Skip to Content

493 Results Found

  • Review
  • Open Access
167 Views
35 Pages

Strain Localization, Damage Evolution, and Fracture Mechanisms in Sheet-Metal Bending: A Review

  • Wenjun Huang,
  • Zheng Chen,
  • Dajin Liu,
  • Zipan Chen and ,
  • Mu Yang,
  • Shoudong Chen and
  • Jing Qin
  • + 2 authors+ 0 author

10 November 2026

Sheet-metal bending produces pronounced through-thickness strain gradients and localized deformation. The resulting damage and fracture depend on microstructure, specimen geometry, loading path, and failure criterion. This review examines bending con...

  • Article
  • Open Access
365 Views
18 Pages

Numerical Simulation of Casing Failure Induced by Mudstone Hydration: Strain Evolution and Localization Pattern

  • Kun Zhu,
  • Fanshun Meng,
  • Tianyu Yi,
  • Zhanyuan Liang and ,
  • Xiaoyu Zhang and
  • Tao Jiang
  • + 1 author+ 0 author

30 June 2026

Mudstone hydration is a critical factor contributing to casing failure during water injection operations in oilfield development. However, the relationship between hydration-induced stress evolution and casing failure mechanisms remains insufficientl...

(This article belongs to the Section Materials Processes)
  • Article
  • Open Access
3 Citations
1,165 Views
20 Pages

Stress–Strain and Structural Evolution on the Localized Interface of Stainless Steel Clad Plate

  • Yinpeng Wang,
  • Bo Gao,
  • Qiqing Tian,
  • Chunhui Jiang and ,
  • Lu Zhu,
  • Yanguang Cao,
  • Wei Wei and
  • Zhaodong Li
  • + 3 authors+ 0 author

10 July 2025

By applying different heat treatment processes (furnace cooling, air cooling, and water cooling), the stress–strain behavior of the localized interfacial region in weathering steel–stainless steel clad plates was investigated using nanoin...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
608 Views
29 Pages

27 May 2026

To investigate the effect of crack geometry on tensile deformation and strain localization in X46 pipeline steel thin-walled tubes, uniaxial tensile tests were conducted on specimens containing prefabricated cracks with different sizes, types, and or...

(This article belongs to the Section Metals and Alloys)
  • Proceeding Paper
  • Open Access
880 Views
8 Pages

31 December 2025

This study investigates the development of adiabatic shear bands (ASBs) in AISI 1045 carbon steel under high-strain-rate uniaxial compression, emphasizing the conditions governing their onset and growth. Split Hopkinson pressure bar (SHPB) experiment...

(This article belongs to the Proceedings of The 8th International Conference of Engineering Against Failure)
  • Article
  • Open Access
407 Views
14 Pages

In Situ Investigation of Temperature and Strain-Rate-Dependent Serrated Flow and Crack Evolution in Mn13 High–Manganese Steel

  • Ming Gao,
  • Yang Liu,
  • Yanling Zhang,
  • Yaqiang Li and ,
  • Qiang Liu and
  • Lei Cheng
  • + 1 author+ 0 author

14 August 2026

Temperature- and strain-rate-dependent serrated flow, localized plastic instability, and qualitative microcrack evolution in Mn13 Hadfield steel were investigated using stress–strain analysis and in situ tensile observation. Solution treatment...

(This article belongs to the Special Issue Metal Material Failure Analysis and Optimization)
  • Article
  • Open Access
1 Citations
2,226 Views
9 Pages

High Performance Mg Alloy with Designed Microstructure and Phases

  • Zhao Yang,
  • Chao Xu,
  • Shengnan Song,
  • Taiki Nakata and
  • Shigeharu Kamado

4 June 2024

A high strength and ductile Mg-Gd-Y-Zn-Zr alloy was designed and fabricated. The local strain evolution of the alloys during plastic deformation was analyzed using high-resolution digital image correlation (DIC). The results showed that the β pa...

