Skip to Content

44 Results Found

  • Article
  • Open Access
2 Citations
1,487 Views
17 Pages

23 May 2025

Interface debonding between high-strength grouting materials and the inner surfaces of steel tubes in grouting jacket connections (GJCs), which have been widely employed in offshore wind turbine support structures, negatively affects their mechanical...

(This article belongs to the Special Issue Sensor-Based Structural Health Monitoring of Civil Infrastructure)
  • Article
  • Open Access
35 Citations
4,891 Views
14 Pages

24 July 2019

Concrete-filled steel tube (CFST) members have been widely employed as major structural members carrying axial or vertical loads and the interface bond condition between steel tube and concrete core plays key roles in ensuring the confinement effect...

(This article belongs to the Special Issue Advances in Ultrasonic Guided Wave Sensor Technologies for Structural Health Monitoring)
  • Article
  • Open Access
1 Citations
1,342 Views
20 Pages

15 May 2025

Interface debonding between the steel tube and grouting materials in grouting jacket connections (GJCs) of offshore wind turbine supporting structures leads to negative effects on the load-carrying capacity and safety concerns. In this paper, an inte...

(This article belongs to the Special Issue Sensor-Based Structural Health Monitoring of Civil Infrastructure)
  • Article
  • Open Access
11 Citations
1,700 Views
19 Pages

27 June 2024

Interface bonding conditions between concrete and steel materials play key roles in ensuring the composite effect and load-carrying capacity of concrete–steel composite structures such as concrete-filled steel tube (CFST) members in practice. A...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
16 Citations
4,343 Views
22 Pages

26 October 2021

Multi-channel Impact-echo (IE) testing was used to evaluate debonding defects at the interface between track concrete layer, TCL, and hydraulically stabilized base course, HSB, in a real scale mockup model of concrete slab tracks for Korea high-speed...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
22 Citations
3,683 Views
19 Pages

28 January 2022

In recent years, the development of interface debonding defect detection methods for concrete-filled steel tubes (CFSTs) using stress wave measurement with piezoelectric-lead-zirconate-titanate (PZT) actuator and sensor has received significant atten...

(This article belongs to the Section Communications)
  • Article
  • Open Access
36 Citations
5,405 Views
20 Pages

Interfacial Debonding Detection for Rectangular CFST Using the MASW Method and Its Physical Mechanism Analysis at the Meso-Level

  • Hongbing Chen,
  • Bin Xu,
  • Jiang Wang,
  • Lele Luan and ,
  • Tianmin Zhou,
  • Xin Nie and
  • Yi-Lung Mo
  • + 2 authors+ 0 author

20 June 2019

In this study, the transient multichannel analysis of surface waves (MASW) is proposed to detect the existence, the location and the length of interface debonding defects in rectangular concrete-filled steel tubes (CFST). Mesoscale numerical analysis...

(This article belongs to the Special Issue Smart Sensors and Smart Structures)
  • Article
  • Open Access
9 Citations
1,986 Views
13 Pages

Inspection of Liner Wall Thinning and Interface Debonding in Bimetallic Lined Pipes Using Pulsed Eddy Current Testing

  • Weifan Chen,
  • Xiaofeng Zhou,
  • Baixi Liu,
  • Zhiping Li and ,
  • Zan Luo and
  • Zhiyuan Xu
  • + 1 author+ 0 author

30 May 2024

Bimetallic lined pipe (BLP) has been increasingly used in offshore and subsea oil and gas structures, but how to identify the invisible inner defects such as liner wall thinning and interface debonding is a challenge for future development. A nondest...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
40 Citations
8,366 Views
17 Pages

Evaluation of Bonding Quality with Advanced Nondestructive Testing (NDT) and Data Fusion

  • Bengisu Yilmaz,
  • Abdoulaye Ba,
  • Elena Jasiuniene,
  • Huu-Kien Bui and
  • Gérard Berthiau

8 September 2020

This work aims to compare quantitatively different nondestructive testing (NDT) techniques and data fusion features for the evaluation of adhesive bonding quality. Adhesively bonded composite-epoxy single-lap joints have been investigated with advanc...

