Skip to Content

254 Results Found

  • Article
  • Open Access
12 Citations
3,111 Views
9 Pages

22 June 2022

Superhydrophilicity performs well in anti-fog and self-cleaning applications. In this study, polycarbonate substrate was used as the modification object because of the low surface energy characteristics of plastics. Procedures that employ plasma bomb...

  • Article
  • Open Access
5 Citations
3,060 Views
13 Pages

Surface Antifouling Modification on Polyethylene Filtration Membranes by Plasma Polymerization

  • An-Li Hou,
  • Szu-Yi Wang,
  • Wen-Pin Lin,
  • Wei-Hsuan Kuo and ,
  • Tsung-Jen Wang and
  • Meng-Jiy Wang
  • + 1 author+ 0 author

6 November 2020

Surface modification on microporous polyethylene (PE) membranes was facilitated by plasma polymerizing with two hydrophilic precursors: ethylene oxide vinyl ether (EO1V) and diethylene oxide vinyl ether (EO2V) to effectively improve the fouling again...

  • Article
  • Open Access
6 Citations
2,784 Views
13 Pages

Application of Spectroscopic Analysis for Plasma Polymerization Deposition onto the Inner Surfaces of Silicone Tubes

  • Himanshu Mishra,
  • Nima Bolouki,
  • Stephen T. Hsieh,
  • Chuan Li and ,
  • Weite Wu and
  • Jang-Hsing Hsieh
  • + 1 author+ 0 author

19 June 2022

In the current study, plasma-polymerized methyl methacrylate (PP-MMA) generation on the inner surface of a silicone tube was performed in a capacitively coupled discharge reactor. The possibility of generating plasma inside the tube was analyzed and...

(This article belongs to the Section High-Energy Beam Surface Engineering and Coatings)
  • Article
  • Open Access
24 Citations
3,996 Views
15 Pages

Surface Modification of Cellulose Nanocrystals with Lactone Monomers via Plasma-Induced Polymerization and Their Application in ABS Nanocomposites

  • Ramón Díaz de León,
  • Ediberto Guzmán,
  • Ricardo López González,
  • Alejandro Díaz Elizondo and ,
  • Ilse Magaña,
  • Guadalupe Neira,
  • Adali Castañeda Facio and
  • Luis Valencia
  • + 3 authors+ 0 author

13 August 2021

The growing concern for environmental problems has motivated the use of materials obtained from bio-based resources such as cellulose nanocrystals which have a promising application acting as fillers or reinforcements of polymeric materials. In this...

(This article belongs to the Special Issue Nanocellulose: Polymer Nanocomposites and all-Cellulose Materials)
  • Article
  • Open Access
2 Citations
2,432 Views
16 Pages

28 September 2023

To chemically functionalize the Ti6Al4V alloy surface, a custom-made low-temperature atmospheric pressure plasma reactor device was used to polymerize heptylamine on it. The effect of different deposition times, an important process parameter, was al...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
26 Citations
6,131 Views
15 Pages

Fast Surface Hydrophilization via Atmospheric Pressure Plasma Polymerization for Biological and Technical Applications

  • Hana Dvořáková,
  • Jan Čech,
  • Monika Stupavská,
  • Lubomír Prokeš and ,
  • Jana Jurmanová,
  • Vilma Buršíková,
  • Jozef Ráheľ and
  • Pavel Sťahel
  • + 3 authors+ 0 author

4 October 2019

Polymeric surfaces can benefit from functional modifications prior to using them for biological and/or technical applications. Surfaces considered for biocompatibility studies can be modified to gain beneficiary hydrophilic properties. For such modif...

(This article belongs to the Special Issue Polymer Biointerfaces)
  • Article
  • Open Access
34 Citations
7,322 Views
21 Pages

Surface Modification of Fumed Silica by Plasma Polymerization of Acetylene for PP/POE Blends Dielectric Nanocomposites

  • Xiaozhen He,
  • Ilkka Rytöluoto,
  • Rafal Anyszka,
  • Amirhossein Mahtabani and ,
  • Eetta Saarimäki,
  • Kari Lahti,
  • Mika Paajanen,
  • Wilma Dierkes and
  • Anke Blume
  • + 4 authors+ 0 author

28 November 2019

Novel nanocomposites for dielectric applications-based polypropylene/poly(ethylene-co-octene) (PP/POE) blends filled with nano silica are developed in the framework of the European ‘GRIDABLE’ project. A tailor-made low-pressure-plasma reactor was app...

(This article belongs to the Collection Silicon-Containing Polymeric Materials)
  • Article
  • Open Access
22 Citations
4,321 Views
21 Pages

4 January 2022

This study aims to investigate the surface characterization and pre-osteoblast biological behaviors on the three-dimensional (3D) poly(ε-caprolactone)/β-tricalcium phosphate (β-TCP) scaffold modified by amine plasma-polymerization....

(This article belongs to the Section Biomaterials)
  • Review
  • Open Access
164 Citations
19,188 Views
54 Pages

30 August 2023

This comprehensive review begins by tracing the historical development and progress of cold plasma technology as an innovative approach to polymer engineering. The study emphasizes the versatility of cold plasma derived from a variety of sources incl...

(This article belongs to the Special Issue Plasma Processes for Polymers II)
  • Article
  • Open Access
7 Citations
3,158 Views
11 Pages

Preparation of a Biofunctionalized Surface on Titanium for Biomedical Applications: Surface Properties, Wettability Variations, and Biocompatibility Characteristics

  • Mao-Suan Huang,
  • Chia-Yu Wu,
  • Keng-Liang Ou,
  • Bai-Hung Huang and ,
  • Tien-Hsin Chang,
  • Kazuhiko Endo,
  • Yung-Chieh Cho,
  • Hsing-Yu Lin and
  • Chung-Ming Liu
  • + 4 authors+ 0 author

20 February 2020

This study developed a promising approach (low-temperature plasma polymerization with allylamine) to modify the titanium (Ti) surface, which helps the damaged tissue to heal faster. The Ti surface was first cleaned by argon (Ar) plasma, and then the...

(This article belongs to the Special Issue Application of the Biocomposite Materials on Bone Reconstruction)
  • Article
  • Open Access
12 Citations
4,547 Views
11 Pages

Acetic-Acid Plasma-Polymerization on Polymeric Substrates for Biomedical Application

  • Shu-Chuan Liao,
  • Ko-Shao Chen,
  • Jui-Lung Chien,
  • Su-Chen Chen and
  • Win-Li Lin

Cold plasma is an emerging technology offering many potential applications for regenerative medicine or tissue engineering. This study focused on the characterization of the carboxylic acid functional groups deposited on polymeric substrates using a...

  • Review
  • Open Access
109 Citations
13,117 Views
38 Pages

Plasma Modification and Synthesis of Membrane Materials—A Mechanistic Review

  • Jingshi Wang,
  • Xiao Chen,
  • Rackel Reis,
  • Zhiqiang Chen and ,
  • Nick Milne,
  • Bjorn Winther-Jensen,
  • Lingxue Kong and
  • Ludovic F. Dumée
  • + 3 authors+ 0 author

Although commercial membranes are well established materials for water desalination and wastewater treatment, modification on commercial membranes is still necessary to deliver high-performance with enhanced flux and/or selectivity and fouling resist...

(This article belongs to the Special Issue Nanostructured Membranes)
  • Article
  • Open Access
8 Citations
3,777 Views
13 Pages

Near-Plasma Chemical Surface Engineering

  • Paula Navascués,
  • Urs Schütz,
  • Barbara Hanselmann and
  • Dirk Hegemann

15 January 2024

As a new trend in plasma surface engineering, plasma conditions that allow more-defined chemical reactions at the surface are being increasingly investigated. This is achieved by avoiding high energy deposition via ion bombardment during direct plasm...