(This article belongs to the Special Issue Environmentally Friendly Materials)
  • Article
  • Open Access
15 Citations
3,670 Views
23 Pages

Experimental Investigations of Micro-Meso Damage Evolution for a Co/WC-Type Tool Material with Application of Digital Image Correlation and Machine Learning

  • Yanling Schneider,
  • Reiner Zielke,
  • Chensheng Xu,
  • Muhammad Tayyab and ,
  • Ulrich Weber,
  • Siegfried Schmauder and
  • Wolfgang Tillmann
  • + 2 authors+ 0 author

25 June 2021

Commercial Co/WC/diamond composites are hard metals and very useful as a kind of tool material, for which both ductile and quasi-brittle behaviors are possible. This work experimentally investigates their damage evolution dependence on microstructura...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
8 Citations
3,282 Views
16 Pages

4 February 2023

The forming limit is an important failure criterion for polycrystalline sheet metals when approving the forming process. Recent developments in strain measurement technology, e.g., digital image correlation (DIC), enable the strain evolution to be ca...

(This article belongs to the Special Issue Emerging Topics on High Performance Alloys)
  • Article
  • Open Access
3 Citations
3,558 Views
22 Pages

Thermo-Structural Evolution of the Val Malenco (Italy) Peridotite: A Petrological, Geochemical and Microstructural Study

  • Wenlong Liu,
  • Yi Cao,
  • Junfeng Zhang,
  • Yanfei Zhang and ,
  • Keqing Zong and
  • Zhenmin Jin
  • + 1 author+ 0 author

28 October 2020

The Val Malenco peridotite massif is one of the largest exposed ultramafic massifs in Alpine orogen. To better constrain its tectonic history, we have performed a comprehensive petro-structural and geochemical study. Our results show that the Val Mal...

(This article belongs to the Special Issue Lattice-Preferred Orientation and Microstructures of Minerals and Their Implications for Seismic Anisotropy)
  • Article
  • Open Access
27 Citations
6,076 Views
13 Pages

18 February 2019

The deformation behavior of a 2024 aluminum alloy sheet at elevated temperatures was studied by uniaxial hot tensile tests over the nominal initial strain rate range of 0.001–0.1 s−1 and temperature range of 375–450 °C. In order...

(This article belongs to the Special Issue Constitutive Modelling for Metals)
  • Article
  • Open Access
502 Views
14 Pages

Anisotropic Mechanical Behavior and Localized Deformation Evolution in Q420 High-Strength Steel

  • Nan Guo,
  • Yangyang Li,
  • Yaoyao Li,
  • Xiqiang Ma and ,
  • Xiao Wang and
  • Chunyang Liu
  • + 1 author+ 0 author

18 June 2026

Q420 high-strength steel exhibits pronounced anisotropy due to its rolling process, and conventional uniaxial tensile testing is incapable of acquiring strain field evolution information during the local necking stage. In this study, quasi-static uni...

(This article belongs to the Special Issue Laser Welding and Cladding for Enhanced Mechanical Performance)
  • Article
  • Open Access
6 Citations
2,900 Views
17 Pages

18 August 2022

Coal mine reuse involves complex environments such as chemical erosion and dynamic perturbation. Therefore, the effect of chemical erosion on the dynamic behavior of the red sandstone was studied by split Hopkinson pressure bar (SHPB) tests under the...

(This article belongs to the Special Issue Failure Characteristics of Deep Rocks)
  • Article
  • Open Access
12 Citations
2,071 Views
14 Pages

2 August 2023

Wellbore instability mainly occurs in shale formations, and it is of great significance to deeply analyze the characteristics of shale-failure behavior to evaluate the stability of the shale surrounding the well wall during drilling. Through a uniaxi...

