Skip to Content

897 Results Found

  • Article
  • Open Access
18 Citations
3,664 Views
13 Pages

Fabrication and Characterization of the Egg-White Protein Chitosan Double-Layer Emulsion

  • Qingmei Pan,
  • Zhipeng Zhang,
  • Ruifang Wu,
  • Danjun Guo and ,
  • Wei Xu,
  • Hongxun Wang and
  • Yang Yi
  • + 2 authors+ 0 author

16 September 2022

Egg-white protein has an abundance of hydrophobic amino acids and could be a potential emulsifier after modification. Here, egg-white protein was modified via ultrasonic and transglutaminase treatments to destroy the globular structure. The egg-white...

(This article belongs to the Special Issue Study on Physicochemical Properties of Food Protein)
  • Article
  • Open Access
18 Citations
4,377 Views
14 Pages

21 March 2023

To investigate the formation mechanism of the white layer on the machined surface during high-speed milling of nickel-based superalloy GH4169, several cutting parameters were selected for milling experiments. Energy dispersive spectroscopy (EDS), X-r...

(This article belongs to the Topic Advanced Manufacturing and Surface Technology)
  • Case Report
  • Open Access
3 Citations
3,870 Views
10 Pages

22 September 2023

Guided bone regeneration surgery always leads to a deformation of the soft tissues consequent to passivation of the flap. In this article, a graftless technique for the restoration of the vestibular depth and for the augmentation of adherent soft tis...

(This article belongs to the Special Issue Guided Bone Regeneration in Oral Surgery)
  • Article
  • Open Access
40 Citations
4,809 Views
18 Pages

Micro and Nanoscale Characterization of Complex Multilayer-Structured White Etching Layer in Rails

  • Jun Wu,
  • Roumen H. Petrov,
  • Sebastian Kölling,
  • Paul Koenraad and ,
  • Loic Malet,
  • Stephane Godet and
  • Jilt Sietsma
  • + 2 authors+ 0 author

23 September 2018

Micro- to nano-scale characterization of the microstructures in the white etching layer (WEL), observed in a Dutch R260 Mn grade rail steel, was performed via various techniques. Retained austenite in the WEL was identified via electron backscatter d...

  • Article
  • Open Access
11 Citations
4,469 Views
9 Pages

High-Performance White Organic Light-Emitting Diodes Using Distributed Bragg Reflector by Atomic Layer Deposition

  • Yonghua Wu,
  • Jiali Yang,
  • Shuanglong Wang,
  • Zhitian Ling and ,
  • Hao Zhang and
  • Bin Wei
  • + 1 author+ 0 author

4 April 2019

White organic light-emitting diodes (WOLEDs) with higher performance, which have enjoyed application in high-quality lighting sources, are here demonstrated with improved optical and electrical properties. The integration of a novel transparent distr...

(This article belongs to the Section Nanotechnology and Applied Nanosciences)
  • Article
  • Open Access
956 Views
10 Pages

As large language models (LLMs) move onto resource-constrained devices, maintaining factual reliability without adding another expensive decoding pass becomes a practical inference problem. Instead of introducing another complex hallucination detecto...

(This article belongs to the Special Issue From Edge AI to On-Device LLMs: Hardware Architectures, Systems, and Applications)
  • Article
  • Open Access
4 Citations
4,451 Views
11 Pages

Management of Exciton for Highly-Efficient Hybrid White Organic Light-Emitting Diodes with a Non-Doped Blue Emissive Layer

  • Wei Luo,
  • Xing Chen,
  • Shuang-Qiao Sun,
  • Yi-Jie Zhang and ,
  • Tong-Tong Wang,
  • Liang-Sheng Liao and
  • Man-Keung Fung
  • + 2 authors+ 0 author

8 November 2019

Hybrid white organic light-emitting diodes (WOLEDs) have drawn great attention both for display and solid-state lighting purposes because of the combined advantages of desirable stability of fluorescent dyes and high efficiency of phosphorescent mate...