(This article belongs to the Special Issue New Trends in Plasma Technology for Nanomaterials and Applications)
  • Article
  • Open Access
15 Citations
5,005 Views
17 Pages

Fully Bio-Based Elastomer Nanocomposites Comprising Polyfarnesene Reinforced with Plasma-Modified Cellulose Nanocrystals

  • Ilse Magaña,
  • Dimitrios Georgouvelas,
  • Rishab Handa,
  • María Guadalupe Neira Velázquez and ,
  • Héctor Ricardo López González,
  • Francisco Javier Enríquez Medrano,
  • Ramón Díaz de León and
  • Luis Valencia
  • + 3 authors+ 0 author

21 August 2021

This article proposes a process to prepare fully bio-based elastomer nanocomposites based on polyfarnesene and cellulose nanocrystals (CNC). To improve the compatibility of cellulose with the hydrophobic matrix of polyfarnesene, the surface of CNC wa...

(This article belongs to the Special Issue Nanocellulose: Polymer Nanocomposites and all-Cellulose Materials)
  • Review
  • Open Access
5 Citations
2,278 Views
34 Pages

9 April 2026

Polymer films and coatings play an increasingly critical role in extending material functionality across industrial, biomedical, and environmental applications. Recent advances in surface engineering have enabled precise control of interfacial proper...

(This article belongs to the Special Issue Bio-Based Polymeric Materials for Biomedical Applications)
  • Article
  • Open Access
20 Citations
5,660 Views
12 Pages

10 September 2018

When stainless steel is implanted in human bodies, the corrosion resistance and biocompatibility must be considered. In this study, first, a protective organic silicone film was coated on the surface of stainless steel by a plasma deposition techniqu...

  • Article
  • Open Access
17 Citations
4,933 Views
19 Pages

Plasma Polymerized Allylamine—The Unique Cell-Attractive Nanolayer for Dental Implant Materials

  • J. Barbara Nebe,
  • Henrike Rebl,
  • Michael Schlosser,
  • Susanne Staehlke and ,
  • Martina Gruening,
  • Klaus-Dieter Weltmann,
  • Uwe Walschus and
  • Birgit Finke
  • + 3 authors+ 0 author

5 June 2019

Biomaterials should be bioactive in stimulating the surrounding tissue to accelerate the ingrowth of permanent implants. Chemical and topographical features of the biomaterial surface affect cell physiology at the interface. A frequently asked questi...

  • Article
  • Open Access
13 Citations
4,972 Views
8 Pages

Surface Functionalization of Exposed Core Glass Optical Fiber for Metal Ion Sensing

  • Akash Bachhuka,
  • Sabrina Heng,
  • Krasimir Vasilev,
  • Roman Kostecki and ,
  • Andrew Abell and
  • Heike Ebendorff-Heidepriem
  • + 1 author+ 0 author

17 April 2019

One of the biggest challenges associated with exposed core glass optical fiber-based sensing is the availability of techniques that can be used to generate reproducible, homogeneous and stable surface coating. We report a one step, solvent free metho...

(This article belongs to the Special Issue Optical Fiber Sensors: Development and Applications)
  • Article
  • Open Access
7 Citations
5,596 Views
14 Pages

Plasma Surface Polymerized and Biomarker Conjugated Boron Nitride Nanoparticles for Cancer-Specific Therapy: Experimental and Theoretical Study

  • Elizaveta S. Permyakova,
  • Liubov Yu. Antipina,
  • Philipp V. Kiryukhantsev-Korneev,
  • Andrey M. Kovalskii and ,
  • Josef Polčak,
  • Anton Manakhov,
  • Kristina Yu. Gudz,
  • Pavel B. Sorokin and
  • Dmitry V. Shtansky
  • + 4 authors+ 0 author

21 November 2019

A new low-pressure plasma-based approach to activate the surface of BN nanoparticles (BNNPs) in order to facilitate the attachment of folate acid (FA) molecules for cancer-specific therapy is described. Plasma treatment of BNNPs (BNNPsPT) was perform...

  • Review
  • Open Access
16 Citations
3,098 Views
30 Pages

Research Progress on Polymer Materials in High-Voltage Applications: A Review

  • Xuxuan Pan,
  • Zhuo Wang,
  • Wenhao Zhou,
  • Feng Liu and
  • Jun Chen

20 January 2026

High-voltage equipment imposes increasingly stringent demands on polymeric insulating materials, particularly in terms of dielectric strength, space charge suppression, thermo-electrical stability, and interfacial reliability. Conventional polymers a...