  • Article
  • Open Access
32 Citations
7,693 Views
19 Pages

Monitoring the Damage State of Fiber Reinforced Composites Using an FBG Network for Failure Prediction

  • Esat Selim Kocaman,
  • Erdem Akay,
  • Cagatay Yilmaz,
  • Halit Suleyman Turkmen and ,
  • Ibrahim Burc Misirlioglu,
  • Afzal Suleman and
  • Mehmet Yildiz
  • + 2 authors+ 0 author

3 January 2017

A structural health monitoring (SHM) study of biaxial glass fibre-reinforced epoxy matrix composites under a constant, high strain uniaxial fatigue loading is performed using fibre Bragg grating (FBG) optical sensors embedded in composites at various...

(This article belongs to the Special Issue Advances in Structural Health Monitoring for Aerospace Structures)
  • Article
  • Open Access
1 Citations
1,306 Views
20 Pages

30 July 2025

High-energy solid propellants are multiphase engineering materials, whose mechanical behavior is predominantly governed by the characteristics of embedded crystalline particles. While microstructural influences have been extensively examined, quantit...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
8 Citations
2,456 Views
15 Pages

Detecting the Deformation Behavior of Bimodal Ti-6Al-4V Using a Digital Image Correlation Technique

  • Mei-Yue Li,
  • Bin Zhang,
  • Zhu-Man Song,
  • Xue-Mei Luo and
  • Guang-Ping Zhang

26 October 2022

The evolution of a local strain of the Ti-6Al-4V alloy subjected to tensile loading was investigated in situ by using the digital image correlation technique. The results show that some local strain concentration areas have already appeared in the el...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
4 Citations
1,765 Views
34 Pages

4 July 2025

This study addresses the lack of detailed geodetic assessments of crustal strain accumulation along the central Yangsan Fault in southeastern Korea, an area of recognized but insufficiently characterized seismic potential. To tackle this, we applied...

(This article belongs to the Section Earth Sciences)
  • Communication
  • Open Access
3 Citations
3,207 Views
8 Pages

16 February 2022

The microstructural effect, including γ’ precipitate morphology and twin grains, of dwell fatigue behavior in a powder metallurgy nickel-based superalloy, was studied using crystal plasticity modeling. Strain rate and dwell sensitivities of 923 K wer...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
30 Citations
7,330 Views
39 Pages

Deformation-Induced Phase Transitions in iPP Polymorphs

  • Harm J. M. Caelers,
  • Enrico M. Troisi,
  • Leon E. Govaert and
  • Gerrit W. M. Peters

24 October 2017

This detailed study reveals the relation between structural evolution and the mechanical response of α -, β - and γ -iPP. Uni-axial compression experiments, combined with in situ WAXD measurements, allowed for the identification of the...

(This article belongs to the Special Issue Processing-Structure-Properties Relationships in Polymers)
  • Article
  • Open Access
663 Views
17 Pages

Strain Modeling and Revealed Slope Motion Mechanisms of the Taoping Paleo-Landslide from InSAR Observations

  • Siyu Lai,
  • Yinghui Yang,
  • Qian Xu,
  • Qiang Xu and ,
  • Jyr-Ching Hu and
  • Shi-Jie Chen
  • + 1 author+ 0 author

8 April 2026

The Taoping paleo-landslide poses a significant risk to local residents and critical infrastructure. However, traditional field surveys and deformation monitoring methods are often inadequate for capturing subtle, localized deformation characteristic...

  • Article
  • Open Access
17 Citations
2,600 Views
12 Pages

23 May 2024

Tensile tests were performed on Cu64Zr36 metallic glass at strain rates of 107/s, 108/s, and 109/s via classical molecular dynamics simulations to explore the underlying mechanism by which strain rate affects deformation behavior. It was found that s...

(This article belongs to the Special Issue Structure and Properties of Metallic Glasses)
  • Article
  • Open Access
8 Citations
2,640 Views
22 Pages

24 August 2025

Carbon fiber reinforced polymer (CFRP) composites are prone to developing localized material loss defects during long-term service, which can severely degrade their mechanical properties and structural reliability. To address this issue, this study p...

