Skip to Content

59 Results Found

  • Article
  • Open Access
86 Citations
10,692 Views
17 Pages

16 October 2014

Available microwave techniques for crack detection have some challenges, such as design complexity and working at a high frequency. These challenges make the sensing apparatus design complex and relatively very expensive. This paper presents a simple...

(This article belongs to the Section Physical Sensors)
  • Editorial
  • Open Access
12 Citations
4,836 Views
7 Pages

6 March 2025

Roads are a form of critical infrastructure, influencing economic growth, mobility, and public safety. However, the management, monitoring, and maintenance of road networks remain a challenge, particularly given limited budgets and the complexity of...

(This article belongs to the Special Issue Road Detection, Monitoring and Maintenance Using Remotely Sensed Data)
  • Article
  • Open Access
1 Citations
1,277 Views
21 Pages

Subsurface Fracture Mapping in Adhesive Interfaces Using Terahertz Spectroscopy

  • Mahavir Singh,
  • Sushrut Karmarkar,
  • Marco Herbsommer,
  • Seongmin Yoon and
  • Vikas Tomar

18 January 2026

Adhesive fracture in layered structures is governed by subsurface crack evolution that cannot be accessed using surface-based diagnostics. Methods such as digital image correlation and optical spectroscopy measure surface deformation but implicitly a...

(This article belongs to the Special Issue Non-Destructive Testing of Materials and Parts: Techniques, Case Studies and Practical Applications—2nd Edition)
  • Article
  • Open Access
21 Citations
5,013 Views
19 Pages

Early Detection of Subsurface Fatigue Cracks in Rolling Element Bearings by the Knowledge-Based Analysis of Acoustic Emission

  • Einar Løvli Hidle,
  • Rune Harald Hestmo,
  • Ove Sagen Adsen,
  • Hans Lange and
  • Alexei Vinogradov

11 July 2022

Aiming at early detection of subsurface cracks induced by contact fatigue in rotating machinery, the knowledge-based data analysis algorithm is proposed for health condition monitoring through the analysis of acoustic emission (AE) time series. A rob...

(This article belongs to the Special Issue Structural Health Monitoring with Acoustic Emission Sensors)
  • Article
  • Open Access
10 Citations
4,301 Views
10 Pages

Reconfigurable Laser-Stimulated Lock-In Thermography for Surface Micro-Crack Detection

  • Lu Ding,
  • Sergey Gorelik,
  • Pei Wang,
  • Anton Valentinovich Sadovoy and ,
  • Qiang Zhu,
  • Andrew Chun Yong Ngo and
  • Jinghua Teng
  • + 2 authors+ 0 author

19 April 2023

Surface crack detection and sizing is essential for the manufacturing and maintenance of engines, run parts, and other metal elements of aircrafts. Among various non-destructive detection methods, the fully non-contact and non-intrusive technique bas...

(This article belongs to the Special Issue Integrated Photonics for Free Space Communication and Sensing)
  • Article
  • Open Access
19 Citations
9,553 Views
22 Pages

Internal Cracks and Non-Metallic Inclusions as Root Causes of Casting Failure in Sugar Mill Roller Shafts

  • Muhammad Jamil,
  • Aqib Mashood Khan,
  • Hussien Hegab,
  • Shoaib Sarfraz and ,
  • Neeraj Sharma,
  • Mozammel Mia,
  • Munish Kumar Gupta,
  • GuLong Zhao,
  • H. Moustabchir and
  • Catalin I. Pruncu
  • + 5 authors+ 0 author

3 August 2019

The sugar mill roller shaft is one of the critical parts of the sugar industry. It requires careful manufacturing and testing in order to meet the stringent specification when it is used for applications under continuous fatigue and wear environments...

