Journal Menu
► ▼ Journal Menu-
- Materials Home
- Aims & Scope
- Editorial Board
- Reviewer Board
- Topics Board
- Instructions for Authors
- Special Issues
- Sections & Collections
- Article Processing Charge
- Indexing & Archiving
- Editor's Choice Articles
- Most Cited & Viewed
- Journal Statistics
- Journal History
- Journal Awards
- Society Collaborations
- Conferences
- Editorial Office
Journal Browser
► ▼ Journal BrowserNeed Help?
Sections - Materials
Biomaterials 1822 Articles
Prof. Dr. Aldo R. Boccaccini
Topical Collections (2)
-
Advanced Biomaterials for Cells Adhesion, Proliferation and Differentiation
(Collection Editor: Guoping Chen) -
Dental Biomaterials
(Collection Editor: Nikolaos Silikas)
Current Special Issues (262)
-
3D Printing for Dental Applications
(Editors: Celio G. Figueiredo-Pina, Ana Paula Serro) -
3D Printing in Medicine and Biomedical Engineering
(Editor: Filip Górski) -
Absorbable Metals for Biomedical Applications
(Editors: Hendra Hermawan, Mehdi Razavi) -
Additive Manufacturing (AM) of Biomaterials
(Editor: Cecilia Persson) -
Additive Manufacturing towards the Design of 3D Advanced Scaffolds for Tissue Engineering
(Editor: Roberto De Santis) -
Advanced Antimicrobial Materials
(Editors: Thibaud Coradin, Davy-Louis Versace) -
Advanced Bio-Based Polymers: Synthesis, Characterization and Applications
(Editors: Uroš Maver, Tina Maver) -
Advanced Biomaterials for Medical Applications
(Editor: Agnieszka J. Nowak) -
Advanced Biomaterials in Dentistry and Healthcare
(Editor: Gherlone Felice Enrico) -
Advanced Biomedical Hydrogels and Bioactive Materials in Medicinal Chemistry
(Editor: Bozena Tyliszczak) -
Advanced Biopolymer Materials: Preparation, Characterization and Applications
(Editors: Ewelina Jamróz, Pavel Kopel) -
Advanced Dental Implants and Prosthodontics Protocols and Materials: Simulation, Modeling, and Experimental Studies
(Editors: Sergio Caputi, Bruna Sinjari) -
Advanced Dental Materials for Periodontal and Bone Regeneration
(Editor: Georgios Romanos) -
Advanced Designs of Materials, Devices and Techniques for Biosensing
(Editors: Eugen Gheorghiu, Mihaela Gheorghiu) -
Advanced Materials and Operative Techniques in Oral and Maxillofacial Surgery
(Editors: Giuseppe Varvara, Maurizio Piattelli) -
Advanced Materials and Systems for Biomedical Application
(Editor: Ki Su Kim) -
Advanced Materials and Techniques in Oral Implantology
(Editors: Claudio Stacchi, Sergio Spinato) -
Advanced Materials for Oral Application
(Editors: Laura-Cristina Rusu, Lavinia Cosmina Ardelean) -
Advanced Materials for Restorative Dental Sciences
(Editor: Josephine F. Esquivel-Upshaw) -
Advanced New Materials and Equipments for Root Canal Treatment
(Editor: Won-Jun Shon) -
Advanced Platforms for Stem Cells Applications
(Editors: Guya Marconi, Francesca Diomede, Jacopo Pizzicanella) -
Advanced Polymer Composite Materials for Biomedical Applications
(Editor: Agnieszka Śmieszek) -
Advanced Polymeric Biomaterials: Preparation, Characterization and Applications (Second Volume)
(Editor: Magdalena Aflori) -
Advanced Progress in the Morphology and Surface of Dental Implant
(Editors: Gaetano Marenzi, Gianrico Spagnuolo) -
Advanced Restorative and Dental Materials: Biological, Physical, and Chemical Properties
(Editors: Claudio Poggio, Andrea Scribante) -
Advanced Topographical and Morphological Characterizations of Materials for Biomedical Applications
(Editors: Ştefan Ţǎlu, Sebastian Stach, Mihai Ţălu) -
Advances in Antibacterial Coatings
(Editor: Sergio Perero) -
Advances in Bacterial Cellulose Composites
(Editors: Cristina Elena Dinu-Pirvu, Lacramioara Popa, Mihaela Violeta Ghica) -
Advances in Bio-Inspired Materials for Medical Applications
(Editors: Barbara Drasler, Dedy Septiadi, Barbara Rothen-Rutishauser, Alke Petri-Fink) -
Advances in Bioactive Materials
(Editor: Ana Alcudia) -
Advances in Biological Nanomaterials
(Editor: Camelia Ungureanu) -
Advances in Biomaterials of Oral and Maxillofacial Surgery and Implant Dentistry
(Editor: Domenico Dalessandri) -
Advances in Biomaterials Towards Tissue Engineering
(Editors: Paweł Sajkiewicz, Dorota Kolbuk-Konieczny) -
Advances in Biomedical and Biomimetic Materials
(Editor: Ugo D'Amora) -
Advances in Bioprinting Techniques and Materials
(Editor: Andreas Blaeser) -
Advances in Bone Graft Materials
(Editor: Jung-Bo Huh) -
Advances in Dental Bio-Nanomaterials
(Editors: Joji Okazaki, Satoshi Komasa) -
Advances in Dental Composite Materials and Biomaterials
(Editor: Gabriel Furtos) -
Advances in Machining of Biomedical Tissues
(Editors: Naohiko Sugita, Liming Shu) -
Advances in Optical Sensors for Biomedical Applications
(Editor: Jeon Woong Kang) -
Advances in Oral Implants and Alveolar Bone Regeneration
(Editor: Silvio Mario Meloni) -
Advances in Periodontics and Restorative Dental Materials
(Editors: Stefania Bergamini, Carlo Bertoldi, Luigi Generali) -
Advances in Polymeric Biomedical Materials
(Editor: Shanfeng Wang) -
Advances in Polysaccharide Biomaterials—Volume II
(Editor: Yury A. Skorik) -
Advances in Smart Nanocarriers for Targeted Drug Delivery
(Editors: Nicola Margiotta, Michele Iafisco) -
Alloys for Biomedical Application
(Editor: Josef Stráský) -
Analysis of Peptidomimetic Toxicity in E. coli Bacterial Cells—Studies on Selected Strains
(Editor: Paweł Kowalczyk) -
Anti-Infective Materials
(Editors: Carla Renata Arciola, Lucio Montanaro, Davide Campoccia) -
Application of Nanoparticles as Biosensors in the Biomedical Field
(Editor: Taek Lee) -
Application of Natural Polymers in Bio-Based Products
(Editor: Reza Hosseinpourpia) -
Application of Scanning Probe Techniques in the Study of Biomaterials and Biomechanisms
(Editors: Claudio Canale, Ornella Cavalleri) -
Application of Selective Laser Sintering in Biomaterials
(Editor: Alida Mazzoli) -
Applications of Dental Biomaterials
(Editor: Mutlu Özcan) -
Behaviour of Dental Composite Materials
(Editor: Alexandra Totan) -
Bio-Binding Materials: Reactivity and Toxicity
(Editors: Vlad T. Popa, Aurica Precupas) -
Bio-Nanomaterials
(Editor: Anton Naumov) -
Bioabsorbable and Permanent Materials for Highly Loaded Implants
(Editor: Bernhard Mingler) -
Bioactive and Functional Materials
(Editors: Karla A. Batista, Kátia F Fernandes) -
Bioactive Dental Materials
(Editors: Tobias Tauböck, Matej Par) -
Bioactive Glasses in Tissue Engineering: Design, Processing and Application
(Editors: Fabian Westhauser, Isabel Gonzalo de Juan, Kunisch Elke) -
Bioactive Materials in Dentistry
(Editor: Ivana Miletić) -
Biobased Polymers
(Editor: Tomonari Tanaka) -
Bioceramic Composites for Biomedical Applications
(Editors: Pedro de Sousa Gomes, Maria Helena Fernandes) -
Bioceramics and Bioactive Glass-Based Composites
(Editor: Tatiana Safronova) -
Bioceramics: Bioinert, Bioactive, and Coatings
(Editor: Andrew Ruys) -
Bioceramics: Materials, Properties and Applications
(Editor: Frédéric Velard) -
Biocompatibility Evaluation of Dental Implants
(Editor: Mario Beretta) -
Biocompatible and Biodegradable 3D Scaffolds
(Editor: Adriana Kovalcik) -
Biocompatible Materials Investigated with Optical Methods
(Editor: Virgil-Florin Duma) -
Biocompatible Nanoparticles: Synthesis and Applications
(Editor: Anca Dinischiotu) -
Biodegradable and Biocompatible Polymer-Based Materials for Biomedical Engineering
(Editor: Giovanni Vozzi) -
Biodegradable Polymers: From Synthesis to the Market
(Editor: Paola Rizzarelli) -
Biofunctionalized Scaffold in Regenerative Medicine-Series II
(Editors: Francesca Diomede, Jacopo Pizzicanella) -
Biohybrid and Composite Materials
(Editors: Nonappa, Eduardo Anaya Plaza, Veikko Linko) -
Biological Materials in Health and Disease
(Editor: Dale Feldman) -
Biomaterials and Bio-Fabrication of Scaffolds for Tissue Engineering
(Editors: Ana Ferreira-Duarte, Piergiorgio Gentile) -
Biomaterials and Implant Biocompatibility (Second Volume)
(Editors: Anişoara Cîmpean, Florin Miculescu) -
Biomaterials and Molecular Imaging Materials for Biomedical Research
(Editors: Moonsuk Kim, Eunha Kim) -
Biomaterials and Technologies in Dentistry
(Editors: Rosalia Maria Leonardi, Gaetano Isola, Cristina Grippaudo) -
Biomaterials Development and Evaluation for Dentistry
(Editors: Eunice Carrilho, Mafalda Laranjo) -
Biomaterials for Bone Tissue Engineering 2020
(Editors: Nora Bloise, Lorenzo Fassina) -
Biomaterials for Bone Tissue Regeneration 2020
(Editor: Byung-Jae Kang) -
Biomaterials for Dental Healing
(Editor: Regina Maria Puppin-Rontani) -
Biomaterials for Medical and Dental Application
(Editor: Sung-Hwan Choi) -
Biomaterials for Regenerative Medicine and Drug Delivery
(Editor: Dagnija Loča) -
Biomaterials in Periodontology and Implantology
(Editor: Enrico Marchetti) -
Biomaterials of Microbial Origin for Tissue Engineering and Regenerative Medicine Applications
(Editor: Joaquim Miguel Oliveira) -
Biomaterials Performance in Clinical Cases and Failure Analysis of Implants
(Editors: Antoniac Iulian, Costache Victor Sebastian) -
Biomaterials used at Bioengineering and Medical Sciences from University of Messina in 2021
(Editors: Gabriele Cervino, Michele Gaeta, Giovanni Finocchio, Giacomo Risitano) -
Biomechanics and Mechanobiology at the Cell-Biomaterial Interface
(Editors: Alberto Rainer, Francesco Basoli) -
Biomimetic Multifunctional Composites for Hard Tissue Regeneration
(Editors: Maja Dutour Sikirić, Nabanita Saha) -
Biomineralization of Dental Tissue
(Editor: Song Je Seon) -
Biopolymer-Based Materials for Biomedical Engineering
(Editors: Joaquim Miguel Oliveira, Viviana Pinto Ribeiro, Rui L. Reis) -
Biopolymers 2021
(Editors: Guang Ren, Maurice N. Collins, Mario Culebras Rubio) -
Biopolymers for Potential Applications
(Editor: Federico Cerrone) -
Biopolymers: Synthesis, Properties and Biological Applications
(Editor: Beata Kaczmarek) -
Block Copolymers for Drug Carriers/Vehicles
(Editor: Kwon Taek Lim) -
Bone and Dental Implants
(Editor: Zeev Ormianer) -
Bone Graft for Bone Regeneration and Dental Implants
(Editor: Young-Kyun Kim) -
Bone Graft Materials
(Editor: Chang-Joo Park) -
Bone Regeneration Materials
(Editors: Andrea Ewald, Elke Vorndran) -
Carbon Nanotubes in Biomedicine
(Editor: Pilar López-Larrubia) -
Ceramic Dental Implants: Concept, Fabrication, Mechanical and Biological Properties
(Editors: Joana Mesquita-Guimarães, António Completo, David Herrera) -
Ceramic Materials for Dental Implant and CAD-CAM Prostheses
(Editor: Jung-Suk Han) -
Characterization and Behavior of Dental, Oral and Maxillo-Facial Reconstructive Materials
(Editors: Carlos E. Nemcovsky, Joseph Nissan) -
Characterization of Dental Implants
(Editor: Kyu-bok Lee) -
Characterization, Application and Potential Health Benefits of Bioactive Compounds
(Editor: Zorita Diaconeasa) -
Complex Biomaterials Systems and Their Applications
(Editor: Donghyun Lee) -
Composite and Polymeric Materials for Dentistry: Enhancing Antimicrobial and Mechanical Properties
(Editor: Grzegorz Chladek) -
Contemporary Dental Materials and Their Applications
(Editor: Deog-Gyu Seo) -
Contemporary Endodontic Materials
(Editor: Hyeon-Cheol Kim) -
Corrosion and Degradation Phenomena in Biomaterials
(Editors: Andrea Balbo, Federica Zanotto) -
Current and Future Trends in Dental Materials
(Editor: Gianrico Spagnuolo) -
Current and Future Trends in Orthodontic Materials
(Editor: Luca Contardo) -
Dental Biomaterials and Tissues
(Editors: Laurent Tapie, Jean-Pierre Attal) -
Dental Biomaterials: Imaging, Testing and Modelling
(Editors: Cinzia Maspero, Gianluca Tartaglia, Stephen Thaddeus Connelly) -
Dental Bulk-Fill Composite Resins
(Editor: Danijela Marović) -
Dental Implant Biomaterials
(Editor: María Piedad Ramírez Fernández) -
Dental Implant Biomaterials: In Vitro and In Vivo Simulations and Applications
(Editors: Gianmario Schierano, Giuliana Muzio) -
Dental Implants and Materials (Second Volume)
(Editors: Marco Cicciu, Marco Tallarico) -
Dental Implants in Oral Healthcare
(Editor: Gaetano Marenzi) -
Dental Implants: Materials and Design
(Editor: Jordi Gargallo) -
Dental Materials and Devices
(Editor: Guang Hong) -
Dental Materials Applied in Oral Health and Systemic Diseases
(Editors: Giuseppe Marzo, Stefano Mummolo) -
Dental Materials in Endodontic and Post-endodontic Therapy
(Editors: Marco Cicciù, Giuseppe Lo Giudice) -
Dental Materials in Modern and Contemporary Implant Dentistry
(Editors: Stefano Corbella, Silvio Taschieri) -
Design of Materials for Bone Tissue Scaffolds
(Editor: Antonio Boccaccio) -
Design, Processing and Properties of Scaffolds for Tissue and Organ Engineering
(Editor: Edgar B. Montufar) -
Drug Delivery Systems Based on Mesoporous Silica
(Editors: Miroslav Almasi, Virginie Hornebecq) -
Drug Delivery: Recent Developments and Future Prospects
(Editor: Marilena Vlachou) -
Eco-Friendly Bio-Based Polymer Materials
(Editor: Valérie Massardier) -
Electrospun Nanofibers in Healthcare: Structural and Biological Properties
(Editors: Célia Henriques, Jorge Carvalho Silva) -
Elements Content and Release from Tissues and Biomaterials in Vivo and in Vitro
(Editors: Mariusz Korczynski, Maciej Dobrzyński) -
Endodontics
(Editor: Edgar Schäfer) -
Engineering Biomaterials with Antimicrobial Properties
(Editors: Joana M. Silva, Rui L. Reis) -
Evaluation of Novel Biomaterials in Endodontics, Periodontics, and Restorative Dentistry
(Editor: Luciano Giardino) -
Fatigue Design of Dental Implant
(Editor: Mikel Abasolo) -
From Plant Cells to Bio-Based Materials: Processing and Biotechnological Routes for the Building of Functional Bio-Assemblies and Composite Structures
(Editors: Nicolas Le Moigne, Ingo Burgert, Johnny Beaugrand) -
Frontiers and Novel Applications in Advanced Autologous Constructs, Scaffolds and Innovative Materials for Dentistry and Oral Health
(Editors: Francesco Inchingolo, Gianna Dipalma) -
Frontiers in Functional Materials for Bioelectronics and Biosensors
(Editors: Zhou Li, Bojing Shi) -
Frontiers of Dental Materials in Prosthodontics
(Editor: Maria J. Suarez) -
Frontiers Research in Biomechanics and Rehabilitation Engineering
(Editors: Francisco Romero-Sánchez, David Rodríguez Salgado, Rosa Pàmies-Vilà) -
Frontiers Research in Dental Materials
(Editor: Antonella Polimeni) -
Functional Biomaterials Scaffolds and Biocompatibility
(Editor: Maria Chatzinikolaidou) -
Functional Materials in Biomedical Applications
(Editor: Daniela Berger) -
Functional Materials/Surfaces in Biomedical Applications
(Editors: Rumen Krastev, Xin Xiong) -
Functional Nanomaterials and Biopolymers for Precision Medicine
(Editor: Nicolò Mauro) -
Functional Stimuli-Responsive Polymeric Materials for Optical and Biomedical Applications
(Editor: Radu-Dan Rusu) -
Functionalized Graphene Derivatives: Structure, Properties and Biological Applications
(Editors: Alessandra Zicari, Marco Tafani) -
Future Trends in Materials for Biomedical Applications
(Editors: Daniela Iannazzo, Alessandro Pistone) -
Future Trends in Materials for Tissue Engineering Applications
(Editor: Daniela Iannazzo) -
Future Trends of Micro and Nanocomposites in Dentistry
(Editors: Nikolaos Silikas, Paulo Francısco Cesar) -
Graphene-enriched Biomaterials and Biomedical Applications
(Editors: Susi Zara, Marialucia Gallorini) -
Hydrogel Biomaterials: Present and Future Challenges
(Editor: Hyun Jong Lee) -
Hydrogels and Their Biomedical Applications
(Editor: Assunta Borzacchiello) -
Hydrogels in Biology and Medicine
(Editors: Eleonora Russo, Carla Villa) -
Hydrogels: Preparation, Characterization, and Applications
(Editor: Evangelos Delivopoulos) -
Hydroxyapatite-Based Materials for Medicine and Environmental Protection Applications
(Editor: Gabriela Ciobanu) -
Influence of Nanomaterials on Biological Processes In Vitro and In Vivo
(Editor: Zbigniew Rybak) -
Innovative Dental Materials in Pediatric and Preventive Dentistry
(Editor: Maurizio Bossu) -
Magnetic Techniques for Molecular Diagnostics and Analysis of Biomolecules
(Editor: Joerg Schotter) -
Materials and Devices for Drug Delivery—Applications and Methods of Evaluation
(Editors: Piotr Kulinowski, Przemysław Dorożyński) -
Materials and Technology for Regenerative Medicine
(Editors: Ewa Stodolak-Zych, Maciej Boguń) -
Materials for Hard Tissue Repair and Regeneration
(Editor: Keisuke Nakano) -
Materials for Skin Tissue Engineering
(Editors: Paula Coutinho, Maximiano Ribeiro) -
Materials in Cell Therapies and Cell Manufacturing
(Editor: Jorge Almodovar) -
Materials in Dental and Life Sciences
(Editor: Hyeon-Cheol Kim) -
Mechanical Properties and Microstructures of Glass-Ionomer Cements
(Editors: Beata Czarnecka, DDS, PhD, John W. Nicholson, DSc, PhD) -
Mechanical Properties of Biocomposites
(Editors: Juan Carlos Del Real-Romero, Eva Paz Jiménez, Juana Abenojar Buendia) -
Micro- and Nanoparticles in Biomedical and Cosmetic Applications
(Editor: Justyna Kozlowska) -
Micro/Nano Materials, Devices, and Systems for Biomedical Applications
(Editors: Jungkwun Kim, Albert Kim) -
Microstructural and Mechanical Characterization of Materials for Biomedical Applications
(Editors: Artemis Stamboulis, Besim Ben-Nissan) -
Modelling Polysaccharides-Based Hydrogels: From Preparation to Biomedical Applications
(Editors: Domenico Russo, Luciana Sartore, Gina Lisignoli) -
Modulation of Antibiotics and Anticancer Drugs Activity by Biocompatible Nanoparticles
(Editors: Maxim Evstigneev, Jacek Piosik, Yuriy Prylutskyy) -
Multifunctional Coatings for Bone Regenerative Medicine
(Editor: Saber AminYavari) -
Multifunctional Organic-Inorganic Hybrid Materials for Therapy, Diagnosis and Regenerative Medicine
(Editors: Sabrina Conoci, Antonino Mazzaglia, Valentin Alek Dediu) -
Nanobiomaterials in Microbiology and Immunology
(Editors: Alina Maria Holban, Veronica Lazar) -
Nanomaterials Design towards Biomedical Applications
(Editors: Barbara Stella, Silvia Arpicco) -
Nanomaterials for Targeted Photodynamic Therapy
(Editor: Nadir BETTACHE) -
Nanoparticles for Biomedical Application
(Editor: Ana Figueiras) -
Natural History Collections as Inspiration for Biomaterials and Technology
(Editors: David W. Green, Gregory Shaun Watson, Jolanta Anna Watson) -
Naturally Derived Biomaterials for Regenerative Medicine Applications
(Editors: Agata Przekora, Aneta Zima) -
New Advances in Electrochemical Biosensors
(Editor: Luisa Pilan) -
New Advances in Mechanical Behaviour of Biomaterials
(Editor: Reza Hashemi) -
New Frontiers in the Field of Materials and Technologies in Orthodontics
(Editor: Marco Portelli) -
New Implant Materials
(Editor: Filiberto Mastrangelo) -
New Insights into Hybrid Biomaterials
(Editors: Vassilios Roussis, Efstathia Ioannou, Leto-Aikaterini Tziveleka) -
New Materials and Techniques for Orthodontics
(Editors: Maria Francesca Sfondrini, Andrea Scribante) -
New Trends in Bioprinting
(Editors: Carmelo De Maria, Giovanni Vozzi, Thomas Boland) -
Noble-Metal Nanoparticles: Design, Characterization, and Biomedical Applications
(Editors: Laura Polito, Marcello Marelli) -
Novel Advances and Approaches in Biomedical Materials Based on Calcium Phosphates (Second Volume)
(Editor: Michael R. Mucalo) -
Novel Biomaterials and Technology for Dental Clinical Applications
(Editor: Giovanna Orsini) -
Novel Biomaterials for Diseases Detection, Monitoring or Treatment
(Editor: Tania Betancourt) -
Novel Biomaterials for Orthopaedic/Musculoskeletal Tissue Engineering
(Editor: Joanna Kolmas) -
Novel Biomaterials for Soft and Hard Tissue Regeneration
(Editor: Linh Nguyen) -
Novel Biomedical Imaging Modalities and Agents
(Editor: Changho Lee) -
Novel Biomedical Materials: Surface Modification and Biological Applications
(Editors: Bernard Martel, Nicolas Blanchemain) -
Novel Ceramic Composite Biomaterials Used in the Orthopedic Field and Interest of the National Registers in Total Joint Arthroplasties
(Editors: Domenico Tigani, Saverio Affatato) -
Novel Dental Restorative Materials
(Editor: Nicoleta Ilie) -
Novel Diagnostic Methods for Biological Material and Biomaterial Characterization
(Editor: Vassilis Papadakis) -
Novel Fluorescent Materials and Nanomaterials for Biomedical Applications
(Editor: Dokyoung Kim) -
Novel Image Analysis for Dental Materials Application
(Editors: Dobó Nagy Csaba, Balázs Benyó) -
Novel Load Systems for In Vitro Testing of Biomaterials and Medical Devices
(Editors: Cristina Bignardi, Mara Terzini) -
Novel Materials for Antimicrobial Application
(Editor: Alina Holban) -
Novel Materials in Dentistry and Medical Applications
(Editor: Maria Greabu) -
Novel Resin Composites and Biomaterials
(Editors: Yasushi Shimada, Alireza Sadr) -
Numerical and Biomechanical Analysis in Bioengineering
(Editor: Marcin Kozakiewicz) -
Oral and Biotechnological Materials
(Editors: Michele D’Attilio, Francesca Diomede, Jacopo Pizzicanella) -
Photosensitive Nanomaterials for Biomedical Applications
(Editor: Janusz M. Dąbrowski) -
Physical Properties and Biocompatibility of Restorative Dental Materials
(Editor: Domagoj Glavina) -
Polymer Biomaterials for Bone Regeneration
(Editor: Takahiro Kanno) -
Polymer-Based Biomaterials and Tissue Engineering
(Editors: Roser Sabater i Serra, Ángel Serrano-Aroca) -
Polymer-Based Nanoparticles for Drug Delivery Applications
(Editor: Pedro Fonte) -
Polymers for Medical Applications
(Editor: Suk Ho Bhang) -
