Orthogonal Time–Frequency Space (OTFS) is an innovative modulation method that ensures efficient and secure communication over a time-varying channel. This characteristic inspired us to integrate OTFS technology with underwater acoustic (UWA) c...
The satellite system is one of the most efficient means for broadcasting due to its wide service coverage as well as the fact that it can provide high data rate services by using high frequency bands. However, there are a number of problems in the sa...
An efficient iterative timing recovery via steepest descent of low-density parity-check (LDPC) decoding metrics is presented. In the proposed algorithm, a more accurate symbol timing synchronization is achieved at a low signal-to-noise (SNR) without...
The widespread development in wireless technologies and the advancements in multimedia communication have brought about a positive impact on the performance of wireless transceivers. We investigate the performance of our three-stage turbo detected sy...
Product codes (PCs) are widely used in high-speed communication systems due to their attractive trade-off between error-correction performance and complexity. To further meet the rapidly growing demand for higher data rates, soft-aided hard-decision...
An iterative QR-based soft feedback segment interference cancellation (QRSFSIC) detection and decoder algorithm for a Reed–Muller (RM) space-time turbo system is proposed in this paper. It forms the sufficient statistic for the minimum-mean-square er...
Polar coding and sparse code multiple access (SCMA) are key technologies for 5G mobile communication, the joint design of them has a great significance to improve the overall performance of the transmitter-receiver symmetric wireless communication sy...
This paper studies the hybrid flow shop scheduling problem with blocking constraints (BHFSP). To better understand the BHFSP, we will construct its mixed integer linear programming (MILP) model and use the Gurobi solver to demonstrate its correctness...
Low-density parity-check (LDPC) codes have the potential for applications in future high throughput optical communications due to their significant error correction capability and the parallel decoding. However, they are not able to satisfy the very...
In this paper, we address the permutation flow shop scheduling problem with sequence-dependent and non-anticipatory setup times. These setups are performed or supervised by multiple servers, which are renewable secondary resources (typically human re...
Sparse code multiple access (SCMA) has been a competitive multiple access candidate for future communication networks due to its superiority in spectrum efficiency and providing massive connectivity. However, cell edge users may suffer from great per...
This research presents a non-uniform track configuration in which the main track is twice as wide as its adjacent tracks, enabling high-quality soft information and enhancing adjacent-track detection via low-density parity-check (LDPC)-based turbo de...
In this article we present an iterative system of equalization and decoding to manage the intersymbol interference over an additive white Gaussian noise (AWGN) channel. Following the classic turbo equalization scheme, the proposed system consists of...
We propose a novel variant of the gradient descent bit-flipping (GDBF) algorithm for decoding low-density parity-check (LDPC) codes over the binary symmetric channel. The new bit-flipping rule is based on the reliability information passed from neigh...
In this paper, new schemes have been proposed for the estimation of the additive white Gaussian noise (AWGN) channel with intersymbol interference (ISI) in an iterative equalization and decoding system using low-density parity check (LDPC) codes. Thi...
In this paper, a non-binary low-density parity-check (NB-LDPC) coded high-order continuous phase modulation (CPM) system is designed and optimized to improve power and iterative efficiencies. Firstly, the minimum squared normalized Euclidean distance...
In this paper, we propose a finite alphabet iterative decoder (FAID) named rate-compatible mutual-information-maximizing quantized shuffled min-sum (RC-MIM-QSMS) decoder, for decoding quasi-cyclic low-density parity-check (QC-LDPC) codes with various...
This paper studies the secrecy coding analysis achieved by the self-jamming technique in the presence of an eavesdropper by considering a short-packet Full-Duplex (FD) transmission developed based on iterative blind or semi-blind channel estimation a...
In this paper, we introduce a novel gradient descent bit-flipping algorithm with a finite state machine (GDBF-wSM) for iterative decoding of low-density parity-check (LDPC) codes. The algorithm utilizes a finite state machine to update variable node...
The concept of labeling-based recipient identification (LABRID) for bit-interleaved coded modulation with iterative decoding (BICM-ID) is revisited. LABRID allows addressing a message recipient station in a wireless network by using an individual lab...
Satellite communications face difficulties such as intensified environmental attenuation, dynamic time-varying links, and diverse business scenarios, which usually require channel coding schemes with high coding gain and high throughput. Low-density...
Physical layer network coding (PNC) is a promising technique to improve the network throughput in a two-way relay (TWR) channel for two users to exchange messages across a wireless network. The PNC technique incorporating a TWR channel is embraced by...
This paper focuses on the Low-Density Algebra-Check (LDAC) code, a novel low-rate channel code derived from the Low-Density Parity-Check (LDPC) code with expanded algebra-check constraints. A method for optimizing LDAC code design using Extrinsic Inf...
In 2017, Polyanskiy showed that the trade-off between power and bandwidth efficiency for massive Gaussian random access is governed by two fundamentally different regimes: low power and high power. For both regimes, tight performance bounds were foun...
Labeling-Based Recipient Identification (LABRID) brings the possibility of representing the destination station address in a Bit-Interleaved Coded Modulation with Iterative Decoding (BICM-ID) system by a signal labeling rule. Low-order modulations, s...
This paper investigates the output synchronization of fractional-order cyber-physical systems (FOCPSs) under communication constraints. To address limited bandwidth and high transmission costs, an event-triggered encoding-decoding sampled-data iterat...
As the demands of multimedia and data services increase, efficient communication systems are being investigated to meet the high data rate requirements. Joint source-channel coding (JSCC) schemes were proposed for improving overall system performance...
In deep-space communications, conventional low-density parity check (LDPC) decoding algorithms suffer from slow convergence and high latency due to inefficient message scheduling. While residual-based layered belief propagation (RB-LBP) improves conv...
The polar code has become one of the most popular and important forward error correction (FEC) coding schemes due to its symmetric characteristics of channel polarization. This paper reviews various decoding schemes for polar codes and discusses thei...
In high-throughput applications, low-complexity and low-latency channel decoders are inevitable. Hence, for low-density parity-check (LDPC) codes, message passing decoding has to be implemented with coarse quantization—that is, the exchanged be...
In this paper, we propose a multi-dimensional sparse-coded ambient backscatter communication (MSC-AmBC) system for long-range and high-rate massive Internet of things (IoT) networks. We utilize the characteristics of the ambient sources employing ort...
Low-power ambient backscatter communication (AmBC) relying on radio-frequency (RF) energy harvesting is an energy-efficient solution for batteryless Internet of Things (IoT). However, ambient backscatter signals are severely faded by dyadic backscatt...
Because of the physical and engineering problems of conventional magnetic data storage systems, bit-patterned media recording (BPMR) is expected to be a promising technology for extending the storage density to beyond 1 Tb /in2. To increase the stora...
In this paper, we perform a belief propagation (BP) decoding threshold analysis of spatially coupled (SC) turbo-like codes (TCs) (SC-TCs) on the additive white Gaussian noise (AWGN) channel. We review Monte-Carlo density evolution (MC-DE) and efficie...
In this paper, a low-complexity decoder based on a neural network is proposed to decode binary quadratic residue (QR) codes. The proposed decoder is based on the neural min-sum algorithm and the modified random redundant decoder (mRRD) algorithm. Thi...
Low-density parity-check (LDPC) codes form part of the IRIG-106 standard and have been successfully deployed for the Telemetry Group version of shaped-offset quadrature phase shift keying (SOQPSK-TG) modulation. Recently, LDPC code solutions have bee...
This paper examines the iterative decoding of low-density parity check (LDPC) codes concatenated with continuous phase modulation (CPM). As relevant case studies, we focus on the family of three CPM waveforms that are embodied in the IRIG-106 aeronau...
In modern communication systems, the concatenation of a low-density parity-check (LDPC) code with a cyclic redundancy check (CRC) code is commonly used for error correction. In this paper, we propose a low-complexity two-stage scheme for decoding the...
Compared with orthogonal frequency division multiplexing (OFDM) systems, orthogonal time frequency space systems based on bi-orthogonal frequency division multiplexing (OTFS-BFDM) have lower out-of-band emission (OOBE) and better robustness to high-m...
To enhance the decoding efficiency of Globally Coupled (GC) LDPC codes, we incorporated Early Termination (ET) and Forced Convergence (FC) into the local/global two-phase decoding algorithm to expedite the decoding process. The two-phase decoding sch...
As high-speed big-data communications impose new requirements on storage latency, low-density parity-check (LDPC) codes have become a widely used technology in flash-memory channels. However, the iterative LDPC decoding algorithm faces a high decodin...
Early-termination techniques for a belief-propagation (BP) decoder of polar codes can improve the decoding throughput by finishing a decoding iteration when an early-termination condition is satisfied. In the BP decoders, the early-termination condit...
The Alternating Direction Method of Multipliers (ADMM) has proven to be an efficient approach for implementing linear programming (LP) decoding of low-density parity-check (LDPC) codes. By introducing penalty terms into the LP decoding model’s...
The parallel nature of the belief propagation (BP) decoding algorithm for polar codes opens up a real possibility of high throughput and low decoding latency during hardware implementation. To address the problem that the BP decoding algorithm introd...
With the escalating demand for high reliability, low power consumption, and high throughput baseband processing capabilities in 5G and future 6G communication systems, the channel coding and decoding IP core serves as a critical module in baseband ch...
Future wireless networks require channel coding schemes that can provide high reliability, low latency, and strong adaptability under finite-blocklength and structurally heterogeneous transmission scenarios. Globally coupled low-density parity-check...
An effective way of improving decoding performance of an LDPC code is to extend the single-decoder decoding method to a parallel decoding method with multiple sub-decoders. To this end, this paper proposes a parallel decoding method for the LDPC code...
The traditional LDPC encoding and decoding system is characterized by low throughput and high resource consumption, making it unsuitable for use in cost-efficient, energy-saving sensor networks. Aiming to optimize coding complexity and throughput, th...
In this letter, we study turbo product codes with quadratic residue codes (called QR-TPCs) as the component codes. We propose an efficient decoder based on Chase-II algorithm with two convergence conditions for the iterative decoding of QR-TPCs. For...
Multiple Frequency-Shift Keying (MFSK) has been used widely for underwater acoustic communications due to its low complexity and channel robustness. However, the traditional MFSK has the limitation of a low bit rate compared with coherent acoustic co...
of 6