials; nanostructured materials; ultrafine-grained materials; metal matrix composites; modeling and simulation; finite element analysis
Dr. Rafael Shehu
Department of Civil and Environmental Engineering (DICA), Politecnico Di Milano, Milan 20133, Italy
Interests: Earthquake Engineering; vulnerability; structural design; masonry structures; Reinforced concrete; composite structures; structural strengthening
Dr. Kamyar Shirvanimoghaddam
Carbon Nexus, Institute for Frontier Materials, Deakin University,Vic, Australia
Interests: nanomaterials; composites(MMC, PMC, CMC); sustainability; carbon nanotube(CNT); waste recycling; carbon based structure
Dr. Sónia Simões
Metallurgical and Materials Engineering Department, Faculty of Engineering, Oporto University, 4099-002 Porto, Portugal
Interests: nanomaterials; Reactive Multilayers; joining (diffusion bonding and brazing); microstructural and mechanical characterizations; Titanium alloys; lightweight alloys; titanium and nickel aluminides; metal matrix nanocomposites; phase transformations
Dr. Swee Leong Sing
Singapore Centre for 3D Printing, School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore
Interests: 3d bioprinting; 3D printing; additive manufacturing; biomaterials; bioprinting; powder bed fusion; selective laser melting
Dr. Jitendra Singh
Hanyang University, Korea
Interests: synthesis of nanocomposite coating; dual metal/polymer coating; thermal spray technology; hot dip galvanizing; coatings; corrosion; Electrochemical; eis; potentiodynamic polarization; inhibitor; synthesis of novel materials for corrosion protection of metals and alloys; concrete; fabrication and durability performance of sensor and semi-conductor; energy and advanced materials; nano technology; advanced materials and process; x-ray diffraction; scanning electron microscopy; Atomic Force Microscopy; raman spectroscopy; x-ray photoelectron spectroscopy; transmission electron microscopy X-ray Diffraction
Dr. Piotr Smarzewski
Politechnika Lubelska, Department of Structural Engineering, Lublin, Poland
Interests: Structural Engineering; concrete materials and structures; fibre reinforced concrete; self-compacting concrete; use of waste materials in concrete; fracture mechanics of cementitious materials; concrete durability, numerical simulation
Dr. Daniele Sofia
University of Salerno, Italy
Interests: process engineering; process simulation; chemical engineering; Additive Manufacturing, Air Quality; process modeling; gasification; Coal; power plants; indoor air quality; optical microscopy; Air Pollution Monitoring; steam turbine; air quality modeling; industry 4.0; Air Quality Management; Air Quality Control; selective laser sintering; laser sintering
Professor Luís Sousa
Geology Department, University of Trás-os-Montes e Alto Douro, Portugal
Interests: building stones and building materials; physical-mechanical properties; weathering; fracturing; quarrying; exploration planning
Dr. Ivo Stachiv
Department of functional materials, Institute of Physics, Czech Academy of Sciences, Prague, Czech Republic
Interests: smart materials; shape memory alloys; nanomechanics; non-linear mechanics; MEMS/NEMS; smart sensors; Thin Films
Dr. Miruna Stan
Universitatea din Bucuresti, Bucharest
Interests: biomaterials; nanoparticles; photocatalysts; cytotoxicity; cell-material interaction; quantum dots; Tissue Engineering
Dr. Katarzyna Staszak
Poznan University of Technology, Institute of Chemical Technology and Engineering, ul. Berdychowo 4, 60-965 Poznań, Poland
Interests: Wastewater Treatment; waste recycling; Environmental Chemistry; metal recovery; hydrometallurgy, membranes; separation technologies; surfactants; colloid and surface chemistry
Dr. Marcin Stawarz
Silesian University of Technology, Gliwice, Poland
Interests: ductile cast iron; high silicon cast iron; SiMo cast iron; continous casting; investment casting; intermetallic phases; corrosion; crystallization of cast iron; tda method; wear resistance of cast iron
Dr. Oldrich Sucharda
VSB - Technical University of Ostrava, Faculty of Civil Engineering
Interests: concrete; civil engineering; Reinforced concrete; mechanical properties; building materials; nonlinear analysis; Finite element method; Experimental testing; FIBER REINFORCED CONCRETE; fracture mechanics
Dr. Jin-Yoo Suh
Principal Research Scientist; Center for Energy Materials Research, Korea Institute of Science and Technology, Hwarang-ro 14-gil 5, Seongbuk-gu, Seoul 02792, Republic of Korea