Properties of Dental Restorative Materials
(Editor: Leszek Klimek) -
Protein Adsorption on Materials and Its Applications
(Editor: Sebastien Balme) -
Recent Advances and Developments in Composite Dental Restorative Materials
(Editors: Jean-Pierre Attal, Elisabeth Dursun) -
Recent Advances in 3D Printing for Biomaterials
(Editor: Ulrike Ritz) -
Recent Advances in Novel Biomaterials for Tissue Repair and Tissue Engineering
(Editor: Verónica Gómez-Gil) -
Regenerative-Active Biomaterials and Biomedical Applications
(Editors: Xiaohong Wang, Heinz C. Schröder, Werner Müller) -
Research Advances in Natural Polymer-Based Hydrogels
(Editor: Diana Ciolacu) -
Research of Organic Chemical Molecules and Materials for Biological Applications
(Editor: Shin-ichi Kawaguchi) -
Research on the Properties of Dental Composites
(Editor: Diana Dudea) -
Resin-Based Composite Materials for Restorative Dentistry
(Editors: Yooseok Shin, Dohyun Kim, Sung-Ho Park) -
Scaffolds for Bone Tissue Engineering
(Editors: Susana Sousa, Fernando Jorge Monteiro) -
Self-Assembled Block Copolymers for Drug Delivery
(Editor: Arkadiusz Orchel) -
Self-Assembly and Medical Applications of Polymer Materials
(Editor: Jianqiang Hu) -
Self-Organization and Spontaneous Order for Functional Materials
(Editors: Takahiko Ban, Hideki Nabika, Takahiro Nakamura) -
Silk-Based Biomaterials
(Editor: Hanna Dams-Kozłowska) -
Smart & Biomimetic Tissue Engineering Scaffolds: Bioinspired Design, Innovative Modeling, and Production Strategies
(Editor: Andres Diaz Lantada) -
Smart Nanomaterials: Molecular Design for Advanced Medicine
(Editors: Giuseppina Luciani, Brigida Silvestri) -
Soft Materials
(Editor: Stephan Rudykh) -
Spotlight on Bioactive Glasses 2020
(Editor: Valeria Cannillo) -
State-of-the-art Biomaterials in Korea
(Editors: Sung-Hwan Choi, Jae Sung Kwon, Junghwan Lee, Dohyun Kim) -
Stimuli-Responsive Hydrogels and Microgels
(Editor: Silvia Corezzi) -
Structure-Property Relationships in Polymer Networks and Related Materials for Dental and Medical Application
(Editor: Izabela Barszczewska-Rybarek) -
Structure, Properties and Applications of Biocomposites
(Editors: Mohamed-Nur Abdallah, Marco Laurenti, Zeeshan Sheikh) -
Surface Functionalization of Dental Biomaterials
(Editors: Guido Macchiarelli, Sara Bernardi) -
Surface Modification of Dental Materials and Tissues
(Editor: Júlio C. M. Souza) -
Surface Modifications and Coatings for Bioactive Implants
(Editor: Seong-Kyun Kim) -
Surface Treatment of Implant Materials
(Editor: Ikiru Atsuta) -
Synthesis and Characterization of Biopolymeric Nanoparticles for Drug Delivery Applications
(Editor: Cleofe Palocci) -
Synthetic and Biologic Materials for Prosthetic and Reconstructive Applications for Musculoskeletal Tissue
(Editors: Dante Dallari, Marco Govoni) -
Targeted Drug Delivery
(Editors: António Paulo, Paula Campello) -
The Application of New Organic Materials in Biology
(Editors: Elżbieta Wojaczyńska, Jacek Wojaczyński) -
The Synthesis and Characterization of Biocompatible Materials
(Editors: Florin Miculescu, Anişoara Cîmpean) -
Tissue Regeneration in Dentistry: From Biomaterials to Stem Cell Therapy
(Editor: Ruggero Rodriguez) -
Titania-Based Materials for Medical Applications
(Editors: Piotr Piszczek, Aleksandra Radtke) -
Titanium and Titanium Based Materials in Biomedical Applications
(Editor: Jae Sung Kwon) -
Translational Research on Dental Materials
(Editor: Michael Gasik) -
Zirconia and Innovative Biomaterials for Dental and Biomedical Applications
(Editors: Sangwon Park, John G. Fisher) -
Zirconia Implants: Current Status and Future Prospects
(Editor: Jens Fischer)
Energy Materials 620 Articles
Topical Collections (1)
-
Materials and Technologies for Hydrogen and Fuel Cells
(Collection Editors: Antonino Salvatore Aricò, Vincenzo Baglio, Francesco Lufrano)
Current Special Issues (90)
-
Advanced Battery Materials-2021
(Editor: Yongchang Liu) -
Advanced Energy Storage Materials for Batteries
(Editor: Liangming Wei) -
Advanced Functional Materials for Solid Oxide Electrochemical Cells
(Editor: Dmitry Medvedev) -
Advanced in Ferroelectrics and Piezoelectric Composites
(Editor: Cristina Elena Ciomaga) -
Advanced Materials and Devices for Energy Harvesting
(Editor: Xiangyu Chen) -
Advanced Materials for Catalysis and Electrochemical Energy Conversion
(Editors: Laura Calvillo, Veronica Celorrio) -
Advanced Materials for CO2 Conversion
(Editor: Vicente Montes) -
Advanced Materials for Electrochemical Energy Conversion and Storage Devices
(Editors: Diogo Miguel Franco dos Santos, Biljana Šljukić) -
Advanced Materials for Thermal Energy Storage
(Editors: Francisco de Paula Montero Chacón, Juan Carlos Serrano-Ruiz) -
Advanced Solid Electrolytes for Solid-State Batteries
(Editor: Henghui Xu) -
Advances in Ceramics and Glass: Processing, Sintering, Properties and Applications
(Editor: Vincenzo M. Sglavo) -
Advances in Eco-Friendly Adsorbent Materials for Removal of Inorganic and Organic Pollutants
(Editor: Katarzyna Szewczuk-Karpisz) -
Advances in Energy Materials Surface and Interface Analysis
(Editors: Florian Hausen, Rui Wen) -
Advances in Flexible Thermoelectric Materials and Devices
(Editor: Yubo Luo) -
Advances in ORR & OER Electrocatalysts
(Editor: Diana M. Fernandes) -
Advances in Photovoltaic Materials
(Editor: Ewa Klugmann-Radziemska) -
Advances in Photovoltaics
(Editor: Makoto Karakawa) -
Advances in Protonic Ceramic Electrochemical Cells
(Editors: Aleksandra Mielewczyk-Gryń, Ragnar Strandbakke) -
Advances in Quantum Science
(Editor: Enrico Prati) -
Advances in Silicon Solar Cells
(Editor: Han-Don Um) -
Advances in Thermoelectric Materials
(Editor: Yaniv Gelbstein) -
Application of Carbon-Based Materials in Batteries
(Editor: Jiafeng Zhang) -
Applications of Atmospheric Pressure Plasma in Energy Harvesting and Storage Devices
(Editor: Jian-Zhang Chen) -
Battery Technology and Materials Development for Grid Energy Storage
(Editors: Guosheng Li, Vincent Sprenkle) -
Composites for Energy Harvesting, Generation and Energy Storage
(Editor: Renato Gonçalves) -
Development of Energy Storage Devices
(Editor: Daisuke Tashima) -
Direct Conversion of Light into Mechanical Work: Theory, Applications and Perspectives
(Editor: Riccardo Castagna) -
Electrochemical Materials in Batteries
(Editor: Carlos Fernandez) -
Electrode Materials for Advanced Photo-Supercapacitors
(Editors: Mariusz Szkoda, Konrad Trzciński) -
Emerging Materials and Systems for Electrochemical Energy Storage Application
(Editor: Dongfeng Xue) -
Emerging Photovoltaic Materials and Solar Cells
(Editor: Marek Lipiński) -
Engineering Properties of Superconducting Materials (Second Volume)
(Editor: Tim Coombs) -
Feature Papers in Energy Materials
(Editor: Aleksey Yaremchenko) -
Functional Materials for Energy Conversion and Storage
(Editor: Sima Aminorroaya Yamini) -
High-Performance Thermoelectric Materials
(Editor: Il-Ho Kim) -
Hybrid Nanocomposites for Wearable, Energy and Environmental Applications
(Editor: Sunghoon Park) -
Hydrides-based Hydrogen and Heat Storage Materials, Technologies and Applications
(Editor: Marek Polanski) -
Hydrogen Storage and Fuel Cells: Materials, Characterization and Applications
(Editor: Rolando Pedicini) -
Hydrogen Storage in Metal Hydrides and Related Materials
(Editors: Karol J. Fijałkowski, Tomasz Jaroń) -
Innovation and Application of Advanced Electrochemical Materials
(Editor: Andrea Straková Fedorková) -
Low-Loss Nonoriented Electrical Steel Sheet for Energy-Efficient Electrical Drives
(Editor: Rudolf Kawalla) -
Materials and Components for Solid Oxide based Electrochemical Cells
(Editor: Massimiliano Lo Faro) -
Materials Design for Energy Conversion and Storage
(Editor: Inho Nam) -
Materials for Organic and Perovskite Solar Cells
(Editor: Paola Vivo) -
Materials for Photovoltaic Applications, Volume II
(Editor: Gregory J. Wilson) -
Materials for Residential Electrochemical Energy Storage Systems
(Editor: Jean François Drillet) -
Materials for Solar Photovoltaic Applications
(Editors: Lucjan Jacak, Witold A. Jacak) -
Mechanics and Thermodynamics of Materials
(Editor: Róbert Kovács) -
Metal and Intermetallic Hydrides for Hydrogen Storage
(Editor: Eli Grigorova) -
Metal Oxides for Heterogeneous Catalysis
(Editors: Nikolaos D. Charisiou, Kyriaki Polychronopoulou, Maguy Abi Jaoude) -
Metal-Organic Frameworks towards Energy Conversion and Storage
(Editor: Seong Huh) -
Modern Material Solutions in Hydrogen Technologies
(Editor: Renata Włodarczyk) -
Multilayer Polymer Composites for High Energy Density Capacitors
(Editor: Mason A. Wolak) -
Multiscale Modeling of Energy Materials
(Editors: Hossein Mirhosseini, Thomas D. Kühne) -
Nano-Chemical Mechanics in Deformation and Fracture
(Editor: Elias C. Aifantis) -
Nanostructured Materials for Electrochemical Energy Storage
(Editors: Christian M. Julien, Boris Markovsky) -
New Advances in Ionic Liquids
(Editors: Renata Costa, Carlos Pereira) -
New Energy Storage Materials for Rechargeable Batteries
(Editor: Jinkui Feng) -
New Hole Transporting Materials for Perovskite Solar Cells
(Editor: Cristina Roldán Carmona) -
New Intermetallics and Hydride Materials for Hydrogen Storage and Battery Applications
(Editors: Fermin Cuevas, Tayfur Ozturk) -
New Trends in Solar Energy Materials: Characterization, Properties and Applications
(Editors: Fernando B. Naranjo, Susana Fernández) -
Novel Electroceramic Materials: From Preparation to Applications
(Editor: Michał Mosiałek) -
Novel Materials and Processes for Application in Nuclear Fuel Disposal
(Editor: Edgar C. Buck) -
Novel Nanomaterials for Energy Storage
(Editor: Cezar Comanescu) -
Organic Materials for Solar Energy
(Editor: Antonio Cardone) -
Oxide-Based Materials for Energy Storage and Conversion
(Editor: Jose Manuel Porras-Vazquez) -
Papers from The II Meeting on Electrochemical Energy Conversion and Storage Devices
(Editor: Pablo A. García-Salaberri) -
Phase Change Materials for Thermal Energy Storage
(Editor: Uroš Stritih) -
Progress in Organic and Hybrid Photovoltaics: Research and Applications
(Editor: Luiz Fernando Ribeiro Pereira) -
Recent Advances and Challenges in Carbon Fuel Cells
(Editor: Renata Włodarczyk) -
Recent Development in Dye-Sensitized and Organic Solar Cells
(Editor: Waldemar Stampor) -
Recent Developments in Phase Change Materials for Energy Storage Applications
(Editor: Roberto Palma) -
Recent Progress in Electrode Materials and Electrolytes for Li-air Batteries
(Editors: Alberto Vertova, Eleonora Pargoletti) -
Recent Progresses in Thermoelectric Materials
(Editor: Hsin-Jay Wu) -
Recovery and Treatment of Solid Waste
(Editors: Rossana Bellopede, Lorena Zichella) -
Recycling of Crystalline Silicon Solar Cells
(Editor: Ewa Klugmann-Radziemska) -
Research on Perovskite Materials and Optoelectronic Devices
(Editor: Himchan Cho) -
Smart Materials and Devices for Energy Harvesting
(Editor: Daniele Davino) -
Sustainable Development and Applications of Fuel Cells
(Editor: Carmen M Fernandez-Marchante) -
Sustainable Reactive Processing of Raw Materials and Polymer Compounds
(Editor: Uwe Gohs) -
Synthesis and Processing of Advanced Ceramics
(Editor: Lavinia Petronela Curecheriu) -
Synthesis, Characterization and Application of Powder Materials in Batteries
(Editor: Alessandro Dell'Era) -
Synthesis, Structure, and Spectral Properties of Perovskite Materials
(Editors: Przemysław Dereń, Bartosz Bondzior, Karol Lemański, Dagmara Stefańska) -
Theoretical Calculation and Simulation of Energy Materials
(Editor: Shiyu Du) -
Thermoelectric Materials and Applications for Energy Harvesting Power Generation
(Editor: Sang-il Kim) -
Thin Films for Energy Production and Storage
(Editors: Alessia Le Donne, Vanira Trifiletti) -
Transition Metal-Based Luminescent Materials and Their Applications
(Editors: Matteo Mauro, Cristina Cebrián Ávila) -
Two-Dimensional Materials in Solar Cells
(Editors: Pescetelli Sara, Antonio Agresti)
Advanced Composites 1016 Articles
Prof. Dr. Alessandro Pegoretti
Topical Collections (1)
-
Advances in Natural Fiber Reinforced Polymer and Geopolymer Composites: Synthesis, Applications and Future Directions
(Collection Editor: It-Meng (Jim) Low)
Current Special Issues (139)
-
Additive Manufacturing of Fiber Composites
(Editors: Adi Adumitroaie, Paolo Colombo) -
Advanced Composite Materials and Structures for Aerospace, Automotive and Civil Engineering Applications
(Editor: Sotirios A. Grammatikos) -
Advanced Composite Materials: Theory, Design and Applications
(Editor: Luigi Solazzi) -
Advanced Composites: From Materials Characterization to Structural Application (Second Volume)
(Editor: Viktor Gribniak) -
Advanced Functional Materials for Biomedicinal Applications
(Editor: Silvie Rimpelová) -
Advanced Materials for Aerospace Engineering
(Editor: Gennaro Scarselli) -
Advanced Optical Polymers: Synthesis, Characterization, and Applications
(Editors: Beata Podkościelna, Malgorzta Gil-Kowalczyk) -
Advanced Organic Functional Materials
(Editors: Adam Marek Pieczonka, Grzegorz Mlostoń, Marcin Jasiński) -
Advanced Polymer Matrix Nanocomposite Materials
(Editors: Michał Strankowski, Józef Tadeusz Haponiuk) -
Advanced Polymeric Materials and Nanocomposites for Green Plastics and Biodegradable Packaging
(Editor: Valentina Siracusa) -
Advanced Restorative Dental Composite Resins: Research and Development
(Editor: Sufyan Garoushi) -
Advanced Techniques for Characterising Mudrocks
(Editor: Jim Buckman) -
Advances in Aluminum: Present and Future Challenges
(Editors: Gloria María Pena Uris, Ricardo Fernández Serrano) -
Advances in Development and Processing of Poly(Lactic Acid) Composites
(Editor: Mateusz Barczewski) -
Advances in Fiber-Reinforced Polymer Composites
(Editor: Sylwester Samborski) -
Advances in Fire Retardant Materials
(Editors: Michael Försth, Oisik Das) -
Advances in Metal and Ceramic Matrix Composites
(Editor: Katarzyna Konopka) -
Advances in Metallic Glass Matrix Composites
(Editor: Daniel Şopu) -
Advances in Multifunctional and Self-Responsive Materials—Technologies and Applications
(Editors: Giuseppina Barra, Massimo Viscardi, Letizia Verdolotti) -
Advances in Nanocomposite Polymer Fibers
(Editor: Elena M. Ivan'kova) -
Advances in Printing Graphene and Other 2D Materials
(Editor: Khaled Parvez) -
Application of Amorphous Alloys: Potential and Challenges to Overcome
(Editor: Sung Woo Sohn) -
Application of Carbon Filled Nanocomposites
(Editor: Fawad Inam) -
Applications of Novel Biodegradable Polymeric Materials
(Editors: Joanna Rydz, Marta Musioł) -
Biomimetic Composites and Design
(Editor: Parvez Alam) -
Biorheology at Micro- and Macro-Scales
(Editor: Laura Campo-Deaño) -
Carbon Compounds-Reinforced Ceramics
(Editor: Felipe Gutiérrez-Mora) -
Carbon Fiber Reinforced Polymers
(Editor: Francesca Lionetto) -
Characterisation and Constitutive Modelling of Polymers and Polymeric Composites
(Editor: Daniel Garcia-Gonzalez) -
Characterization and Mechanics of Fiber-Reinforced Polymer Matrix Composites
(Editor: Michael May) -
Composite Materials for Nearly Zero Emission Applications
(Editors: Robert Böhm, Hubert Jäger) -
Composite Materials: New Design Trends, Interphase Characterization and Lifecycle
(Editors: Beata Strzemiecka, Łukasz Klapiszewski, Mohamed M. Chehimi) -
Composites Materials for Aeronautical Structural Application
(Editor: Francesco Marulo) -
Crystallization and Ionic Conductivity of Compound Glasses
(Editor: Young-Hoon Rim) -
Current Approaches on Bio-based Fiberboard Materials
(Editor: Sung Phil Mun) -
Design and Manufacturing of Composite Structures
(Editor: Jüri Majak) -
Design, Properties and Processing of Novel Composites
(Editor: Anton Smirnov) -
Development and Application of Amorphous Alloys and Their Composites
(Editor: Guoqiang Xie) -
Development and Application of Polymers and Composites for Leather and Fabric
(Editor: Anna Bacardit Dalmases) -
Development of Advanced Materials and Technologies for Leather and By-Products Processing
(Editors: Carmen Gaidau, Anna Bacardit Dalmases) -
Electromagnetic Absorbing Materials
(Editors: Jesús López, Pilar Marín, Elena Navarro) -
Environmentally Friendly Polymeric Blends from Renewable Sources
(Editors: Barbara Gawdzik, Olena Sevastyanova) -
Fabrication and Application of Electrically Conducting Composites
(Editor: Andrzej Katunin) -
Fabrication and Machining of Metal Matrix Composites
(Editor: Anna Janina Dolata) -
Fabrication, Characterization and Application of High-Energy Material
(Editor: Aleksander B. Vorozhtsov) -
Fabrication, Characterization, and Application of Polymeric Nanocomposites
(Editor: Chang-Soo Lee) -
Feature Collection in Advanced Composites Section
(Editors: Alessandro Pegoretti, Rani F El Elhajjar) -
Flame Retardants for Polymeric Materials
(Editors: Vera Realinho, Laia Haurie) -
Functional Composite Biomaterials
(Editor: Agnieszka Sobczak-Kupiec) -
Functional Fiber Materials and Composites
(Editor: Jaehyeung Park) -
Functional Inks: Formulation, Characterization and Printing Techniques
(Editor: Francisco Galindo-Rosales) -
Functionally Graded Materials: Developments and Applications
(Editor: Maria Amélia Ramos Loja) -
Functionally Graded Materials: Structures, Properties, and Applications
(Editor: Hideaki Tsukamoto) -
Graded Metal Matrix Composites: Additive Manufacturing, Properties and Applications
(Editor: Igor V. Shishkovsky) -
Green Composites: Challenges and Opportunities
(Editors: Marco Morreale, Roberto Scaffaro) -
High Performance Ceramics
(Editors: Alexandre Maitre, Sylvie Foucaud) -
High Performance Natural Fibre Composites
(Editors: Darshil U. Shah, Mike Clifford) -
Hybrid Magnetic Nanocomposites
(Editor: Michał Szuwarzyński) -
Hydroxyapatite Composite: Development, Fabrication and Characterization
(Editors: Daniela Predoi, Mircea Beuran, Simona Liliana Iconaru, Carmen Steluta Ciobanu) -
Impact Damage and Mechanical Analysis of Thin-Walled Composites
(Editor: Tomasz Kubiak) -
Influence of Fillers on Thermal Properties and Flammability of Polymer Composites
(Editor: Witold Żukowski) -
Innovative Applications of Materials to Industrial Design
(Editor: Fernando Julian) -
Interaction of Gaseous Plasma with Polymers and Polymer Composites
(Editor: Miran Mozetič) -
Lactoferrin-Based Composites for Biomedical Applications
(Editors: Anca Roşeanu, Robert W. Evans) -
Lightweight Structural Materials for Automotive and Aerospace
(Editor: Frank Czerwinski) -
Lipid and Detergent Related Materials for Drug Delivery
(Editor: Aleksander Czogalla) -
Magnetic Responsive Materials for Tissue Engineering and Antimicrobial Applications
(Editors: Margarida M. Fernandes, Clarisse Ribeiro) -
Manufacturing Engineering and Mechanical Properties of Composite Materials
(Editor: Aminul Islam) -
Material Science and Engineering in Romania
(Editors: Sergiu Coseri, Mariana Cristea, Violeta Melinte) -
Mechanical Alloying and Powder Compaction of Crystalline and Amorphous Composites
(Editor: Dariusz Oleszak) -
Mechanical Behavior of Composite Materials
(Editor: Jaime Viña) -
Mechanical Characterization of FRP Composite Materials
(Editor: John Montesano) -
Mechanical Properties and Recycling of Biopolymer Composites
(Editor: Stanisław Kuciel) -
Mechanics and Structural Analysis of Viscoelastic Composites
(Editor: Stefano Valvano) -
Metal and Polymer Matrix Composites: Processing and Applications
(Editor: Igor V. Shishkovsky) -
Modification and Processing of Biodegradable Polymers
(Editor: Krzysztof Moraczewski) -
Morphology, Flammability, Thermal and Mechanical Properties of Polymer Composites
(Editor: Przemysław Rybiński) -
Multifunctional and Protective Textiles
(Editor: Savvas Vassiliadis) -
Multifunctional Materials: Design, Synthesis and Properties
(Editor: Sergio González Sanchez) -
Multiobjective Design Optimization of Sandwich-Structured Composites and Their Mechanical Properties
(Editor: Krzysztof Jamroziak) -
Multiscaling in Polymer Composite Materials
(Editors: Seeram Ramakrishna, Filippo Berto, Sergey Panin) -
Nano Particles and Fiber Reinforced Materials in Dentistry
(Editors: Paola Gandini, Andrea Scribante) -
Nano-Composite Coatings: Processing, Characterization, Properties, and Applications
(Editor: Valentin Raditoiu) -
Nanocomposite Magnetic Materials for Energy Conversion
(Editors: Aleksandra Kolano-Burian, Łukasz Hawełek) -
Nanocomposite Membranes for Water Treatment
(Editor: Jieun Lee) -
New Compounds, Materials and Extracting Systems
(Editor: Karolina Wieszczycka) -
New Findings of Fiber Reinforced Composite Laminates
(Editors: Jarosław Bieniaś, Barbara Surowska) -
New Organosilicon and Hybrid Materials – Synthesis, Physicochemical Properties and Applications
(Editor: Anna Kowalewska) -
New Trends in Ferroelectric Nanocomposites Materials: Characterization, Properties and Applications
(Editors: Vladimir Shvartsman, Maxim Silibin) -
New Trends in Polymeric and Biocomposite Material Applications
(Editor: Giuseppe Lamanna) -
Non-Destructive Evaluation of Composite Materials
(Editor: Antonio Pantano) -
Non-Destructive Testing Methods for Composite Materials
(Editors: Renaldas Raišutis, Luca De Marchi) -
Novel Ceramic Materials for the Energy Transition
(Editor: Jesus Gonzalez-Julian) -
Novel Hybrid Hydrogels for Bone Tissue Engineering Applications