(This article belongs to the Special Issue Surfaces, Interfaces, Coatings and Nanostructures of Molecular and Soft Materials)
  • Article
  • Open Access
5 Citations
3,362 Views
18 Pages

Development of Temperature-Controlled Shear Tests to Reproduce White-Etching-Layer Formation in Pearlitic Rail Steel

  • Léo Thiercelin,
  • Sophie Cazottes,
  • Aurélien Saulot,
  • Frédéric Lebon and ,
  • Florian Mercier,
  • Christophe Le Bourlot,
  • Sylvain Dancette and
  • Damien Fabrègue
  • + 3 authors+ 0 author

22 September 2022

The formation of a white etching layer (WEL), a very hard and brittle phase on the rail surface, is associated with a progressive transformation of the pearlitic grain to very fragmented grains due to the cumulative passage of trains. Its formation i...

(This article belongs to the Special Issue Progress in Plastic Deformation of Metals and Alloys (Second Volume))
  • Article
  • Open Access
1 Citations
1,533 Views
15 Pages

Investigation on the Mechanical Properties of White Layers by Cutting and Burnishing Coupling Effect in BTA Deep Hole Drilling

  • Huang Zhang,
  • Pengxiang Yan,
  • Haoran Guo,
  • Ze Chen and ,
  • Zihao Hou and
  • Yaoming Li
  • + 1 author+ 0 author

The unique cutting–burnishing coupling effect in BTA deep hole drilling generates a high-hardness and -brittleness white layer (ultrafine martensitic layer), which will degrade component performance and accelerate tool wear. This work investiga...

  • Article
  • Open Access
16 Citations
4,352 Views
15 Pages

13 April 2022

Titanium dioxide (TiO2) is commonly used in food, cosmetic, and pharmaceutical industries as a white pigment due to its extraordinary light scattering properties and high refractive index. However, as evidenced from recent reports, there are overridi...

(This article belongs to the Special Issue Innovations in the Food System: Exploring the Future of Food)
  • Article
  • Open Access
6 Citations
3,816 Views
15 Pages

Formation Mechanisms and Crack Propagation Behaviors of White Etching Layers and Brown Etching Layers on Raceways of Failure Bearings

  • Xiaochen Zhang,
  • Di Wu,
  • Yaming Zhang,
  • Lijia Xu and ,
  • Jianqiu Wang and
  • En-Hou Han
  • + 1 author+ 0 author

16 February 2024

White etching layers (WELs) and brown etching layers (BELs), formed on the upper layer of bearing raceways generally lead to surface crack initiation and propagation and significantly affect the stable operation of precision bearings. In this study,...

  • Review
  • Open Access
11 Citations
3,747 Views
32 Pages

Progress in Research on White Organic Light-Emitting Diodes Based on Ultrathin Emitting Layers

  • Wencheng Zhao,
  • Xiaolin Hu,
  • Fankang Kong,
  • Jihua Tang and ,
  • Duxv Yan,
  • Jintao Wang,
  • Yuru Liu,
  • Yuanping Sun,
  • Ren Sheng and
  • Ping Chen
  • + 5 authors+ 0 author

White organic light-emitting diodes (WOLEDs) hold vast prospects in the fields of next-generation displays and solid-state lighting. Ultrathin emitting layers (UEMLs) have become a research hotspot because of their unique advantage. On the basis of s...

  • Article
  • Open Access
6 Citations
3,082 Views
13 Pages

Highly Porous Layered Double Hydroxide and Mixed Metal Oxide by Sacrificial Bio-Template, Egg White Foam

  • Vidya Chandrabose,
  • Ji won Park,
  • Sang Yong Jung,
  • Kang Kyun Wang and
  • Jae-Min Oh

20 November 2023

Highly porous layered double hydroxide (LDH) and its calcined mixed metal oxide (MMO) were obtained by utilizing egg white (EW) as a biogenic porous template. The LDH was prepared through coprecipitation under the existence of a beaten EW meringue, a...

