Deep rock engineering is in a high pre-stressed state before excavation. In this research, a method to calculate the release of strain energy caused by excavation in pre-stressed rock is proposed. The normal stress release after excavation leads to a...
In the field of crack mechanics, predicting the direction of a crack is important because this will evaluate whether, when the crack propagates, it penetrates into important areas and whether the structure is dangerous or not. This paper will refer t...
Because both faults and cleats exist in coal, sharp stress drops occur during loading when coal is deformed. These drops occur during the pre-peak stage and are accompanied by sudden energy releases. After a stress drop, the stress climbs slowly foll...
The response of polymeric beams made of Acrylonitrile butadiene styrene (ABS) and thermoplastic polyurethane (TPU) in the form of 3D printed beams is investigated to test their elastic and plastic responses under different bending loads. Two types of...
As an earthquake is capable of causing significant losses, a strain buildup and release model following an earthquake is of importance for mitigation purposes. In this study, we aim to model strain buildup and release on a strike-slip fault which con...
For a typical pipeline-lifting deep-sea mining system, marine mining pipelines have higher requirements for steel welding. After the pipeline steel is welded, a large amount of residual stress will be generated inside the component because the heat t...
A new structure termed “concrete-filled FRP-grooved steel composite tube (CFGCT) column” is proposed, which is composed of a stress-released steel tube (i.e., grooved steel tube), fiber-reinforced polymer (FRP) and concrete. Axial load tests were car...
This study investigated the mechanism of delamination damage in the double cantilever beam (DCB) standard test by the use of the strain energy release rate. The curve of the strain energy release rate was verified by the Rise Angle (RA) method. For t...
This paper presents an experimental study on the dynamic strength of concrete by using a split Hopkinson pressure bar. The stress–strain relationship and fragmentation degree of concrete were analyzed. The change process of the incident energy,...
Anabaena sp. strain PCC 7120 is a filamentous cyanobacterium that can use inorganic compounds such as nitrate or ammonium as nitrogen sources. In the absence of combined nitrogen, it can fix N2 in differentiated cells called heterocysts. Anabaena als...
The formation and evolution of (normal) fault affect the formation and preservation of some reservoirs, such as fault-block reservoirs and faulted reservoirs. Strain energy is one of the parameters describing the strength of tectonic activity. Thus,...
This study aims to determine the earthquake hazard of the Simav Fault Zone (SFZ), one of the key tectonic features of Western Anatolia—a region that serves as a natural laboratory for geoscientists due to its complex tectonic structure and swar...
Silica-based and borate-based glass series, with increasing amounts of TiO2 incorporated, are characterized in terms of their mechanical properties relevant to their use as metallic coating materials. It is observed that borate-based glasses exhibit...
The 10-s grip and release is a method to evaluate hand dexterity. Current evaluations only visually determine the presence or absence of a disability, but experienced physicians may also make other diagnoses. In this study, we investigated a method f...
The evolution of micro-cracks in rocks under different strain rates is of great importance for a better understanding of the mechanical properties of rocks under complex stress states. In the present study, a series of tests were carried out under va...
Multi-walled carbon nanotube (MWCNT) reinforced epoxy films were deposited on an aluminum substrate by a hot-pressing process. Three-point bending tests were performed to determine the Young’s modulus of MWCNT reinforced nanocomposite films. Compared...
This paper studied the fracability of tight sandstone reservoirs by means of incorporating geomechanics properties and surrounding in situ stresses into a new model. The new fracability evaluation model consists of variables such as brittleness index...
Single shear or single lap joints are the most prevalent type of adhesive joints used in advanced engineering applications, where they are exposed to fatigue loadings in their services. Although their mechanical performances under static loading have...
P(3HB) is a biodegradable and biocompatible polymer, which can replace petroleum-derived plastics. Previous studies have shown that Azotobacter vinelandii strain OP-PhbP3+, which overexpresses the phasin protein PhbP3, produces high concentrations of...
The objective of this study was to investigate the elastic and plastic responses of 3D-printed thermoplastic elastomer (TPE) beams under various bending loads. The study also aimed to develop a self-healing mechanism using origami TPE capsules embedd...
Donor–acceptor (D–A) cyclopropanes are important precursors in the synthesis of complex molecules due to their bidentate character and high reactivity. Among them, cyclopropane-1,1-dicarbonitriles are less commonly reported in modern lite...
In engineering practice, layered rock masses often display obvious anisotropy while deforming and failing, and the failure mode directly impacts the engineering construction stability. In this study, the fracture failure load, fracture toughness, cra...
In this investigation, various loadings of multi-walled carbon nanotubes (MWCNTs) ranging from 0.3–1.0 wt % were incorporated into the epoxy to fabricate the nanocomposites. Nanocomposite film with a thickness of 0.2 mm was deposited on an alum...
The paper presents experimental tests of unidirectional double cantilever beams made of a glass fiber reinforced (GFRP) laminate. The critical value of the strain energy release rate (c-SERR or GIC), i.e., the mode I fracture toughness of the conside...
Laminated composites with thermoset matrices are already well established in major engineering fields like automotive and aviation. The primary drawbacks of such thermoset-based composites are the high cycle times required during manufacturing and th...
Recent syntheses of azetidines, pyrrolidines, piperidines and azepines through cycloaddition or sigmatropic rearrangements of vinylaziridines are described. Applications to natural product synthesis and mechanistic investigations are also summarized.