(This article belongs to the Special Issue Sensors Applied to Nondestructive Testing and Structural Health Monitoring)
  • Article
  • Open Access
11 Citations
3,643 Views
18 Pages

Investigations on the Mechanical Properties of Composite T-Joints with Defects under Bending Loading

  • Geng Luo,
  • Chengpeng Chai,
  • Junzhe Liu,
  • Yaozhi Xiao and ,
  • Yisong Chen and
  • Fengxiang Xu
  • + 1 author+ 0 author

12 December 2022

The composite T-joint, a typical structural element, is widely used in the fields of aerospace due to their excellent mechanical properties. However, several defects might occur in this material during manufacturing because of the application of co-c...

(This article belongs to the Section Sustainable Engineering and Science)
  • Article
  • Open Access
9 Citations
3,398 Views
18 Pages

28 August 2024

Carbon fiber-reinforced polymers (CFRPs) are widely used in the fabrication of solid rocket motor casings due to their exceptional performance. However, the bonding interface between CFRP and viscoelastic materials (rubber) is prone to debonding dama...

(This article belongs to the Section Fault Diagnosis & Sensors)
  • Article
  • Open Access
10 Citations
2,974 Views
15 Pages

Numerical Study on the Progressive Damage Behavior of the Interfacial Debonding between Shape Memory Alloy and Polymer Matrix

  • Hao Li,
  • Cong Jiang,
  • Zhaogang Yu,
  • Yun Wan and ,
  • Yunsheng Ma and
  • Zhaoyang Yang
  • + 1 author+ 0 author

24 December 2022

The shape memory alloy reinforced composites have promising application potential for aerospace, automotive and biomedical engineering, while the interfacial bonding performance between shape memory alloy and polymer matrix is crucial to the improvem...

(This article belongs to the Special Issue Design, Characterization and Novel Applications of Shape Memory Alloys)
  • Article
  • Open Access
263 Views
32 Pages

19 October 2026

A void between the concrete lining and surrounding rock interrupts the continuous support of lined rock caverns (LRCs) for compressed air energy storage (CAES). However, the load redistribution within the multilayer structure and the associated local...

(This article belongs to the Section D: Energy Storage and Application)
  • Article
  • Open Access
3 Citations
3,157 Views
16 Pages

Enhancing Defect Detection on Surfaces Using Transfer Learning and Acoustic Non-Destructive Testing

  • Michele Lo Giudice,
  • Francesca Mariani,
  • Giosuè Caliano and
  • Alessandro Salvini

20 June 2025

Debonding, especially in plastic materials, refers to the separation occurring at the interface within a bonded structure composed of two or more polymeric layers. Due to the great heterogeneity of materials and layering configurations, highly specia...

(This article belongs to the Special Issue Machine Learning and Artificial Intelligence with Applications)
  • Article
  • Open Access
38 Citations
6,938 Views
14 Pages

28 November 2018

Reinforced concrete is of vital importance in many civil and industrial structural applications. The effective bonding between steel and concrete is the core guarantee of the safe operation of the structures. Corrosion or other interface debonding in...

(This article belongs to the Special Issue Smart Sensors and Smart Structures)
  • Article
  • Open Access
6 Citations
3,558 Views
21 Pages

20 November 2023

The extended finite element method (XFEM) was employed for the computational modeling of internal defects within a bond layer. Furthermore, a cohesive zone model (CZM) was implemented to characterize the behavior of the bond layer in response to inte...

  • Article
  • Open Access
45 Citations
5,445 Views
20 Pages

Sensor Fault Diagnosis for Impedance Monitoring Using a Piezoelectric-Based Smart Interface Technique

  • Thanh-Canh Huynh,
  • The-Duong Nguyen,
  • Duc-Duy Ho,
  • Ngoc-Loi Dang and
  • Jeong-Tae Kim

16 January 2020

For a structural health monitoring (SHM) system, the operational functionality of sensors is critical for successful implementation of a damage identification process. This study presents experimental and analytical investigations on sensor fault dia...