(This article belongs to the Section Hybrid and Composite Crystalline Materials)
  • Article
  • Open Access
7 Citations
7,680 Views
18 Pages

3 April 2023

The housing environment has become a critical issue for consumers of eggs and egg products. Therefore, it is imperative to understand how various housing environments can affect the modern laying hen. In this study, alongside the 40th NC layer perfor...

  • Article
  • Open Access
5 Citations
3,369 Views
8 Pages

Preliminary Study of the Targeted Cleaning of an Artificial Gypsum Layer on White Marble

  • Yan Liu,
  • Taoling Dong,
  • Kun Zhang,
  • Fuwei Yang and
  • Liqin Wang

1 January 2021

Targeting cleaning of the artificial gypsum layer on white marble was studied. It was conducted by means of the specific depletion of the calcium and sulfate ions by the barium carbonate scavenger, which led to the continuous dissolution and clearanc...

(This article belongs to the Special Issue Advanced Coatings for Cultural Heritage Preservation)
  • Article
  • Open Access
5 Citations
3,498 Views
14 Pages

Comparative Analysis of the Ultrastructure, Bubble Pores, and Composition of Eggshells of Dwarf Layer-White and Guinea Fowl

  • Yi-Tong Wang,
  • Yi-Fan Chen,
  • Jun-Jie Zhang,
  • Quan Zhang and ,
  • Xiao-Yu Zhao,
  • Rong-Yan Zhou,
  • Hui Chen and
  • De-He Wang
  • + 3 authors+ 0 author

17 May 2024

The decrease in eggshell quality seriously affects production efficiency. Guinea fowl (GF) eggs possess strong eggshells because of their unique crystal structure, and few systematic studies have compared laying hen and GF eggs. Sixty eggs were colle...

(This article belongs to the Section Poultry)
  • Article
  • Open Access
7 Citations
3,149 Views
15 Pages

Fault Diagnosis for Body-in-White Welding Robot Based on Multi-Layer Belief Rule Base

  • Bang-Cheng Zhang,
  • Ji-Dong Wang,
  • Zhong Zheng,
  • Dian-Xin Chen and
  • Xiao-Jing Yin

10 April 2023

Fault diagnosis for body-in-white (BIW) welding robots is important for ensuring the efficient production of the welding assembly line. As a result of the complex mechanism of the body-in-white welding robot, its strong correlation of components, and...

(This article belongs to the Special Issue Fault Diagnosis and Detection of Machinery)
  • Article
  • Open Access
4 Citations
4,053 Views
15 Pages

The interstitial neurons in the white matter of the human and non-human primate cortex share a similar developmental origin with subplate neurons and deep-layer cortical neurons. A subset of interstitial neurons expresses the molecular markers of sub...

(This article belongs to the Section Neuropharmacology and Neuropathology)
  • Article
  • Open Access
2 Citations
2,964 Views
19 Pages

A Comparative Study between Blended Polymers and Copolymers as Emitting Layers for Single-Layer White Organic Light-Emitting Diodes

  • Despoina Tselekidou,
  • Kyparisis Papadopoulos,
  • Vasileios Foris,
  • Vasileios Kyriazopoulos and ,
  • Konstantinos C. Andrikopoulos,
  • Aikaterini K. Andreopoulou,
  • Joannis K. Kallitsis,
  • Argiris Laskarakis,
  • Stergios Logothetidis and
  • Maria Gioti
  • + 5 authors+ 0 author

23 December 2023

Extensive research has been dedicated to the solution-processable white organic light-emitting diodes (WOLEDs), which can potentially influence future solid-state lighting and full-color flat-panel displays. The proposed strategy based on WOLEDs invo...