Polytetrafluoroethylene (PTFE)/Al reactive material with different aluminum particle sizes were prepared by molding and sintering, and the effect of aluminum particle size on the impact behavior of PTFE/Al reactive material with a mass ratio of 50:50...
Earthquakes are the most energetic phenomena in the lithosphere: their study and comprehension are greatly worth doing because of the obvious importance for society. Geosystemics intends to study the Earth system as a whole, looking at the possible c...
The wedge-loaded asymmetric double cantilever beam (WADCB) test is an experimental method to determine the mixed-mode I/II fracture toughness of composite materials by inserting a wedge into the specimen along a potential delamination path. Whilst th...
The antibiotic resistance of Salmonella has become increasingly serious due to the increased use of antibiotics, and antimicrobial peptides have been considered as an ideal antibiotic alternative. Salmonella can induce macrophage apoptosis and thus f...
Background: Classical swine fever virus (CSFV) is a highly contagious and fatal disease in pigs and wild boars. While hunting and bait vaccination are effective for CSFV eradication, additional strategies are needed to control wild boar populations....
Chitinolytic activity is a well-documented phenotype controlled by quorum sensing (QS) in Chromobacterium strains but also regulated by carbon catabolite repression mechanisms. This work comprehensively reviews scientific literature on chitinolytic a...
17 February 2022
The organophosphate-mineralizing bacteria (OPB) convert environmental organic phosphorus (P) into soluble P that can be directly absorbed and utilized by organisms. OPB is an important group of microorganisms in lake sediments. The P decomposed and r...
Releasing Wolbachia-infected mosquitoes to suppress or replace wild vector mosquitoes has been carried out in 24 countries worldwide, showing great promise in controlling mosquitoes and mosquito-borne diseases. To face the instability of Wolbachia in...
17 June 2019
Inorganic phosphate-solubilizing bacteria (IPB) are an important component of microbial populations in lake sediments. The phosphate that they decompose and release becomes an important source of phosphorus for eutrophic algae. The IPB strains were s...
Global markets do not tolerate the presence of fruit fly (Tephritidae) in horticultural produce. A key method of control for tephritidae pests, is the sterile insect technique (SIT). Several countries release a bisex strain, i.e., males and females,...
In this paper, we study the magnitude of the effective prestressing force of steel strands in prestressed reinforced concrete structures. Through the theory of micro-hole release, the functional relationship equation between tensile stress and strain...
Feruloyl esterase (FAE)-producing micro-organisms to obtain ferulic acid (FA) from natural substrates have good industrial prospects, and the synergistic effect of multiple bacteria can better improve the yield of FA. In this study, on the premise of...
The complosome controls different activities in innate immune cells and epithelial cells; however, its role in the response of VECs to Candida remains untested. In this in vitro study, we compared two clinical vaginal strains of C. albicans, namely,...
Human living environments and health are seriously affected by the odor produced from fermentation of livestock and poultry manure. In order to reduce the odor pollution caused by livestock and poultry manure, efficient strains were screened and two...
Rockburst is a kind of dynamic rock failure process that is easily induced by the excavation of a high-stress rock mass. However, from an energy perspective, the existing indexes for rockburst tendency have a limitation in that they do not consider t...
The three aftershock sequences that occurred in Al Hoceima, Morocco, in May 1994 (Mw 6.0), February 2004 (Mw 6.4) and January 2016 (Mw 6.3) were stochastically modeled to investigate their temporal and energetic behavior. A form of the restricted tri...
In the course of our research, aimed at improving sugar beets phosphorus nutrition, we isolated and characterized Streptomyces sp. strains, endemic from sugar beet fields of the Beni-Mellal region, which are able to use natural rock phosphate (RP) an...
The development of efficient antibiotic-releasing materials derived from sustainable and recyclable compounds represents a key area within biomedical materials science, particularly in the treatment of antibacterial infections. Herein, a Fe3+/terepht...
The antifungal agent, ketoconazole, and the anti-inflammatory drug, piroxicam, were incorporated into matrices of xanthan or oleic acid-esterified xanthan (Xn) and polyurethane (PU), to develop topical drug delivery systems. Compared to matrices with...
Chewing gums may be particularly effective means for delivering and maintaining bioactive molecules, included in the gum formulation, able to have an anti-cariogenic effect. The purposes of this study were: to develop novel chewing gums containing qu...
The transformation of phosphorus (P) is a major factor of lake eutrophication, and phosphate releasing bacteria play an important role in the release process. Experiments were conducted to investigate P content and characterize phosphate solubilizing...
Our study investigated the effectiveness of 446 strains of lactic acid bacteria (LAB) belonging to different species and isolated from diverse sources (food, human, and animal) as potential probiotic candidates, with the perspective of producing diet...
Area-wide integrated pest management (AW-IPM) programmes with a sterile insect technique component (SIT) are used to control populations of insect pests worldwide, including the Mediterranean fruit fly, Ceratitis capitata. SIT consists of the mass re...
Five yeast strains (four wild Saccharomyces cerevisiae strains and a collection strain-S. cerevisiae var. boulardii) were encapsulated in alginate beads. Encapsulation yield was at least 60% (100% for some strains) and yeasts survived in beads for 30...
of 39