- Article
To reduce the computational cost, the k-
To reduce the computational cost, the k-
In this paper, the major problems associated with detached eddy simulation (DES) (namely, modeled stress depletion (MSD) and slowing of the RANS to LES transition (RLT)) are discussed and reviewed, and relevant improvements are developed. A modified...
The present work focuses on the comparison of the numerical simulation of sheet/cloud cavitation with the Reynolds Average Navier-Stokes and Large Eddy Simulation(RANS and LES) methods around NACA0012 hydrofoil in water flow. Three kinds of turbulenc...
The subsonic flows around NACA 0012 aerofoils with a solid, a porous, and a poro-serrated trailing edge (TE) at a Reynolds number of 1 × 106 are investigated by a hybrid Reynolds-averaged Navier–Stokes (RANS)/large-eddy simulation (LES) a...
Attempts to mitigate the computational cost of fully resolved large-eddy simulation (LES) in the near-wall region include both the hybrid Reynolds-averaged Navier–Stokes/LES (HRL) and wall-modeled LES (WMLES) approaches. This paper presents an...
This paper presents an improved k-ω SST turbulence model to enhance the simulation accuracy of Bluff Body Bypassing Problems (BBBPs) within the Reynolds-Averaged Navier–Stokes (RANS) framework. Although RANS methods are computationally ef...
This work addresses the effects of blade tip-rake reformation on the performance of marine propellers using a low-cost potential-based vortex-lattice method (VLM) and the high fidelity artificial compressibility CFD-RANS solver MaPFlow. The primary f...
Background: Previous literature has demonstrated that footstep sounds can be related to the unique gait pattern of individuals. This paper investigates the potential of using footstep sounds as a diagnostic tool in gait analysis. Methods: Fifteen par...
A transonic hump with a Mach number (M∞) of 0.875 was utilized to compare the prediction capabilities of RANS, URANS, IDDES, and IDDES-SLA for shock-induced separation. The results matched the experimental data concerning pressure, friction coe...
Axial waterjets are widely used for marine propulsion due to their efficiency and maneuverability. However, conventional design procedures heavily rely on empirical correlations and simplified models, limiting their ability to fully exploit the hydro...
Tidal stream turbines (TST) are a promising option for electricity generation to meet the ever-increasing demand for energy. The actuator disk (AD) method is often employed to represent a TST, to evaluate the TST operating in a tidal flow. While this...
This paper presents two novel automated optimization approaches. The first one proposes a framework to optimize wind turbine blades by integrating multidisciplinary 3D parametric modeling, a physics-based optimization scheme, the Inverse Blade Elemen...
The Savonius wind turbine is a type of vertical axis wind turbine (VAWTs) that is simply composed of two or three arc-type blades which can generate power even under poor wind conditions. A modified Savonius wind turbine with novel blade shapes is in...
Estimating the Direction of Arrival (DOA) is a basic and crucial problem in array signal processing. The existing DOA methods fail to obtain reliable and accurate results when noise and reverberation occur in real applications. In this paper, an accu...
In this study, the hull form optimization process to minimize resistance of KCS (KRISO containership) at
The flow over alternating roughness strips oriented normally to the mean stream is studied using wall-modeled large-eddy simulations (WMLES) and improved delayed detached-eddy simulations (IDDES) (a hybrid method solving the Reynolds-averaged Navier&...
This paper presents an in-depth numerical analysis on the hydrodynamics of a bubble column. As in previous works on the subject, the focus here is on three important parameters characterizing the flow: interfacial forces, turbulence and inlet superfi...
The heating of oil and oil products is widely used to reduce energy losses during transportation. An approach is developed to determine the effective length of the heat exchanger and the temperature of the cold coolant (oil) at its outlet in the case...
This research addresses the demand for a computationally efficient numerical tool capable of predicting 3-D turbulent flows over 3-D hydrofoils, a critical step in ultimately addressing marine propeller or turbine performance. The related software de...
The very large eddy simulation (VLES) method was investigated for supersonic reacting flows in the present work. The advantages and characteristics of the VLES model and the widely used improved delayed detached eddy simulation (IDDES) method were re...
Stern flaps and interceptors are prevalent stern appendages on medium- to high-speed ships, designed to modify the sailing posture of ships and diminish resistance. Using the Reynolds-averaged Navier–Stokes (RANS) method combined with overset m...