(This article belongs to the Special Issue Advances in Multi-scale Mechanical Characterization of Materials with Optical Methods)
  • Abstract
  • Open Access
901 Views
5 Pages

Thermography-Assisted Mechanical Testing of Cold-Spray (AM) Repair

  • Somsubhro Chaudhuri,
  • Sruthi Krishna Kunji Purayil,
  • Julius Kruse,
  • Mauro Madia and
  • Sören Nielsen

Cold Spray Additive Manufacturing (CSAM) is a solid-state process that is being increasingly used for structural repairs in aerospace and energy sectors. It enables the deposition of dense material at low temperatures by accelerating metal particles...

(This article belongs to the Proceedings of The 18th International Workshop on Advanced Infrared Technology and Applications)
  • Review
  • Open Access
28 Citations
8,107 Views
22 Pages

25 July 2016

Evaluation and non-destructive identification of stress-induced cracks or failures in metals is a vital problem in many sensitive environments, including transportation (steel railway tracks, bridges, car wheels, etc.), power plants (steam generator...

(This article belongs to the Special Issue Non-Destructive Metallic Materials Testing—Recent Research and Future Perspectives)
  • Article
  • Open Access
1 Citations
2,182 Views
12 Pages

An innovative magnetostatic force sensor consisting of a laser source, a tiny cantilever beam, and a small permanent magnet was developed and used for defect inspection in ferromagnetic samples in the present article. The penetrating zone within a fe...

(This article belongs to the Section Applications of Magnetism and Magnetic Materials)
  • Article
  • Open Access
25 Citations
8,426 Views
25 Pages

Aircraft Skin Machine Learning-Based Defect Detection and Size Estimation in Visual Inspections

  • Angelos Plastropoulos,
  • Kostas Bardis,
  • George Yazigi,
  • Nicolas P. Avdelidis and
  • Mark Droznika

Aircraft maintenance is a complex process that requires a highly trained, qualified, and experienced team. The most frequent task in this process is the visual inspection of the airframe structure and engine for surface and sub-surface cracks, impact...

(This article belongs to the Section Assistive Technologies)
  • Article
  • Open Access
53 Citations
7,414 Views
16 Pages

Non-Destructive Inspection of High Temperature Piping Combining Ultrasound and Eddy Current Testing

  • David Santos,
  • Miguel A. Machado,
  • João Monteiro,
  • José P. Sousa and ,
  • Carla S. Proença,
  • Fernando S. Crivellaro,
  • Luís S. Rosado and
  • Telmo G. Santos
  • + 3 authors+ 0 author

22 March 2023

This paper presents an automated Non-Destructive Testing (NDT) system for the in-service inspection of orbital welds on tubular components operating at temperatures as high as 200 °C. The combination of two different NDT methods and respective in...

(This article belongs to the Special Issue Advanced Sensing and Evaluating Technology in Nondestructive Testing)
  • Article
  • Open Access
27 Citations
6,074 Views
18 Pages

4 November 2019

Image sensors are widely used for detecting cracks on concrete surfaces to help proactive and timely management of concrete structures. However, it is a challenging task to reliably detect cracks on damaged surfaces in the real world due to noise and...

(This article belongs to the Section Intelligent Sensors)
  • Article
  • Open Access
24 Citations
12,049 Views
17 Pages

Infrared Thermography for Weld Inspection: Feasibility and Application

  • Sattar Dorafshan,
  • Marc Maguire and
  • William Collins

Traditional ultrasonic testing (UT) techniques have been widely used to detect surface and sub-surface defects of welds. UT inspection is a contact method which burdens the manufacturer by storing hot specimens for inspection when the material is coo...

  • Article
  • Open Access
4 Citations
3,187 Views
10 Pages

18 December 2022

The majority of catastrophic wheelset failures are caused by surface opening fatigue cracks in either the wheel tread or wheel inner. Since failures in railway wheelsets can cause disasters, regular inspections to check for defects in wheels and axle...