(This article belongs to the Special Issue Advances in Polymer Blends and Composites)
  • Article
  • Open Access
12 Citations
3,745 Views
22 Pages

Photophysical and Electro-Optical Properties of Copolymers Bearing Blue and Red Chromophores for Single-Layer White OLEDs

  • Despoina Tselekidou,
  • Kyparisis Papadopoulos,
  • Vasileios Kyriazopoulos,
  • Konstantinos C. Andrikopoulos and ,
  • Aikaterini K. Andreopoulou,
  • Joannis K. Kallitsis,
  • Argiris Laskarakis,
  • Stergios Logothetidis and
  • Maria Gioti
  • + 4 authors+ 0 author

6 October 2021

In this study, novel copolymers consisting of blue and red chromophores are presented to induce emission tuning, enabling the definition of white light emission in a single polymeric layer. These aromatic polyether sulfones exhibit high molecular wei...

(This article belongs to the Section Nanophotonics Materials and Devices)
  • Article
  • Open Access
26 Citations
3,474 Views
15 Pages

Grinding Temperature and Surface Integrity of Quenched Automotive Transmission Gear during the Form Grinding Process

  • Xiaoyang Jiang,
  • Ke Liu,
  • Yong Yan,
  • Maojun Li and ,
  • Pan Gong and
  • Hong He
  • + 1 author+ 0 author

2 November 2022

Grinding burn is an undesired defect in gear machining, and a white layer is an indication of severe burn that is detrimental to gear surface performance. In this work, the influence of grinding parameters on the thickness of the white layer during f...

(This article belongs to the Special Issue Physical Metallurgy of Metals and Alloys)
  • Feature Paper
  • Article
  • Open Access
18 Citations
5,260 Views
20 Pages

28 September 2020

Thermo-mechanical loads during hard turning lead to the formation of so-called White Layers on the machined surface. Characterized by a very fine microstructure and high hardness, White Layers have a negative effect on the fatigue life of a component...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
4 Citations
2,478 Views
12 Pages

Study of Residual Stresses and Austenite Gradients in the Surface after Hard Turning as a Function of Flank Wear and Cutting Speed

  • Anna Mičietová,
  • Mária Čilliková,
  • Róbert Čep,
  • Miroslav Neslušan and
  • Nikolaj Ganev

17 February 2023

This paper investigates the influence of cutting speed and flank wear on the depth profile of residual stresses, as well as the fraction of retained austenite after hard turning of quenched bearing steel 100Cr6. Residual stress and retained austenite...

(This article belongs to the Collection Machining and Manufacturing of Alloys and Steels)
  • Article
  • Open Access
3 Citations
2,000 Views
19 Pages

22 September 2023

We tested the novel cross of the old local breed Deutsches Lachshuhn and the layer breed White Rock, as well as purebred Deutsches Lachshuhn, for their suitability as dual-purpose chickens under 100% organic husbandry conditions, and compared their p...

(This article belongs to the Section Poultry)
  • Article
  • Open Access
66 Citations
8,892 Views
16 Pages

7 December 2017

New materials require the use of advanced technology in manufacturing complex shape parts. One of the modern materials widely used in the tool industry for injection molds or hot stamping dies is high conductivity tool steel (HTCS) 150. Due to its ha...

  • Article
  • Open Access
136 Views
18 Pages

Influence of Downstream Process Combinations on Surface Integrity in Wire EDM of Fir-Tree Slots for Turbine Discs

  • Daniel Schulze Brock,
  • Marco Baumeler,
  • Marco Boccadoro,
  • Timm Axt-Petersen and ,
  • Tim Herrig,
  • Andreas Klink and
  • Thomas Bergs
  • + 2 authors+ 0 author

The manufacture of fir-tree slots in nickel-based superalloy turbine discs places stringent demands on surface integrity, as the resulting surface roughness, white layer thickness, and residual stress state directly influence the fatigue life of safe...

