In modern marine vessels equipped with electric propulsion systems, rectifiers are commonly used as part of the setup. However, the conventional deadbeat predictive direct power control strategy for three-phase voltage source pulse-width modulation (...
The reliable operation of grid-connected distributed generation converters is challenged by severe unbalanced conditions and stringent fault ride-through requirements. To address these issues, this paper presents a sensorless flexible predictive dire...
A novel strategy of three-vector-based model predictive direct power control (MPDPC) is proposed for three-phase Pulse-width Modulation (PWM) rectifier. Under ideal grid conditions, three-vector MPDPC is studied, and a good control effect has been ac...
In recent years, the pulse-width-modulation (PWM) converter has been found to have extensive applications in renewable energy, industrial fields, and others. The high efficiency requirement is crucial to operating a PWM rectifier in various applicati...
This paper proposes a constant-frequency model predictive direct power control (CF-MPDPC) method for a fault-tolerant bidirectional voltage-source converter (BVSC). The method can enhance the reliability and fault-tolerant operation capability of BVS...
This paper proposes a computationally efficient and robust direct model predictive control (DMPC) technique with enhanced steady-state performance for power converters tied to the electric utility. The discrete space vector modulation (DSVM) method i...
Several control strategies of the finite control set model predictive controls (FCS-MPC) have been proposed for power converters, such as predictive current control (PCC), direct predictive power control (DPPC), and predictive voltage control (PVC)....
This paper explores the feasibility of multilevel dual-active bridge-inverter (DABMI) applications for grid-connected applications of a modern Model of Predictive Direct Power Control (MPDPC) based on the conservative power theory (CPT). In the case...
This research proposes an improved finite control set direct power model predictive control method (FCS-DPMPC) for grid-tie distributed generation (DG). FCS-DPMPC predicts the system outcomes using the system model. During the next sampling time, a v...
This paper proposes a model predictive direct power control scheme for nonredundant fault tolerant grid-connected bidirectional voltage source converter (BVSC) with balanced dc-link split capacitor voltage and high reliability. Based on the operation...
Recent advances in power converter applications with highly demanding control goals require the efficient implementation of superior control strategies. However, the real-time application of such control strategies demands high computational power th...
This paper proposes a simplified predictive direct power control for the grid-tied quasi Z-source inverter. The proposed control implements a model predictive control structure to achieve the maximum obtainable power from the collected PV source. The...
This paper proposes a novel Fuzzy-MPDTC control applied to a fuel cell battery electric vehicle whose traction is ensured using a permanent magnet synchronous motor (PMSM). On the traction side, model predictive direct torque control (MPDTC) is used...
Dual-port direct drive wave energy power generation systems (DP-DDWEPGS) have received widespread attention due to their smooth and zero-free output power, compared to single-port direct drive wave energy power generation systems (SP-DDWEPGS) which h...
In this paper, a direct power predictive controller (DPPC) is derived for a current source inverter (CSI) based single stage photovoltaic (PV) system. The equations of the dynamics, including AC and DC filters, are formulated directly for the PV powe...
Direct power control (DPC) is widely recognized for its simplicity and fast dynamic response; however, conventional implementations based on hysteresis comparators suffer from critical limitations, including variable switching frequency and pronounce...
This paper presents an analysis of a new application of different direct matrix converter topologies used as power interfaces in AC, DC, and hybrid microgrids, with model predictive current control. Such a combination of a converter and control strat...
The control techniques of the brushless DC (BLDC) motor have gained a large amount of interest in recent years, with their use being implemented in order to achieve a high-performance drive, including quick transient response and high-quality wavefor...
There has always been a high expectation that wind generation systems would capture maximum power and integrate properly with the grid. Utilizing a wind generation system with increased management to meet the growing electricity demand is a clever wa...
Aiming at the delay caused by the phase-locked loop (PLL) and harmonic detection in the traditional control of a series active power filter (SAPF), a deadbeat direct control (DBDC)-based finite control set model predictive control (FCS-MPC) strategy...
Conventional model predictive control (MPC)-based direct power control of the three-phase full-bridge AC/DC converter usually suffers from the parametric coupling between active and reactive powers. A reference change of either the active or reactive...
This paper presents a novel Model Predictive Direct Power Control (MPDPC) approach for the pulse width modulation (PWM) rectifiers in the Aircraft Alternating Current Variable Frequency (ACVF) power system. The control performance of rectifiers may b...
The rapid evolution of modern power systems, driven by the large-scale integration of renewable energy sources and the emergence of smart grids, presents new challenges in maintaining grid stability, power quality, and control reliability. As critica...
A direct drive wave power generation system (DDWPGS) has the advantages of a simple structure and easy deployment, and is the first choice to provide electricity for islands and operation platforms in the deep sea. However, due to the off-grid, the s...
Compared with the standard finite-set model-based predictive current control (FS-MPCC), the finite-set ultra-local model-based predictive current control (FS-ULMPCC) removes the use of actual system parameters and thus has some advantages like good r...