(This article belongs to the Special Issue Advanced Sensor Fault Detection and Diagnosis Approaches)
  • Article
  • Open Access
39 Citations
8,662 Views
15 Pages

15 May 2015

This work presents a real life experiment of implementing an artificial intelligence model for detecting sub-millimeter cracks in metallic surfaces on a dataset obtained from a waveguide sensor loaded with metamaterial elements. Crack detection using...

(This article belongs to the Special Issue Metamaterial-Inspired Sensors)
  • Article
  • Open Access
6 Citations
4,394 Views
13 Pages

It is important to detect the surface and/or subsurface cracks in coatings because the cracks usually indicate the failure of the system. Conventional detection techniques face two main challenges. One is the locating of the shallow cracks or defects...

(This article belongs to the Special Issue Advanced Coatings for Resisting Fretting Damage)
  • Article
  • Open Access
11 Citations
3,930 Views
12 Pages

Research on Subsurface Damage Measurement of Fused Silica in Ultra-Precision Grinding Based on Laser Damage Performance

  • Yaoyu Zhong,
  • Mingjin Xu,
  • Wenjun Kuang,
  • Fubin Wan and ,
  • Zhifan Lin,
  • Yansong Fan,
  • Qingqing Hu and
  • Fufang Xu
  • + 3 authors+ 0 author

21 June 2024

In order to achieve accurate prediction of subsurface damage (SSD) in ultra-precision grinding of high-performance ultra-violet laser-irradiated fused silica optics, the paper combines damage precursor multimodal measurement technology with magnetorh...

(This article belongs to the Special Issue Ultra-Precision Machining Technology and Equipments)
  • Article
  • Open Access
667 Views
29 Pages

4 August 2026

The detection of cracks in concrete bridges is essential for evaluating structural durability and load-carrying capacity. Although vision-based crack detection methods have been widely studied, the detection of fine cracks remains challenging. This s...

(This article belongs to the Special Issue Smart and Automated Technologies for Lifecycle Management of Built Assets)
  • Article
  • Open Access
10 Citations
5,506 Views
14 Pages

28 March 2021

Subsurface damage (SSD) produced in a grinding process will affect the performance and operational duration of single-crystal silicon. In order to reduce the subsurface damage depth generated during the grinding process by adjusting the process param...

(This article belongs to the Special Issue Frontiers in Ultra-Precision Machining)
  • Article
  • Open Access
20 Citations
8,231 Views
19 Pages

Image-Based Monitoring of Cracks: Effectiveness Analysis of an Open-Source Machine Learning-Assisted Procedure

  • Luigi Parente,
  • Eugenia Falvo,
  • Cristina Castagnetti,
  • Francesca Grassi and ,
  • Francesco Mancini,
  • Paolo Rossi and
  • Alessandro Capra
  • + 2 authors+ 0 author

23 January 2022

The proper inspection of a cracks pattern over time is a critical diagnosis step to provide a thorough knowledge of the health state of a structure. When monitoring cracks propagating on a planar surface, adopting a single-image-based approach is a m...

(This article belongs to the Section Computer Vision and Pattern Recognition)
  • Article
  • Open Access
6 Citations
3,984 Views
12 Pages

8 June 2021

The broad-frequency response and nanometer-range displacements of ultrasound detection are essential for the characterization of small cracks, structural health monitoring and non-destructive evaluation. Those perturbations are generated at sub-nano-...

(This article belongs to the Section Electronic Sensors)
  • Article
  • Open Access
22 Citations
8,502 Views
14 Pages

18 July 2014

This paper proposes a novel Lamb wave line sensing technique for crack detection in a welded stiffener. The proposed technique overcomes one of the biggest technical challenges of Lamb wave crack detection for real structure applications: crack-indu...