(This article belongs to the Section F: Electrical Engineering)
  • Review
  • Open Access
1 Citations
839 Views
34 Pages

25 August 2026

Nanofiltration membranes have emerged as a crucial class of pressure-driven separation materials, positioned between ultrafiltration and reverse osmosis in terms of selectivity, permeance, operating pressure, and energy consumption. Their ability to...

(This article belongs to the Special Issue Preparation and Application of Polymer Membranes)
  • Article
  • Open Access
4 Citations
4,217 Views
14 Pages

Field Deployable Method for Gold Detection Using Gold Pre-Concentration on Functionalized Surfaces

  • Agnieszka Zuber,
  • Akash Bachhuka,
  • Steven Tassios,
  • Caroline Tiddy and ,
  • Krasimir Vasilev and
  • Heike Ebendorff-Heidepriem
  • + 1 author+ 0 author

15 January 2020

Gold in a rock is usually associated with other elements, forms nuggets, or is hosted within the crystal lattice of a mineral (e.g., pyrite) and is often heterogeneously distributed and trapped inside the rock matrix even after crushing. Gold can be...

(This article belongs to the Section Chemical Sensors)
  • Article
  • Open Access
27 Citations
4,513 Views
15 Pages

19 December 2022

The gypsum and calcite scaling propensities of the thin-film composite polyamide (PA-TFC) reverse osmosis (RO) membrane, modified with a tethered surface layer of polyacrylic acid (PAA) chains, was evaluated and compared to the scaling of selected co...

(This article belongs to the Special Issue Recent Advances in Desalination Based on Membrane Technologies)
  • Article
  • Open Access
12 Citations
9,682 Views
14 Pages

2 May 2012

Temperature induced frequency shifts may compromise the sensor response of polymer coated acoustic wave gas-phase sensors operating in environments of variable temperature. To correct the sensor data with the temperature response of the sensor the la...

  • Communication
  • Open Access
38 Citations
7,940 Views
7 Pages

11 January 2019

The properties of a polydimethylsiloxane (PDMS) surface were modified by a one-step deposition of plasma polymerized hexamethyldisilazane (pp-HMDS) by the arc discharge method. Scanning electron microscopy, atomic force microscopy, and Fourier-transf...

(This article belongs to the Special Issue Advances in Organic and Polymeric Coatings )
  • Article
  • Open Access
33 Citations
7,391 Views
16 Pages

19 August 2018

The interaction of plasma with polymeric substrates generates both roughness and charging on the surface of the substrates. This work, toward the comprehension and, finally, the control of plasma-induced surface roughness, delves into the intertwined...

(This article belongs to the Special Issue Plasma-Based Surface Engineering)
  • Feature Paper
  • Article
  • Open Access
1 Citations
455 Views
16 Pages

Direct current (DC) surface flashover on polystyrene (PS) remains a critical bottleneck that impedes its reliable application in high-voltage insulation apparatus. To circumvent the protracted processing durations and stringent film-forming condition...

(This article belongs to the Section Functional Polymer Coatings and Films)
  • Article
  • Open Access
18 Citations
3,028 Views
23 Pages

8 July 2023

Polymeric surfaces have been increasingly plasma-activated to adopt adequate chemistries, enabling their use in different applications. An unavoidable surface oxygen insertion upon exposure to non-oxygen-containing plasmas was always observed and mai...

  • Article
  • Open Access
12 Citations
5,012 Views
12 Pages

6 February 2023

Poly(lactic acid) (PLA) is currently the most widely used material in 3D printing. PLA has good mechanical properties, chemical stability, and biodegradability, but its surface is hydrophobic and cannot be effectively used. The growth metabolism of a...

(This article belongs to the Special Issue Surface Coating for Biomedical Applications)
  • Article
  • Open Access
38 Citations
9,508 Views
16 Pages

23 April 2014

Low pressure radio frequency plasma-assisted deposition of 1-isopropyl-4-methyl-1,4-cyclohexadiene thin films was investigated for different polymerization conditions. Transparent, environmentally stable and flexible, these organic films are promisin...