This study proposed a modified power strategy based on model predictive control for a grid-connected three-level T-type inverter. The controller utilizes the mathematical model to forecast the performance of the grid current, the balance of DC-bus ca...
Induction motor (IM) drives are considered one of the important technologies in modern industry. Several industrial applications, such as material handling and food and beverage applications, are driven and operated by modern AC drives. Moreover, mod...
This paper introduces a new formulated control scheme for enhancing the dynamic performance of a wind driven surface permanent magnet synchronous generator. The designed control scheme is based on predictive control theory, in which the shortcomings...
This paper presents the four-quadrant operation modes of bidirectional chargers for electric vehicles (EVs) framed in smart car parks. A cascaded model predictive control (MPC) scheme for the bidirectional two-stage off-board chargers is proposed. Th...
In this study, dynamic simulations of a wind turbine were performed to predict its dynamic performance, and the results were experimentally validated. The dynamic simulation received time-domain wind speed and direction data and predicted the power o...
Proton exchange membrane fuel cell–battery hybrid power systems provide an effective solution to overcome the limited endurance of battery-powered multirotor unmanned aerial vehicles. However, the highly transient power demands of quadcopter pl...
Despite the predictability and availability at large scale, wave energy conversion (WEC) has still not become a mainstream renewable energy technology. One of the main reasons is the large variations in the extracted power which could lead to instabi...
The total energy obtained from wind farms is one of the topics researched by scientists to meet technological and daily needs. However, the wake phenomenon has an adverse impact on total power generation. It has also been observed to cause fatigue lo...
The wake effect inside wind farms reduces the inflow wind speed and increases the turbulence intensity of downstream turbines, resulting in power loss and increased fatigue loads. Active yaw control can mitigate wake interference through collaborativ...
Electric vehicles are an important carrier for achieving energy savings and emission reductions in the transportation sector. As the decision-making core of the powertrain, the energy management strategy is responsible for power allocation and energy...
As much wind power is integrated into the power grid through power electronic equipment, the use of wind power is increased rapidly. Wind power system makes the power grid lack inertia and damping, thereby reducing power grid stability; in severe cas...
Medium- and high-power drive applications have grown since the past decade as the most common solution for high demanding industrial processes. Multilevel converters, in particular the three-level neutral point clamped (3L-NPC) topology driving mediu...
This paper deals with the design, control, and implementation of a three-phase ac–ac mobile utility power supply using a matrix converter for airplane servicing applications. Using a matrix converter as a compact direct ac-to-ac converter can provide...
The adoption of Interior Permanent Magnet Synchronous Motor (IPMSM) in Battery Electric Vehicle (BEV) and Plug-in Hybrid Electric Vehicle (PHEV) drives the need for innovative approaches to improve control performance and power conversion efficiency....
Maximizing the power output of wind farms is critical for improving the economic viability and grid integration of renewable energy. Active wake control (AWC) strategies, such as yaw-based wake steering, offer significant potential for power generati...
The power system, which is also one of the most crucial parts of fuel cell cars, marks the biggest distinction between them and conventional automobiles. Fuel cell hybrid power systems are reviewed in this paper along with their current state of rese...
Permanent magnet synchronous generator (PMSG) wind power system with full power rating converter configuration is especially suitable for wind energy applications. Direct model predictive control (DMPC) has led to more possibilities in terms of choic...
With the rapid expansion of the supply of renewable energy in accordance with the global energy transition policy, the wind power generation industry is attracting attention. Subsequently, various wind turbine control technologies have been widely de...
Converter blocking is a serious malfunction encountered in high voltage direct current (HVDC) transmission systems. During sending-end converter blocking, the resultant active power and reactive power surplus in the sending-end power system lead to a...
This work proposes a hybrid drive controlled configuration, using a minimum emissions search algorithm, which ensures the operation of the Internal Combustion Engine (ICE) in its fuel efficiency range, minimizing CO
The matrix converter (MC) is a promising converter that performs the direct AC-to-AC conversion. Model predictive control (MPC) is a simple and powerful tool for power electronic converters, including the MC. However, weighting factor design and heav...
In recent years, the electric vehicles (EVs) power management strategy has been developed in order to reduce battery discharging power and fluctuation when an EV requires high and rapid discharging power due to frequent stop-and-go driving operations...
The segment control of active twist rotor is investigated to evaluate the effectiveness in rotor power reduction. A numerical model for predicting the isolated rotor power and loads in steady level flights is deployed and validated. A parametric swee...
On model predictive control, the weighting factors are often challenging to tune, which usually relies on trial-and-error methods. To bypass this inconvenience, this paper enhances a previously proposed weightless method applied to Finite Control Set...
When the Risley prism pair is used for target tracking, the nonlinear relationship between beam deflection and prism rotation makes tracking performance highly dependent on precise and stable motor control over a wide speed range. Although the brushl...
of 9