  • Article
  • Open Access
1 Citations
2,245 Views
16 Pages

19 October 2023

The purpose of this study was to determine whether the chemical compositions of Alnico alloys had any effects on the electrical discharge machining (EDM) performance and the surface finish. This article compares the behavior of three different Alnico...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
9 Citations
4,027 Views
14 Pages

Possibilities of the Utilization of Ferritic Nitrocarburizing on Case-Hardening Steels

  • Jiri Prochazka,
  • Zdenek Pokorny,
  • Jozef Jasenak,
  • Jozef Majerik and
  • Vlastimil Neumann

2 July 2021

This paper is devoted to the possibilities of the utilization of chosen chemical heat treatment technologies on steels used for manufacturing highly stressed components of military vehicles and weapons systems. The technologies chosen for this resear...

(This article belongs to the Special Issue Manufacturing, Heat Treatment and Forming of Advanced Metallic and Ceramic Materials)
  • Article
  • Open Access
500 Views
24 Pages

Effects of Cutting Insert Flank Wear in Previous Turning and Subsequent Diamond Burnishing on the Surface Integrity, Microstructure and Fatigue Limit of Heat-Treated C45 Steel

  • Jordan Maximov,
  • Galya Duncheva,
  • Angel Anchev,
  • Vladimir Dunchev and ,
  • Kalin Anastasov and
  • Mariana Ichkova
  • + 1 author+ 0 author

11 May 2026

Burnishing technologies are a cheap and effective means of improving the surface integrity (SI) and performance of metal components. However, there is practically no information about the integral influence of the preceding turning process on the ini...

(This article belongs to the Special Issue Recent Advances in High-Performance Steel (2nd Edition))
  • Review
  • Open Access
7 Citations
5,968 Views
20 Pages

A Review of NDT Methods for Wheel Burn Detection on Rails

  • Yanbo Zhang,
  • Xiubo Liu,
  • Longhui Xiong,
  • Zhuo Chen and
  • Jianmei Wei

31 May 2023

Wheel burn can affect the wheel–rail contact state and ride quality. With long-term operation, it can cause rail head spalling or transverse cracking, which will lead to rail breakage. By analyzing the relevant literature on wheel burn, this pa...

(This article belongs to the Section Intelligent Sensors)
  • Article
  • Open Access
10 Citations
5,678 Views
17 Pages

Quantum Dot-Based White Organic Light-Emitting Diodes Excited by a Blue OLED

  • Krishn Das Patel,
  • Fuh-Shyang Juang,
  • Hao-Xuan Wang,
  • Chong-Zhe Jian and
  • Jia-You Chen

22 June 2022

In this study, white organic light-emitting diodes (OLEDs) consisting of red quantum dots (RQD) and green quantum dots (GQD) were investigated. These are the most exciting new lighting technologies that have grown rapidly in recent years. The white O...

(This article belongs to the Section Optics and Lasers)
  • Article
  • Open Access
17 Citations
8,880 Views
17 Pages

18 July 2019

Both genetic background and maternal care can have a strong influence on cognitive and emotional development. To investigate these effects and their possible interaction, White Leghorn (LH) and Brown Nick (BN) chicks, two hybrid lines of layer hen co...

(This article belongs to the Special Issue Domestic Animal Behavior and Well-Being)
  • Article
  • Open Access
3 Citations
4,371 Views
13 Pages

Positron Annihilation Spectroscopy Study of Metallic Materials after High-Speed Cutting

  • Jinquan Li,
  • Roman Laptev,
  • Iurii Bordulev,
  • Krzysztof Siemek and ,
  • Pawel Horodek,
  • Haolun Shen,
  • Anton Lomygin and
  • Jian Cui
  • + 3 authors+ 0 author

28 January 2022

During high-speed cutting, a white layer is often produced on the machined surfaces after mechanical machining, seriously affecting the mechanical properties. These properties are related to the material structure and the defects induced by cutting....