Submarines are required to have good performance, which is influenced by their type of hull, hull conditions, and operational conditions. This study compares the resistance between a Modified-U209 (U209) submarine and the DARPA Suboff. The former is...
Liquid fuel nuclear reactors offer innovative possibilities in terms of nuclear reactor designs and passive safety systems. Molten Salts Reactors (MSRs) with a fast spectrum are a particular type of these reactors using liquid fuel. MSFRs often invol...
Background: Oncoplastic breast surgery combines traditional oncologic breast conservation with plastic surgery techniques to achieve improved aesthetic and quality-of-life outcomes without sacrificing oncologic safety. Clinical uptake and training re...
To investigate the application of synthetic jet technology in the control of the wake flow around a square cylinder, a two-dimensional numerical simulation study was conducted using CFD and the Reynolds-Averaged Navier-Stokes (RANS) method to simulat...
This study examines the impact of surrounding buildings and wind incidence angles on the aerodynamic loads of a high-rise building with a 1:1 base–edges and a 1:6 base–height ratio. CFD simulations were conducted using OpenFOAM with the c...
Shockwaves induce considerable flow separation loss; it is essential to reduce this using the flow control method. In this manuscript, a method for suppressing flow separation in turbomachinery through a constant adverse-pressure gradient was investi...
In Industry 4.0, the concept of a Smart Factory heralds a new phase in manufacturing; the Smart Factory System (SFS) will have a huge demand in Taiwan. However, the cost of constructing a factory system will be high, and the complexity processes and...
Management education holds promise for addressing deficiencies in interuniversity science, technology, engineering, and mathematics (STEM), as well as sustainability curricula. Accordingly, we designed, developed, implemented, and longitudinally eval...
The ongoing efforts to convert High-Performance Research Reactors (HPRRs) using Highly Enriched Uranium (HEU) to Low-Enriched Uranium (LEU) fuel require reliable thermal–hydraulic assessments of modified core designs. The involute-shaped fuel p...
This study utilizes three-dimensional simulations to investigate scour in combined wave–current flows around rectangular piles with various aspect ratios. The simulation model solves the Reynolds-averaged Navier–Stokes (RANS) equations us...
The modeling of floating tidal stream energy turbine (FTSET) systems demands significant computational resources, especially when incorporating fully coupled models that integrate hydrodynamics, mooring, motion response, and their interactions. In th...
Background: Zinc is an essential micronutrient that impacts host–pathogen interplay at infection. Zinc balances immune responses, and also has a proven direct antiviral action against some viruses. Importantly, zinc deficiency (ZD) is a common condit...
This study investigates the WAM-V (Wave Adaptive Modular Vessel) catamaran configuration, focusing on the hydrodynamic interaction between its articulated hulls. The unique hinged connection mechanism induces a relative angular displacement between t...
This study presents a hybrid CFD–ε–NTU–neural network framework for evaluating the thermal performance of compact heat exchangers installed in confined nacelle environments under severe space and weight constraints. Airflow...
Parallel sidewalls are the standard bounding walls in wind tunnels when making a wind tunnel model for free-flight condition. The consequence of confinement in wind tunnel tests, known as wall-interference, is one of the main sources of uncertainty i...
Amyotrophic lateral sclerosis (ALS) is a fatal neurodegenerative disease characterized by the loss of upper and lower motor neurons. One of its major genetic causes is C9ORF72, where mutations lead to hexanucleotide repeat expansions in the C9ORF72 g...
Harnessing Europe’s strong wave energy could support net-zero emissions goals, but extreme ocean loads still make wave energy expensive and delay the rollout of commercial wave-energy converters (WECs). To address this, the twin-floater CECO WE...
In this study, data assimilation using PIV measurement data of the cylinder wake obtained from wind tunnel tests was applied to tune the simulation model parameters of Detached Eddy Simulation (DES) to improve the accuracy of large-scale separated fl...
Aims: Structural lower limb-length discrepancies (LLLD) have been classically associated with the etiology of low back pain. However, their biomechanical effects on lower-limb muscle activity during running remain unclear. This pilot crossover study...
Peak vertical ground reaction force (
Background and objective: Although hard training is mandatory in elite level futsal training, few studies have proposed a biochemical follow up in futsal players during a whole season. Therefore, the aim of this study was to compare functional and bi...