(Editor: Anuj Kumar) -
Novel Metal-Ceramic Composites
(Editor: Katarzyna Berent) -
Novel Synthetic Fibers for Textile Applications
(Editor: Rudolf Hufenus) -
Optical and Magnetic Properties of Glass and Glass Ceramics
(Editor: Razvan Stefan) -
Organic Matrix Composites and Multifunctional Materials
(Editor: Michelle Salvia) -
Perfluorinated Compounds: Synthesis, Properties and Applications
(Editor: Maurizio Sansotera) -
Photofabrication of Biobased Polymers and Composites
(Editors: Alessandra Vitale, Roberta Maria Bongiovanni) -
Polymer Composites: Microstructural, Thermal and Mechanical Properties
(Editor: Pietro Russo) -
Polymer Foams: Materials, Processing and Properties
(Editors: Volker Altstädt, Merve Aksit) -
Polymer Rheology and Processing of Nano- and Micro-Composites
(Editor: Ramón Pamies) -
Polymer-Inorganic Nanocomposites: Synthesis, Characterization and Applications
(Editor: Raluca Ianchis) -
Polymeric Biocomposite for Biomedical Applications
(Editor: Mar Fernandez-Gutierrez) -
Polymers, Multifunctional Nanomaterials, and Composites
(Editors: Anna Zawadzka, Bouchta Sahraoui, Artur P. Terzyk, Wojciech Kujawski) -
Porphyrin and Their Derivatives Synthesis, Characterization, and Applications
(Editors: Athanassios G. Coutsolelos, Maria Vasilopoulou) -
Process, Structure and Mechanical Behavior of Polymer and Composite Materials
(Editor: Jadwiga Laska) -
Processing and Thermal Properties of Hybrid Composites
(Editor: Regina Jeziorska) -
Processing, Modification and Properties of Biodegradable Polymeric Materials
(Editor: Rafał Malinowski) -
Processing, Properties and Applications of Ferroelectric Composites
(Editor: James Roscow) -
Production, Application and Properties of Bitumen
(Editor: Marek Iwański) -
Production, Characterization and Adsorption Studies of Composites
(Editor: Michal Galamboš) -
Rare-Earth-Based Composite and Nanostructured Materials with Advanced Tailored Functionalities
(Editors: Francesco Enrichi, Enrico Trave, Michele Back) -
Recent Advances in Multicomponent Polymer Systems
(Editors: Andrea Sorrentino, Maria Laura Di Lorenzo) -
Recycled Materials in Civil and Environmental Engineering
(Editors: Andrea Petrella, Michele Notarnicola) -
Sandwich Composites: Design, Simulation and Applications
(Editor: Aase Reyes) -
Selected Papers from 2021 4th International Conference on Advanced Composite Materials (ICACM 2021)
(Editor: Hideaki Tsukamoto) -
Structural and Luminescence Characterization of Glass
(Editor: Bogdan A. Sava) -
Structure–Physical Properties Relationship of Polymer and its Composites
(Editor: Tomasz Sterzynski) -
Structure, Morphology and Crystallization of Polymer Composites
(Editor: Maria Raimo) -
Study on Surfaces of Metallic Materials: Experimental and Numerical Analysis
(Editor: Jan Valíček) -
Study on the Development and Applications of Magnesium Alloys
(Editor: Chao Xu) -
Surface Modifications for Advanced Polymer Composites
(Editors: Francesco Branda, Aurelio Bifulco) -
Sustainable Natural Materials for Engineering Application
(Editor: Antonios Papadopoulos) -
Sustainable Polymers: From Synthesis to Functional Properties
(Editor: Matteo Gigli) -
Synthesis and Application of New Lignin-Based Polymers and Composites
(Editor: Dmitry V. Evtuguin) -
Synthesis and Characterization of Imprinted Sorbents
(Editor: Piotr Luliński) -
Synthesis, Characterization and Application of Electroactive Polymers
(Editor: Jennifer Irvin) -
Synthesis, Characterization, Theoretical Studies and Application of Nanofluids
(Editor: Antonio Sánchez-Coronilla) -
Ti-Based Composites: Advances in Technology, Microstructure, Physical Properties and Mechanical Behaviors
(Editor: Jaroslav Kovacik) -
Towards Toughened Composites: Present and Future Challenge
(Editors: Milad Saeedifar, Mohamed Nasr Saleh) -
Waste-Based Polymer Composites
(Editor: Aleksander Hejna)
Structure Analysis and Characterization 1170 Articles
Prof. Dr. Pascal Van Der Voort
Topical Collections (1)
-
Alloy and Process Development of Light Metals
(Collection Editors: Stefan Pogatscher, Peter J. Uggowitzer)
Current Special Issues (142)
-
4 D X-ray Computed Tomography for Material Science
(Editor: Daniel Vavřík) -
Additive Manufacturing and Its Biomedical Application
(Editor: Radosław Wichniarek) -
Additive Manufacturing of Alloys and Steels Using Electron Beam Melting
(Editors: Andrey Koptyug, Vladimir Popov) -
Additive Manufacturing of Alloys Using Electron Beam Powder Bed Fusion
(Editors: Carolin Koerner, Matthias Markl) -
Adsorption of Solid and Gaseous Surface
(Editor: Jaeyong Kim) -
Advance Materials for Multifunctional Applications—AMMA
(Editors: Corneliu Munteanu, Ioan Doroftei) -
Advanced Instrumentation for Materials Characterisation and Fabrication
(Editors: Tian Zheng, Elena Taran, Anders Barlow) -
Advanced Microstructural Characterizations of Biomaterials and Scaffolds
(Editors: Fabrizio Fiori, Alessandra Giuliani) -
Advanced Models on Structural Fatigue Monitoring
(Editors: Manuel López Aenlle, Fernández Fernández Pelayo, Alfonso Fernández-Canteli, Miguel Muniz-Calvente) -
Advanced Techniques for Materials Characterization
(Editor: Mihaela Albu) -
Advances in 3D Printing Meta-Sandwich Structures
(Editor: Hamidreza Yazdani Sarvestani) -
Advances in Cement, Lime and Concrete
(Editor: Záleská Martina) -
Advances in Electromagnetic Properties of Materials and Related Nondestructive Testing
(Editor: Przemyslaw Lopato) -
Advances in Mechanical Testing of Engineering Materials
(Editor: Stanisław Radkowski) -
Advances in Metal Additive Manufacturing
(Editor: Patrycja Szymczyk-Ziółkowska) -
Advances in Metal-Based Additive Manufacturing
(Editor: Gobinda Saha) -
Advances in Multi-scale Mechanical Characterization of Materials with Optical Methods
(Editor: Luciano Lamberti) -
Advances in Properties of the Rapidly Solidified Alloy
(Editors: Paweł Pietrusiewicz, Piotr Pawlik, Katarzyna Pawlik) -
Advances in Radiation-Induced Nanostructuration of Materials
(Editor: Joël Ribis) -
Advances in Soft Materials
(Editor: Marcel Krzan) -
Advances in Structural Analysis of Materials: Finite Element Modeling
(Editor: Damian Pietrusiak) -
Advances in Structure Analysis of Amorphous and Nanocrystalline Materials
(Editors: Małgorzata Karolus, Sabina Lesz) -
Advances in Structures and Properties of Glass
(Editor: Marcin Środa) -
Advances in Surface Topography Measurement and Analysis
(Editors: Magdalena Niemczewska-Wójcik, Pawel Pawlus, Monika Madej) -
Advances in Transition Metal Oxides
(Editor: Horng-Tay Jeng) -
Application of Biomass-Derived Carbonaceous Materials in Energy and Environment
(Editor: Lijian Leng) -
Applications of Scanning Probe Microscopy (SPM)-Methods in Materials Science
(Editor: Arnaud Caron) -
Applications, Optimization, and Comprehensive Characterization of Hydrogen Storage Materials
(Editor: José M. Bellosta von Colbe) -
Artificial Intelligence for Advanced Materials Research
(Editors: Alisa Stratulat, Stefan G. Stanciu) -
Behavior, Damage and Fracture of Aluminum Alloy: Experiments and Modeling
(Editors: Alexis Rusinek, Maria Henar Miguélez) -
Biohybrid Nanostructures: Design, Characterization, and Biomedical Applications
(Editors: Ziyou Zhou, Soubantika Palchoudhury, Nirupam Aich) -
Characterization and Control of Functionality of Advanced Materials
(Editors: Shigeru Suzuki, Shigeo Sato) -
Characterization and Processing of Complex Materials
(Editor: Akira Otsuki) -
Characterization and Properties of Thermal Barrier Coatings in Aerospace Structures
(Editor: Luis Saucedo-Mora) -
Characterization Methods for Metal Cast Processes
(Editor: Wolfram Volk) -
Coatings on Light Alloys Substrate
(Editor: Hongxiang Li) -
Compositional Complex Alloys: From Amorphous to High-Entropy
(Editors: Emil Babić, Hongbin Bei) -
Creep Behaviour and Life Assessment of Structural Materials
(Editors: Luca Esposito, Michele Perrella) -
Crystallographic Texture in Metallic Materials
(Editors: Jurij J. Sidor, Marton Benke) -
Damage Mechanisms and Failure Analysis in Materials
(Editor: Daniela Pilone) -
Damage, Fracture, and Fatigue of Metals
(Editor: Robert Eriksson) -
Deformation Analysis and Modeling of Engineering Materials
(Editor: Paul Follansbee) -
Deformation and Fracture of Thin Films and Nanostructured Materials
(Editor: Aleksei Viktorovich Panin) -
Design and Synthesis of Three-Dimensional Hybrid Organic-Inorganic Structures
(Editor: Edward Szłyk) -
Development and Applications of Force Microscopy Techniques
(Editor: Miriam Jaafar Ruiz-Castellanos) -
Dynamic Recrystallization Behaviors in Metals and Alloys
(Editor: Frank Montheillet) -
Effects of Temperature and Strain Rate on Steel Strengthening
(Editor: Adam Grajcar) -
Electrical, Thermal and Magnetic Properties of Alloys
(Editor: Daniel Rojas) -
Electrochemical Techniques and Methods for Materials Analysis
(Editor: Władysław W. Kubiak) -
Electron Microscopy for Understanding of the Relationship between the Structure, the Properties and the Functions of Metals, Semiconductors, Ceramics, Carbon Materials, Composites and Coatings
(Editors: Miroslawa Pawlyta, Klaudiusz Gołombek) -
Electronic Structures of Polar Intermetallic Compounds
(Editor: Simon Steinberg) -
Engineering Materials in Extreme Environments
(Editors: Yi Gong, Qi Tong) -
Erosion Resistance of Materials
(Editor: Alicja Krystyna Krella) -
Experimental and Numerical Analysis of Innovative Engineering Structures
(Editor: Rosa Lo Frano) -
Experimental and Numerical Analysis of Metals and Alloys and Their Industrial Applications
(Editor: Tomasz Łodygowski) -
Experimental Study and Modeling of Biomass Pyrolysis
(Editors: Jon Alvarez, Maider Amutio) -
Experimental Techniques and Artificial Intelligence for the Structural Health Monitoring of Composite Materials
(Editors: Roberto Marani, Davide Palumbo, Giuseppe Pitarresi) -
Experimental Testing and Numerical Simulation of Polymer-Based Additive Manufacturing Parts
(Editors: Maria Magdalena Pastor, Jordi Bonada) -
Failure Mechanisms and Fatigue Life Prediction of Engineering Structures
(Editors: José A.F.O. Correia, Shun-Peng Zhu, Grzegorz Lesiuk, Haohui Xin) -
Fatigue and Fracture of Additively Manufactured Materials
(Editors: Shengchuan Wu, Guian Qian) -
Fatigue and Fracture of Metals and Alloys: Numerical and Experimental Study
(Editors: Jaroslaw Galkiewicz, Lucjan Śnieżek) -
Fatigue Life under Multiaxial Load Conditions
(Editor: Marta Kurek) -
Fiber-reinforced Materials/Composites: Manufacturing, Characterization, Modeling, Testing and LCA
(Editor: Angela D. La Rosa) -
Heterogeneous Catalysts: Preparation and Application
(Editor: Zahra Gholami) -
Hot Isostatic Pressing as an Advanced Processing Route for Fabrication and Post-Treatment of Metallic Parts
(Editors: Daniele Ugues, Emilio Bassini) -
Interrelations between Phase Stabilities, Microstructure and Performance of Superalloys
(Editor: Erwin Povoden-Karadeniz) -
Investigation of Microstructural and Corrosion Properties of Steels and Light Alloys
(Editors: Claudio Gennari, Luca Pezzato) -
Investigations and Modelling of the Fracture Process in Metallic Materials
(Editor: Ihor Dzioba) -
Laser-Assisted Processing of Alloys and Metal Surface Layers
(Editor: Sławomir Kąc) -
Linear and Non-linear Mechanical Behavior of Brittle Materials
(Editor: Giovanni Bruno) -
Mass Spectrometry in Materials Science
(Editor: Rafał Frański) -
Materials Characterizations Using In-Situ Techniques
(Editors: Zibin Chen, Xiaozhou Liao, Wenge Yang) -
Materials Science of Non-Ferrous Metals and Alloys
(Editor: Anastasia Mikhaylovskaya) -
Materials Used in Conservation and Restoration Applications
(Editors: Ricardo Triães, Eduardo Ferraz, Joao Coroado) -
Measurement of the Environmental Impact of Materials
(Editors: Franz-Georg Simon, Ute Kalbe) -
Mechanical Properties and Electrical Conductivity of Ceramics
(Editors: Diego Gomez-Garcia, Bibi Malmal Moshtaghion) -
Mechanical Properties of High-Temperature Alloys
(Editor: Bernhard Sonderegger) -
Mechanics and Analysis of Advanced Materials and Structures
(Editors: Sanichiro Yoshida, Giovanni Pappalettera) -
Micro Non-destructive Testing and Evaluation
(Editor: Giovanni Bruno) -
Micromechanical Characterisation and Structures of Materials
(Editor: Alexander J G Lunt) -
Microscopy and Microanalysis in Nanostructured Materials
(Editor: Julio Ramírez-Castellanos) -
Microscopy in Material Science: Imaging, Analytics, and New Materials
(Editor: Nabila Maloufi) -
Microstructural Evolution in Crystalline Materials Subjected to Extreme Environments
(Editor: Sung Bo Lee) -
Microstructure and the Mechanical and Physical Properties of Light Metal Materials
(Editors: Zuzanka Trojanová, Zdeněk Drozd) -
Microstructures and Mechanical Properties of Al Alloy
(Editors: Marcello Gelfi, Marialaura Tocci) -
Modeling and Analysis of Static, Dynamic, and Thermal Behavior of Shell, Plate, and Beam Structures
(Editors: Ewa Magnucka-Blandzi, Jarosław Jędrysiak, Izabela Lubowiecka) -
Modeling and Testing of Laminated Glass
(Editors: Jan Zeman, Michal Šejnoha) -
Modeling of Coupled Phenomena in Novel Ferromagnetic Materials
(Editor: Krzysztof Chwastek) -
Modelling of Damage and Fracture in Materials and Structures
(Editors: Zengtao Chen, Jiye Chen) -
Modification of Diamond-Like Carbon Coatings for Biomedical Application
(Editors: Witold Kaczorowski, Witold Jakubowski) -
Molecular and Metal Complexes on Graphene
(Editor: Bignardi Luca) -
Nanocellulose-Based Materials: Structure, Properties and Applications
(Editors: Andrea Bernardi, Elena Vismara) -
New Achievements in Mechanical Methods for Residual Stress Analysis
(Editor: Jens Gibmeier) -
New Alloys, Materials and Processes for Components Working in Energy Equipment
(Editors: Amaia Calleja-Ochoa, Luis Norberto López De Lacalle, Anselmo Eduardo Diniz) -
Non-Destructive Evaluation on Hidden Damage of Micro/Nano Structures
(Editors: Ik-Keun Park, Chungseok Kim) -
Non-Destructive Testing of Composite Materials/Structures
(Editor: John S. Popovics) -
Non-linear Ultrasonic Waves and Vibrations for Testing Lightweight Materials
(Editor: Marc Kreutzbruck) -
Novel Acquisition and Analysis Methods for X-ray Micro-CT in Materials Sciences
(Editors: Veerle Cnudde, Matthieu N. Boone) -
Novel Clustered Materials
(Editor: Alexey Povolotskiy) -
Novel High-Performance Building Materials and Structures
(Editor: Young Kyu Ju) -
Numerical/Experimental Fracture Mechanics Methodologies for Composites and Their Joints
(Editors: Luis Távara, Jose Reinoso) -
On the Residual Strength and Damage Identification of Damaged Composite Structure
(Editors: Alessandro De Luca, Michele Guida, Roberto Citarella) -
Organic Nanofibers: Fabrication, Properties and Applications
(Editor: Alessandro Fraleoni Morgera) -
Performance and Applications of Ceramic and Ceramic Composite Materials
(Editor: Gurdial Blugan) -
Phase Transformation and Microstructure Evolution in Stainless Steels
(Editor: Javad Mola) -
Phase Transformation and Properties of Metals and Alloys
(Editor: Yuriy Gornostyrev) -
Photonics of GaN Superlattice Growth on Si Substrates
(Editor: Tomasz Jan Ochalski) -
Powder Processing of Light Alloys and Composites
(Editor: Damon Kent) -
Processing, Structure, Dynamics and Mechanical Properties of Polymeric Materials
(Editor: Janusz W. Sikora) -
Progress in Optical Characterization of Semiconductor Nanomaterials and Devices
(Editor: Nabiha Ben Sedrine) -
Quality, Microstructure and Properties of Metal Alloys
(Editor: Tomasz Lipiński) -
Quantum Cascade Lasers (QCLs): Design, Fabrication and Applications
(Editor: Kamil Pierściński) -
Recent Advances in Mechanisms of Fracture and Fatigue
(Editors: Jaroslav Pokluda, Reinhard Pippan) -
Recent Advances in Thermoelectricity: Materials Processing, Characterization and Modelling
(Editors: Pascal Boulet, Marie-Christine Record) -
Relationship between Structure and Properties of Glass/Ceramic Materials
(Editor: Piotr Jeleń) -
Reliability and Failure Analysis for Future GaN Technologies
(Editors: Frank Altmann, Matteo Meneghini) -
Semiconductor Quantum Wells and Superlattices
(Editor: Marcin Motyka) -
Sintering and Grain Growth Behavior of Ceramics
(Editor: John G. Fisher) -
Stress Analysis in Thin Films and Multilayers Materials
(Editor: Claudia Cancellieri) -
Structural and Optical Studies of Eu3+ Doped Materials
(Editor: Adam Watras) -
Structural and Thermal Properties of Polymeric Microspheres
(Editors: Beata Podkościelna, Małgorzata Maciejewska, Marta Grochowicz) -
Structural Behavior of Spot Welded Joints: Theoretical, Numerical and Experimental Analyzes
(Editors: Pierluigi Fanelli, Francesco Vivio) -
Structure and Deformation Behavior of Amorphous Alloys
(Editor: Zsolt Kovács) -
Structure and Mechanical Properties of Alloys
(Editor: Tomasz Tański) -
Structure and Properties of Crystalline Materials
(Editor: Denis Vinnik) -
Structure Property Relationship of Polymeric Materials
(Editors: Gisbert Riess, Florian Arbeiter) -
Structure, Magnetic Properties, and Magnetization Reversal Processes of Alloys
(Editor: Jerzy J. Wysłocki) -
Structure, Magnetocaloric Properties, and Thermodynamic Modeling of Alloys
(Editor: Piotr Gębara) -
Study on Materials for Adsorption of CH4 and CO2
(Editor: Norbert Skoczylas) -
Sustainability in Fiber Composites
(Editor: Manuela List) -
Synthesis and Advanced Characterization of Low-dimensional and Quantum Materials
(Editors: Carlo Grazianetti, Christian Martella) -
Synthesis and Characterization of Ceramics and Ceramic Pigments
(Editor: Maria Pilar Gómez-Tena) -
Synthesis and Characterization of Novel Multiferroics Magnetoelectric Materials and Composites
(Editor: Riccardo Cabassi) -
Synthesis, Microstructure and Magnetic Properties of Intermetallic Compounds
(Editor: Anna Bajorek) -
Synthesis, Structure and Technological Application of Phosphate Materials
(Editors: José R. García, Alaa Adawy) -
The Structure of Building Materials Obtained from Various Substances and Their Specialized Applications
(Editor: Magdalena Janus) -
Thermodynamic Properties, Structure and Phase Stabilities of Special Alloys
(Editor: Erwin Povoden-Karadeniz) -
Thermography Technique in Materials Science
(Editor: Vladimir Vavilov) -
Wearable Sensors: Architectures, Materials and Design
(Editors: Paolo Perego, Mauro Serpelloni) -
X-ray Diffraction of Functional Materials
(Editors: Thomas Walter Cornelius, Souren Grigorian)
Porous Materials 369 Articles
Prof. Dr. Rafael Luque
Current Special Issues (44)
-
Advanced Compact and Porous Semiconductor Metal Oxide Layers
(Editor: Eurig Wyn Jones) -
Advanced Functional Polymer‐Derived Ceramic Fibers: Preparation, Properties and Applications
(Editors: David Cornu, Philippe Miele, Chrystelle Salameh) -
Advanced Porous Biomaterials
(Editor: Jarosław Jakubowicz) -
Advanced Porous Polymers: Synthesis, Characterisations and Applications
(Editor: Robert Dawson) -
Advances in Microporous and Mesoporous Materials
(Editor: Pascal Van Der Voort) -
Advances in Structural and Mechanical Properties and Characterization of Aerogels
(Editors: Barbara Milow, Ameya Rege) -
Constitutive Model for Porous Metallic Materials
(Editor: Jon Alkorta) -
Conversion of Fly Ash into Zeolites and Their Application as Adsorbents of Carbon Dioxide
(Editor: Sylvia Boycheva) -
Covalent Organic Frameworks (COFs) and Metals Organic Frameworks (MOFs): Design and Applications
(Editor: María José Mancheño Real) -
Current Trends in Modelling of Flow and Transport in Fine Porous Materials
(Editor: Janez Perko) -
Design and Applications of Nanoporous Materials
(Editor: Takeshi Fujita) -
Development in Porous Nanoparticles
(Editor: Joanna Depciuch) -
Development of Bio-Based Composite Foams
(Editor: Krzysztof Strzelec) -
Feature Collection on Porous Materials
(Editors: Miguel Jorge, Moises Luzia Pinto) -
Functional Amorphous Materials
(Editor: Maria Cristina Mascolo) -
Functional Porous Materials for Gas Storage and Separations in Emerging Energy Technologies
(Editor: Pasquale Fernando Fulvio) -
Fundamentals of Adsorbents–Synthesis, Characterisation, Properties, and Application
(Editor: Durga Parajuli) -
Heat and Mass Transfer in Porous Materials
(Editor: Anatoliy Pavlenko) -
Innovation in Adsorption Processes and Materials for CO2 Capture
(Editors: Federica Raganati, Paola Ammendola) -
Mesoporous Materials for Photocatalytic and Environmental Applications
(Editor: Valentina Gargiulo) -
Mesoporous Silica and Their Applications
(Editors: Enrica Gianotti, Ivana Miletto) -
Metal Organic Frameworks: Chemistry and Applications
(Editors: Ricardo F. Mendes, Flávio Figueira) -
Metal–Organic Frameworks: Characteristics, Novel Materials, and Future Applications
(Editor: Wesley Gordon) -
Molecular and Mesoscale Simulations and Modeling of Porous Materials
(Editor: Aleksey M. Vishnyakov) -
New Advances in Characterization of Cellular Materials
(Editors: Liviu Marsavina, Jaroslav Kovacik) -
Novel Covalent Organic Frameworks: Design, Synthesis and Properties
(Editor: John Hoberg) -
Novel Inorganic Adsorbents for Environmental Purification
(Editors: Agnieszka Gładysz-Płaska, Ewa Skwarek) -
Organic and Carbon Gels: Properties and Application
(Editor: Ana Arenillas) -
Performance Research of Polyurethane Foams and Composites
(Editor: Saulius Vaitkus) -