(This article belongs to the Special Issue Damage Detection of Structures Based on Piezoelectric Sensors)
  • Article
  • Open Access
10 Citations
1,987 Views
13 Pages

Analysis of Interfacial Adhesion Properties Between PBT Azide Propellant Matrix and Defective AP Fillers Using Molecular Dynamics Simulations

  • Xianzhen Jia,
  • Linjing Tang,
  • Ruipeng Liu,
  • Hongjun Liao and ,
  • Liang Cao,
  • Xianqiong Tang and
  • Peng Cao
  • + 2 authors+ 0 author

15 December 2024

Filler defects and matrix crosslinking degree are the main factors affecting the interfacial adhesion properties of propellants. Improving adhesion can significantly enhance debonding resistance. In this study, all-atom molecular dynamics (MD) simula...

(This article belongs to the Section Polymer Physics and Theory)
  • Article
  • Open Access
5 Citations
2,247 Views
20 Pages

15 April 2023

In order to efficiently investigate the effect of the mesoscale heterogeneity of a concrete core and the randomness of circular coarse aggregate distribution on the stress wave propagation procedure and the response of PZT sensors in traditional coup...

(This article belongs to the Special Issue Multiscale and Multiphysics Modeling of Heterogeneous Materials and Structures)
  • Review
  • Open Access
17 Citations
6,712 Views
24 Pages

Review: Shear Properties and Various Mechanical Tests in the Interface Zone of Asphalt Layers

  • Hatim M. Akraym,
  • Ratnasamy Muniandy,
  • Fauzan Mohd Jakarni and
  • Salihudin Hassim

Over four decades, researchers have extensively focused on bonding flexible pavement layers. Scholars have concentrated on the partial or complete lack of interlayer bonding between asphalt layers, which is the primary cause of premature pavement fai...

(This article belongs to the Special Issue Geomaterials for Transportation Infrastructures)
  • Article
  • Open Access
4 Citations
3,469 Views
29 Pages

Experimental and Numerical Investigation of the Shear Performance of PSCC Shear Connectors with Poured UHPC

  • Fengli Zhou,
  • Chunwu Guo,
  • Jiangtao Zhang,
  • Jincen Guo and ,
  • Jinlong Jiang and
  • Lulin Ning
  • + 1 author+ 0 author

12 January 2023

Assembled steel-composite bridges generally use stud connectors to achieve the connection between the deck slab and the steel main girders. However, the commonly-used cluster studs weaken the integrity of the precast deck slabs and are not conducive...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Review
  • Open Access
468 Views
31 Pages

Wellbore integrity is central to geological CO2 storage because wells can intersect formations intended to contain injected CO2 and displaced brine. This critical narrative review examines how defects at casing–cement and cement–formation...

  • Article
  • Open Access
22 Citations
4,201 Views
25 Pages

Lamb Wave Scattering Analysis for Interface Damage Detection between a Surface-Mounted Block and Elastic Plate

  • Mikhail V. Golub,
  • Alisa N. Shpak,
  • Inka Mueller,
  • Sergey I. Fomenko and
  • Claus-Peter Fritzen

28 January 2021

Since stringers are often applied in engineering constructions to improve thin-walled structures’ strength, methods for damage detection at the joints between the stringer and the thin-walled structure are necessary. A 2D mathematical model was...

(This article belongs to the Special Issue Smart Sensors for Damage Detection)
  • Article
  • Open Access
8 Citations
2,657 Views
20 Pages

13 April 2024

Concrete-filled steel tube (CFST) members have been widely used in civil engineering due to their advanced mechanical properties. However, internal defects such as the concrete core voids and interface debonding in CFST structures are likely to weake...

