1,332 Results Found

Developing bone scaffolds can greatly improve the patient’s quality of life by accelerating the rehabilitation process. In this paper, we studied the process of composite polycaprolactone supercritical foaming for tissue engineering. The influe...

Polycaprolactone (PCL) and polycaprolactone-hydroxyapatite (PCL-HA) scaffolds were produced by foaming in supercritical carbon dioxide (scCO₂) at 20 MPa, as well as in one-step foaming and impregnation process using carvacrol as an antibacterial agen...

The main objective of this work is the grafting of polycaprolactone diol (PCL) on the surface of oxidized nanocelluloses (ONC) in order to enhance the compatibility between the hydrophilic cellulose nanofibres and the hydrophobic polymer matrix. This...

Three novel biomaterials obtained via inclusion complexes of β–cyclodextrin, 6-deoxi-6-amino-β–cyclodextrin and epithelial growth factor grafted to 6-deoxi-6-amino-β–cyclodextrin with polycaprolactone. Furthermore, so...

Skin wound healing is one of the most challenging processes for skin reconstruction, especially after severe injuries. In our study, nanofiber membranes were prepared for wound healing using an electrospinning process, where the prepared nanofibers w...

The aim of the present study was a simulation of the injection molding process of polycaprolactone filament sticks for further 3D printing of osteochondral implants. Polycaprolactone data are not available in the data banks of popular injection moldi...

In the context of guided bone regeneration (GBR), the selection of an appropriate resorbable membrane plays a crucial role in the clinical success of the procedure. Precise knowledge about the distinct differences in properties is fundamental for cor...

In this work, different materials for three-dimensional (3D)-printing were studied, which based on polycaprolactone with two natural additives, gum rosin, and beeswax. During the 3D-printing process, the bed and extrusion temperatures of each formula...

New advances in materials science and medicine have enabled the development of new and increasingly sophisticated biomaterials. One of the most widely used biopolymers is polycaprolactone (PCL) because it has properties suitable for biomedical applic...

Background/Objectives: A nanostructured membrane of polycaprolactone (a synthetic polymer) was synthesized using an electrospinning technique aiming to enhance its hydrophilicity and rate of degradation by surface modification via aminolysis. Since p...

Polycaprolactone (PCL) is widely utilized in biomedical applications such as tissue engineering and drug delivery; however, its limited bioactivity remains a key challenge. In this study, bioactive curcumin–polycaprolactone block copolymers (MC...

This work contains an analysis of the impact of modifying a bioresorbable polymer—polycaprolactone (PCL)—with various additives on its antibacterial properties. To this end, samples of PCL filament containing various content levels of gra...

Polycaprolactone nanofibers are used as scaffolds in the field of tissue engineering for tissue regeneration or drug delivery. Polycaprolactone (PCL) is a biodegradable hydrophobic polyester used to obtain implantable nanostructures, which are clinic...

Poly(furfuryl alcohol) (PFA) is a bioresin synthesized from furfuryl alcohol (FA) that is derived from renewable saccharide-rich biomass. In this study, we compounded this bioresin with polycaprolactone (PCL) for the first time, introducing new funct...

Nanofibers are well known as a beneficial type of structure for tissue engineering. As a result of the high acquisition cost of the natural polymers and their environmentally problematic treatment (toxic dissolution agents), artificial polymers seem...

Foamed polycaprolactone impregnated with quercetin was carried out with a batch foaming technique using supercritical CO₂. The experimental design was developed to study the influence of pressure (15–30 MPa), temperature (308–333 K), and...

Skin is a hierarchical and multi-cellular organ exposed to the external environment with a key protective and regulatory role. Wounds caused by disease and trauma can lead to a loss of function, which can be debilitating and even cause death. Acceler...

Various compositions of barium carbonate (BaCO₃) loaded polycaprolactone (PCL) composites were prepared, including 2.5/97.5, 10/90, 30/70, 50/50 and 90/10 (PCL/BaCO₃), via re-precipitation technique. Small-scale column tests were conducted to study t...

Electrosprayed polycaprolactone (PCL) microparticles are widely used in medical tissue engineering, drug control release delivery, and food packaging due to their prominent structures and properties. In electrospraying, the selection of a suitable so...

Electrospun nanofiber mesh has previously been used as an air filtration device. However, the qualification of polycaprolactone (PCL) nanofiber mesh cloth in face masks to protect individuals against airborne particles carrying microorganisms has yet...

Hyperbranched polycaprolactone with controlled structure was synthesized by reversible addition-fragmentation chain transfer radical ring-opening polymerization along with self-condensed vinyl polymerization (SCVP) of 2-methylene-1,3-dioxepane (MDO)....

Natural extracts of plant origin are used as anti-aging compounds of biodegradable polymers. Coffee, cocoa, or cinnamon extracts in amounts from 0.5 to 10 wt.% were added to the polycaprolactone matrix. The manufactured materials were aged at elevate...

The polymeric ouzo effect is an energy-efficient and robust method to create nanoparticles with biologically degradable polymers. Usually, a discontinuous or semi-continuous process is employed due to its low technical effort and the fact that the am...

Polycaprolactone (PCL) is a widely used polymer in biomedical applications due to its excellent processability, ductility, and biodegradability. However, single-component PCL devices often fail to meet the multifunctional and high-performance demands...

An investigation of the interactions between bio-polymeric nanoparticles (NPs) and the RAW 264.7 mouse murine macrophage cell line has been presented. The cell viability, immunological response, and endocytosis efficiency of NPs were studied. Biopoly...

Polycaprolactone (PCL) is widely used in tissue engineering due to its interesting properties, namely biocompatibility, biodegradability, elastic nature, availability, cost efficacy, and the approval of health authorities such as the American Food an...

Polycaprolactone (PCL) is a resorbable semicrystalline polymer that degrades slowly via hydrolysis and has applications in medical implants and drug delivery. As a result of its low melting point, PCL can be processed easily by conventional polymer p...

This study was conducted to compare 3D-printed polycaprolactone (PCL) and polycaprolactone/β-tricalcium phosphate (PCL/β-TCP) membranes with a conventional commercial collagen membrane in terms of their abilities to facilitate guided bone regeneratio...

Insufficient vascular growth in the area of artificial-material implantation contributes to ischemia, fibrosis, the development of bacterial infections, and tissue necrosis around the graft. The purpose of this study was to evaluate angiogenesis afte...

This study develops a new solvent-compatible microfluidic chip based on phenol formaldehyde resin (PFR). In addition to its solvent-resistant characteristics, this microfluidic platform also features easy fabrication, organization, decomposition for...

This article introduces a kind of composite material made of kapok fibre and polycaprolactone by the hot-pressing method. The effects of volume density, mass fraction of kapok fibre, and thickness on the sound-absorption performance of composites wer...

The spread of bacterial, fungal, and viral diseases by airborne aerosol flows poses a serious threat to human health, so the development of highly effective antibacterial, antifungal and antiviral filters to protect the respiratory system is in great...

The present work reports the synthesis and characterization of polycaprolactone fibers loaded with particulate calcium magnesium silicates, to form composite materials with bioresorbable and bioactive properties. The inorganic powders were achieved t...

Hybrid scaffolds obtained by combining two or more biopolymers are studied in the context of tissue regeneration due to the possibility of achieving new functional properties or structural features. The aim of this work was to produce a new type of h...

The use of biodegradable polymers in daily life is increasing to reduce environmental hazards. In line with this, the present study aimed to develop a fully biodegradable polymer composite that was environmentally friendly and exhibited promising mec...

As breast conserving surgery increases in the surgical treatment of breast cancer, partial mastectomy is also increasing. Polycaprolactone (PCL) is a polymer that is used as an artifact in various parts of the human body based on the biocompatibility...

Recently, three-dimensional printing (3DP) technology has been widely adopted in biology and biomedical applications, thanks to its capacity to readily construct complex 3D features. Using hot-melt extrusion 3DP, scaffolds for bone tissue engineering...

Tissue-engineered substitutes have shown great promise as a potential replacement for current tissue grafts to treat tendon/ligament injury. Herein, we have fabricated aligned polycaprolactone (PCL) and gelatin (GT) nanofibers and further evaluated t...

The small pore size of electrospun membranes prevents their use as three-dimensional scaffolds. In this work, we produced polycaprolactone (PCL) electrospun fibrous membranes with expanded pores by incorporating chitosan (CS) granules into the PCL so...

Nanocomposites obtained from the incorporation of synthesized TiO₂ nanoparticles (≈10 nm average primary particle size) in different amounts, ranging from 0.5 to 5 wt.%, into a biodegradable polycaprolactone matrix are achieved via a straightforward...

(1) Introduction: Polycaprolactone (PCL) materials have been developed with components that promote bone growth. The main objective of this work was to evaluate the biocompatibility and cytotoxic effects that different combinations of PCL with nanohy...

The tremendous problem with plastic waste accumulation has determined an interest in biodegradation by effective degraders and their enzymes, such as thermophilic enzymes, which are characterized by high catalytic rates, thermostability, and optimum...

The need for biodegradable and biocompatible polymers is growing quickly, particularly in the biomedical and environmental industries. Cellulose acetate, a natural polysaccharide, can be taken from plants and modified with polycaprolactone to improve...

This study shows that chitosan (CS) could be highly useful as a coupling agent in phosphate glass fibre/polycaprolactone (PGF/PCL) composites, as it improved the interfacial shear strength by up to 78%. PGFs of the composition 45P₂O₅–5B₂O₃&ndas...

The agrifood industry shows one of the widest ranges of possible end products from crops, such as fruits, legumes, cereals, and tubers. The raw material is generally collected and processed industrially, producing a significant amount of organic wast...

This paper focuses on developing, fabricating, and characterizing composite polycaprolactone (PCL) membranes reinforced with titanium dioxide nanoparticles (NPs) elaborated by using two solvents; acetic acid and a mixture of chloroform and N,N-dimeth...

Polycaprolactone (PCL) is a synthetic polymer with good mechanical properties that are useful to produce biomaterials of clinical application. It can be successfully combined with chitosan, which enhances the biomaterial properties through the modula...

Photochromic polycaprolactone (PCL) nanofibers were prepared through electrospinning. Various factors, including the solvent system, the concentration of PCL, the viscosity of the solution, and the electrical conductivity, influence the morphology of...

The benefit of being acquainted with thermal properties, especially the thermal stability of polyurethanes (PU), and simplified methods for their improvement is manifold. Considering this, the effect of embedding different amounts of unmodified and s...

The surface and protein adsorption properties of 316L stainless steel (316L SS) modified with polycaprolactone (PCL) films are systematically investigated. The wettability of the PCL films was comparable to that of bare 316L SS because the rough surf...