Interests: metallic materials for hydrogen energy (solid state hydrogen storage, hydrogen separation membrane, hydrogen embrittlement); High temperature creep behavior of metals (heat-resistant steels and superalloys/their welded part and heat affected zone)
Dr. Hao Sun
Department of Chemistry, Northwestern University, Evanston, IL, USA
Interests: living/controlled radical polymerization; ring-opening metathesis polymerization; Polymer Chemistry; dynamic-covalent chemistry; stimuli-responsive polymer materials; drug delivery systems; polymer bioconjugates
Professor Prannoy Suraneni
Department of Civil, Architectural, and Environmental Engineering, University of Miami, USA
Interests: materials science, chemistry, and engineering of cementitious materials; Concrete Technologies Building Materials Construction Materials Civil Engineering Materials Construction Construction Engineering Building Structural Analysis Earthquake Engineering Structural Dynamics; infrastructure sustainability; concrete durability; novel infrastructure materials; supplementary and alternative cementitious materials; chemical admixtures
Dr. Miroslaw Szala
Interests: coating; thin film; direct metal laser sintering; metal additive manufacturing: metal matrix composite; stainless steel; nickel alloys; cobalt alloys; stellite; Titanium alloys; metal biomaterials; self-fluxing alloy; cermet; steel; structural steels; tialn; altin; high entropy alloy; wear testing; Cavitation; cavitation erosion; wear abrasive; slurry erosion; slurry wear; sliding wear; friction; abrasion; Tribology; Fractography; welding; cladding; padding; overlay; ceramic and metal coatings; thermal spraying; plasma spraying; aps; sps; hvof; flame spraying; coatings deposition; magnetron sputtering; additive manufacturing; shoot peening; heat treatment; ion implantation; surface engineering; pitting corrosion; surface roughness; mechanical properties; hardness; fracture toughness; x-ray diffraction; microstructure; adhesion
Dr. Maciej Szeląg
Lublin University of Technology, Poland
Interests: civil engineering; Materials Engineering; cement; concrete technology; image analysis; nanotechnology; nanomaterials; fibers; elevated temperature; mechanical properties; physical properties; structure of materials; fractals
Dr. Ahmed Talaat
Física de Materiales, University of the Basque Country (UPV/EHU)
Interests: magnetism and magnetic materials; ferromagnetic metallic glasses; functional (nano)composite materials; Magnetic hyperthermia; Induction heating; giant magnetoimpedance effect; domain wall dynamics; rapid solidification techniques, mechanical alloying
Dr. Abbas Tamadon
Department of Mechanical Engineering, University of Canterbury, Christchurch 8041, New Zealand
Interests: metallurgy and materials science; alloys and composites; welding and joining methods; microstructure and microscopy; phase characterization; additive manufacturing
Dr. Chao-Wei Tang
Department of Civil Engineering & Geomatics, Cheng Shiu University
Interests: concrete materials, lightweight aggregate concrete, neural networks
Dr. Piergiorgio Tataranni
Department of Civil, Chemical, Environmental and Materials Engineering, University of Bologna, Italy
Interests: road pavements; asphalt; recycled materials; Asphalt Technology; recycling of industrial wastes and by-products, reclaimed asphalt pavement, alkali-activated materials
Dr. Antonio José Tenza-Abril
Department of Civil Engineering, University of Alicante, P.O. Box 99, E-03080 Alicante, Spain
Interests: concrete, lightweight concrete, mortars, waste
Dr. Claudio Testani
Laser Research Consortìtium-CALEF C/O ENEA, Rome, Italy
Interests: titanium; aluminium; rolling; extrusion; special steels; additive manufacturing; Powder Metallurgy; hip; hot forging
Dr. Oleksandr Tkach
CICECO - Aveiro Institute of Materials, Department of Materials and Ceramic Engineering, University of Aveiro, Portugal
Interests: high-k dielectrics; ferroelectrics; magnetoelectrics; oxide thermoelectrics; electroceramics
Dr. Ionut Ovidiu TOMA
The "Gheorghe Asachi" Technical University of Iasi, Romania
Interests: materials in civil engineering; sustainable construction materials; high performance construction materials; concrete structures; Experimental testing
Dr. Jacek Tomków
Division of Welding Engineering, Faculty of Mechanical Engineering, Gdańsk University of Technology, G. Narutowicza 11/12, 80-233 Gdańsk; Poland
Interests: underwater welding, welding, materials engineering, friction stir welding, non-destructive testing, metals
Dr. Jose Antonio Travieso-Rodriguez