(This article belongs to the Section Sensor Materials)
  • Article
  • Open Access
4 Citations
2,171 Views
13 Pages

15 September 2023

The real-time evolution of the deformation and strain field of non-heat-treatable aluminum alloy 5754 and heat-treatable aluminum alloy 6061 resistance spot welding joints during the lap shear test was extracted using the digital image correlation (D...

(This article belongs to the Special Issue Advanced Metal Welding and Joining Technologies)
  • Article
  • Open Access
5 Citations
2,420 Views
16 Pages

15 November 2022

The characteristics of local strain distribution and evolution of duplex stainless steel during the tensile process were studied using the digital image correlation (DIC) technique. In addition, the finite element inversion of nanoindentation experim...

(This article belongs to the Special Issue Fatigue Behavior, Lifetime Prediction and Modeling of Welding Process)
  • Article
  • Open Access
1 Citations
1,026 Views
18 Pages

Spatiotemporal Evolution of the Failure Process of Sandstone Monitored Using Multi-Point Fiber Bragg Grating

  • Shi He,
  • Hongyan Li,
  • Weihua Wang,
  • Zhongxue Sun and ,
  • Yunlong Mo,
  • Shaogang Li,
  • Zhigang Deng,
  • Jinjiao Ye and
  • Qixian Li
  • + 4 authors+ 0 author

9 September 2025

Coal-rock dynamic disasters, especially rock bursts, require insight into the spatiotemporal evolution of strain and temperature to clarify failure mechanisms and improve early warning. This study aims to characterize the spatiotemporal evolution of...

  • Technical Note
  • Open Access
72 Citations
9,239 Views
9 Pages

Distributed Fiber Optic Sensors for the Monitoring of a Tunnel Crossing a Landslide

  • Aldo Minardo,
  • Ester Catalano,
  • Agnese Coscetta,
  • Giovanni Zeni and ,
  • Lei Zhang,
  • Caterina Di Maio,
  • Roberto Vassallo,
  • Roberto Coviello,
  • Giuseppe Macchia and
  • Luigi Zeni
  • + 6 authors+ 1 author

15 August 2018

This work reports on the application of a distributed fiber-optic strain sensor for long-term monitoring of a railway tunnel affected by an active earthflow. The sensor has been applied to detect the strain distribution along an optical fiber attache...

(This article belongs to the Special Issue New Frontiers of Multiscale Monitoring, Analysis and Modeling of Environmental Systems via Integration of Remote and Proximal Sensing Measurements)
  • Article
  • Open Access
29 Citations
4,156 Views
13 Pages

10 May 2018

To investigate the progressive failure process of coal, a series of uniaxial and triaxial compression tests were conducted and a novel 3D digital image correlation instrument with six cameras combined with a special transparent pressure cell was used...

(This article belongs to the Section L: Energy Sources)
  • Article
  • Open Access
9 Citations
4,350 Views
18 Pages

17 January 2025

To reveal the microstructural evolution and stress–strain distribution of 780 MPa-grade ferrite/martensite dual-phase steel during a uniaxial tensile deformation process, the plastic deformation behavior under uniaxial tension was studied using in si...

(This article belongs to the Special Issue Fracture and Fatigue in Metals and Alloys)
  • Article
  • Open Access
24 Citations
3,588 Views
22 Pages

25 February 2021

A large amount of experimental studies have shown significant dependence of strength of ductile metals on stress state and stress history. These effects have to be taken into account in constitutive models and corresponding numerical analysis to be a...

(This article belongs to the Section Computation and Simulation on Metals)
  • Article
  • Open Access
444 Views
29 Pages

Effects of Web Thickness and Flange Thickness on Flexural Crack Evolution and Ductility of H-Shaped UHPC Piles Based on DIC and Finite Element Analysis

  • Zhongling Zong,
  • Peiliang Qu,
  • Dashuai Zhang,
  • Qinghai Xie and ,
  • Xiaotian Feng,
  • Guoqing An and
  • Jinxin Meng
  • + 2 authors+ 0 author

19 April 2026

This study aims to reveal the control mechanism of key geometric parameters (flange thickness and flange edge thickness) of H-shaped cross-section on the bending performance of UHPC piles. Through conducting bending tests, combined with digital image...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
3 Citations
1,589 Views
19 Pages

10 September 2025

Laboratory triaxial tests are essential for studying sandy soil behavior but have limited ability to capture localized deformation and microstructural evolution. The discrete element method (DEM) overcomes these limitations by enabling particle-scale...