Porous Glass and Ceramics: From Preparation to Applications
(Editors: Ewa Rysiakiewicz-Pasek, Tatiana Antropova) -
Porous Materials and Advanced Manufacturing Technologies
(Editor: Hamada Elsayed) -
Porous Materials and Nanozeolites
(Editors: Lubomira Tosheva, Svetlana Mintova) -
Porous Materials for Advanced Microfluidic Applications and Separations
(Editor: Mercedes Vázquez) -
Porous Silicon-Based Sensors and Biosensors
(Editor: Salvador Ponce Alcántara) -
Porous Support Materials
(Editor: Ana Marques) -
Preparation, Characterization and Applications of Zeolite-Based Materials
(Editors: Małgorzata Franus, Lidia Bandura) -
Recent Developments in Functional Porous Glass-Based Nanocomposites
(Editor: Agnieszka Cizman) -
Research on Flow and Heat Transfer in Metal Foams
(Editors: Vincenzo Naso, Marcello Iasiello) -
Spinning and Post-Processing of Carbon Nanotube Fibers and Their Applications
(Editor: Jaegeun Lee) -
Synthesis and Characterization of Glasses and Ceramic Materials
(Editor: Julian Plewa) -
Synthesis, Porous Structure Analysis, and Application of Sorbents in CO2 Capture
(Editor: Paula Teixeira) -
Theoretical Chemistry of Fullerenes and Related Materials
(Editor: Denis Sabirov) -
Zeolitic Materials: Structure, Properties, and Applications
(Editors: Bruno De Gennaro, Barbara Liguori, Abner Colella, Domenico Caputo)
Manufacturing Processes and Systems 1377 Articles
Prof. Dr. Sanjay Mathur
Topical Collections (2)
-
Metal Forming: Fundamentals, Simulation and Applications
(Collection Editor: Sang-Kon Lee) -
Spark-Plasma Sintering and Related Field-Assisted Powder Consolidation Technologies
(Collection Editor: Eugene A. Olevsky)
Current Special Issues (170)
-
3D and 4D Printing of Polymer Materials
(Editor: Zdenka Fohlerová) -
3D-Printed Dental Materials
(Editor: Ji-Man Park) -
Additive and Subtractive Manufacturing of Advanced Materials: Applications, Future Trends and Perspectives of Industry 4.0
(Editors: Danil Yurievich Pimenov, Munish Kumar Gupta, Tadeusz Mikolajczyk) -
Additive Manufactured Metals, Polymers and Hybrid Materials for Engineering Applications
(Editor: Aniello Riccio) -
Additive Manufacturing and Innovative Welding Technologies for Light Alloys
(Editors: Lucjan Śnieżek, Grzegorz Budzik, Grzegorz Królczyk) -
Additive Manufacturing Materials and Their Applications
(Editor: Ludwig Cardon) -
Additive Manufacturing of Aluminum Alloys and Aluminum Matrix Composites
(Editors: Hongze Wang, Mostafa Hassani, Greta Lindwall) -
Additive Manufacturing of Polymer-Based Composites
(Editors: Miguel Ángel Caminero Torija, Jesús Miguel Chacón Muñoz, Pedro José Núñez López) -
Additive Manufacturing of Superalloys
(Editors: Shrikant Joshi, Joel Andersson) -
Additive Manufacturing Technologies and Its Applications Using Advanced Materials
(Editor: Dong-Gyu Ahn) -
Additive Manufacturing Technologies for Sustainable Digital Construction
(Editors: Dirk Lowke, Harald Kloft) -
Additive Manufacturing: Technology, Applications and Research Need
(Editors: Seung-Kyum Choi, Hae-Jin Choi) -
Adhesive Bonding Lightweight Materials in Modern Vehicles Construction
(Editors: Marco Alfano, Fabrizio Moroni) -
Advanced CAD/CAM Restorative Materials for Natural Teeth
(Editor: Laura Ceballos) -
Advanced Design for Manufacturing Processes (Second Volume)
(Editors: Dongkyoung Lee, Sukhoon Pyo) -
Advanced Laser Microfabrication
(Editor: Joseph Sanderson) -
Advanced Manufacturing and Joining Technologies of Aluminum and Steel Sheets
(Editor: Pasquale Russo Spena) -
Advanced Materials in Additive Manufacturing for Medical Applications
(Editors: Rafael Antonio Balart Gimeno, Teodomiro Boronat Vitoria, Joaquim Ciurana Gay, Arantxa Eceiza Mendiguren, Luís Jesús Quiles Carrillo) -
Advanced Metal Forming Processes
(Editors: Jana Bidulská, Róbert Bidulský) -
Advanced Multilayered or Graded Materials: From Mechanisms to Applications
(Editors: Delphine Retraint, Michal Krzyzanowski) -
Advanced Pulse Laser Machining Technology
(Editors: Jörg Krüger, Jörn Bonse) -
Advanced Surface Treatment Technologies for Metallic Alloys
(Editor: Petricǎ Vizureanu) -
Advanced Technologies for Sustainable Materials
(Editor: Marek Hebda) -
Advanced Technology for Materials Synthesis and Processing - Series II
(Editor: Dermot Brabazon) -
Advanced Technology of Material Processing: Abrasive Water Jet Machining
(Editor: Libor M. Hlavac) -
Advances and Applications in Deep Eutectic Solvents Technology
(Editor: Matteo Tiecco) -
Advances in Duplex Stainless Steels
(Editors: Irene Calliari, Luca Pezzato) -
Advances in Electroless Metal Deposition
(Editors: Eugenijus Norkus, Loreta Tamasauskaite-Tamasiunaite) -
Advances in Hydrothermal Sintering and Crystal Growth
(Editors: Alain Largeteau, Mythili Prakasam) -
Advances in Laser Processing
(Editors: Félix Quintero Martínez, Juan Pou, Antonio Riveiro) -
Advances in Manufacturing Technology of Metal/Composite Hybrid Structures
(Editor: Dae-Cheol Ko) -
Advances in Materials Processing (Second Volume)
(Editor: Hansang Kwon) -
Advances in Mechanical Alloying and Milling
(Editors: Meiqing Zeng, Zhongchen Lu) -
Advances in Microwave Processing of Materials
(Editor: Guido Link) -
Advances in Novel Composites and Their Mechanical Properties
(Editors: Jose Díaz-Álvarez, Antonio Díaz-Álvarez) -
Advances in Polymer Composite Deposition Additive Manufacturing
(Editors: Douglas E. Smith, Chad Duty) -
Advances in Sintering of Ores, Metallic Powders, and Ceramics
(Editors: Luis Felipe Verdeja, Daniel Fernández González) -
Advances in Sustainable Manufacturing by Welding and Additive Manufacturing
(Editors: Pedro Vilaça, Anton Naumov, Oleg Panchenko) -
Advances on Dynamical and Structural Properties in Metallic Glasses
(Editor: Beatrice Ruta) -
Applications of Al Alloys on Lightweight Structures
(Editor: Krzysztof Karczewski) -
Atomization of Metallic Melts
(Editor: Nils Ellendt) -
Biomaterials, Implants and Scaffolds in Additive Manufacturing
(Editors: Dohyeong Lim, Bongju Kim) -
Ceramic Materials: Processing, Properties and Applications
(Editor: Lucjan Kozielski) -
Composites, Alloys and Advanced Processes for Manufacturing in Aeronautics and Aerospace
(Editors: Luis Norberto López De Lacalle, Naiara Ortega, Joseba Albizuri) -
Computational and Experimental Mechanics of Engineering Materials and Structures
(Editor: Georgios Savaidis) -
Continuous Casting of Alloys with Enhanced Properties
(Editor: Miroslav Cieslar) -
Design and Additive Manufacturing of Innovative Components with Hybrid Ceramics
(Editor: Alberto Ortona) -
Design and Application of Additive Manufacturing
(Editor: Rubén Paz) -
Design and Post Processing for Metal Additive Manufacturing
(Editors: Bartłomiej Wysocki, Joseph Buhagiar, Tomasz Durejko) -
Development and Application of 3D Printing Technology in Electromagnetic Devices
(Editor: Dmitry Isakov) -
Development of Advanced Oxide Dispersion Strengthened (ODS) Steels for Future Fusion Reactor Application
(Editor: Zbigniew Oksiuta) -
Development of Laser Welding and Surface Treatment of Metals
(Editor: Aleksander Lisiecki) -
Electrodeposition as a Convenient Route for the Production of Advanced Materials
(Editor: Constantina Kollia) -
Emerging Materials for Additive Manufacturing
(Editors: Swee Leong Sing, Wai Yee Yeong) -
Emerging Technologies for Development of Novel Materials Systems and Coatings
(Editor: Radu Robert Piticescu) -
Etching Kinetics and Mechanisms of Thin Films
(Editors: Kwang-Ho Kwon, Alexander M. Efremov, Yeon Ho Im) -
Fatigue and Fracture of Materials
(Editors: Tadeusz Łagoda, Andrzej Kurek) -
Finishing Operations to Enhance Surface Integrity of Parts
(Editors: Gilles Dessein, J. Antonio Travieso-Rodriguez) -
Finite Element Analysis and Models of Sustainable Manufacturing Processes
(Editors: Claudio Giardini, Gianluca D'Urso) -
Forming of Aluminium-Based Alloy
(Editor: Gillo Giuliano) -
Fracture Mechanics and Phase Field Approaches in Engineering Materials
(Editor: Francesco Freddi) -
From Surface Modification to Additive Manufacturing of Components by Solid-State Cold Spray Technology
(Editor: Mohammadreza Daroonparvar) -
Functional Coating Materials and Processing for Platform Technology
(Editor: Jun Hyup Lee) -
High Performance Aluminum Alloy and Composite Materials
(Editor: Tong Gao) -
High Pressure Synthesis in Materials Science
(Editor: Alain Largeteau) -
High-Entropy Alloys in New Technological Applications
(Editor: Raquel Lizárraga) -
Improving Alloy Material Performance: Alloy design, Structural Modification and Advanced Processing
(Editor: Alena Michalcová) -
In Situ Full-Field Deformation Measurements on Advanced Manufacturing Processes
(Editors: José Xavier, Telmo G. Santos) -
Infrared Fiber Lasers and Their Applications in Materials Processing
(Editors: Lukasz Sójka, Slawomir Sujecki) -
Innovative and Modern Technologies of Material Machining in Cutting and Abrasive Processes
(Editors: Jerzy Józwik, Józef Kuczmaszewski) -
Innovative Technologies and Materials for High-Performance Components
(Editor: Silvio Genna) -
Integrated Machine, Process Analysis and Modeling of Mechatronic Production Systems
(Editor: Steffen Ihlenfeldt) -
Large-Scale Facilities for Additive Manufacturing
(Editor: Efthymios Polatidis) -
Laser Ablation: Materials and Applications
(Editor: Nikša Krstulović) -
Laser Assisted Processes and Thermal Treatments of Materials
(Editors: Elisa Padovano, Claudio Francesco Badini) -
Laser Deposition Processes
(Editor: Sabina Luisa Campanelli) -
Laser Processing for Composite Materials
(Editor: Irina Hussainova) -
Laser Processing of Biocompatible Materials: From Fundamentals to Applications
(Editors: Irina Paun, Maria Dinescu) -
Laser Surface Modification of Cemented Carbides, Superalloys, Composites, and Alloys
(Editors: Damian Przestacki, Michal Kulka) -
Laser Treatment for Surface Layers
(Editor: Norbert Robert Radek) -
Machine Design: Numerical Simulation and Experimental Tests of Engineering Materials and Devices
(Editor: Guido La Rosa) -
Machining and Manufacturing of Alloys and Steels
(Editor: Robert Čep) -
Machining and Surface Properties of Steel Parts
(Editor: Krzysztof Żak) -
Magnetic Metal Materials
(Editor: Jan Świerczek) -
Manufacturing and Fatigue Properties of Materials
(Editors: Robert Ulewicz, František Nový) -
Manufacturing and Mechanics of Materials
(Editor: Milan Sága) -
Manufacturing Processes of Polymer Matrix Composites (PMCs)
(Editor: Francesco Gagliardi) -
Manufacturing, Heat Treatment and Forming of Advanced Metallic and Ceramic Materials
(Editors: Marcin Wachowski, Henryk Paul, Sebastian Mróz) -
Material Analysis of Additively Manufactured Metals
(Editor: Ludmila Kučerová) -
Material Design and Defect Control for Metal Additive Manufacturing
(Editor: Huajie Yang) -
Materials Sintering
(Editor: Ana Senos) -
Materials, Design and Process Development for Additive Manufacturing
(Editor: Vadim Sufiiarov) -
Mechanical Alloying and Heat Treatment
(Editor: Malgorzata Karolus) -
Mechanical Performance and Structural Integrity of Additive Manufactured Materials
(Editor: Robert Lancaster) -
Mechanical Properties of Advanced Materials and Structures
(Editors: Zhendong Sha, Kejie Zhao) -
Metal Additive Manufacturing Application: Technological Advances, Metal Design and Process Optimization
(Editor: Federico Mazzucato) -
Metal Forming and Forging
(Editors: Lander Galdós, Daniel Casellas) -
Metal Forming: Processes and Analyses
(Editor: Mansoo Joun) -
Metallurgical Process Simulation and Optimization
(Editors: Qing Liu, Jiangshan Zhang) -
Metallurgy of Non-ferrous, Rare and Precious Metals
(Editor: Alexander A. Gromov) -
Micro and Nano Processing Technologies of Modern Ceramics
(Editor: Manuel Pedro Fernandes Graça) -
Microstructural and Mechanical Properties Investigation of Alloy Prepared by Additive Manufacturing Technology
(Editor: Krzysztof Grzelak) -
Microstructure and Mechanical Properties of Alloys and Steels
(Editor: Kotiba Hamad) -
Microstructure and Mechanical Properties of Laser Additive Manufactured Metals
(Editor: Mariangela Lombardi) -
Microstructure and Mechanical Properties Relationship for Metallic Materials
(Editor: Jan Džugan) -
Microstructure and Physical Properties of Additive Manufactured Alloys
(Editor: Ori Yeheskel) -
Modeling of Materials Manufacturing Processes
(Editor: Ismet Baran) -
Modeling, Simulation and Data Processing for Additive Manufacturing
(Editor: Mika Salmi) -
Modification of Materials with Ion/Plasma Beams
(Editor: Marek Barlak) -
Modifications of Glasses and Glass-Ceramics
(Editor: Dmitry K. Tagantsev) -
Monitoring and Control in Additive Manufacturing Processes
(Editor: Brian T. Gibson) -
Monitoring of Cutting Process and Tool Condition of Metal Composite
(Editors: Paweł Twardowski, Michal Wieczorowski) -
Multi-Functional High Entropy Alloys: From Design to Application
(Editors: Jeong Min Park, Jongun Moon) -
New Advances in Light Metal Alloys for Additive Manufacturing
(Editors: Paolo Mengucci, Eleonora Santecchia) -
New Frontiers in Materials Design for Laser Additive Manufacturing
(Editors: Bilal Gökce, Eric Jägle, Manfred Schmid) -
New Materials and Understandings in Selective Laser Melting (SLM)
(Editors: Christopher Tuck, Nesma Aboulkhair) -
Nonconventional Technology in Materials Processing
(Editor: Rafał Świercz) -
Nondestructive Evaluation of Material
(Editors: Kyung-Young Jhang, Donghoon Kang) -
Novel Casting and Modelling Processes
(Editors: Mark Jolly, Konstantinos Georgarakis) -
Novel Material and Technological Solutions in Foundry Engineering
(Editor: Tomasz Wróbel) -
Novel Materials Synthesis by Mechanical Alloying/Milling
(Editors: Lluïsa Escoda, Joan-Josep Suñol) -
Numerical Modeling for Simulation of Different Processes in Manufacturing
(Editor: Ana González-Marcos) -
Optimization and Simulation in Alloy Cutting Processes
(Editor: Wojciech Zębala) -
Physical and Numerical Modeling of Process Metallurgy
(Editor: Mikael Ersson) -
Polish Achievements in Materials Science and Engineering
(Editors: Jakub Zdarta, Agata Zdarta) -
Precision and Ultra-Precision Subtractive and Additive Manufacturing Processes of Alloys and Steels
(Editors: Stanislaw Legutko, Szymon Wojciechowski) -
Primary Metallurgy of Iron and Steel: Towards Low Carbon Steel Production
(Editor: Johannes Schenk) -
Processing of End-of-Life Materials and Industrial Wastes
(Editor: Ndue Kanari) -
Processing, Microstructure and Property Relationships in Advanced Manufacturing of Alloys
(Editor: Yong-Cheng Lin) -
Progress in Metal Additive Manufacturing and Metallurgy (Second Volume)
(Editor: Robert Pederson) -
Progress in Plastic Deformation of Metals and Alloys
(Editor: Wojciech Borek) -
Radial-Shear and Screw Rolling Process
(Editors: Sergei Pavlovich Galkin, Yury Gamin) -
Recent Achievements and Developments in Micro/Nano-Forming: Theory, Technology and Applications
(Editors: Jie Xu, Linfa Peng) -
Recent Advances and Trends in Metal Forming
(Editor: Janusz Tomczak) -
Recent Advances in Additive Manufacturing of Metallic Materials
(Editor: Jong Bae Jeon) -
Recent Advances in Additive Manufacturing Technologies
(Editor: Alexander A. Gromov) -
Recent Advances in Ceramic Manufacturing
(Editor: Tassilo Moritz) -
Recent Advances in Machining of Difficult-to-Cut Materials
(Editor: Salman Pervaiz) -
Recent Advances in Metal Forming Technology
(Editor: Dong Won Jung) -
Recent Developments in Manufacturing Processes for Electronics
(Editor: Joseph Ahn) -
Recent Developments in Non-Conventional Welding of Materials (Volume II)
(Editors: Rui Manuel Leal, Ivan Galvão) -
Recent Developments in Pro-ecological Materials and Processes
(Editor: Marek Opielak) -
Recrystallization and Phase Transformation of Steel Materials
(Editor: Toshio Ogawa) -
Rejuvenation Heat Treatment of High-Temperature Advanced Alloys
(Editor: Inmaculada Lopez-Galilea) -
Reliability of Structural Integrity and Engineering Materials
(Editors: Jae Hyuk Lim, Jin Weon Kim, Jaesool Shim) -
Research and Analysis in Structural Steels
(Editor: Carlos López-Colina) -
Research and Development of Additive Manufacturing Technology
(Editors: Volker Schulze, Frederik Zanger) -
Research on Additive Manufacturing of Novel Alloy Materials
(Editors: Wojciech Zębala, Grzegorz Struzikiewicz) -
Research on Machining Methods and Mechanical Properties of Alloys
(Editor: Marcin Nabialek) -
Research Progress on Hydrogen Embrittlement and Fracture Mechanics of Materials
(Editors: Miguel Lorenzo, Jesús Toribio) -
Self-Healing Concretes
(Editor: Marjan Marinšek) -
Simulation, Modelling and Advanced Experimental Techniques in Hot Deformation Processing of Steels
(Editors: Mahesh Somani, Ilchat Sabirov) -
Sintering and Processing of Metallic Materials: Experiments and Simulation
(Editors: Juan Manuel Montes Martos, Fátima Ternero Fernández) -
Specialty Polymers for Additive Manufacturing
(Editor: Jochen Schmidt) -
Studies on Additive Manufacturing of Advanced Materials
(Editors: Dumitru Nedelcu, Eugen Axinte) -
Studies on Long-Term Aging of Steel
(Editor: Chungseok Kim) -
Superalloys–Currents Trends in Development of Their Microstructure and Properties
(Editor: Jan Sieniawski) -
Surface Inspection and Description in Metrology and Tribology
(Editors: Michal Wieczorowski, Maxence Bigerelle, Chris Brown, Pawel Pawlus, Rafał Reizer, Alejandro Pereira) -
Surface Topography Description as a Determinant of Quality and Functionality
(Editors: Wiesław Graboń, Thomas G. Mathia) -
Synthesis, Sintering and Application of Ceramic Materials
(Editors: Dariusz Kata, Jan Huebner) -
The Effects of Process Parameters and Geometrical Features on the Mechanical Performance of AM Components
(Editors: Mirco Peron, Seyed Mohammad Javad Razavi) -
The Progress of Advance High-Strength Steels (AHSS)
(Editor: Tibor Kvačkaj) -
The Science and Technology of 3D Printing
(Editor: Tuhin Mukherjee) -
Tribology: Friction and Wear of Engineering Materials (Second Volume)
(Editor: Pawel Pawlus) -
Ultrasound for Material Characterization and Processing
(Editor: Francesca Lionetto) -
Underwater Processing of Materials
(Editors: Dariusz Fydrych, Jacek Tomków) -
Wear Performance and Tribological Behavior of Steel and Cast Iron
(Editor: Gary Barber) -
Welding and Joining of Materials for Advanced Aerospace Applications
(Editors: Damjan Klobcar, Uroš Trdan) -
Welding and Joining Processes of Materials
(Editor: Shinichi Tashiro)
Advanced Nanomaterials and Nanotechnology 427 Articles
Prof. Dr. Andrei V. Petukhov
Current Special Issues (102)
-
Advanced Ecofriendly Nanocomposite Materials
(Editors: Antonino Cataldo, Luca Pierantoni, Davide Mencarelli) -
Advanced Materials for Gas Sensors
(Editor: Cristian E. Simion) -
Advanced Nanocomposites Materials Based on Graphene Oxide/Reduced Graphene Oxide: Potential Applications and Perspectives
(Editors: Angela Longo, Mariano Palomba) -
Advanced Nanoparticles for Ultrasonic and Magnetic Applications
(Editor: Arkadiusz Józefczak) -
Advanced Nanostructures and Nanotechnologies for Gas Capture and Adsorption
(Editor: Urszula Narkiewicz) -
Advanced Structural Materials and Nanomaterials
(Editors: Alvaro Ridruejo, Francisca Martinez Hergueta) -
Advanced Systems in Targeted Alpha Particle Therapy
(Editor: Ján Kozempel) -
Advances in Electronic and Optical Properties of Nanostructured Materials
(Editor: Thierry Baron) -
Advances in Epitaxial (Nano)-Materials for Optoelectronics
(Editor: Achim Trampert) -
Advances in Functional Conductive 3D Printed Nanomaterials and Nanostructures
(Editors: Jacek Ryl, Robert Bogdanowicz) -
Advances in Liquid Crystal Nanomaterials
(Editors: Natália Tomašovičová, Sergii Burylov) -
Advances in Luminescent Engineered Nanomaterials
(Editor: Luís Pinto Da Silva) -
Advances in Metal-Based Nanoparticles
(Editors: Catherine Dendrinou-Samara, Michael Moustakas) -
Advances in Nanocrystalline Cellulose and Their Applications
(Editor: Alessandra Operamolla) -
Advances in Nanomaterial-Based Water Purification
(Editor: Lorenzo S. Caputi) -
Advances in Nanostructured Materials
(Editors: Paweł Głuchowski, Robert Tomala) -
Advances in Plasmas
(Editor: Jae Young Kim) -
Advances in Polymer Nanofibers: Thermomechanical Properties and Internal Supermolecular Structure
(Editor: Arkadi Arinstein) -
Advances in Semiconductor Nanostructures for Nanoelectronics and Nanophotonics
(Editor: Harry Ruda) -
Advances in Sol–Gel Synthesis of Magnetic Nanomaterials for Photocatalytic Applications
(Editor: Adrian Iulian Borhan) -
Advances in Structure and Properties of Amorphous and Nanocrystalline Alloys
(Editors: Marcin Nabiałek, Bartłomiej Jeż) -
Advances of Atomic Layer Deposition Synthetic Nanostructures
(Editor: Mikhael Bechelany) -
Advances on Oxide Semiconductor Transistors and Related Materials
(Editor: Pedro Barquinha) -
Advantages and Perspectives of ZnO Nanostructured Materials
(Editors: Ana Urbieta, Paloma Fernández Sánchez, Jong-Lam Lee) -
Application of 2D Transition Metal Dichalcogenides for Advanced Nanosensors
(Editors: Lado Filipovic, Tibor Grasser) -
Application of Magnetic Nanofibers in Analytical Chemistry
(Editor: Francisco Javier Guzmán Bernardo) -
Applications of Nanomaterials in Environmental Science and Engineering
(Editor: Won San Choi) -
Applications, Preparation and Characterization of Metal-Ceramic Nanocomposites
(Editor: Antonello Marocco) -