Universitat Politècnica de Catalunya. Escola d'Enginyeria de Barceloa Est. Mechanical Engineering Department
Interests: burnishing; vibration-assisted processes; machining; manufacturing; additive manufacturing; mechanical properties characterization
Dr. Quoc Tri Phung
Belgian Nuclear Research Center, Health and Safety, Mol, Belgium
Interests: Cement Chemistry; cement hydration; concrete durability; ca-leaching; carbonation; sulphate attack; OPC cement; geopolymers; microstructure; transport properties; cemented waste
Dr. Evgeny Trofimov
South Ural State University
Interests: metals; alloys; Ceramics; high-entropy phases; thermodynamic analysis; calphad; magnetic properties; phase equilibria
Dr. Tomasz Trzepiecinski
Department of Materials Forming and Processing, Rzeszow University of Technology, Al. Powst. Warszawy 8, 39-959 Rzeszów, Poland
Interests: anisotropic plasticity; Tribology; composites; computational modeling; Finite element method; constitutive modelling; FEM; finite element method (FEM); friction; friction stir welding; Friction Welding; sheet metal forming; Fiction; manufacturing processes; materials forming; Sheet metal forming, Tribology; FML; friction material; refill friction stir spot welding, RFSSW
Dr. Oleg Udalov
1) Physics and Astronomy, California State University Northridge, Northrdige, USA
2) Institute for physics of microstructures RAS, Nizhny Novgorod, Russia
3) Nizhny Novgorod State University, Nizhny Novgorod, Russia
Interests: magnetic nanostructures; multiferroics; magneto-electric effect; electron transport; neutron scattering
Dr. Jan Valentin
Faculty of Civil Engineering, Czech Technical University in Prague
Interests: bituminous binders; Asphalt mixture; pavement structures; recycling and reuse; waste materials; functional testing of asphalt and bitumen; bitumen rheology
Dr. Stefano Valvano
Faculty of Engineering and Architecture, Kore University of Enna, Cittadella Universitaria, 94100 Enna , Italy
Interests: computational mechanics, composite materials, viscoelasticity, smart materials, piezoelectricity, thermal stresses, hygro-thermal analysis, multifield analysis, finite element method, analytical methods, plate and shell models, beam models
Professor Emanuel Vamanu
University of Agricultural Sciences and Veterinary Medicine Faculty of Biotechnology - Department of Industrial Biotechnology
Interests: in vitro simulation, biosynthesis, antimicrobial, biomaterials, metallic nanoparticles
Professor Helena Cristina Vasconcelos
Faculty of Sciences and Technology, Azores University, Portugal
Interests: Materials physics and nanotechnology, thin films, coating technologies, surface materials characterization, optical characterization of rare-earths doped optically active materials, waveguides and optical amplifiers, functionalized surfaces for advanced m
Dr. Bogdan Stefan Vasile
National Research center for Micro and Nanomaterials, Department of Science and Engineering of Oxide Materials and nanomaterials, Faculty of Applied Chemistry and Materials Science, Politehnica University of Bucharest, Bucharest, 011061, Romania
Interests: nanomaterials synthesis and characterization, transmission electron microscopy
Dr. eugenio velasco ortega
Department Estomatologia, Facultad de Odontología, Universidad de Sevilla, 41009 Sevilla, Spain
Interests: dental implants; surface implants; titanium; regenerative materials for oral surgery; implant dentistry; bone substitutes in dentistry
Dr. Igor Velkavrh
V-Research GmbH,Austria
Interests: Tribology; surface engineering; mechanical testing; friction; Wear; material characterization; Advanced Materials; Surface Coatings
Dr. Diego Vergara
Technological Department, University Catholic of Ávila, C/Canteros, s/n, 05005 Avila, Spain
Interests: metallography; material characterization; mechanical properties; mechanical behavior of materials; mechanical testing; materials testing; stress and strain analysis; fracture mechanics; Fractography; corrosion science; Failure Analysis; fatigue; finite element analysis; virtual reality; Technology enhanced Learning, virtual learning environments
Dr. Salvatore Verre
Department of Civil Engineering, University of Calabria
Interests: masonry and RC structures; RC beams flexural/shear/torsion strengthening; SRG/FRCM systems; masonry strengthening; numerical and analytical model
Professor Antonello Vicenzo
Dipartimento di chimica, materiali e ingegneria chimica "Giulio Natta", Politecnico di Milano