(This article belongs to the Special Issue Ultrasonic Sensors and Transducers for Applications in Biology, Medicine and NDT)
  • Article
  • Open Access
529 Views
27 Pages

Integrating Digital Holography and Molecular Dynamics for Non-Destructive 3D Characterization and Deterioration Mechanism Analysis of Subsurface Microcracks in Mural Paintings

  • Huiling Zhang,
  • Wenjing Zhou,
  • Sihan Chen,
  • Guanghua Li and ,
  • Liang Qu,
  • Yao Chen,
  • Yingjie Yu and
  • Vivi Tornari
  • + 3 authors+ 0 author

The detection and degradation analysis of subsurface microcracks in mural paintings remain challenging due to their inhomogeneous multilayered structure and complex deterioration mechanisms. In this study, we propose a multimodal stepwise method for...

(This article belongs to the Special Issue Multi-Modal Methods for the Inspection of Artworks and Cultural Heritage)
  • Article
  • Open Access
1,973 Views
29 Pages

Analysis of Subsurface Damage Based on K9 Glass Grinding

  • Yao Liu,
  • Jingjing Xie,
  • Ruiliang Li,
  • Jiankun Gao and ,
  • Ming Li and
  • Lin Sun
  • + 1 author+ 0 author

30 September 2025

During the grinding process of K9 glass, various forms of surface damage—such as indentations and pitting—as well as subsurface damage—including cracks and residual stress—are generated. This paper focuses on the planetary gri...

(This article belongs to the Section Advanced and Functional Ceramics and Glasses)
  • Article
  • Open Access
4 Citations
2,131 Views
20 Pages

Real-Time Detection and Quantification of Rail Surface Cracks Using Surface Acoustic Waves and Piezoelectric Patch Transducers

  • Mohsen Rezaei,
  • Sven Eck,
  • Sebastian Fichtenbauer,
  • Jürgen Maierhofer and ,
  • Reinhard Klambauer,
  • Alexander Bergmann,
  • David Künstner,
  • Dino Velic and
  • Hans-Peter Gänser
  • + 4 authors+ 0 author

10 May 2025

This paper presents a novel wayside rail monitoring system for real-time detection and quantification of rail surface cracks with sub-millimeter precision. The core innovation lies in mounting piezoelectric transducers on the web of the rail—an...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
72 Citations
13,533 Views
17 Pages

21 July 2022

In this study, different eddy-current based probe designs (absolute and commercial reflection) are used to detect artificial defects with different sizes and at different depths in parts composed of stainless-steel (316) and titanium (TI-64) made by...

(This article belongs to the Special Issue Integrated Circuits and Technologies for Real-Time Sensing)
  • Article
  • Open Access
9 Citations
3,636 Views
20 Pages

24 November 2024

Maintaining the integrity of urban road pavements is vital for public safety, transportation efficiency, and economic stability. However, aging infrastructure and limited budgets make it challenging to detect subsurface defects that can lead to pavem...

(This article belongs to the Special Issue Advances in Monitoring and Detection of Geohazards in Urban Areas Using Remote Sensing)
  • Article
  • Open Access
10 Citations
6,715 Views
19 Pages

19 August 2024

Pore and crack formation in parts produced by additive manufacturing (AM) processes, such as laser powder bed fusion, is one of the issues associated with AM technology. Surface and subsurface cracks and pores are induced during the printing process,...

(This article belongs to the Special Issue Editorial Board Members' Collection Series: Electronic Sensors, Devices and Systems)
  • Article
  • Open Access
34 Citations
6,376 Views
20 Pages

MV-GPRNet: Multi-View Subsurface Defect Detection Network for Airport Runway Inspection Based on GPR

  • Nansha Li,
  • Renbiao Wu,
  • Haifeng Li,
  • Huaichao Wang and ,
  • Zhongcheng Gui and
  • Dezhen Song
  • + 1 author+ 0 author

7 September 2022

The detection and restoration of subsurface defects are essential for ensuring the structural reliability of airport runways. Subsurface inspections can be performed with the aid of a robot equipped with a Ground Penetrating Radar (GPR). However, int...