(This article belongs to the Special Issue Advanced Applications and Novel Technologies of Positron Annihilation)
  • Article
  • Open Access
3 Citations
2,627 Views
16 Pages

Exfoliation Resistance, Microstructure, and Oxide Formation Mechanisms of the White Oxide Layer on CP Ti and Ti–Nb–Ta–Zr Alloys

  • Eri Miura-Fujiwara,
  • Soichiro Yamada,
  • Keisuke Mizushima,
  • Masahiko Nishijima and ,
  • Yoshimi Watanabe,
  • Toshihiro Kasuga and
  • Mitsuo Niinomi
  • + 2 authors+ 0 author

2 November 2021

We found that specific biomedical Ti and its alloys, such as CP Ti, Ti–29Nb–13Ta–4.6Zr, and Ti–36Nb–2Ta–3Zr–0.3O, form a bright white oxide layer after a particular oxidation heat treatment. In this paper, the interfacial microstructure of the oxide...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
2 Citations
3,196 Views
11 Pages

Seismic Density Model of the White Sea’s Crust

  • Boris Belashev,
  • Lyubov Bakunovich,
  • Nikolai Sharov and
  • Michail Nilov

7 December 2020

Study of the deep structure of the White Sea region is relevant to active geodynamics, manifestations of kimberlite magmatism, and the prospects of oil and gas searches. The aim of this work was to model the velocity and density structure of the eart...

  • Article
  • Open Access
4 Citations
2,622 Views
19 Pages

A Multiphysics Model for Predicting Microstructure Changes and Microhardness of Machined AerMet100 Steel

  • Wenqian Zhang,
  • Xupeng Chen,
  • Chongwen Yang,
  • Xuelin Wang and ,
  • Yansong Zhang,
  • Yongchun Li,
  • Huan Xue and
  • Zhong Zheng
  • + 3 authors+ 0 author

21 June 2022

The machined-surface integrity plays a critical role in corrosion resistance and fatigue properties of ultra-high-strength steels. This work develops a multiphysics model for predicting the microstructure changes and microhardness of machined AerMet1...

(This article belongs to the Topic Processing, Analysis, Modelling and Mechanics of Materials and Structures)
  • Article
  • Open Access
66 Citations
6,250 Views
17 Pages

Microbial Diversity and Community Variation in the Intestines of Layer Chickens

  • Sha-Sha Xiao,
  • Jian-Dui Mi,
  • Liang Mei,
  • Juanboo Liang and ,
  • Kun-Xian Feng,
  • Yin-Bao Wu,
  • Xin-Di Liao and
  • Yan Wang
  • + 3 authors+ 0 author

16 March 2021

The intestinal microbiota is increasingly recognized as an important component of host health, metabolism and immunity. Early gut colonizers are pivotal in the establishment of microbial community structures affecting the health and growth performanc...

(This article belongs to the Section Poultry)
  • Article
  • Open Access
7 Citations
2,693 Views
13 Pages

Resistance to Wear during Friction without Lubrication of Steel-Cast Iron Pairing with Nanocrystalline Structure-Reinforced Surface Layers

  • Ihor Hurey,
  • Pavlo Maruschak,
  • Andy Augousti,
  • Alan Flowers and ,
  • Volodymyr Gurey,
  • Volodymyr Dzyura and
  • Olegas Prentkovskis
  • + 2 authors+ 0 author

24 September 2023

During the TDT of 41Cr4 steel specimens, a uniformly reinforced white layer with a nano-crystalline structure is formed in the surface layers. The wear resistance of sliding friction without the lubrication of a pair of steel 41Cr4—grey cast ir...