(This article belongs to the Special Issue Fault Detection, Diagnosis and Maintenance on Intelligent Transportation System)
  • Article
  • Open Access
25 Citations
8,354 Views
14 Pages

24 March 2019

Thermal bonding technology is the most commonly used approach in bonding injection-molded microfluidic chips. Although the bonding mechanism is still under debate, the molecular dynamics (MD) method can provide insight into the bonding process on a m...

(This article belongs to the Special Issue Processing and Molding of Polymers)
  • Article
  • Open Access
89 Citations
5,978 Views
11 Pages

7 December 2016

Concrete-filled fiber-reinforced polymer tubes (CFFTs) have attracted interest for their structural applications in corrosive environments. However, a weak interfacial strength between the fiber-reinforced polymer (FRP) tube and the concrete infill m...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
1 Citations
715 Views
21 Pages

Simulation Study on Piezoelectric Detection Performance of Sensors Based on PMN-PT for Interface Damage of CFRP–Steel Plates

  • Tianhe Zhang,
  • Lele He,
  • Xu Wang,
  • Youjia Zhang and ,
  • Shuqin Zheng and
  • Bin Fu
  • + 1 author+ 0 author

The reliable evaluation of the interfacial bonding quality of steel structures strengthened with carbon fiber-reinforced polymer (CFRP) is crucial to ensuring the long-term service safety of the structures. Focusing on the active and passive detectio...

(This article belongs to the Section Building Structures)
  • Review
  • Open Access
771 Views
68 Pages

Electro-Chemo-Mechanical Coupling in All-Solid-State Lithium Metal Batteries: From Stress Generation to Failure Mitigation

  • Qichanghao Li,
  • Ying Li,
  • Zihao Wang,
  • Kyu-Young Park and ,
  • Simon Fleischmann,
  • Hidemi Kato and
  • Eric Jianfeng Cheng
  • + 2 authors+ 0 author

3 October 2026

All-solid-state lithium metal batteries (ASSLMBs) promise enhanced safety and high energy density, yet their solid–solid interfaces create mechanical constraints absent from conventional liquid-electrolyte cells. Electrochemical reactions, ion...

(This article belongs to the Special Issue Integrated Approaches to Solid Electrolyte Development: Synthesis, Mechanics, and Data-Driven Frameworks)
  • Article
  • Open Access
1,896 Views
19 Pages

Interfacial Failure in Flexible Pipe End Fittings: DIC and Cohesive Zone Modeling for Defect Analysis

  • Tao Zhang,
  • Qingzhen Lu,
  • Shengjie Xu,
  • Yuanchao Yin and ,
  • Jun Yan and
  • Qianjin Yue
  • + 1 author+ 0 author

Flexible pipe end fittings (EFs) transfer axial loads by embedding tensile armor within epoxy matrices. The integrity of bonding between the armor and resin profoundly influences the EF load-bearing capacity. This study investigated the debonding fai...

(This article belongs to the Section Ocean Engineering)
  • Article
  • Open Access
4 Citations
2,736 Views
17 Pages

Simulation and Experimental Analysis of Surface Defects in Turning of TiCp/TC4 Composites

  • Haixiang Huan,
  • Chilei Zhu,
  • Biao Zhao,
  • Wenqiang Xu and
  • Ke Zhang

27 December 2022

Processing TiCp/TC4 composites has always been difficult due to the mismatch between the mechanical and thermal properties of the matrix and the reinforced particles, which results in a variety of machined surface defects. To expose the mechanism of...

(This article belongs to the Special Issue Micro- and Nanoscale Science, Technology and Engineering in Nanjing University of Aeronautics and Astronautics: Celebrating 70th Anniversary)
  • Feature Paper
  • Article
  • Open Access
6 Citations
4,309 Views
15 Pages

Nonlinearities Associated with Impaired Sensors in a Typical SHM Experimental Set-Up

  • Stefano Carrino,
  • Francesco Nicassio and
  • Gennaro Scarselli

Structural Health Monitoring (SHM) gives a diagnosis of a structure assessing the structural integrity and predicting the residual life through appropriate data processing and interpretation. A structure must remain in the design domain, although it...