Biofunctional Nanomaterials for Optical Diagnostic and Therapeutic Applications
(Editor: Irina V. Balalaeva) -
Bioresources as Precursor for Novel Nanostructured Materials towards Environmental Remediation
(Editors: Dimitrios Giannakoudakis, Ioannis Pashalidis, Ioannis Anastopoulos, Mariusz Barczak) -
Carbon Nanotube-Based Nanocomposites
(Editor: Anna Boczkowska) -
Carbon- or Graphene-Modified Nanoparticles: Synthesis, Characterization, and Applications
(Editors: Valentina Palmieri, Massimiliano Papi) -
Carbon-Based Materials and Nanotechnology for Biomedicine and Tissue Engineering
(Editor: Barbara Strojny-Cieslak) -
Characterization of Nanostructures and Heterostructures
(Editor: Neven Biškup) -
Chemical and Structural Engineering of Two-Dimensional Nanomaterials
(Editor: Hyunseob Lim) -
Control of Micro-/Nanostructures of Solid Oxide Fuel Cells
(Editor: Keisuke Nagato) -
Development and Applications of Nanomaterials for Novel Cancer Therapies
(Editors: Wei R. Chen, Feifan Zhou) -
Electrospinning: Nanofabrication and Application
(Editor: Andrea Ehrmann) -
Emerging Technologies in Nanodevices and Energy Generation Applications
(Editor: Moh R. Amer) -
Feature Papers for Section Advanced Nanomaterials and Nanotechnology
(Editor: Andrei V. Petukhov) -
Flame Synthesis and Characterization of Oxide Nanoparticles
(Editor: Silvana De Iuliis) -
Functional Nanomaterials for a Better Life
(Editors: Matteo Tonezzer, Davide Barreca) -
Functional Nanomaterials for Biomedical Applications
(Editor: Fathi Moussa) -
Functional Nanomaterials for Current and Prospective Medical Applications
(Editor: Anna Karewicz) -
Functional Nanomaterials: Structure, Properties, and Applications
(Editor: Hiesang Sohn) -
Functional Nanoparticle Arrays
(Editor: Min Han) -
Graphene Based Hybrid Nanostructures: Synthesis and Characterization
(Editor: Zoltán Osváth) -
Hydrothermal Treatment and its Modern Modifications for Synthesis of Nanomaterials
(Editor: Alexander Vanetsev) -
Innovations in Materials, Fabrication and Functionalization of Microfluidic Devices
(Editors: Volker Paul Schulz, Thorsten Röder) -
Inorganic and Hybrid Polymers
(Editor: Ian Teasdale) -
Ion-Doped Nanomaterials
(Editor: Agata Szczeszak) -
Laser Processes of Nanomaterials for Tissue Engineering and Biomedicine
(Editor: Ahmed Al-Kattan) -
Laser Technologies in Metal-Based Materials
(Editor: Alina A. Manshina) -
Lithography: Materials, Processes and Applications
(Editor: JaeJong Lee) -
Low Dimensional Functionalized Electrospun Nanostructured Materials: Synthesis, Applications and Technology
(Editors: Bernardo Gonçalves Almeida, Etelvina de Matos Gomes, Rosa Maria Ferreira Baptista) -
Magnetic Nanomaterials
(Editor: Lucia Del Bianco) -
Magnetic Nanoparticle-Based Materials: Synthesis and Biomedical Applications
(Editor: Elisabete Maria Dos Santos Castanheira Coutinho) -
Magnetic Nanoparticles as High-frequency Nano-heaters
(Editor: Patricia De la Presa) -
Manufacturing and Application of Modified Nanofiber Composites
(Editor: Izabella Krucińska) -
Medical Nanocarriers
(Editor: Cláudia Botelho) -
Modern Materials with Amorphous and Nanocrystalline Structure
(Editor: Paweł Pietrusiewicz) -
Nanocellulose and Cellulose-Based Nanocomposites: Synthesis, Characterization and Applications
(Editors: Sławomir Borysiak, Izabela Ratajczak) -
Nanocellulose-Based Advanced Materials
(Editors: Nathalie Lavoine, Lucian Lucia) -
Nanocomposites and Nanostructured Materials Based on Polymers
(Editor: Jaime J. Hernandez) -
Nanomaterials for Health-Care, Environmental Monitoring and Food Quality Control
(Editor: Francesca Costantini) -
Nanomaterials for In Vivo Imaging and Theranostics
(Editor: Hyung-Jun Im) -
Nanomaterials for Medical Application
(Editor: Anton Ficai) -
Nanomaterials Processed via Plasma Techniques
(Editor: Vadym Prysiazhnyi) -
Nanoparticle-based Sensors for Molecular Imaging
(Editor: Fernando Herranz) -
Nanoparticles and Nanomaterials for Medicine and Biology
(Editor: Sylwia Męczyńska-Wielgosz) -
Nanoparticles and Nanotechnology: From the Synthesis to Application
(Editor: Mateusz Dulski) -
Nanoparticles for Biomedical Applications
(Editors: Fernando Herranz, Juan Pellico) -
Nanoparticles for Conductors
(Editor: Dominique de Caro) -
Nanostructured Materials Fabricated via Laser Techniques
(Editor: Florian V. Dumitrache) -
Nanotechnology for Environmental Remediation
(Editors: Antonino Cataldo, Antonio Maffucci) -
New Insight into Design and Properties of Nanomaterials
(Editors: Sergei Kulinich, Valery A. Svetlichnyi, Neli Mintcheva) -
Nonlinear Optics of Nanomaterials
(Editor: Tatiana V. Murzina) -
Novel Engineered Nanomaterials for Advanced Biological Applications
(Editor: Helena Oliveira) -
Novel Nanoparticles and Nanomaterials: From Design to Applications
(Editor: Ovidiu Oprea) -
Novel Synthetic and Natural Materials for Fighting the Global Challenge of Antimicrobial Resistance
(Editor: Mariana Carmen Chifiriuc) -
Obtaining and Characterization of New Materials
(Editor: Andrei Victor Sandu) -
Organic and Inorganic Nanomaterials
(Editor: Anna Rabajczyk) -
Photoresponsive Nanomaterials for Advanced Application
(Editor: Katarzyna Matras-Postołek) -
Preparation, Characterization and Applications of Silica-Based Nanocomposite Materials
(Editor: Łukasz Laskowski) -
Preparation, Physico-Chemical Properties and Biomedical Applications of Nanoparticles
(Editor: Simona Cavalu) -
Properties of Amorphous Materials and Nanomaterials
(Editor: Marcin Nabialek) -
Recent Advances in Functional Nanomaterials
(Editor: Valery N. Khabashesku) -
Recent Advances in Modification and Surface Functionalization of Nanostructured Materials
(Editor: Arūnas Jagminas) -
Recent Advances in Nanomaterials for Biosensing Applications
(Editor: Arunas Ramanavicius) -
Recent Development of Surface Chemistry of Nanomaterials
(Editor: Anwar Ahniyaz) -
Research of Photocatalytic, Antibacterial and Biocompatible Properties of Nanoparticles
(Editor: Miruna Silvia Stan) -
Semiconductor Nanowire Devices and Applications
(Editors: Francesco Rossella, Giovanni Pennelli, Antonio Polimeni) -
Silicon Nanoparticles: Synthesis and Application
(Editor: Yimin Chao) -
Silver Nanoparticles: Design, Synthesis, and Applications
(Editors: Paweł Piotr Pomastowski, Viorica Railean-Plugaru) -
State-of-the-Art Functional Materials and Nanomaterials in Asia 2021
(Editors: Sergei Kulinich, Valery A. Svetlichnyi, Aleksandr Kuchmizhak, Mitsuhiro Honda) -
Surface Properties of Nanoparticles and Their Applications in Biomedicine
(Editor: Jae-Seung Lee) -
Synthesis and Applications of Nanoparticles
(Editor: Maria Harja) -
Synthesis and Characterization of Emerging Two-Dimensional Nanomaterials
(Editors: Yonghun Kim, Byungjin Cho) -
Synthesis and Characterization of Nanomaterials for Electrochemical Applications
(Editors: Nadia Garino, Yunfeng Qiu) -
Synthesis, Morphology, and Properties of Functional Nanomaterials
(Editor: Andrey S. Mereshchenko) -
The Effect of Nanomaterials on Cellular Systems
(Editor: Marcin Kruszewski) -
TiO2-Based Nanostructures, Composites and Hybrid Photocatalysts
(Editors: Stefano Lettieri, Michele Pavone)
Smart Materials 233 Articles
Prof. Dr. Seung Hwan Ko
Topical Collections (1)
-
Shape Memory Alloys (SMAs) for Engineering Applications
(Collection Editors: Masoud Motavalli, Christoph Czaderski, Moslem Shahverdi)
Current Special Issues (60)
-
Advanced Coordination Polymers
(Editor: Catherine P. Raptopoulou) -
Advanced Materials for Clothing and Textile Engineering
(Editor: Dubravko Rogale) -
Advanced Materials for Smart Windows Devices
(Editor: Mariam Barawi) -
Advanced Multifunctional and Multiscale Materials
(Editors: Giulia Lanzara, Nathan Salowitz) -
Advanced Strain and Deformation Sensing Materials and Applications
(Editors: Senentxu Lanceros-Mendez, Pedro Costa, Vítor Manuel Gomes Correia) -
Advances and Frontiers in Magnetostrictive Materials
(Editor: Mikhail Shamonin) -
Advances in Functional Soft Materials
(Editor: Hyung-Jun Koo) -
Advances in Self-Healing Composites
(Editors: Eugenio Amendola, Hesheng Xia) -
Advances in Smart Materials and Self-Powered Nanogenerators Systems
(Editor: Tao Jiang) -
Advances in Smart Materials Based Actuators
(Editor: Jahangir Rastegar) -
Advances in the Structural and Functional Characterization of Ferroic Materials
(Editors: Denis Alikin, Ali Baghizadeh) -
Artificial Intelligence Instruments Applied in Materials Science
(Editor: Silvia Curteanu) -
Characteristics and Properties of Piezoelectric Smart Materials
(Editor: Haim Abramovich) -
Damage and Mechanical Properties of Steels
(Editor: Auezhan Amanov) -
Design, Characterization and Novel Applications of Shape Memory Alloys
(Editors: Girolamo Costanza, Maria Elisa Tata) -
Designing and Manufacturing Hard and Soft Mechanical Metamaterials
(Editor: Reza Hedayati) -
Electrorheological and Magnetorheological Performance in Materials Science
(Editor: Tomáš Plachý) -
Fabrication, Characterization and Application of Chemical Sensors
(Editors: Gabriele Magna, Capuano Rosamaria) -
Feature Paper in Section Smart Materials
(Editor: Seung Ko) -
Functional and Architected Materials
(Editor: Stephan Rudykh) -
Functional and Smart Materials for Industry, Robotics and Sensor technologies
(Editor: Roman Szewczyk) -
Functional Fe-Based Alloys with Magneto-Mechanical Coupling
(Editor: Igor S. Golovin) -
Functional Polymeric Materials for Biomedical and Environmental Applications
(Editors: Szczepan Zapotoczny, Czesław Kapusta) -
Glass Science at a Turning Point
(Editors: Robert F. Tournier, Michael Ojovan) -
Hybrid Biopolymer-Based Smart Materials: Synthesis, Characterization and Application
(Editor: Elena Krivoshapkina) -
Hydrophilic Copolymers for Bioapplications or Water Remediation
(Editors: Zacharoula Iatridi, Vlasoula Bekiari, Georgios Bokias) -
Janus Nanoparticles
(Editor: habil. Alla Synytska) -
Lanthanide-Based Multifunctional Materials
(Editor: Ulrich Baisch) -
Light Alloys and High-Temperature Alloys
(Editor: Lijun Zhang) -
Low-Cost Water Treatment - New Materials and New Approaches
(Editors: Andreas Taubert, Emmanuel Unuabonah) -
Materials for Heavy Metals Removal from Waters
(Editors: Magdalena Balintova, Adriana Estokova) -
Materials with Shape Memory: Phase Transformations, Microstructure and Properties
(Editor: Lotkov Aleksandr Ivanovich) -
Metamaterials and Surfaces: Theoretical and Experimental Research
(Editor: Edward Bormashenko) -
Micro-Sensing and Micro-Energy Related Materials for Biomedical Applications
(Editors: Xiaohong Wang, Cheng-Hsien Liu) -
Microstructure and Mechanical Properties of Metals and Alloys
(Editor: Jae-Hyung Cho) -
Modeling and Simulations of Smart Materials
(Editors: Andrea Sellitto, Mauro Zarrelli) -
Multifunctional Textile Materials
(Editor: Barbara Simončič) -
Multilayer and Hybrid Two-Dimensional Materials
(Editor: Mariusz Krawiec) -
Nanofabrication, Characterization and Application of Magnetic Functional Materials
(Editor: Gennadij Vladimirovich Stepanov) -
Nanomaterials Based Sensors
(Editor: Tae Hyun Kim) -
Nanotechnologies in Textiles
(Editor: Tomas Tamulevicius) -
New Aspects of Ferromagnetic Shape Memory Alloys: From Fabrication to Applications
(Editor: Pablo Álvarez-Alonso) -
Novel High-Temperature Materials: Preparation, Characterization, and Applications
(Editor: Lucyna Jaworska) -
Phase Change Materials: Characterizations for Uses
(Editor: Jean Pierre Dumas) -
Physics and Applications of Epsilon-Near-Zero Materials
(Editor: Alessandro Ciattoni) -
Recent Advances in High Entropy Ceramics (HEC’s): Synthesis, Design, Structure, Properties and Applications
(Editors: Bogdan Stefan Vasile, Vasile Adrian Surdu) -
Recent Advances in the Field of Mechanical Metamaterials and Their Associated Applications and Fabrication Techniques
(Editors: Ahmad Baroutaji, Arun Arjunan) -
Self-Regulating Materials: Design, Fabrication and Applications
(Editor: Guido Panzarasa) -
Shape Memory Materials: New Design Concepts and Novel Materials
(Editor: Andrea Spaggiari) -
Smart and Innovative Building Materials for Civil and Military Applications
(Editors: Raul Fangueiro, Alexandre Bogas, António Gomes Correia) -
Smart and Multifunctional Thin Film Materials and Applications for Sensors and Actuators
(Editor: Armando Ferreira) -
Smart and Renewable Materials: Characterization, Manufacturing and Application
(Editors: Alexander Petutschnigg, Nicola Hüsing, Manfred Tscheligi) -
Smart Composite and Sandwich Structures: From Modeling and Design to Control and Applications
(Editors: Ramin Sedaghati, Xian-Xu ‘Frank’ Bai) -
Smart Composite Materials for Self-Sensing and Self-Healing in Civil and Environmental Engineering
(Editors: Antonios Kanellopoulos, Mihaela Anca Ciupala) -
Smart Fabrics and Intelligent Textiles
(Editors: Grażyna Bartkowiak, Anna Dąbrowska) -
Smart Materials for Bioelectronics
(Editor: Daewon Kim) -
Smart Materials Technologies
(Editors: Ricardo Branco, Filippo Berto) -
Smart Polymer Coating Materials and Technologies
(Editor: Janusz Kozakiewicz) -
Smart Textile Materials and Fabric-Based Wearable Devices
(Editor: Jihyun Bae) -
Transition Metal Complexes and Their Applications
(Editor: Piotr Smoleński)
Thin Films 224 Articles
Current Special Issues (50)
-
Advanced Modification Methods to Improve the Performance of Thin Films and Coatings
(Editor: Karol Kyzioł) -
Advanced Modification of Membrane Materials
(Editors: Tatiana V. Plisko, Ilya L. Borisov) -
Advanced Sorbents for Clean Water Production
(Editors: Carlos Manuel Silva, Cláudia B. Lopes, Eduarda Pereira) -
Advances in Diamond-Like Carbon (DLC) Films
(Editor: Sarunas Meskinis) -
Advances in Flexible Organic Thermoelectrics
(Editor: Chungyeon Cho) -
Advances in Solid Films
(Editor: Andrzej Turos) -
Application of Functional Textile Materials and Films
(Editor: Bojana Vončina) -
Atomic Layer Deposited Thin Films for Optical Fiber Sensors
(Editor: Kamil Kosiel) -
Atomic Layer Deposition Technique in Material Science
(Editors: Jiyoung Kim, Si Joon Kim) -
Characterization and Application of Heusler, Semi-Heusler Alloys, and Semiconductors Films
(Editor: Janusz Dubowik) -
CVD Deposition and Characterization of Multilayers and Thin Films
(Editor: Victor Ralchenko) -
Development and Application of Ion-Exchange Membranes
(Editor: Heiner Strathmann) -
Development of Structure and Barrier Properties of Polymer Nanocomposite Films
(Editor: Nadege Follain) -
Diamond, DLC and Ultra-Hard Coatings
(Editor: Francisco J. G. Silva) -
DLC (Diamond-Like Carbon) Film Formation and Application
(Editor: Naoto Ohtake) -
Fabrication, Characterization, and Application of Coatings and Thin Films
(Editor: Annett Dorner-Reisel) -
Friction, Wear and Lubrication of Micro-Patterned Thin Films
(Editor: Annett Dorner-Reisel) -
Functional Surface Structures and Thin Solid Films
(Editor: Mikołaj Lewandowski) -
High-k Atomic Layer Deposition
(Editors: Lukasz Wachnicki, Sylwia Gierałtowska) -
Innovative Technologies and Materials for the Production of Mechanical, Thermal and Corrosion Wear-Resistant Surface Layers and Coatings
(Editors: Artur Czupryński, Claudio Mele) -
Magnetic and Structural Properties of Ferromagnetic Thin Films
(Editors: Voicu Octavian Dolocan, Sylvain Bertaina) -
Mechanical and Tribological Properties of Advanced Materials and Coatings
(Editor: Chang-Lae Kim) -
Microstructures and Electrical Conductivity of Thin Films
(Editors: Paola Manini, Marianna Ambrico) -
Microstructures and Mechanical Properties of Metallic Thin Films and Coatings
(Editor: Helmut Riedl) -
Nano-Engineering of Functional Oxides: Synthesis, Functional Properties and Applications
(Editors: Adrian Carretero Genevrier, César Magén) -
Nanostructured C-Based Thin Films
(Editor: Edvige Celasco) -
Nature-Inspired Materials and Surfaces for Tribo-Applications
(Editor: Maksim Antonov) -
Noble Metals Doped Thin Films
(Editor: Ireneusz Piwoński) -
Optical Characterization and Applications of Metallic Thin Films
(Editor: Lukasz Skowronski) -
Oxide-Based Thin Films and Layers: From Preparation to Applications
(Editor: Ewa Popko) -
Polar and Magnetic Relaxors and Other Cluster Glasses
(Editor: Jan Dec) -
Polymeric Membranes: Preparation and Application
(Editors: Alexey Volkov, Lidietta Giorno) -
Preparation and Characterization of Thin Films and Its Applications in Renewable Energy
(Editor: Ahalapitiya H Jayatissa) -
Preparation and Properties of Thin Films
(Editor: Mariana Osiac) -
Preparation, Characterization and Application of Metal Oxide Thin Films
(Editor: Hee Chul Lee) -
Properties of Interfaced Materials and Films
(Editors: Nuggehalli M. Ravindra (Ravi), Anthony T. Fiory) -
PVD Coatings: Synthesis, Materials and Properties
(Editor: Jiří Rezek) -
Research on Materials and Properties of Organic Thin Film Transistors
(Editor: Benoit Hugo Lessard) -
Semiconducting Thin Films for Energy Harvesting
(Editor: Paolo Scardi) -
Surface Functionalization Processes for New Multifunctional Materials
(Editor: Roberto Verucchi) -
Surface Properties of Thin Films
(Editor: Albert Verdaguer) -
Synthesis and Applications of Ferroelectric Thin Films
(Editor: Jose P. B. Silva) -
Synthesis and Characterization of Thin Films for Optoelectronic Applications
(Editor: Zdeněk Remeš) -
Synthesis, Characterization, and Applications of Ferroelectric Films
(Editors: Andrei Kholkin, Vladimir Shvartsman) -
Synthesis, Properties and Applications of Intermetallics, Ceramic and Cermet Coatings
(Editor: Cezary Senderowski) -
The Composition and Photoelectrochemical Performance of Thin Films
(Editors: Adam Cenian, Katarzyna Siuzdak, Miroslaw Sawczak) -
Thin Films for Sensing Applications
(Editor: Joel Borges) -
Thin Films Prepared by Wet-Chemical Solution Processes
(Editor: Yun-Hyuk Choi) -
Thin Films: Growth, Characterization, and Optoelectronic Device Applications
(Editor: Nikolas J. Podraza) -
TiO2 Thin Films Applications
(Editor: Diana Mardare)
Catalytic Materials 153 Articles
Prof. Dr. Steven L. Suib
Current Special Issues (34)
-
Advance in Novel Nanostructured Metal Oxide Electrocatalysts
(Editors: César Quijada, Raul Berenguer) -
Advanced Materials in Catalysis and Adsorption
(Editor: Ilya V. Mishakov) -
Advanced Nanocatalyst for Methane Oxidation
(Editor: Zouhair Boukha) -
Advanced Nanostructured Materials for Catalytic Applications towards Fine Chemicals Production
(Editors: Marcello Crucianelli, Andrea Lazzarini) -
Advanced Oxide-Based Materials for Photocatalytic Applications
(Editor: Massimo Calamante) -
Advanced Photocatalytic Materials for Water Treatment
(Editor: Dror Avisar) -
Advances in Homogeneous and Heterogeneous Catalysis
(Editors: Blaž Likozar, Miha Grilc) -
Advances in Nanostructured Catalysts
(Editor: Youn Jeong Jang) -
Advances in Organocatalysts: Synthesis and Applications
(Editors: Erika Bálint, József Kupai) -
Carbohydrates: Origin and Destination of New Materials
(Editor: Araceli García) -
Catalysts and Catalytic Processes
(Editors: Anne M. Gaffney, Gennaro J. Maffia) -
Catalysts for Energy and Environmental Applications
(Editor: Rodica Zavoianu) -
Catalysts: Preparation, Catalytic Performance and Catalytic Reaction
(Editors: Gina Pecchi, Cristian H. Campos) -
Effect of Surface Properties and Mobility in Chemical Reactions and Catalysis
(Editor: Antonio Gil Bravo) -
Electrocatalysts for Sustainable Energy and Chemical Synthesis Applications
(Editors: Alessandro Monteverde Videla, Luigi Osmieri) -
Feature Paper in Section Catalytic Materials
(Editors: Simona Bennici, Ilenia Rossetti) -
Heterogeneous Catalysts for Energy and Environmental Applications
(Editors: Maria Luisa Testa, Giuliana Magnacca, Rafael Estevez) -
Heterogeneous Catalysts Synthesis and Characterization
(Editors: Irina L. Simakova, Dmitry Yu. Murzin) -
Materials Design for Pollutant Sensing and Environmental Remediation
(Editors: Rita Giovannetti, Marco Zannotti) -
Materials for Catalytic CO2 Reduction
(Editor: Barbara Pawelec) -
Materials for Light-Assisted Catalytic Reactions
(Editors: Jason Scott, Emma C. Lovell) -
Metal Organic Frameworks and Applications in Catalysis
(Editors: Francisco G. Cirujano, Isabel Abánades Lázaro, Nuria Martín) -
Metal-based Heterogeneous Catalysts for Hydrogen Generation/Production
(Editor: Umit Bilge Demirci) -
Molybdenum-, Vanadium-, and Tungsten-Containing Materials for Catalytic Applications
(Editors: Dominique Agustin, Jana Pisk) -
Nanocatalysts for Dye-Sensitized Solar Cells
(Editor: Syed Ghufran Hashmi) -
Nanocatalysts for Oxidation and Combustion
(Editors: Debora Fino, Marco Piumetti) -
New Advances in Heterogeneous Catalysis Materials
(Editor: Klaus Stowe) -
New Trends in Semiconductors' Catalytic Application
(Editors: Klára Hernádi, Zsolt Pap, Tünde Alapi) -
Oxide-Based Materials for Sustainable Catalytic Processes
(Editors: Delia Gazzoli, Elisabetta Rombi) -
Photocatalysis: Recent Developments and Technological Advancements
(Editor: Wilfried Wunderlich) -
Photocatalytic Properties and Kinetics of Materials
(Editor: Diana Sannino) -
Recent Advance in Photocatalysts Materials
(Editor: Karin Larsson) -
Smart Materials in Environmental Science
(Editors: Maria Harja, Gabriela Ciobanu) -
Sustainable Catalytic Materials for Selective Oxidation and Energy Applications
(Editors: Mihaela Florea, Florentina Neatu)