(This article belongs to the Section F: Engineering and Materials)
  • Article
  • Open Access
163 Views
29 Pages

22 October 2026

Deep coal–rock excavation under high stress may induce dynamic disasters. This study conducted real-time unloading tests on coal and sandstone using DIC and power-law singularity modeling. The results indicate that the evolution of strain rate...

(This article belongs to the Section Materials Processes)
  • Article
  • Open Access
12 Citations
6,205 Views
20 Pages

3 November 2020

The crystal plasticity finite element method, modeled on a realistic microstructure image, was developed to investigate the evolution of slip systems in grains of α/β titanium alloys during quasi-static tensile testing. By analyzing the da...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
2,530 Views
13 Pages

Understanding strain behavior near grain boundaries is critical for controlling structural distortions and oxygen vacancy migration in perovskite oxides. However, conventional techniques often lack the spatial resolution needed to analyze phase and d...

(This article belongs to the Collection Featured Articles for Surfaces)
  • Article
  • Open Access
10 Citations
2,619 Views
17 Pages

24 April 2025

In order to clarify the deformation mechanism of Inconel 718 (IN718) alloy at the grain scale during tensile deformation, the deformation behaviors of IN718 alloy were investigated at 650 °C using an in situ electron backscatter diffraction (EBSD...

(This article belongs to the Special Issue Mechanical Properties and Strengthening Mechanism of New Superalloys)
  • Article
  • Open Access
15 Citations
3,672 Views
13 Pages

20 June 2024

In this study, the digital image correlation (DIC) method and acoustic emission (AE) technology were combined to study the evolution of rock deformation localization in detail. The second-order spatial–temporal subset DIC (STS-DIC) algorithm wa...

  • Article
  • Open Access
269 Views
15 Pages

24 September 2026

Water-cooled nuclear reactors are equipped with internal structural elements made of grade 300 steels, which are subject to embrittlement over their operational lifetime. More specifically, typical internal components are simultaneously exposed to ne...

(This article belongs to the Special Issue Structural Materials for Harsh Environments)
  • Feature Paper
  • Article
  • Open Access
106 Citations
9,771 Views
34 Pages

Damage Mechanisms and Mechanical Properties of High-Strength Multiphase Steels

  • Sebastian Heibel,
  • Thomas Dettinger,
  • Winfried Nester,
  • Till Clausmeyer and
  • A. Erman Tekkaya

9 May 2018

The usage of high-strength steels for structural components and reinforcement parts is inevitable for modern car-body manufacture in reaching lightweight design as well as increasing passive safety. Depending on their microstructure these steels show...

  • Article
  • Open Access
615 Views
21 Pages

Detecting and Evaluating Fatigue Damage Mechanisms in Concrete with Embedded Aggregate Sensors

  • Ziwei Song,
  • Shoushan Cheng,
  • Haifang He,
  • Wanheng Li and
  • Yusheng Liu

18 March 2026

Fatigue damage is a critical factor for the long-term service performance degradation of concrete structures. Nevertheless, the mesoscopic fatigue process is still debatable due to material heterogeneity and the complex internal damage progression. T...

(This article belongs to the Special Issue Advances in Assessment and Health Monitoring of Construction Materials)
  • Review
  • Open Access
60 Citations
11,659 Views
48 Pages

7 December 2023

The current review work studies the adiabatic shear banding (ASB) mechanism in metals and alloys, focusing on its microstructural characteristics, dominant evolution mechanisms and final fracture. An ASB reflects a thermomechanical deformation instab...