(This article belongs to the Special Issue Sensing and Signal Processing in Smart Healthcare)
  • Article
  • Open Access
1 Citations
1,825 Views
12 Pages

Response of a Blood Clot Adherent to Bone, Oral Mucosa and Hard Dental Tissues to a Uniaxial Tensile Test: An In Vitro Study

  • Gaia Pellegrini,
  • Roberto Fedele,
  • Daniela Carmagnola,
  • Claudia Dellavia and ,
  • Giorgio Pagni,
  • Dolaji Henin,
  • Gianguido Cossellu,
  • Sabrine Fessi and
  • Giulio Rasperini
  • + 4 authors+ 0 author

12 October 2024

Background and Objectives: Periodontal therapy aims to arrest the progression of periodontal diseases and possibly to regenerate the periodontal apparatus. To shift healing from repair to regeneration, the blood clot that fills the periodontal defect...

(This article belongs to the Section Dentistry and Oral Health)
  • Article
  • Open Access
7 Citations
3,557 Views
14 Pages

25 October 2021

The surface roughness (Ra) and composite interfacial property of carbon fiber (CF) are considered to be mainly affected by the microstructure of the CF surface. However, quantitative characterization of the CF surface microstructure is always a diffi...

(This article belongs to the Section Advanced Composites)
  • Review
  • Open Access
  • Best Paper Award
155 Citations
26,189 Views
29 Pages

19 April 2022

A review of the root causes and mechanisms of damage and failure to wind turbine blades is presented in this paper. In particular, the mechanisms of leading edge erosion, adhesive joint degradation, trailing edge failure, buckling and blade collapse...

(This article belongs to the Special Issue Materials in Energy Technology)
  • Feature Paper
  • Article
  • Open Access
31 Citations
7,291 Views
17 Pages

7 January 2019

The cohesive zone model (CZM) has found wide acceptance as a tool for the simulation of delamination in composites and debonding in bonded joints and various implementations of the cohesive zone model dedicated to fatigue problems have been proposed...

(This article belongs to the Special Issue Carbon Fibre Reinforced Plastics)
  • Article
  • Open Access
1 Citations
615 Views
24 Pages

Feasibility of Full-Range Replacement of Natural Coarse Aggregates with Recycled Foam Concrete Aggregate: Effects on Rheology, Mechanical Degradation, and Shear Resistance

  • Huan Liu,
  • Xiaoyuan Fan,
  • Alipujiang Jierula,
  • Tian Tan and ,
  • Yuhao Zhou and
  • Nuerlanbaike Abudujiapaer
  • + 1 author+ 0 author

17 April 2026

The urgent global need for sustainable infrastructure drives the demand for high-value buildings and waste removal. This paper studies the feasibility of using recycled foam concrete aggregate (FCA) as a substitute for natural coarse aggregate (NCA)...

(This article belongs to the Special Issue Multi-Scale Study on Strength and Structural Stability of Low-Carbon Construction Materials)
  • Review
  • Open Access
1,006 Views
38 Pages

9 September 2026

Externally bonded fiber-reinforced polymer systems are used to strengthen steel structures, but their long-term reliability depends on the integrity of the FRP–adhesive–steel interfaces. Existing studies have examined static bond behavior...

(This article belongs to the Special Issue Advances in Bonding, Fatigue, and Durability of FRP Composites for Building Applications)
  • Article
  • Open Access
1 Citations
2,691 Views
14 Pages

Investigation of Fatigue Behavior of Three Dimensional Interlock Composites by Time-Lapse Micro-Computed Tomography

  • Christophe Cruanes,
  • Keerthi Krishna Parvathaneni,
  • Dmytro Vasiukov and
  • Chung Hae Park

31 December 2021

The mechanism of the crack propagation in three dimensional (3D) glass-fiber warp interlock epoxy composites under fatigue loading was investigated via time-lapse micro-computed tomography (µCT) observations. Two different composite samples wer...