(This article belongs to the Special Issue Radar and Sonar Imaging and Processing Ⅲ)
  • Article
  • Open Access
3 Citations
6,378 Views
12 Pages

25 January 2016

Additive manufactured components have a different metallurgic structure and are more prone to fatigue cracks than conventionally produced metals. In earlier papers, an effective Structural Health Monitoring solution was presented to detect fatigue cr...

(This article belongs to the Special Issue Acoustic and Elastic Waves: Recent Trends in Science and Engineering)
  • Article
  • Open Access
11 Citations
4,944 Views
22 Pages

Rail Sample Laboratory Evaluation of Eddy Current Rail Inspection Sustainable System

  • Jiaqing Wang,
  • Qingli Dai,
  • Pasi Lautala,
  • Hui Yao and
  • Ruizhe Si

15 September 2022

Increasing the efficiency, frequency, and speed of rail defect detection can reduce maintenance costs and improve the sustainability of railways. The non-contact eddy current (EC) system can be operated along with a railcar for detecting rail flaws....

(This article belongs to the Topic Advanced Technology and Development in the Pavement Materials)
  • Article
  • Open Access
342 Views
35 Pages

31 August 2026

Structural cracks that develop within semi-rigid asphalt pavement structures may remain concealed beneath the pavement surface, making their opening widths, depths, and morphologies difficult to determine nondestructively. Although ground-penetrating...

(This article belongs to the Topic Nondestructive Testing and Evaluation-2nd Edition)
  • Article
  • Open Access
2 Citations
518 Views
23 Pages

Landslide Deformation Remote Monitoring in Alpine Mountains Using UAV Photogrammetry and Infrared Thermography: A Case Study in Wumeng Mountain Region, China

  • Cong Zhao,
  • Meng Wang,
  • Yueping Yin,
  • Yongbo Tie and ,
  • Sainan Zhu,
  • Jingtao Liang,
  • Su Zhang,
  • Jianguo Feng,
  • Ban Song and
  • Xueqing Li
  • + 5 authors+ 0 author

12 June 2026

Land surface temperature (LST) is crucial for understanding winter landslide evolution. This study combines Unmanned Aerial Vehicle (UAV) photogrammetry and infrared thermography (IRT) to monitor winter landslides in China’s Wumeng Mountain reg...

(This article belongs to the Special Issue Advances in GIS and Remote Sensing Applications in Natural Hazards)
  • Article
  • Open Access
32 Citations
5,841 Views
14 Pages

Non-Destructive Subsurface Inspection of Marine and Protective Coatings Using Near- and Mid-Infrared Optical Coherence Tomography

  • Christian R. Petersen,
  • Narayanan Rajagopalan,
  • Christos Markos,
  • Niels M. Israelsen and ,
  • Peter J. Rodrigo,
  • Getinet Woyessa,
  • Peter Tidemand-Lichtenberg,
  • Christian Pedersen,
  • Claus E. Weinell and
  • Ole Bang
  • + 6 authors+ 1 author

22 July 2021

Near- and mid-infrared optical coherence tomography (OCT) is evaluated as a non-destructive and non-contact reflection imaging modality for inspection of industrial and marine coatings. Near-infrared OCT was used to obtain high-resolution images (~6/...

  • Article
  • Open Access
18 Citations
5,970 Views
26 Pages

Texture Analysis to Enhance Drone-Based Multi-Modal Inspection of Structures

  • Parham Nooralishahi,
  • Gabriel Ramos,
  • Sandra Pozzer,
  • Clemente Ibarra-Castanedo and ,
  • Fernando Lopez and
  • Xavier P. V. Maldague
  • + 1 author+ 0 author

11 December 2022

The drone-based multi-modal inspection of industrial structures is a relatively new field of research gaining interest among companies. Multi-modal inspection can significantly enhance data analysis and provide a more accurate assessment of the compo...

  • Article
  • Open Access
10 Citations
4,456 Views
16 Pages

Hydrogen, due to corrosion processes, can degrade high strength steels (HSS) through embrittlement and stress corrosion cracking mechanisms. Scanning Kelvin probe (SKP) mapping of surface potential was applied, to visualize the locations with an incr...