(This article belongs to the Special Issue Organic Semiconductors)
  • Article
  • Open Access
5 Citations
3,525 Views
15 Pages

Local Inflammatory Response after Intramuscularly Implantation of Anti-Adhesive Plasma-Fluorocarbon-Polymer Coated Ti6AI4V Discs in Rats

  • Charlotte Koppe,
  • Andreas Hoene,
  • Uwe Walschus,
  • Birgit Finke and ,
  • Holger Testrich,
  • Christopher Pohl,
  • Nico Brandt,
  • Maciej Patrzyk,
  • Jürgen Meichsner and
  • Michael Schlosser
  • + 6 authors+ 1 author

11 August 2021

Orthopaedic implants and temporary osteosynthesis devices are commonly based on Titanium (Ti). For short-term devices, cell-material contact should be restricted for easy removal after bone healing. This could be achieved with anti-adhesive plasma-fl...

(This article belongs to the Special Issue Advances in Plasma Processes for Polymers)
  • Review
  • Open Access
15 Citations
3,918 Views
31 Pages

30 May 2024

In this review, we introduce recently developed plasma-based approaches for depositing and treating piezoelectric nanoparticles (NPs) and piezoelectric polymer films for nanogenerator (NG) and sensor applications. We also present the properties and a...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
1,326 Views
19 Pages

Thin-Film Formation from Lactic Acid via Open-Air Plasma Polymerization

  • Sho Yoshida,
  • Taiki Osawa,
  • Masaya Tahara,
  • Akito Shirai and ,
  • Hua-Ting Hsieh,
  • Taisei Fukawa,
  • Akane Yaida and
  • Akitoshi Okino
  • + 3 authors+ 0 author

This study investigates the formation mechanism of lactic-acid-derived coatings produced by open-air atmospheric-pressure plasma polymerization. A comparison of nebulization and bubbling precursor-delivery methods using FT-IR and XPS showed that the...

(This article belongs to the Special Issue Surface Science: Polymer Thin Films, Coatings and Adhesives (2nd Edition))
  • Article
  • Open Access
1 Citations
1,322 Views
17 Pages

6 February 2026

Smart polymers have attracted significant scientific interest in recent years because of their capability to modify their physical and/or chemical properties in response to external stimuli, including temperature, pH, and electric or magnetic fields....

(This article belongs to the Special Issue Functional Polymer Films for Surface Modification and Coating Applications)
  • Article
  • Open Access
5 Citations
4,032 Views
23 Pages

Plasma Processing of Low Vapor Pressure Liquids to Generate Functional Surfaces

  • Sandra Gaiser,
  • Urs Schütz,
  • Patrick Rupper and
  • Dirk Hegemann

19 December 2020

The concept of depositing solid films on low-vapor pressure liquids is introduced and developed into a top-down approach to functionalize surfaces by attaching liquid polyethylene glycol (PEG). Solid-liquid gradients were formed by low-pressure plasm...

(This article belongs to the Special Issue Plasma Polymers for Advanced Material Design)
  • Article
  • Open Access
16 Citations
6,554 Views
15 Pages

Fluoropolymer Film Formation by Electron Activated Vacuum Deposition

  • Kostyantyn Grytsenko,
  • Viachaslau Ksianzou,
  • Yurii Kolomzarov,
  • Peter Lytvyn and ,
  • Birgit Dietzel and
  • Sigurd Schrader
  • + 1 author+ 0 author

22 February 2021

Polytetrafluoroethylene (PTFE), polyhexafluoropropylene (PHFP) and polychlorotrifluoroethylene (PCTFE) were heated to their decomposition temperature in a high vacuum. The emitted fragments passed an electron cloud, condensed on a substrate and forme...

(This article belongs to the Special Issue Thin Films at Surfaces)
  • Article
  • Open Access
14 Citations
3,815 Views
16 Pages

Effectiveness of Surface Treatment with Amine Plasma for Improving the Biocompatibility of Maxillofacial Plates

  • Yeon-Woo Jeong,
  • Seunggon Jung,
  • Jeong Joon Han,
  • Hong-Ju Park and ,
  • Rok Young Kim,
  • Byung-Hoon Kim and
  • Min-Suk Kook
  • + 2 authors+ 0 author

13 August 2019

To date, no products have been presented for the surface treatment of metal plates used for repairing maxillofacial defects caused by trauma. Plasma surface treatment is a useful technique for chemically modifying the surfaces of biomaterials. Amine...