(This article belongs to the Special Issue Feature Papers in Journal of Composites Science in 2021)
  • Article
  • Open Access
21 Citations
3,452 Views
12 Pages

Finite Element Study of PEEK Materials Applied in Post-Retained Restorations

  • Hao Yu,
  • Zhihong Feng,
  • Ling Wang,
  • Senay Mihcin and ,
  • Jianfeng Kang,
  • Shizhu Bai and
  • Yimin Zhao
  • + 2 authors+ 0 author

22 August 2022

Background: This study aimed to investigate the biomechanical behaviors of polyether ether ketone (PEEK) and traditional materials (titanium and fiber) when used to restore tooth defects in the form of prefabricated post or customized post via comput...

(This article belongs to the Section Biobased and Biodegradable Polymers)
  • Article
  • Open Access
7 Citations
5,406 Views
22 Pages

27 June 2021

This article describes the characteristics of one type of sealing system used in warm edge glazing units and analyses the possible causes of damage. Attention was focused on the performance of the dual seal, PIB/silicone system. This type of glazing...

(This article belongs to the Special Issue Advanced Construction Materials and Processes in Poland)
  • Review
  • Open Access
2 Citations
618 Views
36 Pages

Anisotropic Behavior of 3D-Printed Concrete: Interlayer Bonding, Pore Architecture, Reinforcement Limitations, and Durability Mechanisms

  • Ali Mardani,
  • Mohammad Hematibahar,
  • Selin Özteber,
  • Qais Abdulrahman Ali Qais and ,
  • Ivan Khalil,
  • Tesfaldet Hadgembes Gebre and
  • Ahmed Elsheikh
  • + 2 authors+ 0 author

31 August 2026

The structural use of three-dimensional concrete printing remains limited by the directional weakness introduced during extrusion and layer-by-layer deposition. Although 3DPC offers major advantages in formwork elimination, architectural freedom, and...

(This article belongs to the Special Issue Microstructure Evolution, Mechanical Performance and Durability of Concrete and Cementitious Composites)
  • Article
  • Open Access
506 Views
17 Pages

Effect of Adhesion on the Impermeability of Anti-Floating Anchors or Piles Prestressed with Retarded-Bond Tendons

  • Liang Wu,
  • Daokai Wu,
  • Yunling Sun,
  • Chang Liu and ,
  • Fan Cheng,
  • Hua’an Zhong and
  • Yufeng Yan
  • + 2 authors+ 0 author

Water leakage in underground construction works is a prominent and persistent quality defect, particularly for the joint between the foundation slab and prestressed anti-floating anchors or piles. Previous studies have focused on optimizing the struc...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
14 Citations
3,690 Views
25 Pages

Fiber Orientation Effects in CFRP Milling: Multiscale Characterization of Cutting Dynamics, Surface Integrity, and Damage Mechanisms

  • Qi An,
  • Jingjie Zhang,
  • Guangchun Xiao,
  • Chonghai Xu and ,
  • Mingdong Yi,
  • Zhaoqiang Chen,
  • Hui Chen,
  • Chengze Zheng and
  • Guangchen Li
  • + 4 authors+ 0 author

During the machining of unidirectional carbon fiber-reinforced polymers (UD-CFRPs), their anisotropic characteristics and the complex cutting conditions often lead to defects such as delamination, burrs, and surface/subsurface damage. This study syst...

  • Article
  • Open Access
1,158 Views
21 Pages

Optimization Study on the Two-Color Injection Molding Process of Medical Protective Goggles Based on the BP-SSA Algorithm

  • Ming Yang,
  • Yasheng Li,
  • Jubao Liu,
  • Feng Li and ,
  • Jianfeng Yao and
  • Sailong Yan
  • + 1 author+ 0 author

28 February 2026

To solve common defects such as warpage deformation, interface debonding, and uneven filling during the two-color injection molding of medical goggles while meeting their multi-performance requirements, including high light transmittance, impact resi...

(This article belongs to the Section Polymer Processing and Engineering)