Interests: applied electrochemistry; Electrochemical Energy Storage; Electrochemical capacitors; supercapacitors; capacitive deionization; aqueous rechargeable batteries; anodic oxide; Electrodeposition; thin film deposition
Dr. Paola Vivo
Faculty of Engineering and Natural Sciences, Tampere University, P.O. Box 541, 33101 Tampere, Finland
Interests: Photovoltaics; photophysics; Perovskite; organic and inorganic semiconductors
Professor Petrica VIZUREANU
Technical University Iasi, Romania
Interests: geopolymer; biomaterials; corrosion of dental alloys; material characterisation; cytotoxicity; Powder Metallurgy; slm; innovative composite materials; Solar cells; metals and alloys; metallurgy, steel heat treatment; waste materials processing; expert system; Titanium alloys; high entropy alloys; concretes with fly ash addition exposed to various types of loads (mechanical; thermal; corrosion); coatings; cobalt alloys
Dr. Joachim Vollbrecht
Soft Matter Physics, Institut für Physik und Astronomie, Universität Potsdam
Interests: Solar cells; electroluminescence; recombination dynamics of organic photovoltaic devices; photodetectors, organic electronics, solar radiation
Dr. V. A. Volochaev
Southern Federal University
Interests: powder X-ray diffraction; crystal chemistry; solid state chemistry; Solid State Electrochemistry; nanostructured materials; platinum catatalysts; PEMFCs
Dr. Franz Weber
Center of Dental Medicine, Oral Biotechnology & Bioengineering/MKG, University of Zurich, Plattenstrasse 11, , CH-8032 Zurich, Switzerland
Interests: hydrogels; bone substitute materials; additive manufacturing; GTR/GBR membranes; osteoconduction; osteoinduction; delivery of epigenetically active small chemicals; delivery of BMPs
Dr. Agnieszka Woszuk
Department of Geotechnical Engineering, Civil Engineering and Architecture Faculty, Lublin University of Technology, Lublin, Poland
Interests: Rheological of asphalt binders • Industrial materials; • Waste of mineral processing; • Road application; warm mix asphalt; , asphalt, materials engineering; sustainability; waste recycling
Professor Piotr Paweł Woyciechowski
Department of Building Materials Engineering, Faculty Of Civil Engineering, Warsaw University of Technology
Interests: advanced concrete technology; mineral binders - cements and other; durability of the concrete structures; chemical resistance of concrete; carbonation, curing of concrete; superabsorbent polymers in concrete; precast concrete elements production; waste and by-products use in mineral building materials production; recykling in concrete technology
Professor Yue Xiao
State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology (WUT), China
Interests: solid waste recycling in road engineering; road and pavement materials; asphalt pavement maintenance
Professor Chun-Liang Yeh
Department of Aerospace and Systems Engineering, Feng Chia University, Taichung, Taiwan
Interests: self-propagating high-temperature synthesis (SHS); thermite-based combustion synthesis; materials: borides, carbides, nitrides, silicides, and intermetallics; gas-phase flame synthesis; numerical model of SHS
Dr. Kirill Yusenko
Federal Institute for Materials Research and Testing Berlin, 12489 Berlin, Germany
Interests: x-ray diffraction; x-ray spectroscopy; in situ studies; high-pressure high-temperature studies
Professor Krzysztof Zakowski
Gdansk University of Technology, Department of Electrochemistry, Corrosion and Materials Engineering, Poland
Interests: corrosion; Materials Engineering; electrochemistry; anticorrosion protection; Cathodic Protection; stray currents; sacrificial anode
Professor Jarosław Żmudzki
Mechanical Technological Faculty, Department of Engineering Materials and Biomaterials, Silesian University of Technology, Gliwice, Poland
Interests: dental biomechanics; Finite Element Analysis (FEA); biomaterials and manufacturing technology; bite/occlusal/mastication forces; load distribution in dentures, denture reinforcement; dental implant and abutment screw failure, lubrication and wear in dentistry, soft tissue pressure pain threshold; hard and soft tissue behavior; bone plate fixation; mandible and temporomandibular joint (TMJ) biomechanics; bruxism and occlusion dysfunction treatment; TMJ replacement; maxillofacial surgery virtual planning; simulation in orthognathic surgery; bone and teeth fracture; mouthguard
Dr. Gaweł Żyła
Politechnika Rzeszowska, Rzeszow, Poland
Interests: nanofluids; nanosuspensions; nanoparticles; Rheology; thermal conductivity; heat transfer; Heat capacity; surface tension; mass density
Back to TopTop