- Article
This study utilizes three-dimensional simulations to investigate scour in combined wave–current flows around rectangular piles with various aspect ratios. The simulation model solves the Reynolds-averaged Navier–Stokes (RANS) equations us...
This study utilizes three-dimensional simulations to investigate scour in combined wave–current flows around rectangular piles with various aspect ratios. The simulation model solves the Reynolds-averaged Navier–Stokes (RANS) equations us...
The present study employs numerical simulations to investigate vertical wall abutment scour with different aspect ratios (B/L, where B is the abutment length in the flow direction, and L is the abutment length transverse to the flow direction) under...
In this study, numerical simulations were conducted in order to understand the role of wave-current interactions in wave deformation. The wave-current interaction mechanisms, wave reflection and energy loss due to currents, the effect of incident con...
Collinear wave-current shear interactions are often assumed to be the same for currents following or opposing the direction of regular wave propagation; with momentum and mass exchanges restricted to the thin oscillating boundary layer (zero-flux con...
Wave–current coupling significantly increases the vulnerability of underwater pile foundations to scour, making effective protection measures essential for waterborne structures. In this study, a group pile of a sea-crossing bridge in Zhejiang...
Numerical modeling of currents and waves is used throughout the marine energy industry for resource assessment. This study compared the output of numerical flow simulations run both as a standalone model and as a two-way coupled wave–current simulati...
In extreme marine environments, the interaction between offshore wind turbine pile foundations (OWTPFs) is critical, and the associated hydrodynamic loads are complex. This study focused on fixed OWTPFs and used computational fluid dynamics (CFD) to...
This Round Robin Test program aims to establish the influence of the combined wave and current effect on the power capture and performance of a generic tidal turbine prototype. Three facilities offering similar range of experimental conditions have b...
This study investigates the flow field around a multi-cage aquaculture platform under wave–current coupling. Using STAR-CCM+ with fifth-order Stokes wave theory and a porous media model, the effects of incident wave height and net solidity rati...
An experimental study of wave and current interaction over ripples is presented in this paper. The campaign was carried out at the shallow water tank at the Danish Hydraulic Institute (DHI, Denmark), in the framework of the TA WINGS (Waves plus curre...
The semi-submersible platform is a widely used structure for supporting floating offshore wind turbines (FOWTs) in deep-sea environments where waves and currents interact. Understanding the impact of wave–current interaction (WCI) on hydrodynam...
This study aims at developing a new set of equations of mean motion in the presence of surface waves, which is practically applicable from deep water to the coastal zone, estuaries, and outflow areas. The generalized Lagrangian mean (GLM) method is e...
A Round Robin Tests program is being undertaken within the EC MaRINET2 initiative. This programme studies the used facility influence can have on the performance evaluation of a horizontal axis tidal turbine prototype when it is operated under wave a...
Wave deformation and sediment transport nearest the shoreside are among the main reasons for sand erosion and beach profile changes. In particular, identifying the areas of incident-wave breaking and longshore current generation parallel to the shore...
To ensure the long-term reliability of tidal stream turbines, waves and currents must be considered during the design phase. In this paper, a three-bladed horizontal axis turbine with a diameter of 0.9 m was used as the baseline model. OpenFOAM, an o...
This paper systematically investigates the hydrodynamic and seabed dynamic responses around twin-pile groups under various wave–current combinations (current velocity
Measuring water motion is essential for oceanography, coastal engineering, and marine environmental monitoring. A wide range of sensing technologies is used to quantify water velocity, wave motion, and flow dynamics, each suited to specific spatial a...
Recent advances in instruments are transforming our capabilities to better understand, monitor, and model river systems. The present paper illustrates such capabilities by providing new insights into unsteady flows captured with a Horizontal Acoustic...
The consecutive submesoscale sea surface processes observed by an unmanned aerial vehicle (UAV) were used to decompose into spatial waves and current features. For the image decomposition, the Fast and Adaptive Multidimensional Empirical Mode Decompo...
Observations from wave basin experiments and wave-resolving numerical simulations demonstrate the effect of wave-current interaction on shear stress around a sandy mound. Observations from the wave basin show that the mound deformation rate and morph...
This paper presents the numerical results of a turbulent vortex in wave–current boundary layers, based on Large Eddy Simulations. Rough wall flow problems have always been a research hotspot in the field of fluid mechanics. The turbulent vortex...
Unsteady wave loading on tidal turbines impacts significantly the design, and expected life-time, of turbine blades and other key components. Model-scale testing of tidal turbines in the wave-current environment can provide vital understanding by emu...
The wave–current interaction in realistic marine environments significantly alters the flow field structure, turbine hydrodynamic loads, and platform motions of floating tidal turbines and represents a critical factor governing their fully coup...
Rip currents are the strong narrow seaward current produced by waves breaking on the coast. Of the many types of rip currents, the present study investigates, experimentally and numerically, the rip current system produced by the wave reflection on a...