(This article belongs to the Special Issue Mechanism and Predictive/Deterministic Aspects of Corrosion)
  • Article
  • Open Access
4 Citations
2,719 Views
10 Pages

Sub-ps Pulsed Laser Deposition of Boron Films for Neutron Detector Applications

  • Maria Luisa De Giorgi,
  • Muhammad Rizwan Aziz,
  • Alexandra Manousaki,
  • Alessio Perrone and
  • Argyro Klini

11 February 2023

In view of the demand for high-quality thermal neutron detectors, boron films have recently attracted widespread research interest because of their special properties. In this work, we report on the deposition of boron films on silicon substrates by...

(This article belongs to the Special Issue Materials Light Life)
  • Article
  • Open Access
42 Citations
7,225 Views
13 Pages

25 December 2017

Single-crystal sapphire (α-Al2O3) is a hard and brittle material. Due to its highly crystalline nature, the fracture behavior of sapphire is strongly related to its crystal structure, and understanding the effects of crystal structure on the crack pr...

  • Article
  • Open Access
23 Citations
4,530 Views
11 Pages

Hydrogen in combination with mechanical stress can lead to rapid degradation of high-strength steels through environmentally assisted cracking mechanisms. The scanning Kelvin probe (SKP) was applied to automotive martensitic steel grade MS1500 in ord...

  • Article
  • Open Access
1 Citations
680 Views
16 Pages

Discrepancy Between Surface Wear and Subsurface Fatigue Damage in CAD/CAM Composite Crowns: A Comparative Study of Intraoral Scans and Optical Coherence Tomography

  • Julie-Jacqueline Kuhl,
  • Maximiliane Amelie Schlenz,
  • Bernd Wöstmann,
  • Christin Grill and ,
  • Ralf Brinkmann and
  • Christoph Moos
  • + 1 author+ 0 author

3 February 2026

Objectives: This study aimed to determine whether surface wear, identified through the superimposition of intraoral scans (IOS), can predict subsurface damage progression detected by optical coherence tomography (OCT) during fatigue testing of comput...

(This article belongs to the Special Issue Optical Coherence Tomography (OCT) in Dentistry)
  • Article
  • Open Access
4 Citations
3,243 Views
15 Pages

Examination of the Effect of Cooling Rate after Extrusion to Formability of 6061 Automotive Profiles

  • Athanasios Vazdirvanidis,
  • Sofia Papadopoulou,
  • Grigoris Symeonidis,
  • Fivos Aslanis and ,
  • Andreas Rikos and
  • Eva Stachouli
  • + 1 author+ 0 author

15 March 2023

As part of the present project, an inquiry is being conducted into the impact of the cooling rate subsequent to extrusion on both the mechanical characteristics and microstructure of 6061 alloy extruded profiles tailored for application in the automo...

(This article belongs to the Special Issue Alloys: Evolution of Microstructure and Texture)
  • Article
  • Open Access
512 Views
17 Pages

Planar Microwave Sensor for Detection of Localized Discontinuities in Polylactic Acid (PLA) Materials

  • Kim Ho Yeap,
  • Yan Jun Wong,
  • Kok Weng Tan,
  • Nor Faiza Abd Rahman and ,
  • Nuraidayani Effendy,
  • Pek Lan Toh,
  • Han Kee Lee,
  • Siu Hong Loh,
  • Ming Hui Tan and
  • Foo Wei Lee
  • + 5 authors+ 0 author

1 July 2026

Material discontinuities and defects can profoundly impact the structural integrity and overall product quality. In a multitude of industries, ranging from aerospace and automotive to the nuclear sector and manufacturing, even surface discontinuities...

(This article belongs to the Section Materials Processes)
  • Article
  • Open Access
9 Citations
3,019 Views
17 Pages

26 August 2023

Structures in their service life are often damaged as a result of aging or extreme events such as earthquakes or storms. It is essential to detect damage in a timely fashion to ensure the safe operation of the structure. If left unchecked, subsurface...