Carbon Materials 266 Articles
Prof. Dr. Stefano Bellucci
Current Special Issues (38)
-
Advanced Biomass-Derived Catalysts
(Editors: José Rodríguez Mirasol, María José Valero-Romero) -
Advanced Carbon Materials in Water Treatment or Separations Technology
(Editor: Christopher J. Arnusch) -
Advanced Graphene and Graphene Oxide Materials
(Editors: Victoria Samanidou, Eleni Deliyanni) -
Advanced Low Dimensional Nanocarbon Based Silica Composites
(Editor: Gabriela Mera) -
Advanced Materials for Electrocatalysis of Oxygen
(Editors: Vincenzo Baglio, Carmelo Lo Vecchio) -
Advances in Synthetic Diamond Materials
(Editor: Kazimierz Fabisiak) -
Biomedical and Environmental Applications of Graphene and Graphene Oxide
(Editors: Lukáš Richtera, Vojtěch Adam) -
Biomedical Application of Carbon Nanostructure Modifications
(Editor: Olga E. Glukhova) -
Carbon Based and Silicon Based Nanomaterials
(Editor: Aristides D. Zdetsis) -
Carbon Materials Applied for Biomass Conversion
(Editors: Ana Belén Dongil, Andreia F. Peixoto) -
Carbon Materials for Energy Storage
(Editor: Young Soo Yun) -
Carbon Nanostructures: Synthesis, Characterization, Properties, and Applications
(Editor: Kamila Sadowska) -
Carbon-Based Materials
(Editor: Julia A. Baimova) -
Cellulose Nanofibers: Fabrication and Application
(Editors: Quim Tarrés Farrés, Marc Delgado-Aguilar) -
Conducting Polymers, Composites and Polymer Blends
(Editor: Mária Omastová) -
Development and Applications of Advanced Carbon Materials
(Editors: Agustín Francisco Pérez-Cadenas, María Pérez-Cadenas, Esther Bailón-García) -
Electrical, Thermal and Optical Properties of Nanocarbon Materials
(Editor: Dawid Janas) -
Electrical, Transport and Optical Properties of Multifunctional Carbon Films
(Editors: Yuri Svirko, Polina Kuzhir) -
Feature Paper in Section Carbon Materials
(Editor: Stefano Bellucci) -
Functional Carbon-based Nanomaterials and Nanocomposites
(Editors: Hyungwoo Kim, Doojin Lee, Won Seok Chi) -
Functionalized Graphene-Based Nanocomposites for Energy Applications
(Editor: Piotr Kula) -
Graphene-Based Materials, Their Composites and Potential Applications
(Editors: Maria Cristina Ramirez, Maria Isabel Osendi) -
Hybrid Graphene Materials for Energy Applications
(Editor: Changshin Jo) -
Innovative Technologies in Carbon Based Materials
(Editor: Dinara Sobola) -
Low-Dimensional Carbon Nanostructures and Their Applications in Advanced Composite Materials and Devices
(Editors: Ondřej Jankovský, Zbyšek Pavlík) -
Magnetic Properties of Carbon Nanomaterials
(Editor: Stefano Bellucci) -
Modeling and Mechanics of Carbon-Based Nanostructures and Electronic Devices
(Editor: Olga E. Glukhova) -
New Advances in SiC-Based Composite Materials
(Editors: Javier Narciso, Mario R. Caccia) -
New Findings in Carbon-Based Materials: From Functionalization to Applications
(Editor: Marek Wiśniewski) -
Numerical Modelling of Mechanical Behaviour of Carbon and Non-carbon Nanotubes and Their Complex Structures
(Editor: Nataliya A. Sakharova) -
Recent Progress in Graphene and 2D Materials
(Editors: Jae Young Choi, Jae-Hyun Lee) -
Single-Walled Carbon Nanotube Based Materials and Applications
(Editors: Benoit Lessard, Nicole A. Rice) -
Structure, Function and Mechanics of Low-Dimensional Materials and Their Assemblies
(Editors: Xiaoyan Li, Yang Lu, Hui Wu) -
Surface and Interface Engineering for Organic Device Applications
(Editor: Ju-Hyung Kim) -
Synthesis and Application of Carbon Gels
(Editors: Esther Bailon-Garcia, Agustín Francisco Pérez-Cadenas) -
Synthesis and Characterization of Nanocarbon Materials
(Editor: Sook Young Moon) -
Synthesis, Modeling and Characterization of Graphene, Graphene based Nanocomposites and Nanostructured Materials
(Editors: Alessandro Giuseppe D’Aloia, Hossein Cheraghi Bidsorkhi)
Materials Chemistry 409 Articles
Prof. Dr. Teofil Jesionowski
Current Special Issues (104)
-
Adsorbents and Their Applications
(Editor: Agata Jakóbik-Kolon) -
Advanced Eco-Technology and Materials in Water Treatment
(Editors: Ecaterina Matei, Andra Mihaela Predescu, Ruxandra Vidu) -
Advanced Electrode Materials Dedicated for Electroanalysis
(Editors: Sławomira Skrzypek, Mariola Brycht, Barbara Burnat) -
Advanced Metal Chelate Complexes: Quantum-Chemical Consideration
(Editor: Oleg V. Mikhailov) -
Advanced Surface Analysis of Organic and Inorganic Materials
(Editor: Alex Bondarchuk) -
Advances in Characterization of Materials Based on Dispersed Systems
(Editors: Luis Alfonso Trujillo-Cayado, Jenifer Santos) -
Advances in Crystal Growth Research
(Editor: Tao He) -
Advances in Magnetoelectric Materials and Devices
(Editor: Mirza Bichurin) -
Advances in Polycondensate Polymerization Techniques
(Editor: Stamatina N. Vouyiouka) -
Advances in Polymer-Matrix Composites
(Editor: Albertino Arteiro) -
Anodized Materials and Their Applications
(Editor: Marta Michalska-Domańska) -
Atom Transfer Radical Polymerization (ATRP) in Synthesis of Precisely Defined Polymers
(Editor: Paweł Chmielarz) -
Bioactive Compounds and Complexes: Synthesis, Structural, and Physicochemical Studies
(Editors: Liliana Mazur, Katarzyna Jarzembska) -
Biobased Adhesives for Composite Materials
(Editors: Eduardo Robles, Bertrand Charrier, Grzegorz Kowaluk) -
Biodegradation or Biodeterioration of Non-Metallic Materials
(Editor: Beata Gutarowska) -
Characterisation and Application of Synthesized Gold Nanoparticles
(Editors: René Kizek, Pavel Suchý, Bozena Hosnedlova) -
Characterization and Mechanics of Soft Materials
(Editors: Victoria Vitkova, Galya Staneva) -
Chitosan-Based Materials
(Editors: Lidija Fras Zemljič, Simona Strnad) -
Circular Materials
(Editors: Vincent Verney, Qian Zhou) -
Computational Simulation and Experimental Investigations on Corrosion of Materials
(Editors: Helena Vasconcelos, Juan José Santana Rodríguez) -
Coordination Polymers: Synthesis, Crystal Structure and Multifunctional Applications
(Editor: Andrei S. Potapov) -
Crystal Chemical Design of Inorganic Materials: From Structural Features to Advanced Physical Properties
(Editors: Sergey M. Aksenov, Dina V. Deyneko) -
Crystal Growth and Structure
(Editor: Agnieszka Czylkowska) -
Design and Development of Plasmonic Functional Materials
(Editor: Dominic Zerulla) -
Detectors for Assessment of Natural Radioactivity in Drinking Water: Materials and Method
(Editors: Francesco Caridi, Michele Guida) -
Development of Mechanical, Corrosion Resistance, and Antibacterial Properties of Steels
(Editors: Crtomir Donik, Marjetka Conradi) -
Dyes: Synthesis, Properties, and Applications
(Editor: Lucinda V. Reis) -
Electrochemical Behavior and Antibacterial Propeties of Complexes
(Editor: Amirmansoor Ashrafi) -
Emergent Materials by Supramolecular Chemistry
(Editors: Mihaela Matache, Niculina D. Hădade) -
Environmentally Sustainable Materials and Fabrication Techniques
(Editor: Luisa Barbieri) -
Environmentally Sustainable Solutions to Polymeric Waste Materials
(Editor: Valentina Beghetto) -
Environmentally-Friendly Materials in Wastewater Treatment
(Editors: Inga Zinicovscaia, Magdalena Balintova) -
Experimental and Theoretical Studies on the Structure of Organometallic Complexes
(Editor: Juan F. Van der Maelen) -
Feature Paper in Section Materials Chemistry
(Editor: Halina Kaczmarek) -
Fiber Reinforced Polymers for Structural Strengthening
(Editor: Jose Sena-Cruz) -
Fiber Spinning: Materials & Techniques
(Editor: Valery Kulichikhin) -
Frontiers in Self-Assembly of Supramolecules
(Editor: Xiaodong Chi) -
Functional Materials by Circular Chemistry Approaches
(Editors: Silvia Gross, M. Lucia Curri) -
Functionalized Silica Materials: Preparation and Applications
(Editor: Ana-Maria Putz) -
Glass-Ceramics: Materials, Synthesis and Applications
(Editor: Acacio Rincon Romero) -
Glass-Ceramics: Structural Investigations and Luminescence Properties
(Editors: Philippe Thomas, Sebastien Chenu) -
Green Synthesis and Transformation in Material Science
(Editors: Cristina Della Pina, Ermelinda Falletta, P.M. Visakh) -
Growth and Properties of Crystal Materials
(Editor: Lei Zhang) -
High Entropy Materials: From Fundamentals to Applications
(Editor: Nikita Stepanov) -
Hybrid Materials for Environmental Application
(Editor: Dorota Kołodyńska) -
Hydrogen Storage: Materials, Methods and Perspectives
(Editor: Tomasz Czujko) -
Innovative Plasma-Based Deposition Techniques for the Production of Functional Materials
(Editors: Ondřej Kylián, Andrei Choukourov) -
Inorganic Metal-to-Ligand Clusters
(Editors: Beñat Artetxe, Santiago Reinoso) -
Layered Crystal Materials: Design, Synthesis and Characterisation
(Editor: Evgeny V. Nazarchuk) -
Liquid Crystal Display for X-ray Detection in Real Time
(Editor: Adam Januszko) -
Macrocyclic Compounds—Synthesis, Properties and Applications
(Editor: Jarosław Romański) -
Magnetic Particles for Use in Separations
(Editor: Domingos Barbosa) -
Magnetite Nanocomposites: Dielectric and Thermal Response
(Editor: Athanasios Kanapitsas) -
Materials Synthesis by Sol-Gel Technology
(Editor: Maria Clara Gonçalves) -
Materials under Pressure
(Editors: Yongmoon Lee, Donghoon Seoung) -
Mechanical Properties of Polymers, Polymer Blends and Composites Processed through 3D Printing
(Editor: José-Marie Lopez-Cuesta) -
Mechanics, Fatigue and Fracture of Metallic Materials
(Editor: Zbigniew Marciniak) -
Microwave Processing of Materials and Applications
(Editor: Kirill Rybakov) -
Mineralization of Metals through Bio Activities
(Editor: Michio Suzuki) -
Natural Minerals as Smart Materials for Advanced Technologies
(Editor: Myroslav Sprynskyy) -
New Advances in Physical Properties of Block Copolymers
(Editor: Shinichi Sakurai) -
New Emerging Materials and Their Applications in the Development of Electrochemical Sensors
(Editor: Carmel Breslin) -
New Findings of Magnetic Metal-Organic Framework Compounds
(Editor: Marijana Jurić) -
New Materials and Technologies for Wastewater Treatment
(Editors: Lionel Limousy, Thomas Thiebault, Jocelyne Brendle) -
Novel Bioactive Macrolides: Design, Preparation, Properties
(Editors: Predrag Novak, Tomislav Jednačak) -
Novel Materials in Advanced Oxidation Processes for Water Treatment
(Editor: Cristina Pablos) -
Novel Polymeric Materials for High-Performance and Biomedical Applications
(Editors: Alexandra Bargan, Anca Filimon) -
Organic Luminescent Materials
(Editor: Samuel Guieu) -
Organic Materials and Hybrid Metal-Organic Materials
(Editor: Javier Marti-Rujas) -
Personal Protective Materials (PPMs) re COVID-19
(Editor: George K. Stylios) -
Photocatalytic Materials for Environment Treatment and Energy Production
(Editor: Luminiţa Isac) -
Physico-Chemical Analysis of Engineered Nanomaterials
(Editors: Erika Andrea Levei, Oana Cadar) -
Polymers and Injection Molding Simulation
(Editor: Mónica S. A. Oliveira) -
Polymers Assembly and Applications
(Editor: Julia V. Kostina) -
Porphyrins Chemistry in Material Science
(Editor: Pietro Tagliatesta) -
Proton-Exchange Membranes: Advances and Applications
(Editor: Zhiqing (Ken) Shi) -
Recent Advances in Coatings, Adhesives and Construction Materials
(Editors: Maria Zielecka, Anna Rabajczyk) -
Recent Advances in Polymer and Polymer Composite Membranes
(Editor: Simona Caprarescu) -
Recent Advances in Polymer Synthesis and Modification
(Editor: Rafał Malinowski) -
Recent Developments in Photoinitiators
(Editor: hab. Joanna Ortyl) -
Recent Progress in Electrode Materials for Sodium-Ion Batteries
(Editors: Alain Mauger, Christian M. Julien) -
Research of Organic Molecules and Materials for Biological Application
(Editors: Jacek Ścianowski, Marek Krzeminski) -
Self-Healing Materials and Devices
(Editors: Xinxing Zhang, Doina Dimonie) -
Shape Memory Alloys: Modeling and Engineering Applications in Civil Engineering
(Editor: Eunsoo Choi) -
Sol-Gel-Derived Materials
(Editor: Bruno Capoen) -
Solid State Chemistry Enabling Clean Technologies
(Editor: Radostina Stoyanova) -
Solvated Metal Ions: from Solution to Solid
(Editor: Mikhail Skripkin) -
Spontaneous Self-Assembly of Spatially Ordered Structures
(Editor: Myunghwan Byun) -
Structure, Dynamics, and Phase Equilibria of Colloidal Dispersions
(Editor: Ruggero Angelico) -
Superconductors: Materials, Properties and Applications
(Editor: Vilém Bartůněk) -
Supercritical Processing and Applications in Materials
(Editor: Lucia Baldino) -
Surface Modification of Metallic Materials
(Editors: Carla Martini, Ramona Sola) -
Surface-Tension-Driven Flows for Shaping and Fragmenting Matter on the Submillimeter Scale
(Editor: José María Montanero) -
Synthesis and Antifouling Applications of Polymer Films and Coatings
(Editors: Christine Bressy, André Margaillan) -
Synthesis of Silicon Carbide—From Nano- to Bulk Single Crystals
(Editor: Didier Chaussende) -
Synthesis, Analysis and Applications of Oxide Nanomaterials
(Editor: Yuan-Chang Liang) -
Synthesis, Modification, and Application of Polymer Sorbents
(Editor: Dorota Kołodyńska) -
Synthesis, Properties and Applications of Functional Polymers
(Editors: Marta Grochowicz, Magdalena Sobiesiak) -
Synthesis, Properties and Applications of Polymer Blends
(Editor: Domagoj Vrsaljko) -
The Research of Inorganic Nanomaterials
(Editor: Sotirios Christodoulou) -
Thermoluminescence Properties of Glass and Glass-Ceramics
(Editor: Wojciech Gieszczyk) -
Trends and Prospects in Surface Engineering
(Editor: Krzysztof Rokosz)
Materials Physics 440 Articles
Prof. Dr. Vlassios Likodimos
Topical Collections (2)
-
Magnetic Materials and Applications
(Collection Editors: Michael R. Koblischka, Anjela Koblischka-Veneva) -
Surface and Interface Engineering
(Collection Editor: Belén Díaz Fernández)
Current Special Issues (84)
-
Adsorption and Desorption Behavior for Rare Earth Metal Ions
(Editors: Adina Negrea, Narcis Duteanu) -
Advanced Nanoindentation in Alloys
(Editor: In-Chul Choi) -
Advanced Semiconductors for Photonics and Electronics
(Editor: Joana Dória Vaz Pinto) -
Advances in Acoustic Metamaterials
(Editors: Marco Miniaci, Federico Bosia) -
Advances in Creep of Metals and Alloys
(Editors: Ricardo Fernández Serrano, Qiang Xu) -
Advances in Electrochromic Materials and Related Devices
(Editor: George Leftheriotis) -
Advances in Mechanical Metamaterials
(Editors: Muamer Kadic, Tobias Frenzel) -
Advances in Micromechanical Behavior of Materials
(Editor: Elena Ferretti) -
Advances in Multiferroics
(Editor: John Heron) -
Advances in Novel Ceramic Materials for Laser Applications
(Editor: Angela Pirri) -
Advances in Superconducting Materials: Characterization, Properties and Applications
(Editor: Yong Seung Kwon) -
Advances in Thermoelectric Materials and Devices
(Editors: Li-Dong Zhao, Lidong Chen) -
Challenges and Opportunities of Superconducting Materials for Future Applications
(Editors: Gaia Grimaldi, Antonio Leo, Armando Galluzzi) -
Creep and Fracture Mechanisms of Heat-Resistant Steels
(Editor: Valeriy Dudko) -
Creep and High Temperature Deformation of Steels and Alloys
(Editor: Jiri Svoboda) -
Design and Analysis of Novel Materials and Structures in the THz Frequencies
(Editor: Carlito S. Ponseca, Jr.) -
Design, Manufacturing, and Properties of Refractory Materials
(Editors: Jacek Szczerba, Ilona Jastrzębska) -
Dynamic Behaviour of Materials and Its Applications in Industrial Processes
(Editors: Alexis Rusinek, Amine Bendarma) -
Dynamic Behaviour of Metallic Materials
(Editors: Alexis Rusinek, Marcos Rodríguez Millán) -
Electron Beam Processing of Materials
(Editor: Katia Vutova) -
Fatigue Crack Growth in Metallic Materials
(Editor: Fernando Ventura Antunes) -
Feature Papers in Materials Physics
(Editors: Vlassios Likodimos, Xiangyang Ma, Andres Sotelo) -
First Principles Electronic Structure and Molecular Dynamics
(Editor: Davide Ceresoli) -
Fracture Mechanics Investigation of Polymeric Materials
(Editors: Gerald Pinter, Florian Arbeiter) -
Friction and Wear of Materials Surfaces
(Editor: Andrzej Dzierwa) -
Graphene and Other 2D Layered Nanomaterials and Hybrid Structures: Synthesis, Properties and Applications
(Editors: Federico Cesano, Domenica Scarano) -
Growth and Characteristics of Nitride Semiconductor Layers
(Editor: Mike Leszczynski) -
Growth and Characterization of Bulk Crystals
(Editor: Daniel Vizman) -
Hot Deformation and Microstructure Evolution of Metallic Materials
(Editor: Ivo Schindler) -
Interface Dominated Phenomena: Segregation, Nucleation and Phase Transformations
(Editors: Rebecca Janisch, Sergiy V. Divinskiy) -
Interfacial and Transport Phenomena between Liquid Metal and Solid Structural Materials
(Editors: Donatella Giuranno, Wojciech Polkowski) -
Lifetime Prediction and Fracture and Damage Mechanics of Microelectronic Systems
(Editors: Olaf van der Sluis, Bernhard Wunderle, Abhijit Dasgupta) -
Linear and Non-Linear AC Magnetic Susceptibility for the Study of Superconducting and Magnetic Materials
(Editors: Massimiliano Polichetti, Armando Galluzzi) -
Machinability of Metallic Materials and Composites
(Editor: Victor Songmene) -
Magnetic Compounds: From Fundamentals to Applications
(Editor: Yin Zhang) -
Magnetic Materials: Synthesis, Structure, Properties, Applications, Modeling and Simulation of Magnetization Processes
(Editor: Ovidiu Florin Caltun) -
Magnetic Methods in Metal–Organic Materials and Environmental Science
(Editors: Tadeusz Szumiata, Roman Szewczyk) -
Magnetocaloric and Thermoelectric Properties of Inorganic Materials
(Editor: Jerzy Goraus) -
Magnetoelastic Materials
(Editor: Roman Szewczyk) -
Materials Investigations in Mechanical Systems
(Editors: Jan Awrejcewicz, Virgil-Florin Duma) -
Materials Science and Applications of Phase Change Memory Materials
(Editor: Andriy Lotnyk) -
Materials Thermal Behavior during Laser or Electron Beam Irradiation
(Editors: Mihai Oane, Ion N. Mihailescu, Carmen Ristoscu) -
Mechanical Alloying: Fundamentals and Applications
(Editors: Pee-Yew Lee, Chung-Kwei Lin) -
Mechanical and Metallurgical Characterizations of Advanced Alloys
(Editor: Yong Chae Lim) -
Mechanical and Physical Properties of Metallic Composites
(Editor: Pavel Lukáč) -
Mechanical Properties of Technical Materials
(Editor: Ján Valíček) -
Metallic Multilayers: Structures, Growth and Properties
(Editors: Michael Stüber, Karsten Woll) -
Microstructure and Mechanical Properties of Alloys
(Editor: João Pedro Oliveira) -
Microstructure and Mechanics of Metallic Materials
(Editor: Olivier Bouaziz) -
Microstructure, Mechanical Properties, and Biomedical Applications of Magnesium-Based Alloys
(Editors: Dmitry Lvovich Merson, Alexei Vinogradov, Yoshihito Kawamura) -
Microstructure, Tribological and Corrosion Behaviors of Thermally Sprayed and Laser Treated Coatings
(Editor: Sarka Houdkova) -
Modelling of Viscoelastic Materials and Mechanical Behavior
(Editor: Angelo Morro) -
Models and Methods for Molecular Dynamics Simulations and Their Applications
(Editor: Vasily Oganesyan) -
Multiferroic and Magnetoelectric Materials: Fundamentals and Applications
(Editors: Senentxu Lanceros-Mendez, Pedro Martins) -
Novel Materials for CO2 Separation
(Editor: Nikolaos Kanellopoulos) -
Novel Thermoelectric Materials and Device Design Concepts
(Editor: Jong-Soo Rhyee) -
Organometallic Compounds: Structure, Physical Properties, and Applications
(Editor: Silviu Polosan) -
Perovskite Crystals and Thin Films
(Editor: Oldrich Zmeskal) -
Plasma Processing, Synthesis, and Nanomaterials
(Editors: Danil Dobrynin, Carles Corbella Roca) -
Quality Management Tools in the Design of Materials for Special Purposes
(Editor: Dorota Klimecka-Tatar) -
Radiation Damage in Materials: Coupled Extreme Environments
(Editors: Yongqiang Wang, Khalid Hattar) -
Radiation Effect on Polymeric Materials
(Editor: Miroslav Maňas) -
Recent Advances of Luminescent Materials and Devices in Optics and Photonics
(Editors: Joanna Pisarska, Dominik Dorosz, Radosław Lisiecki) -
Research about Friction and Wear Modeling for Materials
(Editors: Izhak Etsion, Haibo Zhang) -
Research in Structural and Magnetic Properties of Ferromagnetic Materials
(Editor: Tatyana Koutzarova) -
Research on Fatigue Behavior of Metals and Alloys
(Editor: Sergey V. Konovalov) -
Research on Tribological Properties of Materials and Coatings
(Editors: Wiesław Graboń, Thomas G. Mathia, Marek Goral) -
Rheology of Advanced Complex Fluids
(Editor: Yannis Dimakopoulos) -
Rheology of Functional and Self-Assembly Materials
(Editor: Ngoc A. Nguyen) -
SiC Materials and Applications
(Editor: Yasuto Hijikata) -
Soft Materials and Interfaces
(Editor: Byung Mook Weon) -
Structure and Properties of Crystalline and Amorphous Alloys
(Editor: Rafał Babilas) -
Study on Cyclic Mechanical Behaviors of Materials
(Editors: Halina Egner, Stanisław Mroziński) -
Superconducting Materials for Applications
(Editors: Michael R. Koblischka, Douine Bruno, Kévin Berger, Leveque Jean, Philippe Vanderbemden) -
Surface Functionalization and Engineering for Advanced Materials
(Editors: Giorgio Speranza, Mariangela Fedel) -
Surface in Fatigue/Wear Loadings and Damage Developments
(Editor: Farhad Rezai-Aria) -
Surface Performance and Wear Mechanisms of Coatings
(Editor: Alexey Vereschaka) -
Surface Processing of Steels: Materials, Techniques and Applications
(Editor: Milena Kušnerová) -
Sustainability and Life Cycle: Compatibility and Mechanical Properties of Natural Fillers and Polymers