(This article belongs to the Special Issue Ti-Based Biomaterials: Synthesis, Properties and Applications)
  • Feature Paper
  • Article
  • Open Access
18 Citations
3,303 Views
11 Pages

Transparent Polyaniline Thin Film Synthesized Using a Low-Voltage-Driven Atmospheric Pressure Plasma Reactor

  • Jae Young Kim,
  • Shahzad Iqbal,
  • Hyo Jun Jang,
  • Eun Young Jung and ,
  • Gyu Tae Bae,
  • Choon Sang Park,
  • Bhum Jae Shin and
  • Heung Sik Tae
  • + 3 authors+ 0 author

8 March 2021

The use of low-voltage-driven plasma in atmospheric pressure (AP) plasma polymerization is considered as a simple approach to reducing the reactivity of the monomer fragments in order to prevent excessive cross-linking, which would have a negative ef...

(This article belongs to the Special Issue Advances in Plasmas)
  • Review
  • Open Access
159 Citations
18,958 Views
23 Pages

Controlled Surface Wettability by Plasma Polymer Surface Modification

  • Muzammil Iqbal,
  • Duy Khoe Dinh,
  • Qasim Abbas,
  • Muhammad Imran and ,
  • Harse Sattar and
  • Aqrab Ul Ahmad
  • + 1 author+ 0 author

9 May 2019

Inspired by nature, tunable wettability has attracted a lot of attention in both academia and industry. Various methods of polymer surface tailoring have been studied to control the changes in wetting behavior. Polymers with a precisely controlled we...

  • Review
  • Open Access
14 Citations
2,964 Views
22 Pages

Synthesis, Morphology, and Biomedical Applications of Plasma-Based Polymers: Recent Trends and Advances

  • Mohammad Mizanur Rahman Khan,
  • Shakila Parveen Asrafali and
  • Thirukumaran Periyasamy

24 September 2024

The achievement of large-scale applications of plasma-based polymers in biomedical sectors does not satisfy the appropriate level although a substantial amount of research is already performed. In this context, further investigations are necessary to...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
10 Citations
3,463 Views
18 Pages

Adhesion and Proliferation of Mesenchymal Stem Cells on Plasma-Coated Biodegradable Nanofibers

  • Anton M. Manakhov,
  • Anastasiya O. Solovieva,
  • Elizaveta S. Permyakova,
  • Natalya A. Sitnikova and ,
  • Lyubov S. Klyushova,
  • Philipp V. Kiryukhantsev-Korneev,
  • Anton S. Konopatsky and
  • Dmitry V. Shtansky
  • + 3 authors+ 0 author

Various biomedical applications of biodegradable nanofibers are a hot topic, as evidenced by the ever-increasing number of publications in this field. However, as-prepared nanofibers suffer from poor cell adhesion, so their surface is often modified....

(This article belongs to the Special Issue Feature Papers in Journal of Composites Science in 2022)
  • Article
  • Open Access
10 Citations
4,005 Views
15 Pages

Insights on the Atmospheric-Pressure Plasma-Induced Free-Radical Polymerization of Allyl Ether Cyclic Carbonate Liquid Layers

  • Edyta M. Niemczyk,
  • Alvaro Gomez-Lopez,
  • Jean R. N. Haler,
  • Gilles Frache and ,
  • Haritz Sardon and
  • Robert Quintana
  • + 1 author+ 0 author

25 August 2021

Plasma-induced free-radical polymerizations rely on the formation of radical species to initiate polymerization, leading to some extent of monomer fragmentation. In this work, the plasma-induced polymerization of an allyl ether-substituted six-member...

(This article belongs to the Special Issue Advances in Plasma Processes for Polymers)
  • Article
  • Open Access
6 Citations
3,228 Views
9 Pages

Antibacterial Thin Films Deposited from Propane–Butane Mixture in Atmospheric Pressure Discharge

  • Pavel Sťahel,
  • Věra Mazánková,
  • Daniela Podzemná,
  • Erika Podzemná and ,
  • Veronika Pizúrová,
  • Jana Jurmanová,
  • Lubomír Prokeš,
  • Marián Lehocký,
  • Kadir Ozaltin and
  • David Trunec
  • + 6 authors+ 1 author

15 January 2023

Antibacterial coatings on biomedical instruments are of great interest because they can suppress bacterial colonization on these instruments. In this study, antibacterial polymeric thin coatings were deposited on teflon substrates using atmospheric p...