(This article belongs to the Section Metal Failure Analysis)
  • Article
  • Open Access
10 Citations
3,528 Views
15 Pages

23 January 2022

The formation of the shear band is associated with the failure of soil. However, there has been relatively little investigation on the evolution of shear bands in naturally structured clay with a high sensitivity. In this study, undrained plane strai...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
129 Views
18 Pages

11 November 2026

Internal fractures in engineering rock masses generate intense local stress concentrations that trigger catastrophic instability. Understanding how structural symmetry governs stress redistribution and damage evolution is crucial for geotechnical sta...

(This article belongs to the Special Issue Symmetry/Asymmetry in Geotechnical Engineering)
  • Article
  • Open Access
6 Citations
3,331 Views
12 Pages

Evolution of Symmetrical Grain Boundaries under External Strain in Iron Investigated by Molecular Dynamics Method

  • Wenxue Ma,
  • Yibin Dong,
  • Miaosen Yu,
  • Ziqiang Wang and ,
  • Yong Liu,
  • Ning Gao,
  • Limin Dong and
  • Xuelin Wang
  • + 3 authors+ 0 author

30 August 2022

In the present work, the evolution of atomic structures and related changes in energy state, atomic displacement and free volume of symmetrical grain boundaries (GB) under the effects of external strain in body-centered cubic (bcc) iron are investiga...

(This article belongs to the Special Issue Numerical Modeling of Materials under Extreme Conditions)
  • Article
  • Open Access
1,356 Views
21 Pages

3 January 2026

This study presents a novel experimental methodology enabling the synchronous observation of strain and stress evolution in granular backfill subjected to active earth pressure. A physical model of plane deformation was used in which a rigid retainin...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
16 Citations
2,656 Views
12 Pages

11 August 2022

This study investigated the twinning behavior with increasing compressive strain in rolled AZ31 alloy. With that purpose, a polycrystalline structure with an average grain size of 30 μm was utilized to perform the uniaxial compression tests. Micro...

(This article belongs to the Section Metals and Alloys)
  • Communication
  • Open Access
3 Citations
1,766 Views
12 Pages

The Strain Heterogeneity and Microstructural Shear Bands in AZ31B Magnesium Alloy

  • Qinghui Zhang,
  • Xuhui Zhang,
  • Xiaojuan Yang and
  • Min Huang

4 February 2025

In this study, the strain distribution and microstructural evolution of the AZ31B magnesium alloy were analyzed via uniaxial tensile loading combined with an in situ tensile test. The results conclusively showed that the strain on the AZ31B magnesium...

(This article belongs to the Section Additive Manufacturing Technologies)
  • Article
  • Open Access
3 Citations
769 Views
15 Pages

13 March 2026

The low-frequency distributed acoustic sensing (LF-DAS) data acquired through fiber-optic cables cemented behind the fracturing well casing can dynamically capture the hydraulic fracturing process. After removing the thermal effect, the LF-DAS data c...

(This article belongs to the Special Issue Sensors and Sensing Techniques in Petroleum Engineering)
  • Article
  • Open Access
26 Citations
4,803 Views
18 Pages

Microstructural Changes and Strengthening of Austenitic Stainless Steels during Rolling at 473 K

  • Marina Odnobokova,
  • Andrey Belyakov,
  • Nariman Enikeev,
  • Rustam Kaibyshev and
  • Ruslan Z. Valiev

30 November 2020

The microstructural changes in 304L and 316L austenitic stainless steels during plate rolling with 95% rolling reduction at a temperature of 473 K and their effect on strengthening were studied. The microstructure evolution was associated with deform...

(This article belongs to the Section Structural Integrity of Metals)
  • Article
  • Open Access
297 Views
14 Pages

17 September 2026

In this work, a coupled Johnson-Cook (J-C) constitutive and damage modeling framework was established to investigate damage evolution during thread-rolling of TC16 titanium alloy. The J-C constitutive parameters were calibrated through tensile tests...

(This article belongs to the Section Metals and Alloys)

of 10