(Editors: Peré Mutjé, Quim Tarrés Farrés, Carlos Pozo) -
Synthesis, Design, Characterization of Unconventional Superconducting Materials
(Editors: Gianluca Ghigo, Daniele Torsello) -
The Electrophysical Properties of Ceramic Materials
(Editor: Dariusz Bochenek) -
Thermophysical Properties of Materials
(Editor: Anton Trník) -
Topological Approaches to 2D Multielectron Correlated States
(Editors: Lucjan Jacak, Janusz E. Jacak) -
ZnO Materials: Synthesis, Properties and Applications
(Editors: Ana Pimentel, Daniela Nunes)
Optics and Photonics 124 Articles
Prof. Dr. Valery V. Tuchin
Current Special Issues (51)
-
Acousto-Optical Spectral Technologies
(Editors: Alexander S. Machikhin, Vitold Pozhar) -
Advanced Laser Fabrication of Optical Materials and Their Applications
(Editor: Vytautas Purlys) -
Advanced Luminescent Materials and Devices
(Editor: Dirk Poelman) -
Advanced Magneto-Optical and Luminescence Materials
(Editor: Andrzej Kruk) -
Advanced Materials for Biophotonics Applications
(Editors: Valery V. Tuchin, Malgorzata Szczerska) -
Advanced Materials for Optical Applications and Devices
(Editor: Hélène Serier-Brault) -
Advanced Materials for Optical Fibers
(Editors: Sylvain Danto, Thierry Cardinal, Lei Wei, Marcelo Nalin) -
Advanced Materials for Photonics and Photovoltaics Applications
(Editors: Fernando B. Naranjo, Susana Fernández) -
Advances in Functional Materials and Nanodevices
(Editor: Hongliang Zhang) -
Advances in Glass and Glass-Ceramic Materials
(Editor: Paweł Stoch) -
Advances in Light-Emitting Structures and Materials
(Editors: Toufik Sadi, Nicklas Anttu) -
Advances in Liquid Crystalline Materials—Beyond the Visible
(Editor: Przemysław Kula) -
Advances in Optically Functional Glass
(Editors: Hirokazu Masai, Chao Liu, Shifeng Zhou) -
Artificial Plasmonic Colors
(Editors: Piotr Nyga, Alexander V. Kildishev) -
Band Gaps in Phononic Crystals and Metamaterials in Static and Moving Medium
(Editors: Sebastian Garus, Wojciech Sochacki) -
Electronic and Optical Properties of Heterostructures
(Editor: Witold Rzodkiewicz) -
Electronic Structure of Luminescent Materials
(Editor: Jonas Joos) -
Feature Paper in Section Optics and Photonics
(Editor: Valery V. Tuchin) -
Glasses and Thin Films for Nanophotonics and Integrated Optics
(Editor: M. Clara Gonçalves) -
Integrated Photonics
(Editor: Thomas Schneider) -
Laser Applications in Micromachining and Surface Functionalization of Materials
(Editors: Tim Kunze, Sabri Alamri) -
Light-Matter Interactions in New Materials and Meta-Architectures
(Editor: Mario Miscuglio) -
Magneto-Optical Properties of Thin Films and Nanostructures
(Editor: Roman Antoš) -
Materials Light Life
(Editor: Nikolaos A. Vainos) -
Multifunctional Optical Nanomaterials
(Editor: Mauricio E. Calvo) -
Nano-Opto-Mechanics
(Editor: Alexander Shalin) -
Nanocomposite Gratings, Applications and Optical Properties
(Editor: Jürgen Klepp) -
Novel Laser Ceramic Materials and Applications
(Editors: Hiroaki Furuse, Ryo Yasuhara) -
Novel Optical and Photonic Glass-Based Materials: Synthesis, Characterization and Application
(Editors: Laeticia Petit, Arnaud Lemiere) -
Optical Coatings: Application and Metrology
(Editor: Paola Zuppella) -
Optical Materials for White Light Emitting Diodes (WLEDs)
(Editors: Arturas Katelnikovas, Simas Sakirzanovas) -
Optical Methods for Characterization of Biological Materials
(Editor: Ilya Digel) -
Optical Properties and Application Prospects of Novel Epitaxial Nanostructures
(Editor: Grzegorz Sęk) -
Optical Properties of Rare-Earth Doped Nanostructured Materials
(Editor: Mihail Secu) -
Optical Properties of Two Dimensional Materials
(Editor: Nataša Vujičić) -
Optical Spectroscopy of Low-Dimensional Quantum Materials
(Editor: Felice Gesuele) -
Optoelectronic Devices: 2021
(Editor: Ya-Ju Lee) -
Perovskite Materials for Photovoltaic Applications
(Editor: Andreja Gajović) -
Photoactive Materials: Synthesis, Applications and Technology (Second Volume)
(Editor: Pierre-Alexandre Blanche) -
Photonic Materials for Optical Waveguide Application
(Editor: Marcin Kochanowicz) -
Rare Earth Doped Glasses/Ceramics: Synthesis, Structure, Properties, and Optical Applications
(Editor: Wojciech Pisarski) -
Recent Advances in Photoinitiators for Polymerization
(Editor: Janina Kabatc) -
Recent Advances in Photonic Materials and Devices
(Editor: Michał Borecki) -
Recent Advances in Photonic Sensors
(Editor: Piotr Lesiak) -
Soft Materials and Optical Devices
(Editor: Jun-Hee Na) -
Soft Photonic Crystals and Metamaterials
(Editors: Ivan V. Timofeev, Wei Lee) -
Structural, Optical and Thermal Properties of Thermochromic Composites
(Editor: Marta Klanjšek Gunde) -
Synthesis, Characterization, and Degradation of Advanced Optical and Photo-Active Materials
(Editors: Willem D van Driel, Maryam Yazdan Mehr)
Corrosion 268 Articles
Prof. Dr. Raman Singh
Topical Collections (1)
-
Materials and Coatings for Extreme Environments
(Collection Editor: Judit Telegdi)
Current Special Issues (25)
-
Advances in Surface Modification on Microstructure and Properties of Metals
(Editors: Mingchun Zhao, Dengfeng Yin) -
Anodizing of Metals: From Corrosion Protection to Advances in Nanotechnology and Emerging Applications
(Editors: Wojciech Stepniowski, Małgorzata Norek) -
Corrosion and Corrosion Inhibition of Metals and Their Alloys
(Editor: Bożena Łosiewicz) -
Corrosion and Degradation for Biomedical Materials
(Editor: Virginie Roche) -
Corrosion Behaviour in Concrete
(Editor: Frank Collins) -
Corrosion Inhibitors for Steel: Experimental and Theoretical Studies
(Editor: Abdul Shaban) -
Corrosion Management in a Digital World
(Editor: Andrew Spowage) -
Corrosion of Reinforced Concrete Structures in Civil Engineering and Architecture
(Editors: David M. Bastidas, Jose M. Bastidas) -
Corrosion Properties and Mechanism of Steels
(Editor: Vít Křivý) -
Corrosion Resistance Enhancement of the Materials Surface
(Editors: Costica Bejinariu, Nicanor Cimpoesu) -
Corrosion Resistance of Alloy and Coating Materials
(Editor: Zbigniew Brytan) -
Design, Development and Application of Novel Antibacterial Metals
(Editor: Chunguang Yang) -
High Temperature Corrosion of the Structural Materials and Degradation of Coatings in Harsh Conditions
(Editors: Nigel Simms, Tomasz Dudziak) -
High-Entropy Alloy and Compositionally Complex Alloys: Challenges and Prospects for Applications in Corrosive Environments
(Editors: Sigrún Nanna Karlsdóttir, Ioana Csaki) -
Magnesium and Its Alloys as Biodegradable Implants
(Editors: Mirco Peron, Bertolini Rachele) -
Microstructure and Corrosion Behavior of Advanced Alloys
(Editor: Marián Palcut) -
Non-Destructive Evaluation and Analysis of Materials after Manufacturing
(Editors: Andrej Czán, Michal Šajgalík) -
Performance and Degradation Mechanisms of Electrode Materials for Solid Oxide Cells Devices
(Editors: Marc Torrell, Miguel Ángel Laguna Bercero) -
Progress in Designing of Tribological Materials and Coatings
(Editor: Jerzy Ratajski) -
Recent Advances in Corrosion and Bio-Fouling Resistant Coatings
(Editor: Hao-Cheng Yang) -
Self-Assembled Films for Improved Corrosion Resistance
(Editors: Helena Otmačić Ćurković, Saman Hosseinpour) -
Structure and Mechanical Properties of Protective Alloy Coatings
(Editor: Juliusz Winiarski) -
Tribological and Corrosive Investigations in Advanced Nanomaterials
(Editor: Michal Cichomski)
Construction and Building Materials 1277 Articles
Prof. Dr. Eddie Koenders
Current Special Issues (131)
-
Advanced Cement and Concrete Composites
(Editor: Moncef L. Nehdi) -
Advanced Civil Engineering Materials: From Synthesis to Application
(Editor: Łukasz Sadowski) -
Advanced Construction Materials and Processes in Poland
(Editor: Łukasz Sadowski) -
Advanced Fiber-Reinforced Concrete Composites
(Editor: Bang Yeon Lee) -
Advanced Steel Composites in Construction Engineering
(Editor: Jiho Moon) -
Advanced Structural Concrete Materials in Bridges
(Editor: Eva O.L. Lantsoght) -
Advances in Asphalt Materials
(Editor: Marek Iwański) -
Advances in Cement-Based Materials: Mechanical Behavior, Rheology, and Radiology
(Editor: María del Mar Alonso López) -
Advances in Concrete and Steel Technology and Simulation
(Editor: Jiří Kala) -
Advances in Construction and Building Materials
(Editor: Bora Gencturk) -
Advances in Green Construction Materials
(Editor: Yann Malecot) -
Advances in Lime and Lime-Based Materials
(Editor: Giovanni Pesce) -
Alkali‐Activated Materials for Sustainable Construction
(Editors: Paola Antonaci, Paola Palmero, Jean-Marc Tulliani) -
Application of the Acoustic Emission Method in Concrete Materials
(Editor: Libor Topolář) -
Artificial Intelligence for Cementitious Materials
(Editor: Łukasz Sadowski) -
Asphalt Mixtures with Reclaimed Asphalt Pavement
(Editors: Ignacio Pérez Pérez, Ana R. Pasandín) -
Asphalt Road Paving Materials
(Editor: Marek Iwański) -
Bond Behavior of Externally Bonded and Internal Reinforcement
(Editors: Tommaso D'Antino, Francesco Focacci, Christian Carloni) -
Cementitious Material in Concrete
(Editor: Ki Yong Ann) -
Ceramics and Construction Materials
(Editor: Mangialardi Teresa) -
Characterization of Biopolymer–Concrete Composites in Construction
(Editors: Chadi Maalouf, Guillaume Polidori, Christophe Bliard) -
Characterization of Innovative Asphalt Materials for Use in Pavement Design and Analysis
(Editors: Andrea Graziani, Gilda Ferrotti) -
Circular Economy - Supplementary Cementitious Materials in Binders: Processing, Design, Characterization and Performance
(Editors: Bogdan Stefan Vasile, Adrian Ionut NICOARA) -
Climate Change in Construction and Building Materials
(Editor: Eddie Koenders) -
Composite Systems for Strengthening and Rehabilitation of Concrete and Masonry Structures
(Editors: Jacopo Donnini, Simone Spagnuolo) -
Concrete 3D Printing and Digitally-Aided Fabrication (Second Volume)
(Editor: Arnaud Perrot) -
Concrete and Building Materials
(Editor: Marijana Hadzima-Nyarko) -
Concrete and Concrete Structures Monitored by Ultrasound
(Editors: Christoph Gehlen, Christian Große) -
Concrete in Structural Engineering: Fabrication and Mechanical Behavior
(Editors: Seong Tae Yi, Jong Wan Hu) -
Concrete Materials: Advancement in Materials Design, Manufacturing, and Applications
(Editor: Jeong Gook Jang) -
Concrete Microstructure and Service Life Prediction
(Editor: Yukio Hama) -
Concrete Structures with Fiber-Reinforced Cementitious and Composite Materials
(Editor: Chang-Geun Cho) -
Concrete Technology and Mechanical Properties of Concretes
(Editor: Tomasz Ponikiewski) -
Construction Circular Economy: Recycling Construction and Demolition Wastes
(Editors: Mostafa Seifan, Francesco Pomponi) -
Conventional vs. Innovative Materials, Tradition and Innovation
(Editor: Massimo Latour) -
Corrosion in Concrete: Inhibitors and Coatings
(Editor: Luigi Coppola) -
Development and Applications of Eco-Concrete and Mortars
(Editor: Belén González-Fonteboa) -
Development and Characterization of Bio-Based Insulation Materials
(Editors: Florence Collet, Sylvie Prétot) -
Development and Research of Cementitious Materials
(Editor: Iwona Wilińska) -
Durability of Concrete or Mineral-Asphalt Mixtures with Recycled Aggregates
(Editor: Danuta Barnat-Hunek) -
Effects of Concrete Degradation on Gas Transfer Properties
(Editor: Frédéric Skoczylas) -
Emerging Trends in Structural Health Monitoring
(Editors: Bijan Samali, Maria Rashidi) -
Energy in Construction and Building Materials
(Editor: Antonio Caggiano) -
Environmentally Friendly Materials in Construction
(Editors: Nadezda Stevulova, Adriana Estokova) -
Evaluation of Building Materials of Reinforced Concrete Structures for Durability and Corrosion Resistance
(Editor: Christoph Gehlen) -
Experiment and Computer Simulations with Concrete and Granular Materials
(Editor: Fernando Lopez Gayarre) -
Experimental Testing and Constitutive Modelling of Pavement Materials
(Editors: Xueyan Liu, Linbing Wang, Zhanping You, Yuqing Zhang, Changhong Zhou) -
Fiber Reinforced Materials for Buildings Strengthening
(Editors: Francesco Micelli, Maria Antonietta Aiello) -
Fiber-Reinforced Concrete: Design, Characterization, and Applications
(Editors: Weena Lokuge, Chamila Gunasekara) -
Fracture Mechanics of Fiber Reinforced Concrete
(Editors: Marcos G. Alberti, Jaime C. Galvez, Alejandro Enfedaque) -
Functional Cement-Based Composites for Civil Engineering
(Editor: Jonathan Oti) -
Functionalized Mineral Materials in Environmental and Civil Engineering, Ceramics, Foundry and Metals
(Editors: Tomasz Bajda, Jakub Matusik) -
Geopolymers and Alkali-Activated Materials: Synthesis, Characterization, and Applications
(Editor: Rui Miguel Novais) -
High Performance Concrete
(Editor: Sukhoon Pyo) -
High Performance of Fiber Reinforced Cementitious Composites
(Editor: Alessandro P. Fantilli) -
Innovative Materials and Technologies for Smart Cities
(Editors: Sung-Hwan Jang, Chunhee Cho) -
Innovative Materials for Construction II
(Editors: Mariaenrica Frigione, José Barroso de Aguiar) -
Load Test and Numerical Analysis on Construction Materials
(Editor: Daehyeon Kim) -
Long-Life and Circular Pavement Materials
(Editors: Hussain Bahia, Sandra Erkens, Xueyan Liu, Yue Xiao, Yue Hou) -
Long-Term Behavior of Cementitious Materials and Reinforced Concrete Structures
(Editors: Branko Šavija, Ivan Ignjatovic, Ravi A. Patel) -
Low Carbon Cements
(Editor: Alexandre Bogas) -
Marginal Materials: Characterization and Application in Transport Infrastructure Construction
(Editor: Marco Pasetto) -
Masonry Structures and Reinforced Concrete Structures
(Editors: Łukasz Drobiec, Radoslaw Jasiński) -
Material Modifications of High Performance Concrete Properties
(Editor: Jacek Gołaszewski) -
Material Science in Transportation and Construction Engineering
(Editor: Jan Fořt) -
Materials That Improve the Performance and Functional Properties of Roads Infrastructure
(Editors: Dawid Ryś, Mariusz Jaczewski, Diego Maria Barbieri) -
Mechanical Behavior of Concrete Materials and Structures: Experimental Evidence and Analytical Models
(Editors: Dario De Domenico, Luís Filipe Almeida Bernardo) -
Mechanical Behavior, Leaching and Environmental Evaluation of Recycled Aggregates
(Editors: Adela Pérez Galvín, Auxi Barbudo, Antonio López-Uceda) -
Mechanical Characterization of Gypsum Composites
(Editors: Mercedes del Río Merino, Paola Villoria-Sáez) -
Mix-Design and Behavior of Special Concrete
(Editor: Hugo Costa) -
Modeling of Constitutive Laws for Traditional and Innovative Building Materials
(Editors: Luca Lanzoni, Vittorio Gusella, Patrizia Trovalusci, Antonella Cecchi, Valentina Salomoni, Sabrina Vantadori) -
Multi-Scale Structural Characterization of Cement-Based Composites
(Editors: Qiang Zeng, Chunsheng Zhou, Zhendi Wang, Jiyang Wang, Dongming Yan, Shaoqin Ruan) -
Nanotechnology for Cement Composite Materials
(Editor: Maciej Szeląg) -
New Findings of Portland Cementitious Materials
(Editor: Magdalena Balonis) -
New Materials and Technologies for Road Pavement Maintenance
(Editors: Juan Gallego Medina, Miguel A. Franesqui) -
Nonlinear Dynamics and Applications to Structural Engineering
(Editor: Enrico Babilio) -
Novel and Sustainable Civil Engineering Materials: Eco-Design, Properties and New Processing
(Editors: César Medina Martínez, Holmer Savastano Junior) -
Novel Construction Materials for Sustainable Pavements
(Editor: Chaminda Gallage) -
Novel Lightweight Construction Composites from Agro-Materials and Wastes
(Editor: Adeline Goullieux) -
Novel Sustainable Technologies for Recycling Waste Materials
(Editor: Abbas Mohajerani) -
Performance and Applications of Construction Materials and Structures
(Editor: Jong-Han Lee) -
Polymer in/on Concrete
(Editor: Andrzej Garbacz) -
Preparation and Mechanical Properties of Graphene Oxide Cement Composites
(Editor: Boo Hyun Nam) -
Properties and Applications of Cement-based Composites
(Editor: Hyeong-Ki Kim) -
Properties and Durability of Advanced Concrete and Novel Construction Composites
(Editor: Zbyšek Pavlík) -
Properties and Novel Applications of Recycled Concrete and Mixed Aggregates
(Editors: Francisco Agrela, Julia Rosales) -
Recent Developments in Geopolymers and Alkali-Activated Materials
(Editor: Sujeong Lee) -
Recent Research in the Design of New Sustainable Building Materials
(Editors: Ángel Rodríguez Saiz, Sara Gutiérrez González, Verónica Calderón Carpintero) -
Recovery of Waste Materials: Technological Research and Industrial Scale-Up
(Editor: Franco Medici) -
Recycled Aggregate Concrete and Alternative Binders for Sustainable Building Engineering
(Editors: Miguel Bravo, Rui Vasco Silva, António P.C. Duarte) -
Recycled Aggregate Concretes: From Raw Materials Selection to Field Applications
(Editor: Marco Pepe) -
Recycled Concrete with Waste and By-Products
(Editor: Francisco Agrela) -
Recycling Pavements Materials
(Editors: Giulio Dondi, Claudio Lantieri, Ennia Mariapaola Acerra, Margherita Pazzini) -
Repair and Strengthening of Concrete Structures with Advanced Reinforcements
(Editor: Stijn Matthys) -
Repair and Strengthening of Existing Reinforced Concrete Structures
(Editor: Andreas Lampropoulos) -
Research and Development of Modified Building Materials
(Editor: Maria Stefanidou) -
Research of Mechanical Behavior of Cement and Concrete Composites
(Editor: Gyuyong Kim) -
Research of Structure and Properties of Concretes Based on Non-conventional Aggregates
(Editor: Jacek Katzer) -
Research on Mechanical Properties of Construction Materials
(Editors: Patryk Rozylo, Hubert Debski, Katarzyna Falkowicz) -
Research on Non-destructive Testing in Civil Engineering Materials
(Editor: Mikołaj Miśkiewicz) -
Research on Novel Sustainable Binders, Concretes and Composites
(Editors: Danutė Vaičiukynienė, Vitoldas Vaitkevičius) -
Self-Healing Concrete and Cement-based Materials
(Editors: Kwang-Myong Lee, Chongku Yi) -
Silicate Solid Waste Recycling
(Editors: Yue Xiao, Denis Jelagin, Hongbo Tan, Bohumír Strnadel) -
Smart Concrete for Sustainable Future
(Editor: Andrzej Cwirzen) -
State-of-the-Art Construction Materials in Italy: Challenges for Sustainable, Safe, and Resilient Buildings
(Editor: Francesca Ceroni) -
Structural Assessment of Reinforced Concrete Elements Damaged by Corrosion: Experimental, Numerical and Analytical Studies
(Editors: Mahdi Kioumarsi, Enrique Hernández Montes, Stefania Imperatore) -
Structural Concrete Material: New Trends for Eco-Efficiency and Performance
(Editors: Eduardo Júlio, Alexandre Bogas, Hugo Costa) -
Structural Health Monitoring for Civil Engineering Materials
(Editors: Pizhong Qiao, Hong-Nan Li) -
Structural, Mechanical, and Thermal Properties of Mortars, Cements, and Alternative Composites
(Editor: Jaroslav Pokorný) -
Study of Hydraulic Binders: From Mixing to Setting
(Editor: Maurizio Bellotto) -
Study on Advanced Cement-Based Materials and Their Applications
(Editor: Gintautas Skripkiunas) -
Study on the Modification and Compressive Properties of Concrete Building Materials
(Editor: Silvia Santini) -
Supplementary Cementitious Materials in Concrete
(Editors: Alessandro P. Fantilli, Daria Jóźwiak-Niedźwiedzka) -
Sustainability in Construction and Building Materials
(Editor: Eddie Koenders) -
Sustainable Asphalt Pavements: Materials, Design Methods, and Characterization Techniques
(Editor: Orazio Baglieri) -
Sustainable Building Materials: Novelties, Characteristics and Applications
(Editor: Oliver Plé) -
Sustainable Concretes for Structural Applications
(Editors: Sara Cattaneo, Luigi Coppola) -
Sustainable Construction Materials: From Paste to Concrete
(Editor: Yeonung Jeong) -
Temperature Reduction Technologies Meet Asphalt Pavement: Green and Sustainability
(Editors: Markus Oeser, Michael Wistuba, Pengfei Liu, Di Wang) -
Testing and Modeling of Thermoset Polymers in Construction
(Editors: Roman Wan-Wendner, Jan Vorel, Bilen Emek Abali) -
The Effects of High Temperature on the Mechanical Properties of Concrete
(Editor: Francisco Javier Baeza) -
The Impact of Nanomaterials in Smart Construction Materials
(Editor: Rabah Hamzaoui) -
Thermal Analysis of Cement Composites: Methods, Models, Kinetics, and Recent Advances
(Editor: Lenka Scheinherrová) -
Transport and Mechanical Behavior of Alkali-Activated and Cementitious Materials
(Editor: Kiyofumi Kurumisawa) -
Ultrahigh-Performance Concrete
(Editor: Moncef L. Nehdi) -
Utilisation of Recycled Materials and By-Products in Concrete
(Editors: Marijana Serdar, Guang Ye) -
Various Substitute Aggregate Materials for Sustainable Concrete
(Editors: Se-Jin Choi, Jae-Eun Oh, Se-Yoon Yoon)
Materials Simulation and Design 293 Articles
Prof. Dr. Panagiotis G. Asteris
Topical Collections (1)
-
Advances in Structural Mechanics Modeled with FEM
(Collection Editors: Angelo Marcello Tarantino, Carmelo Majorana, Raimondo Luciano, Michele Bacciocchi)
Current Special Issues (59)
-
Ab Initio Study of Metallic Materials
(Editor: Martin Friák) -
Advanced Computational Technologies for Simulation of the Structure of Solids Ceramics
(Editor: Arman Shojaei) -
Advanced Electrochemical Materials: Experimental and Numerical Analysis
(Editor: Kyung-Koo Lee) -
Advances in Computational Materials Tribology
(Editor: Stefan J. Eder) -