(This article belongs to the Special Issue Frontiers in Antimicrobial Biomaterials)
  • Article
  • Open Access
28 Citations
10,426 Views
11 Pages

Evaluation of Osseointegration of Titanium Alloyed Implants Modified by Plasma Polymerization

  • Carolin Gabler,
  • Carmen Zietz,
  • Rebecca Göhler,
  • Andreas Fritsche and ,
  • Tobias Lindner,
  • Maximilian Haenle,
  • Birgit Finke,
  • Jürgen Meichsner,
  • Solvig Lenz and
  • Rainer Bader
  • + 8 authors+ 3 authors

11 February 2014

By means of plasma polymerization, positively charged, nanometre-thin coatings can be applied to implant surfaces. The aim of the present study was to quantify the adhesion of human bone cells in vitro and to evaluate the bone ongrowth in vivo, on t...

(This article belongs to the Special Issue Biologic Coatings for Orthopaedic Implant)
  • Article
  • Open Access
7 Citations
2,829 Views
15 Pages

30 November 2022

Hydrophobic and oleophilic Si-based cotton fabrics have recently gained a lot of attention in oil/water separation due to their high efficiency. In this study, we present the effect of O2 plasma pre-treatment on the final properties of two Si-based c...

(This article belongs to the Special Issue Nanomaterials for the Environmental Remediation of Water and Soil)
  • Article
  • Open Access
2 Citations
4,217 Views
16 Pages

17 April 2021

Droplet manipulation is important in the fields of engineering, biology, chemistry, and medicine. Many techniques, such as electrowetting and magnetic actuation, have been developed for droplet manipulation. However, the fabrication of the manipulati...

(This article belongs to the Special Issue Polymer Scaffolds for Tissue Engineering)
  • Article
  • Open Access
7 Citations
4,401 Views
19 Pages

30 October 2021

For the creation of thin films, the use of precursors in liquid phase offers a viable alternative when these chemicals are sensitive to high temperatures and phase changes. However, it requires appropriate liquid handling and deposition technologies...

(This article belongs to the Section High-Energy Beam Surface Engineering and Coatings)
  • Article
  • Open Access
7 Citations
3,833 Views
16 Pages

11 September 2024

Carbon fiber-reinforced plastics (CFRPs) have broad applications as lightweight structural materials due to their remarkable strength-to-weight ratio. Aluminum is often used as a bond coating to ensure adhesion between CFRPs and further coatings with...

(This article belongs to the Special Issue Microstructure, Friction and Wear, Hardness Properties and Numerical Simulation of Coatings)
  • Article
  • Open Access
41 Citations
5,097 Views
19 Pages

Laccase Enzyme Polymerization by Soft Plasma Jet for Durable Bioactive Coatings

  • Szymon Malinowski,
  • P. Anthony F. Herbert,
  • Jerzy Rogalski and
  • Justyna Jaroszyńska-Wolińska

16 May 2018

Conventional pin-to-point continuous wave Helium Corona plasma discharge was successfully used in Soft Plasma Polymerization (SPP) processes to immobilize into water and onto glass polymerized bioactive Cerrena unicolor laccase coatings. The coatings...

  • Article
  • Open Access
10 Citations
2,948 Views
18 Pages

A Method for the Immobilization of Chitosan onto Urinary Catheters

  • Alenka Vesel,
  • Nina Recek,
  • Rok Zaplotnik,
  • Albert Kurinčič and ,
  • Katja Kuzmič and
  • Lidija Fras Zemljič
  • + 1 author+ 0 author

1 December 2022

A method for the immobilization of an antibacterial chitosan coating to polymeric urinary medical catheters is presented. The method comprises a two-step plasma-treatment procedure, followed by the deposition of chitosan from the water solution. In t...

(This article belongs to the Section Materials Science)

of 6