(This article belongs to the Special Issue Frictional Behavior and Wear Performance of Cast Irons)
  • Article
  • Open Access
5 Citations
3,717 Views
9 Pages

Femtosecond Laser-Assisted Formation of Hybrid Nanoparticles from Bi-Layer Gold–Silicon Films for Microscale White-Light Source

  • Sergei Koromyslov,
  • Eduard Ageev,
  • Ekaterina Ponkratova,
  • Artem Larin and ,
  • Ivan Shishkin,
  • Denis Danilov,
  • Ivan Mukhin,
  • Sergey Makarov and
  • Dmitry Zuev
  • + 4 authors+ 0 author

21 May 2022

It is very natural to use silicon as a primary material for microelectronics. However, silicon application in nanophotonics is limited due to the indirect gap of its energy band structure. To improve the silicon emission properties, it can be combine...

(This article belongs to the Special Issue Dynamics and Processes at Laser-Irradiated Surfaces—A Themed Issue in Honor of the 70th Birthday of Professor Jürgen Reif)
  • Article
  • Open Access
8 Citations
1,711 Views
17 Pages

Display of WEDM Quality Indicators of Heat-Resistant Alloy Processing in Acoustic Emission Parameters

  • Sergey N. Grigoriev,
  • Mikhail P. Kozochkin,
  • Vladimir D. Gurin,
  • Alexander P. Malakhinsky and ,
  • Artur N. Porvatov and
  • Yury A. Melnik
  • + 1 author+ 0 author

7 October 2023

The widespread nature of heat-resistant alloys is associated with the difficulties in their mechanical machining. It forces the use of the wire electrical discharge machining to be wider. The productivity, roughness, and dimensions of the modified la...

(This article belongs to the Special Issue Sensing Technology and Applications for Industrial Maintenance and Automation)
  • Article
  • Open Access
6 Citations
2,637 Views
13 Pages

Analysis of Surface State after Turning of High Tempered Bearing Steel

  • Mária Čilliková,
  • Anna Mičietová,
  • Róbert Čep,
  • Martina Jacková and ,
  • Peter Minárik,
  • Miroslav Neslušan and
  • Karel Kouřil
  • + 2 authors+ 0 author

24 February 2022

This paper investigates surface state after turning of the high tempered bearing steel 100Cr6 with a hardness of 40 HRC. White layer (WL) thickness and its microhardness, as well as surface roughness, are investigated as a function of tool flank wear...

(This article belongs to the Collection Machining and Manufacturing of Alloys and Steels)
  • Article
  • Open Access
14 Citations
3,529 Views
22 Pages

Surface and Subsurface Quality of Titanium Grade 23 Machined by Electro Discharge Machining

  • Panagiotis Karmiris-Obratański,
  • Emmanouil L. Papazoglou,
  • Beata Leszczyńska-Madej,
  • Krzysztof Zagórski and
  • Angelos P. Markopoulos

27 December 2021

Electrical Discharge Machining (EDM) is a non-traditional cutting technology that is extensively utilized in contemporary industry, particularly for machining difficult-to-cut materials. EDM may be used to create complicated forms and geometries with...

  • Article
  • Open Access
28 Citations
3,692 Views
15 Pages

Gamma Attenuation Features of White Cement Mortars Reinforced by Micro/Nano Bi2O3 Particles

  • Mona M. Gouda,
  • Ahmed M. El-Khatib,
  • Mahmoud I. Abbas,
  • Shoaa Mofleh Al-Balawi and
  • Mahmoud T. Alabsy

14 February 2023

This study aims to explore the radiation protection properties of white mortars based on white cement as a binder and Bi2O3 micro and nanoparticles in proportions of 15 and 30% by weight as replacement sand. The average particle size of micro- and na...

  • Article
  • Open Access
37 Citations
4,600 Views
13 Pages

Although electrical discharge machining (EDM) is one of the first established non-conventional machining processes, it still finds many applications in the modern industry, due to its capability of machining any electrical conductive material in comp...