Advances in Developing Functional Coatings on Fibrous Materials
(Editors: Esfandiar Pakdel, Mazeyar Parvinzadeh Gashti) -
Advances in High-Performance Non-Ferrous Materials
(Editors: Hailiang Yu, Zhilin Liu, Xiaohui Cui) -
Analytical and Computational Methods in Material and Mechanical Engineering
(Editors: Tomasz Strek, Hubert Jopek, Paweł Fritzkowski) -
Biomechanics and Damage Mechanics of Composite Materials
(Editors: Michele Perrella, Valentino Paolo Berardi, Enrico Armentani) -
Carbon Fibre Reinforced Plastics
(Editor: Claudia Barile) -
Challenges in Additive Manufacturing: From Coupon Studies to Components
(Editor: Jan Haubrich) -
Computational Materials Modeling, Analysis and Applications
(Editor: Fernando Cortés) -
Computational Mechanics of Structures and Materials
(Editors: Michele Bacciocchi, Angelo Marcello Tarantino, Raimondo Luciano, Carmelo Majorana) -
Computational Methods in Advanced Materials Processing, Metal Casting, and Materials for Energy Applications
(Editors: Adrian S. Sabau, Lang Yuan) -
Computational Modelling and Design of Novel Engineering Materials
(Editors: Tadeusz Burczyński, Wacław Kuś, Łukasz Madej) -
Computer-Aided Design and Modeling of Materials at Different Scales
(Editor: Evgeny V. Shilko) -
Delamination and Fracture Problems in Modern Engineering Materials
(Editor: Sylwester Samborski) -
Development of Numerical Methods for Structural and Mechanical Analysis of Materials and Their Applications
(Editors: Junzhi Cui, Shaoqing Wang, Liqun Cao) -
Dynamic Behavior of Ceramic Composites and Composite Structures
(Editors: Eligiusz Postek, Tomasz Sadowski) -
Dynamics and Application of Modern, Smart and Active Elements or Structures
(Editor: Rafal Rusinek) -
Empowering Materials Processing and Performance from Data and AI
(Editors: Francisco Chinesta, Elías Cueto, Benjamin Klusemann) -
Experimental and Numerical Investigation of Composite Materials
(Editors: Ana Pavlovic, Miroslav Zivkovic, Carlos Pérez Bergmann, Dragan Marinkovic) -
Experimental Characterization and Numerical Modelling of Damping Capacity for Classical and Innovative Materials
(Editors: Antonietta Lo Conte, Andrea Collina) -
Experimental Simulation and Characterization of Radiation Damage in Materials
(Editor: Vladimir Krsjak) -
Fatigue Life Evaluation of Steel under Different Conditions
(Editor: Andrea Gatto) -
Finite Element Analysis of Mechanical Behaviors and Properties of Engineering Materials and Structures
(Editors: Arkadiusz Żak, Jacob Bortman) -
Finite Element Modeling of Solid State Phenomena in Metals and Alloys
(Editor: Marc Bernacki) -
High Performance Nonferrous Alloys: Composition, Microstructure and Properties
(Editor: Tomasz Czujko) -
Innovative Technologies and Materials for Coatings and Surface Treatments
(Editor: Stefano Guarino) -
Materials and Modelling for Extreme Loading Conditions
(Editor: Andrea Manes) -
Mechanical Properties and Characterization of Metallic Materials for Lightweight Structures
(Editor: Alexis Kermanidis) -
Metallic/Polymeric/Composite Materials and Their Friction Stir Welded and Bonded Joints
(Editor: Alessandro Pirondi) -
Micromechanics: Experiment, Modeling and Theory
(Editor: Alexander Hartmaier) -
Microstructure and Mechanical Properties of Polymeric Materials
(Editor: Paulo Nobre Balbis dos Reis) -
Microstructure Characterization, Modelling, and Simulation of Metal Deformation, Damage, and Failure
(Editors: Giuliano Angella, Christophe Pinna) -
Modeling and Experimental Analysis of Metal Forming and Cutting
(Editor: Leon Kukiełka) -
Modeling of Damage in Composite Materials
(Editor: Stéphane Panier) -
Modeling of Textures and Microstructures of Materials
(Editors: Aleksander Muc, Małgorzata Chwał) -
Modeling of the Structure, Properties, Processes and Surface of Materials
(Editor: Sebastian Stach) -
Models for Advanced Granular Materials: Synthesis, Characterization and Application
(Editors: Gaël Combe, Vincent Richefeu) -
Molecular Dynamics Simulations in Nanocomposites
(Editor: Sasan Nouranian) -
New Advances in Magnetic Materials for Power Electronics Applications
(Editors: Thierry A. Meynard, Jaime W. Zapata) -
New Advances in Modeling, Simulation and Analysis of Optical Materials
(Editors: Jorge Francés Monllor, Ibrahim Abdulhalim) -
New Materials and Approaches in Polymer Additive Manufacturing
(Editors: Nicole Zander, Kevin Hart) -
Numerical and Experimental Investigations in Metal Forming
(Editors: Abel Dias dos Santos, José César de Sá) -
Numerical Methods and Optimization of Structures: FEM
(Editor: Jerzy Smardzewski) -
Numerical Simulation and Experimental Studies of Wave Phenomena in Composite Materials
(Editors: Mikhail V. Golub, Artem A. Eremin) -
Phase Field Modeling for Multiphase Problems
(Editor: Luisa Silva) -
Predictive Modelling for Mechanical Behaviour (PMMB) of Materials
(Editor: John Durodola) -
Recent Advances in Cellular Materials
(Editor: Katarina Monkova) -
Research and Modeling of Materials Fatigue and Fracture
(Editor: Józef Jonak) -
Rheology and Deformation of Complex Fluids
(Editor: Rossella Arrigo) -
Synthesis, Properties, Characterization and Application of Polymeric Membranes
(Editor: Amalia Gordano) -
System Dynamics and Fatigue of Materials
(Editor: Filippo Cianetti) -
Technologies for Joining and Forming Thin-Walled Structures in the Construction of Transportation Vehicles
(Editors: Dariusz Fydrych, Andrzej Kubit, Ján Slota, Agnieszka Kowalczyk) -
Theoretical Research in Electronic Structure of Materials
(Editor: Bhaskar Dudem) -
Use of Modern Materials in Technological Processes Accompanied by Frictional Heating
(Editors: Aleksander Yevtushenko, Michal Kuciej) -
Variable Stiffness Composite Materials and Structures
(Editors: Humberto Almeida Jr., Saullo G. P. Castro)
Electronic Materials 201 Articles
Dr. Fabrizio Roccaforte
Current Special Issues (69)
-
2D Materials for Advanced Devices
(Editor: Rafik Addou) -
Advanced Design and Synthesis of Electrode Materials
(Editor: Juan Luis Gómez-Cámer) -
Advanced Design of Ferrofluids
(Editor: Emmanuelle Dubois) -
Advanced Field Effect Transistors: Design, Fabrication and Applications
(Editor: Daniel Tomaszewski) -
Advanced Flexible Materials for Printed Electronics
(Editor: Wim Deferme) -
Advanced Materials for Micro/Nano/Bio-Devices and Their Applications
(Editors: Réda YAHIAOUI, Guillaume HERLEM) -
Advanced Nanomaterials for Electronic and Photonic Applications
(Editors: George Kenanakis, Anna Tasolamprou) -
Advanced Semiconductor Materials and Devices 2021
(Editor: Mamoru Furuta) -
Advanced Sound Absorption Materials and Applications
(Editor: Ruben Picó Vila) -
Advanced/Alternative Transparent Conducting Oxides (Second Volume)
(Editor: Junyeob Yeo) -
Advances in Electromagnetic Properties of Magnetic Materials
(Editor: Catalin Nicolae Marin) -
Advances in Manufacturing and Recycling of Battery Materials
(Editor: Jeong-Soo Sohn) -
Advances in Microreactor Devices for Biomedicine, Nanoparticle Synthesis, Catalysis and Energy Processes
(Editor: Victor Sebastian) -
Advances in Molecular Electronics: Materials and Devices
(Editors: Núria Crivillers, Marta Mas-Torrent) -
Advances in Organic Bioelectronic Materials and Devices
(Editors: Pasquale D'Angelo, Mario Barra) -
Application of Ionic Liquids to Energy
(Editor: Jeeyoung Yoo) -
Applications of Carbon-Based and Hybrid Materials in Sensors
(Editor: Roberto Di Capua) -
Carbon-Based Electronic Materials
(Editor: Sten Vollebregt) -
Conducting Polymers and Fibres
(Editors: Akif Kaynak, Ali Zolfagharian) -
Conducting Polymers, Semiconductor Heterostructures and Two-Dimensional (2D) Materials for Electronics
(Editors: Agnieszka Stolarczyk, Tomasz Jarosz) -
Conducting Polymers: Recent Progress and New Functions
(Editor: Mieczysław Łapkowski) -
Crystal Growth and Characterization of Electronic and Optoelectronic Materials
(Editor: Si-Young Bae) -
Electrical Conductive Polymer Nanocomposites
(Editor: Zdenek Stary) -
Electroceramic Thin Films: Technology, Properties and Applications
(Editors: Dionizy Czekaj, Agata Lisińska-Czekaj) -
Electrochemistry of Organic Compounds and Their Applications
(Editor: Przemysław Ledwoń) -
Electrode Materials: Fabrication, Properties, and Applications
(Editor: Suzy Surblé) -
Electron-Phonon Coupling of Metals
(Editor: Nikita Medvedev) -
Electronic Structure and Modeling of Materials
(Editor: Titus Sandu) -
Electronic Structure, Properties and Application of Novel Materials
(Editor: Giovanni Drera) -
Feature Papers in Electronic Materials Section
(Editor: Fabrizio Roccaforte) -
Functional Materials: From Synthesis to Applications
(Editor: Antonio Juan Dos Santos-García) -
Functionalization of FET-Nano/Micro-Sensors with Emerging Materials
(Editor: Mustafa Yavuz) -
Innovation and Application of Novel Ferroelectric Materials
(Editor: Larisa Andreevna Reznichenko) -
Light (from IR to X-ray) Scattering Research on Magetic Materials
(Editors: In-Sang Yang, Xiang-Bai Chen) -
Magnetic Fluids
(Editor: Dmitry Borin) -
Materials for LTCC Technology
(Editor: Dorota Szwagierczak) -
Materials for Optoelectronic Applications
(Editor: Seunggun Yu) -
Materials Opportunities and Challenges for Quantum Information Processors
(Editor: Na Young Kim) -
Metamaterial and Metasurface Design for Microwave Applications
(Editors: Xavier Begaud, Anne Claire Lepage) -
Nanomaterials for Nanoelectronics and Photonics
(Editor: George Kliros) -
Novel 2D Materials for Nanoelectronic Devices
(Editor: Mirko Poljak) -
Novel Dielectric Materials: Innovations and Applications
(Editor: Junwei Zha) -
Novel Optoelectronic Materials
(Editor: Antonio Terrasi) -
Novel Superconductors and Related Materials
(Editor: Yosuke Goto) -
Novel Wearable E-Textile Technologies
(Editors: Ignacio Gil, Raúl Fernández-García) -
Organic Electronics: Synthesis, Properties, and Applications
(Editor: Dalius Gudeika) -
Organic Light Emitting Transistors: Fundamentals, Materials and Applications
(Editor: Caterina Soldano) -
Organic Materials for Electronic and Optoelectronic Applications
(Editor: Roberto Macaluso) -
Organic Transistors: Current Status and Opportunities
(Editor: Mamatimin Abbas) -
Organic-Semiconductor Based Devices
(Editor: Martin Weis) -
Oxide-based All-solid-state Lithium-ion Batteries
(Editor: Ryoji Inada) -
Physicochemical Properties of Organic and Hybrid Semiconductor Materials
(Editor: Yasuo Nakayama) -
Physics, Electrical and Structural Properties of Dielectric Layers
(Editor: Albena Paskaleva) -
Polar Semiconductors: Effects of Polarity on Crystal Growth and Electronic Devices
(Editor: Ilan Shalish) -
Polymer Optical Fiber Sensors and Devices
(Editor: Piotr Miluski) -
Polymer Optical Fibers: Fabrication, Characterization and Applications
(Editor: Maria Asunción Illarramendi) -
Preparation of Innovative Materials for Different Electronics Applications
(Editor: Felicia Gheorghiu) -
Recent Advances in the Development of Electrode for Solid Oxide Fuel Cells (SOFCs)
(Editor: Tea Ho Shin) -
Recent Advances on Diamond-Based Optical, Electronic, and Optoelectronic Devices
(Editor: Marco Girolami) -
Semiconductor Nanostructures: Growth, Characterization, and Applications
(Editor: Francesco Biccari) -
SiC Based Technology for High Power Electronics
(Editor: Jawad Ul Hassan) -
Surfaces and Interfaces of Optoelectronic Materials
(Editor: Jonas Deuermeier) -
Synthesis and Characterization of Superionic Conductive Glass and Ceramics
(Editor: Toshinori Okura) -
Terahertz Metamaterials and Their Applications
(Editor: Andrei Gorodetsky) -
Trends in Electronic and Optoelectronic Materials
(Editors: Jan Szmidt, Anna Tyszka-Zawadzka) -
Wide-Bandgap Materials and Applications
(Editors: Carlo De Santi, Matteo Meneghini)
General
Topical Collections (3)
-
Additive Manufacturing: Alloy Design and Process Innovations
(Collection Editors: Prashanth Konda Gokuldoss, Zhi Wang) -
Selected Papers from IMETI
(Collection Editors: Wen-Hsiang Hsieh, Yi-Chang Wu) -
Textures and Anisotropy in Advanced Materials
(Collection Editor: Daniel Chateigner)
Current Special Issues (97)
-
Advanced and Emerging Materials-2021
(Editors: Maryam Tabrizian, Filippo Berto) -
Advanced and High Performance Metallic Foams (Volume II)
(Editor: Imre Norbert Orbulov) -
Advanced Characterization of Adhesive Joints and Adhesives
(Editor: Raul D. S. G. Campilho) -
Advanced Insulating Materials and Technologies
(Editor: Jianying Li) -
Advanced Locally Resonant Materials
(Editor: Raffaele Ardito) -
Advanced Materials for Heterojunction
(Editor: Matteo Salvato) -
Advanced Materials for Societal Implementation
(Editors: Hideyuki Kanematsu, Yoshikazu Todaka, Takaya Sato) -
Advanced Nanoparticle Assembly
(Editor: Nikolaos Kalfagiannis) -
Advanced Research on Electrical, Optical, and Magnetic Nanoparticles, Nanowires, and Thin Films
(Editor: Antonio Sánchez-Coronilla) -
Advances in Computational Materials Micro-Mechanics
(Editors: Ivano Benedetti, Fabrice Barbe, Antonio Caggiano) -
Advances in Dental Materials
(Editor: Young-Jun Lim) -
Advances in Electrochemistry of Nanomaterials
(Editor: Anna Ignaszak) -
Advances in Novel Materials for Aerospace Engineering
(Editor: Maria Cinefra) -
Advances in Structure and Properties of Heusler Alloys
(Editor: Pavel V. Lukashev) -
Antimicrobial Materials: Application in Food Processing and Storage
(Editors: Nikos Chorianopoulos, Anthoula A. Argyri) -
Antimicrobial Textile
(Editors: Ivo Grabchev, Desislava Staneva) -
Bioceramics and Related Hybrid Materials for Tissue Reconstruction
(Editor: Toshiki Miyazaki) -
Biofunctionalization of Metallic Biomaterials
(Editors: Javier Gil, Carlos Mas-Moruno, Roman Perez Antoñanzas) -
Biomaterials for Cancer Therapy
(Editors: Saeid Kargozar, Francesco Baino) -
Biomaterials Synthesized via Sol–Gel Methods
(Editor: Michelina Catauro) -
Biomedical Applications of Biodegradable Composites
(Editor: Declan Devine) -
Carbon or Graphene Based Thin Films: Preparation, Properties, and Applications
(Editor: Miroslaw Szybowicz) -
Catalytic Materials for Sustainable Development
(Editor: Magdalena Janus) -
Catalytic Performance of Zeolites and Nanostructured Materials in Bio-Refinery Applications
(Editor: Vladimir Zholobenko) -
Chiral Materials
(Editor: Yuri Gorodetski) -
Chiral Metal Complexes and Their Hybrid Materials
(Editor: Takashiro Akitsu) -
Collagens, Collagen-Based and Collagen-Mimetic Biomaterials: Preparation, Characterization and Applications
(Editor: Andreas Stylianou) -
Collection of Papers in Material Science from Romania
(Editor: Cornel Samoilǎ) -
Collection of Papers in Materials Science from Croatia
(Editors: Tanja Pušić, Mirela Leskovac, Tihana Dekanić) -
Collection of Papers in Materials Science from Estonia
(Editor: Irina Hussainova) -
Collection of Scientific Papers by Polish Scientists in the Field of Materials Research
(Editor: Sebastian Stach) -
Composition, Structure, Properties Relations in Compositionally Complex and High-Entropy Alloys
(Editor: Kirill V. Yusenko) -
Computer-Assisted Manufacturing for Dental Applications
(Editor: Benedikt C. Spies) -
Crystal Growth and Defect Engineering for Metal Halide Perovskite Optoelectronics
(Editors: Jin-Wook Lee, Gill Sang Han) -
Current Developments in Polyurethane Materials for Different Applications
(Editor: Kamila Sałasińska) -
DFT Studies on the Vibrational Properties of Solids
(Editor: Aleksandr Oreshonkov) -
Diamond Films
(Editors: Marcin Gnyba, Mateusz Ficek) -
Dielectric Polymer Materials: Fabrication, Characterization and Application
(Editor: Georgios C. Psarras) -
Dyeing Materials for Sustainable Textile Industry
(Editor: Joonseok Koh) -
Electronic Structure, Carrier Transfer and Transport in Polymers and Biopolymers
(Editor: Constantinos Simserides) -
Fatigue and Fracture Behavior of Composite Materials
(Editors: Davide Palumbo, Rosa De Finis) -
Ferroelectric Materials: From Fundamentals to Applications
(Editors: José Eduardo García, José de los Santos Guerra) -
Fluidization and Flow Properties of Fine Cohesive Powders
(Editor: Paola Ammendola) -
Fracture Toughness and Modelling of Concrete Composites and Other Brittle Materials
(Editor: Grzegorz Ludwik Golewski) -
Friction and Wear of Engineering Materials
(Editors: Daniele Botto, Mario Lavella) -
Functional Glass Ceramic Materials and Their Applications Based on Electrical Properties
(Editor: Maurice Gonon) -
Future Trends in Advanced Materials and Processes
(Editor: Petrica Vizureanu) -
Glassy Materials: From Preparation to Application
(Editor: Giancarlo C. Righini) -
ICKEM2020 - Hierarchically Structured Materials (HSM)
(Editor: Alexander Korsunsky) -
Instrumented Indentation Test: An Aiding Tool for Materials Science and Industry
(Editors: Giovanni Maizza, Dongil Kwon) -
Intermetallics—Current Research and Applications
(Editor: Pawel Jozwik) -
Laser Applications in Polymers
(Editor: Esther Rebollar) -
Laser Processing for Bioengineering
(Editors: Marzena Dominiak, Jacek Matys) -
Low-Impact Polymer Nanofibers and Applications
(Editors: Fabrizio De Cesare, Theodora Krasia-Christoforou) -
Material Systems and Structures in Mechanical and Aerospace Engineering
(Editors: Lae-Hyong Kang, Donghoon Kang) -
Materials and Processes for Sustainable Energy and Environmental Systems
(Editor: Natalia Howaniec) -
Materials for Waste Water Treatment
(Editor: Pierantonio de Luca) -
Mechanical Properties of Intermetallic Alloys
(Editor: Stanislaw Jóźwiak) -
Medium-/High-Entropy and Multi-Principal-Element Materials
(Editor: Martin Friák) -
Multiscale Simulation of Composite Structures: Damage Assessment, Mechanical Analysis and Prediction
(Editor: Stelios K. Georgantzinos) -
Nano Magnetic Materials
(Editor: Jisang Hong) -
Nano-Structured Materials for Solar Cells and Gas Sensors
(Editor: Davor Gracin) -
Nanofluids for Energy and Medicine
(Editor: Hatim Machrafi) -
Nanostructured Anodic Oxides: Fabrication, Characterization and Application
(Editor: Wojciech J. Stepniowski) -
Nanostructured Electrochemical Devices
(Editor: Rosalinda Inguanta) -
New Progresses in the Development, Microstructure and Properties of Ceramic-Metal Composites (Cermets)
(Editor: Ernesto Chicardi) -
New Trends in the Development of Bioactive Glasses
(Editor: Gianluca Malavasi) -
Nitride Ceramics: Synthesis, Properties and Applications
(Editors: Emanuel Ionescu, Samuel Bernard) -
Nuclear Waste Forms: State-of-the-Art and Perspectives
(Editors: Philip Kegler, Stefan Neumeier) -
Oxide/Hydroxide-Based Materials and Their Application
(Editor: Marilena Carbone) -
Piezoelectric Ceramics: From Fundamentals to Applications
(Editors: Lorena Pardo, Sebastiano Garroni, Amador M. González) -
Porous Materials for Energy and Environment
(Editors: Barbara Liguori, Paolo Aprea) -
Production and Characteristics of Ceramic Matrix Composites with a Two-Dimensional Dispersed Phase
(Editor: Paweł Rutkowski) -
Programmable Anisotropic Materials and Composites
(Editor: Jeong Jae Wie) -
Quantifying Crystallographic Texture in Ceramic and Molecular Ferroelectric Materials
(Editor: Chris M. Fancher) -
Recent Advances in Photosynthetic Materials
(Editors: László Nagy, Petar H. Lambrev) -
Recycled Materials and By-Products for Pavement Construction
(Editors: Sara Bressi, João Santos) -
Research Advances in Magnetism and Magnetoelasticity: From Materials to Sensors
(Editor: Roman Szewczyk) -
Selected Papers from ICEUBI2019—International Congress on Engineering—Engineering for Evolution
(Editors: Jorge Miguel dos Reis Silva, Maria do Rosário Alves Calado) -
Selected Papers from TIKI IEEE ICICE 2019 and ICASI 2020
(Editors: Shoou-Jinn Chang, Sheng-Joue Young, Stephen D. Prior, Liang-Wen Ji) -
Silsesquioxanes—Precursors to Functional Materials: Synthesis and Applications—A Themed Issue to Honor Professor Bogdan Marciniec on the Occasion of His 80th Birthday
(Editors: Beata Dudziec, Krzysztof Matyjaszewski) -
Soft Magnetic Materials: Synthesis, Characterization, and Applications
(Editor: Roman Szewczyk) -
Sol-Gel Synthesis of Materials
(Editor: Aivaras Kareiva) -
State-of-the-Art Materials Science and Engineering in Korea 2022
(Editor: Sukhoon Pyo) -
State-of-the-Art Materials Science in Poland (2020,2021)
(Editors: Tomasz Tański, Przemysław Snopiński) -
Stimuli Responsive Liquid Crystals
(Editors: Uroš Tkalec, Dong Ki Yoon) -
Structural Study and Synthesis of Hybrid Multifunctional Nanomaterials
(Editors: Maria Rosaria Plutino, Giuseppe Rosace) -
Superconducting Materials: Properties and Applications
(Editor: Michał J. Winiarski) -
Synthesis, Manipulation, Properties and Applications of Layered Materials
(Editors: Camilli Luca, Maurizio Passacantando, Antonio Bartolomeo) -
Textile-Integrated Electronics
(Editors: Zbyněk Raida, Davor Bonefačić) -
The Effect of Additives on the Fracturing of Alloys
(Editor: Alexander Yu Churyumov) -
The Effect of Graphene on Cancer
(Editor: Mateusz Wierzbicki) -
Thermal Barrier Coatings
(Editor: Fernando Pedraza) -
Titania-Based Hybrid Materials for Photocatalytic and Environmental Applications
(Editors: Katarzyna Siwińska-Ciesielczyk, Agnieszka Kołodziejczak-Radzimska) -
Tribology and Surface Engineering 2021
(Editors: Chin-Chung Wei, Wen-Hsien Kao, Jeng-Haur Horng) -
Women in Science: Materials Science and Engineering
(Editors: Katalin Balazsi, Rosalía Poyato, Inga Zinicovscaia, Anna D. Zervaki)