We present direct measurements of seafloor ripple dimensions, near-bed mean flow Reynolds stresses and near-bed turbulent sediment fluxes on a sandy inner shelf subjected to strong wave and tidal current forcing. The measurements of ripple dimensions...
Within real-world marine settings, the operational performance of floating tidal stream turbines is impacted by wave–current interaction effects and platform motion responses. Leveraging the improved delayed detached eddy simulation (IDDES) met...
To meet the engineering requirements of long-distance and high-precision elevation transfer under adverse sea conditions, a new structure for a combined survey platform based on the basic principle of vibration reduction and isolation is designed in...
The complex-load environment of offshore monopile foundations makes the combination of waves and current, and the variation in water depth, important factors for local scour. A flume test model of flow–pile–soil coupling for large-diamete...
This paper examines current understanding of the influence of orographic flow dynamics on the turbulent transport of momentum and scalar quantities above complex terrain. It highlights three key low-level orographic flow phenomena governed by gravity...
An experimental study was conducted to identify the behaviour of neutrally buoyant microplastics (specific density, 0.94) in different hydrodynamic conditions while focusing on combined wave–current conditions and the mixing across the hyporhei...
The multi-pile structure is a common and reliable foundation form used in offshore wind turbines (such as jacket-type structures, etc.), which can withstand hydrodynamic loads dominated by waves and water flow, providing a stable operating environmen...
The vortex-induced motion response of semi-submersible platforms can result in fatigue damage to the mooring and riser systems, thereby compromising production safety. Consequently, investigating the characteristics and mechanisms of vortex-induced m...
This study analyzes the hydrodynamic performance of a V-type wave dissipation system and amphibious landing equipment under different combined fields using the Reynolds-averaged Navier–Stokes (RANS) method. A three-dimensional numerical wave ta...
A 2D numerical model for viscous flow is established in OpenFOAM version 10 to analyze the hydrodynamic response of submarine power cables for offshore wind turbines under combined wave–current conditions. It focuses on analyzing the effect of...
In order to ensure the safety and reliability of the submerged tunnel covering layer at the junction of an artificial island and tunnel under extremely bad conditions, the wave current characteristics and the stability of the protective structure in...
A potential flow theory-based fully nonlinear 2D NWT is developed in the time domain to investigate the hydrodynamic performance of a submerged circular cylindrical WEC device under combined wave–current conditions. The hydrodynamic force on th...
A sea-crossing bridge is typically constructed in a marine environment with complex piers, and is susceptible to severe scour at the foundation. This study presents a numerical investigation on flow and scour around a complex pier, specifically focus...
The correct prediction of slowly varying wave drift loads is important for the mooring analysis of floating wind turbines (FWTs). However, present design analysis tools fail to correctly predict these loads in conditions with current and moderate and...
This paper presents the characteristics of the heave motion responses and hydrodynamic forces of a horizontal floating circular cylinder during a wave–current interaction. A two-dimensional numerical model based on the CFD (Computational Fluid...
It is known that the wave breaking process is significantly affected by a current, but little attention has been paid to the effect of wave–current interaction on the breaking wave forces acting on a monopile. This study presented a total of 88...
The modulation instability of surface capillary-gravity water waves is analysed in a shear flow model with a tangential discontinuity of velocity. It is assumed that air blows along the surface of the water with a uniform profile in the vertical dire...
In this study, the potential flow theory is adopted to develop an analytical solution to the diffraction problem of a short-crested wave–current incident on a concentric system consisted of an arc exterior wall and interior cylinder. The influe...
In coastal waters, wave propagation is often affected by rivers and tides. The wave current interaction increases the complexity of the wave propagation. In this study, we consider the Boussinesq type equation with an improved dispersion term as the...
The multiport diffuser effluent discharge facilities constructed beneath the coastal waters were simplified in the laboratory as twin buoyant jets in a wavy cross-flow environment. The near-field flow structure of twin jets was studied by series of e...
Extreme weather events, such as typhoons, induce strong wave–current interactions that significantly alter nearshore hydrodynamic conditions, particularly in shallow intertidal zones. This study investigates the influence of wind speed and wate...
Drag force at the bed acting on water flow is a major control on water circulation and sediment transport. Bed drag has been thoroughly studied in sandy waters, but less so in muddy coastal waters. The variation of bed drag on a muddy shelf is invest...
This study is dedicated to the hydrodynamic climate of Port Phillip Bay (PPB)—a largest coastal lagoon system in Victoria, Australia. Novelty of the present study includes long-term hydrodynamic hindcast simulations integrated with a spectral wave mo...
This contribution is dedicated to demonstrating the high potential and manifold applications of state-of-the-art computational fluid dynamics (CFD) tools for free-surface flows in civil and environmental engineering. All simulations were performed wi...
The design and management of coastal engineering, like harbors and coastal defense structures, requires the simulation of hydrodynamic phenomena. This special issue collects five original papers that address state of the art numerical simulations of...
The modeling of floating tidal stream energy turbine (FTSET) systems demands significant computational resources, especially when incorporating fully coupled models that integrate hydrodynamics, mooring, motion response, and their interactions. In th...
of 11