(This article belongs to the Special Issue Advances and Trends in Non-conventional, Abrasive and Precision Machining)
  • Article
  • Open Access
5 Citations
2,453 Views
16 Pages

Investigation of the Layer Effects Formed by W-EDM on Electrochemical Grooving of Stellite 21

  • Semih Ekrem Anil,
  • Hasan Demirtas,
  • Adnan Kalayci and
  • Abdulkadir Cebi

10 August 2023

Machining hard-to-cut materials, such as cobalt (Co)-based superalloys, is a common problem in manufacturing industries. Background: wire electrical discharge machining (W-EDM) is one of the widely used cutting processes that causes layer (white laye...

(This article belongs to the Section Material Processing Technology)
  • Article
  • Open Access
17 Citations
4,247 Views
16 Pages

Retinal Alterations as Potential Biomarkers of Structural Brain Changes in Alzheimer’s Disease Spectrum Patients

  • Zheqi Hu,
  • Lianlian Wang,
  • Dandan Zhu,
  • Ruomeng Qin and ,
  • Xiaoning Sheng,
  • Zhihong Ke,
  • Pengfei Shao,
  • Hui Zhao,
  • Yun Xu and
  • Feng Bai
  • + 5 authors+ 0 author

Retinal imaging being a potential biomarker for Alzheimer’s disease is gradually attracting the attention of researchers. However, the association between retinal parameters and AD neuroimaging biomarkers, particularly structural changes, is st...

(This article belongs to the Special Issue New Advances in Alzheimer’s Disease and Other Associated Diseases)
  • Article
  • Open Access
302 Views
18 Pages

3 October 2026

The martensitic white etching layer (WEL) is a primary contributor to rolling contact fatigue of rails, and its in situ quantitative non-destructive evaluation remains a critical challenge in railway maintenance. This study systematically investigate...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
1 Citations
2,513 Views
19 Pages

Fluorescent Aromatic Polyether Sulfones: Processable, Scalable, Efficient, and Stable Polymer Emitters and Their Single-Layer Polymer Light-Emitting Diodes

  • Konstantinos C. Andrikopoulos,
  • Despoina Tselekidou,
  • Charalampos Anastasopoulos,
  • Kyparisis Papadopoulos and ,
  • Vasileios Kyriazopoulos,
  • Stergios Logothetidis,
  • Joannis K. Kallitsis,
  • Maria Gioti and
  • Aikaterini K. Andreopoulou
  • + 4 authors+ 0 author

25 July 2024

In this study, fully aromatic polyether sulfones were developed, bearing blue, yellow, and orange–red π-conjugated semiconducting units. Carbazole-, anthracene-, and benzothiadiazole-based fluorophores are copolymerized with a diphenylsulfon...

(This article belongs to the Section Nanophotonics Materials and Devices)
  • Article
  • Open Access
26 Citations
3,254 Views
19 Pages

An Optimalization Study on the Surface Texture and Machining Parameters of 60CrMoV18-5 Steel by EDM

  • Panagiotis Karmiris-Obratański,
  • Emmanouil L. Papazoglou,
  • Beata Leszczyńska-Madej,
  • Nikolaos E. Karkalos and
  • Angelos P. Markopoulos

16 May 2022

As a non-conventional machining technology, EDM is used extensively in modern industry, particularly in machining difficult-to-cut materials. CALMAX is a chromium-molybdenum-vanadium tool steel with exceptional toughness, ductility, and wear resistan...

  • Article
  • Open Access
26 Citations
7,373 Views
15 Pages

Identification of Copy Number Variation in Domestic Chicken Using Whole-Genome Sequencing Reveals Evidence of Selection in the Genome

  • Donghyeok Seol,
  • Byung June Ko,
  • Bongsang Kim,
  • Han-Ha Chai and ,
  • Dajeong Lim and
  • Heebal Kim
  • + 1 author+ 0 author

15 October 2019

Copy number variation (CNV) has great significance both functionally and evolutionally. Various CNV studies are in progress to find the cause of human disease and to understand the population structure of livestock. Recent advances in next-generation...

(This article belongs to the Collection Applications of Quantitative Genetics in Livestock Production)

of 18