Skip to Content

2,069 Results Found

  • