Skip to Content

128 Results Found

  • Article
  • Open Access
601 Views
25 Pages

Study on Shear Performance of Interlayer Interfaces in 3D-Printed Concrete

  • Chang Sun,
  • Zonghao Wang,
  • Qiong Liu and
  • Amardeep Singh

This study investigates the interlayer shear performance of 3D-printed concrete (3DPC) using direct shear tests. Three nominal layer heights, 5 mm, 10 mm, and 15 mm, were considered, and specimens were loaded parallel to the printing path (x directio...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
2 Citations
1,363 Views
17 Pages

8 May 2026

The application of carbon-fiber-based geogrids in asphalt pavements is still in the nascent phase of research in China. Compared with glass fiber, carbon fiber undergoes processes such as electrochemical surface oxidation and coating with a sizing ag...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
19 Citations
5,984 Views
21 Pages

Shear-Torque Fatigue Performance of Geogrid-Reinforced Asphalt Interlayers

  • Davide Ragni,
  • Francesco Canestrari,
  • Fatima Allou,
  • Christophe Petit and
  • Anne Millien

27 May 2020

Interlayer reinforcement systems represent a valid solution to improve performance and extend the service life of asphalt pavements, reducing maintenance costs. The main issue is that the presence of reinforcement may hinder the full transmission of...

(This article belongs to the Special Issue Sustainable Pavement Engineering and Road Materials)
  • Article
  • Open Access
26 Citations
8,105 Views
19 Pages

Interlayer Bond Strength of 3D Printed Concrete Members with Ultra High Performance Concrete (UHPC) Mix

  • Yoon Jung Lee,
  • Sang-Hoon Lee,
  • Jae Hyun Kim,
  • Hoseong Jeong and ,
  • Sun-Jin Han and
  • Kang Su Kim
  • + 1 author+ 0 author

In structures manufactured using 3D concrete printing, cracks can easily propagate along the interface between printed layers. Therefore, it was necessary to determine the interlayer bond strength. In this study, direct shear and tensile tests were p...

(This article belongs to the Special Issue Advances in the 3D Printing of Concrete)
  • Article
  • Open Access
5 Citations
2,201 Views
18 Pages

7 February 2025

To address the insufficient interlayer bonding performance and high preparation costs associated with conventional prime coat materials for semi-rigid base asphalt pavement, in this study, we utilized waste bio-oil to enhance asphalt–aggregate...

(This article belongs to the Special Issue Novel Cleaner Materials for Pavements)
  • Article
  • Open Access
20 Citations
6,520 Views
18 Pages

16 August 2018

Compatible interlayers must be coated on reinforcing fibers to ensure effective stress transfer from the polymer matrix to the fiber in high-performance polymer composites. The mechanical properties of the interlayer, and its interfacial adhesion on...

(This article belongs to the Special Issue Glass Fibers 2018)
  • Article
  • Open Access
511 Views
24 Pages

Fatigue Performance and Pore Characteristics of SBS/Micro Carbon Fiber Composite-Modified Asphalt Concrete for Ultra-Thin Overlays

  • Xiaodong Yang,
  • Mingxin Liu,
  • Xiaojin Lu,
  • Jingyu Xiao and ,
  • Jifa Liu and
  • Quanman Zhao
  • + 1 author+ 0 author

25 August 2026

Durability deterioration and interlayer bonding failure of ultra-thin overlays remain critical challenges under coupled environmental and mechanical actions. Although environmental damage to asphalt mixtures has been widely investigated, the relation...

(This article belongs to the Special Issue Sustainable Polymer Materials for Pavement Applications)
  • Article
  • Open Access
1 Citations
1,354 Views
14 Pages

Loading Rate Influence on Delamination Behavior of Reinforced ENF Specimens by Additively Manufactured Interlayer

  • Mazaher Salamat-Talab,
  • Hossein Kazemi,
  • Alireza Akhavan-Safar and
  • Lucas F. M. da Silva

11 September 2025

Laminated composites have distinct mechanical properties that suit various industries. However, varying loading rates during their service life increase their vulnerability to one of their main weaknesses, delamination. Moreover, some interlayers tha...

(This article belongs to the Special Issue 3D Printing and Additive Manufacturing of Composites)
  • Article
  • Open Access
9 Citations
2,612 Views
15 Pages

Interlaminar Shear Characteristics of Typical Polyurethane Mixture Pavement

  • Guohua Gao,
  • Min Sun,
  • Chuanchang Xu,
  • Guangzhen Qu and
  • Yaohui Yang

13 September 2022

Polyurethane (PU) can be used as a road material binder, and its mechanical properties, durability, temperature stability, and other road performance metrics are good. However, the interlayer bonding between PU mixtures and asphalt mixtures is poor....

(This article belongs to the Special Issue Advances in Polymer-Reinforced and Fibre-Reinforced Concrete)
  • Article
  • Open Access
3 Citations
1,437 Views
24 Pages

22 August 2025

To reduce reflective cracking in asphalt pavements, gravel base layers are commonly employed to disperse stress and delay structural damage. However, the loose nature of gravel bases results in complex interlayer contact conditions, typically involvi...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
6 Citations
2,520 Views
14 Pages

Laser-Induced Exothermic Bonding of SiCp/Al Composites with Nanostructured Al/Ni Energetic Interlayer

  • Guangjie Feng,
  • Bingxu Hu,
  • Xiaojian Liu,
  • Yan Wei and ,
  • Zhuoran Li,
  • Peng He,
  • Zhiliang Cheng,
  • Yifeng Wang,
  • Dean Deng and
  • Xiuxia Yang
  • + 5 authors+ 0 author

3 July 2022

In this study, SiCp/Al composites were bonded using the laser-induced exothermic bonding method. The nanostructured Al/Ni energetic materials were prepared by the high-energy ball-milling method and served as the bonding interlayer. The joint microst...

(This article belongs to the Section Inorganic Crystalline Materials)
  • Article
  • Open Access
501 Views
20 Pages

Interfacial Characteristics of Ti/Steel Joints Welded by Resistance Spot Welding with Bi-Interlayer of Nb-Ni

  • Tong Wu,
  • Xiaowen Li,
  • Yaqiang Wang,
  • Nannan Wang and ,
  • Ranfeng Qiu and
  • Shengxiong Tang
  • + 1 author+ 0 author

11 June 2026

Resistance spot welding was performed to join 2 mm thick TA2 titanium plate and Q235 steel plate using an Nb-Ni bi-interlayer. The microstructure of the interfacial zone was observed and analyzed, and the tensile shear load of the joint was evaluated...

(This article belongs to the Special Issue Welding, Joining and Additive Manufacturing of Metals and Alloys (Fourth Edition))
  • Article
  • Open Access
16 Citations
5,364 Views
22 Pages

Effect of Material and Structure of Ultra-High-Molecular-Weight Polyethylene Body Armor on Ballistic Limit Velocity: Numerical Simulation

  • Jiang Bian,
  • Kaida Dai,
  • Xiaojiang Lv,
  • Zilu Huang and ,
  • Guangrun Wu and
  • Yuan Zhang
  • + 1 author+ 0 author

24 October 2024

The material properties and structural characteristics of ballistic composites are crucial to their ballistic performance. A numerical model of a 1.1 g FSP penetrating a UHMWPE target plate was established in this paper. The numerical results show th...

(This article belongs to the Section Polymer Physics and Theory)
  • Article
  • Open Access
5 Citations
1,163 Views
15 Pages

The Performance of Ti/Steel Joints Welded by Resistance Spot Welding with a Nickel Interlayer

  • Nannan Wang,
  • Gang Li,
  • Yanling Hu,
  • Hongxin Shi and ,
  • Ranfeng Qiu and
  • Keke Zhang
  • + 1 author+ 0 author

10 July 2025

Resistance spot welding was performed to join a 2 mm thick TA2 titanium plate and Q235 steel plate using nickel foil with thicknesses of 0.02 mm, 0.04 mm, and 0.06 mm as interlayers. The microstructure of the nugget zone and the interface region of t...

(This article belongs to the Special Issue Advanced Materials Joining and Manufacturing Techniques)
  • Article
  • Open Access
2 Citations
3,291 Views
17 Pages

Assessment on Bonding Potentials of Trackless Tack under a Thin Overlay

  • Ah Young Seo,
  • Maryam S. Sakhaeifar and
  • Bryan T. Wilson

Trackless tacks are used to minimize the loss of tack materials caused by adherence to moving tires. During the last two decades, the paving industry and highway agencies have had an increasing interest in the use of trackless tacks to ensure an adeq...

(This article belongs to the Section Sustainable Infrastructures)
  • Article
  • Open Access
5 Citations
2,670 Views
18 Pages

Particle Flow Simulation of the Strength and Failure Characteristics of a Layered Composite Rock-Like Sample with a Single Hole

  • Guozhu Wang,
  • Yu Wang,
  • Lei Song,
  • Hao Shi and ,
  • Mingwei Zhang,
  • Guotao Yuan,
  • Qiangguo Xu,
  • Guangda Xu,
  • Weiqian Zhang and
  • Jianjun Gao
  • + 5 authors+ 0 author

24 June 2021

Layered rock masses with holes are common in nature. Their mechanical behavior plays an important role in the safety and stability of engineering structures. However, previous studies have concentrated on a single lithological layer, and few studies...

  • Article
  • Open Access
5 Citations
2,018 Views
18 Pages

Microstructure and Shear Strength of SiC Ceramics Diffusion Bonded with Ti Foils by Spark Plasma Sintering

  • Weiqin Hu,
  • You Xie,
  • Xinru Xu,
  • Tengfei Yang and ,
  • Haocheng Liu,
  • Rui Tu and
  • Ruixuan Tan
  • + 2 authors+ 0 author

9 April 2025

This study systematically investigated the diffusion bonding of SiC ceramics using Ti interlayers via spark plasma sintering. The effects of holding time (5 min, 10 min, 20 min), joining temperature (1300 °C, 1400 °C, 1500 °C), and Ti foil thickness...

(This article belongs to the Special Issue Advanced Metallic and Ceramics Composites: Preparation, Properties and Applications)
  • Article
  • Open Access
17 Citations
5,821 Views
17 Pages

29 October 2021

This work aims to investigate the joining of Ti6Al4V alloy to alumina by diffusion bonding using titanium interlayers: thin films (1 µm) and commercial titanium foils (5 µm). The Ti thin films were deposited by magnetron sputtering onto alumina. The...

(This article belongs to the Section Welding and Joining)
  • Article
  • Open Access
18 Citations
6,362 Views
11 Pages

Joining Aluminium Alloy 5A06 to Stainless Steel 321 by Vaporizing Foil Actuators Welding with an Interlayer

  • Shan Su,
  • Shujun Chen,
  • Yu Mao,
  • Jun Xiao and ,
  • Anupam Vivek and
  • Glenn Daehn
  • + 1 author+ 0 author

5 January 2019

Direct aluminium–stainless steel joints are difficult to create by the vaporized foil actuator welding (VFAW) method because brittle intermetallic compounds (IMCs) tend to form along the interface. The use of an interlayer as a transition layer...

(This article belongs to the Special Issue Impact Welding of Materials)
  • Article
  • Open Access
10 Citations
2,454 Views
11 Pages

The Effect of the Cu Interlayer on the Interfacial Microstructure and Mechanical Properties of Al/Fe Bimetal by Compound Casting

  • Shiyuan Liu,
  • Hong Xu,
  • Baohong Zhang,
  • Guowei Zhang and ,
  • Long Bai,
  • Heqian Song,
  • Dan Zhang,
  • Chao Chang,
  • Huan Yu and
  • Chenglong Yang
  • + 5 authors+ 0 author

4 August 2023

Al/Fe bimetals prepared by a compound casting method, combining the excellent properties of both the Al alloy and the ductile cast iron, exhibit great potential for application in achieving engine weight reduction. However, the problem of insufficien...

  • Article
  • Open Access
11 Citations
3,511 Views
11 Pages

Interlayer Bonding Capability of Additively Manufactured Polymer Structures under High Strain Rate Tensile and Shear Loading

  • Patrick Striemann,
  • Lars Gerdes,
  • Daniel Huelsbusch,
  • Michael Niedermeier and
  • Frank Walther

15 April 2021

Additive manufacturing of polymers via material extrusion and its future applications are gaining interest. Supporting the evolution from prototype to serial applications, additional testing conditions are needed. The additively manufactured and anis...

(This article belongs to the Special Issue Extrusion Based Additive Manufacturing)
  • Article
  • Open Access
466 Views
14 Pages

10 July 2026

To investigate the reinforcement law and internal mechanism of fiber seals on the interlayer bonding performance of asphalt pavement, the SMA-13/AC-20 pavement structure was taken as the object to reveal the effects of fiber type (basalt fiber and gl...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
9 Citations
4,633 Views
15 Pages

24 January 2019

To enhance the mechanical strength of an ultrasonic spot-welded Al/Al joint, an Al 2219 particle interlayer was placed between the two Al sheets during the ultrasonic spot welding process. The effects of the interlayer thickness on the microstructure...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
951 Views
18 Pages

27 October 2025

Diffusion bonding (DB) of aluminum alloys faces significant technical challenges, requiring thorough surface preparation and precise control of process parameters. To enhance the joint quality of 7B04 aluminum alloy sheets, pure aluminum (Al) and 707...

(This article belongs to the Section Metals and Alloys)
  • Review
  • Open Access
17 Citations
6,724 Views
24 Pages

Review: Shear Properties and Various Mechanical Tests in the Interface Zone of Asphalt Layers

  • Hatim M. Akraym,
  • Ratnasamy Muniandy,
  • Fauzan Mohd Jakarni and
  • Salihudin Hassim

Over four decades, researchers have extensively focused on bonding flexible pavement layers. Scholars have concentrated on the partial or complete lack of interlayer bonding between asphalt layers, which is the primary cause of premature pavement fai...

(This article belongs to the Special Issue Geomaterials for Transportation Infrastructures)
  • Article
  • Open Access
14 Citations
2,527 Views
14 Pages

22 August 2023

Due to their exceptional all-around performance, steel/aluminum-alloy composite plates have been frequently utilized in many different industries. However, when steel/aluminum-alloy composite plates are prepared by the rolling process, they will scar...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
6 Citations
4,645 Views
13 Pages

2 January 2023

To enhance the performance of Babbitt–steel bimetallic composites, bismuth (Bi) was incorporated into the Tin (Sn)-interlayer. Babbitt–steel bimetallic composites were created using the liquid–solid compound casting method in this s...

(This article belongs to the Special Issue Green Sustainable Process for Chemical and Environmental Engineering and Science)
  • Article
  • Open Access
1,724 Views
20 Pages

Dynamic Characteristics Analysis of Three-Layer Steel–Concrete Composite Beams

  • Longbiao Yan,
  • Long Cao,
  • Yikuan He,
  • Xu Han and ,
  • Mingsheng Cao,
  • Bingchuan Yan,
  • Yachen You and
  • Benyuan Li
  • + 3 authors+ 0 author

17 April 2025

The dynamic behavior of three-layer composite beams, consisting of concrete slabs and steel beams, is influenced by the structural configuration of each layer as well as the shear connectors. The interlayer shear stiffness in three-layer composite be...

(This article belongs to the Special Issue Advances in Steel and Composite Structures)
  • Article
  • Open Access
710 Views
18 Pages

12 March 2026

Three-dimensional printing (3DP) has gained increasing attention in construction as a means of addressing labor shortages and improving efficiency. Various studies have investigated fiber-reinforced mortars for 3DP. However, only a few studies have e...

(This article belongs to the Special Issue Cement-Based Materials and Construction Materials: Modeling, Characterization, and Mechanical Behavior (Second Edition))
  • Article
  • Open Access
1 Citations
1,186 Views
18 Pages

7 July 2025

Titanium alloy/carbon fiber-reinforced polymer (TA1/CFRP) laminates, representing the latest fourth generation of fiber metal laminates (FMLs), is a kind of high-performance composite material. However, the fragility of the fiber/resin and metal/resi...

  • Article
  • Open Access
6 Citations
8,206 Views
22 Pages

18 October 2022

Most used laminated glass is composed of float glass plies bonded together with a viscoelastic Polyvinyl Butyral (PVB) interlayer. The shear stiffness of the polymeric interlayer is the key factor in the behavior of laminated glass. Structural engine...

(This article belongs to the Section Polymer Analysis and Characterization)
  • Article
  • Open Access
265 Views
21 Pages

An Experimental Study on the Effects of Electrospun Nanofiber Interleaves on Impact Damage Response and Compression-After-Impact of CFRP Laminates

  • Christian Brauner,
  • Matthias Schär,
  • Ata Yoosefinejad,
  • Naresh Sanandiya and ,
  • Hamed Heravi,
  • Peyman Adl,
  • Frederick Tischhauser,
  • Edgars Eglitis and
  • Mohammad Hajikazemi
  • + 4 authors+ 0 author

26 October 2026

Electrospun thermoplastic nanofiber interleaving has recently been shown to significantly enhance the Mode I and Mode II interlaminar fracture toughness of carbon fiber-reinforced polymer (CFRP) laminates. This exploratory experimental study extends...

(This article belongs to the Special Issue Advances in Fiber-Reinforced Composite Structures: From Design to Applications)
  • Article
  • Open Access
2 Citations
1,744 Views
12 Pages

11 September 2024

Due to its super plasticity, low weight, and high mechanical resistance properties, generally, Ti6Al4V is used for aeronautical applications. However, it has low resistance to plastic shearing. In addition, it has poor wear resistance. For these reas...

(This article belongs to the Special Issue Mechanical and Metallurgical Behaviour of Welded Materials)
  • Article
  • Open Access
5 Citations
1,681 Views
15 Pages

18 August 2025

The interlayer bonding strength between a cement-stabilized macadam (CSM) base and an asphalt surface layer significantly influences asphalt pavement performance. This study analyzes the calculation method for the interlayer bonding coefficient, inve...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
20 Citations
3,377 Views
21 Pages

Study on Fatigue Characteristics and Interlayer Design Method of Waterproof Cohesive Bridge Deck Layer

  • Naren Fang,
  • Xuancang Wang,
  • Hongyu Ye,
  • Yaoning Sun and ,
  • Ziyuan Su and
  • Lun Yuan
  • + 1 author+ 0 author

21 May 2019

Shear fatigue damage to the waterproof cohesive layer has not received enough attention in bridge deck pavement design. Meanwhile, there is less theoretical basis for the design of a waterproof cohesive layer. In this study, direct shear and shear fa...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
10 Citations
3,025 Views
20 Pages

26 August 2022

In order to provide a good solution for the treatment and utilization of construction waste, especially waste concrete and to promote the development of green construction to some extent, in this paper, a new composite shear wall filled with demolish...

(This article belongs to the Special Issue Resilience-Based Structural Seismic Design and Evaluation)
  • Article
  • Open Access
2 Citations
577 Views
22 Pages

22 July 2026

Interfacial bond failure is a common form of distress in rigid–flexible composite pavements, especially in tunnel environments with harsh service conditions. Epoxy-emulsified asphalt (EEA) is widely used as a high-performance interlayer bond co...

(This article belongs to the Special Issue Advanced Coating Barriers for the Protection of Reinforced Concrete and Pavement, 3rd Edition)
  • Article
  • Open Access
233 Views
21 Pages

Effects of Bolt-Tightening Torque and Rubber Interlayer Thickness on the Slip Resistance of Nylon Coupler–GFRP Circular-Tube Joints

  • Lu Cui,
  • Huibo Du,
  • Taili Zhu,
  • Jiayu Chen and ,
  • Zongjian Hu and
  • Ruoqiang Feng
  • + 1 author+ 0 author

13 October 2026

To characterize the slip-resistant behavior of nylon-coupler joints in prefabricated GFRP circular-tube crossing frames, a two-factor experimental investigation was conducted considering bolt-tightening torque and rubber interlayer thickness. Four in...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
1 Citations
1,080 Views
21 Pages

Analysis of Dynamic Response Characteristics and Failure Pattern of Rock Slopes Containing X-Joints and Underlying Weak Interlayers

  • He Meng,
  • Yanjun Shang,
  • Liyun Zhou,
  • Yangfan Li and ,
  • Xuetao Yi and
  • Qingsen Meng
  • + 1 author+ 0 author

19 September 2025

Under the complex geological structural stress of the Western Himalayan syntaxis, the widespread distribution of hard and brittle rocks (such as sandstone and limestone) makes them prone to the formation of conjugate joints, also known as X-joints. T...

  • Article
  • Open Access
10 Citations
2,378 Views
24 Pages

25 April 2024

Reflection cracks are one of the most common problems in semi-rigid base pavement. Setting a stress absorption layer can effectively delay the occurrence of reflection cracks, but further improvement is still needed in its interlayer bonding performa...

(This article belongs to the Special Issue Mechanical Property Research of Advanced Asphalt-Based Materials)
  • Article
  • Open Access
13 Citations
3,657 Views
19 Pages

25 August 2021

Steel-concrete composite (SCC) beams are widely employed in bridge decks. The interfacial shear transfer between the top concrete slab and the supporting steel beams significantly affects the overall load carrying capacity and performance of a bridge...

(This article belongs to the Special Issue Bridge Monitoring Using Remote Sensors)
  • Systematic Review
  • Open Access
4 Citations
1,506 Views
16 Pages

22 December 2025

Background/Objectives: Chipping of the veneering part of the crown at the zirconia–porcelain interface remains a major complication of bilayered zirconia systems. This systematic review evaluated whether incorporating a lithium-disilicate (LD)...

  • Article
  • Open Access
11 Citations
4,188 Views
25 Pages

2 May 2022

The joining of composites can be performed in an extremely short time with more energy-efficient ultrasonic welding techniques. The current research investigated the performance optimization of ultrasonic welding of carbon/Elium® composite to car...

(This article belongs to the Collection State-of-the-Art Polymer Science and Technology in Singapore)
  • Article
  • Open Access
10 Citations
3,424 Views
14 Pages

Long-Term Performance Analysis of Epoxy Resin Ultra-Thin Wearing Course Overlay on Cement Concrete Pavement

  • Xiaoguang Zheng,
  • Yajie Chen,
  • Wanwan Xu,
  • Zhen Zhang and ,
  • Guoqiang Sun and
  • Tao Wang
  • + 1 author+ 0 author

18 August 2023

The overall rigidity of the cement concrete pavement is high, but there are defects such as easy cracking and insufficient anti-slip performance. The epoxy resin ultra-thin wearing course overlay can effectively solve these issues. However, there is...

(This article belongs to the Special Issue Green Asphalt Materials—Surface Engineering and Applications)
  • Review
  • Open Access
11 Citations
2,905 Views
52 Pages

28 January 2026

Fiber-reinforced polymer (FRP) composites are increasingly used in civil, marine, offshore, and energy infrastructure, where components routinely experience temperatures above ambient conditions. While the design of these components is largely driven...

(This article belongs to the Special Issue Advanced Polymer Composites and Foams)
  • Article
  • Open Access
3 Citations
1,327 Views
15 Pages

Experimental Study on the Interfacial Shear Behavior Between ECC and Foamed Concrete

  • Runtao Li,
  • Zude Ding,
  • Shunguo Wang,
  • Juan Huang and
  • Caipeng Zhu

In tunnel structures that traverse active fault zones, a vibration isolation layer is often installed between the primary support and the secondary lining. As a result, a three-layer flexible support structure composed of the initial support, damping...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
6 Citations
2,974 Views
26 Pages

13 August 2025

Icing represents a significant hazard to the flight safety of unmanned aerial vehicles (UAVs), particularly affecting critical aerodynamic surfaces such as air intakes, wings, and empennages. While conventional adhesive electrothermal de-icing system...

(This article belongs to the Special Issue Deicing and Anti-Icing of Aircraft (Volume IV))
  • Article
  • Open Access
20 Citations
8,677 Views
15 Pages

10 August 2017

In order to quantitatively evaluate the shear-bearing capacity of shear connectors of square concrete filled steel tube (CFST), push-out tests on 14 square CFSTs with shear connectors have been carried out. Among the 14 CFSTs, there are 13 specimens...

  • Article
  • Open Access
5 Citations
1,864 Views
17 Pages

Effect of Bead Geometry and Layer Time on Microstructure and Thermomechanical Properties of Large-Format Polymer Composites

  • Tyler M. Corum,
  • Johnna C. O’Connell,
  • Samuel Pankratz,
  • Maximilian Heres and ,
  • Jeff Foote and
  • Chad E. Duty
  • + 1 author+ 0 author

1 January 2026

Large-format additive manufacturing (LFAM) is a manufacturing process in which high volumes of material are extruded in a layer-by-layer fashion to create large structures with often complex geometries. The Loci-One system, operated and developed by...

(This article belongs to the Special Issue Additive Manufacturing of Polymer Based Materials)
  • Article
  • Open Access
598 Views
29 Pages

Shear Lag Effect Analysis of GFRP Composite Truss Web Girder Bridge

  • Dongyan Xue,
  • Rui Chu,
  • Zhifeng Yuan and
  • Zheng Xiao

25 February 2026

To clarify the shear lag effect and flexural performance of glass fiber-reinforced polymer (GFRP) composite truss web girder bridges and verify the feasibility of substituting steel truss webs with GFRP members, a refined finite element (FE) model wa...

(This article belongs to the Section Building Materials, and Repair & Renovation)

of 3