(This article belongs to the Section Sensors and Robotics)
  • Article
  • Open Access
1 Citations
3,167 Views
15 Pages

5 October 2022

There are strict requirements on the surface-shape accuracy, cracks, scratches, and subsurface damage of photomask glass substrates with the advancement of photo-etching technology. In this study, photomask quartz glass substrates were etched with th...

  • Article
  • Open Access
3 Citations
1,526 Views
22 Pages

Enhanced Near-Surface Flaw Detection in Additively Manufactured Metal Ti-5Al-5V-5Mo-3Cr Using the Total Focusing Method

  • Kate van Herpt,
  • Mohammad E. Bajgholi,
  • P. Ross Underhill,
  • Catalin Mandache and
  • Thomas W. Krause

17 October 2025

Additive manufacturing (AM) enables the fabrication of complex components with high geometric freedom, but it can introduce near-surface flaws due to rapid solidification, resulting in porosity and lack of fusion. In addition, localized melting and s...

(This article belongs to the Special Issue Feature Papers in Physical Sensors 2025)
  • Article
  • Open Access
16 Citations
5,158 Views
22 Pages

Hybrid Fiber Optic Cable for Strain Profiling and Crack Growth Measurement in Rock, Cement, and Brittle Installation Media

  • Samuel Nowak,
  • Taghi Sherizadeh,
  • Mina Esmaeelpour,
  • Dogukan Guner and
  • Kutay E. Karadeniz

10 December 2022

Brillouin scattering-based distributed fiber optic sensing (DFOS) technologies such as Brillouin optical time domain reflectometry (BOTDR) and Brillouin optical time domain analysis (BOTDA) have broad applicability for the long term and real-time mon...

(This article belongs to the Special Issue Distributed Optical Fiber Sensors for Concrete Structure Monitoring)
  • Article
  • Open Access
7 Citations
2,558 Views
25 Pages

Performance of Sensors Embedded in UAVs for the Analysis and Identification of Pathologies in Building Façades

  • João Victor Ferreira Guedes,
  • Gabriel de Sousa Meira,
  • Edilson de Souza Bias,
  • Bruno Pitanga and
  • Vlade Lisboa

The use of UAVs equipped with sensors has gained prominence due to their efficiency, safety, and ability to provide detailed data for hard-to-reach inspections, allowing for more precise and integrated analyses. Despite their great potential, these t...

(This article belongs to the Section Construction Management, and Computers & Digitization)
  • Article
  • Open Access
1,385 Views
18 Pages

AI-Aided GPR Data Multipath Summation Using x-t Stacking Weights

  • Nikos Economou,
  • Sobhi Nasir,
  • Said Al-Abri,
  • Bader Al-Shaqsi and
  • Hamdan Hamdan

2 October 2025

The Ground Penetrating Radar (GPR) method can image dielectric discontinuities in subsurface structures, which cause the reflection of electromagnetic (EM) waves. These discontinuities are imaged as reflectors in GPR sections, often distorted by diff...

  • Feature Paper
  • Article
  • Open Access
3 Citations
1,418 Views
39 Pages

9 January 2026

This study examines the high-temperature degradation of Hastelloy C276, a corrosion-resistant nickel-based alloy, during exposure to combustion products generated by methane and 99% cracked ammonia. Using a high-pressure optical combustor (HPOC) at 4...

(This article belongs to the Section Energy Systems)
  • Article
  • Open Access
92 Views
26 Pages

11 November 2026

Airport runways are critical transportation infrastructures whose structural integrity is continuously threatened by subsurface defects induced by cyclic aircraft loading and environmental erosion. Ground-penetrating radar (GPR) B-scan imaging is wid...

(This article belongs to the Special Issue Generative Adversarial Networks: Architectures and Applications)

of 2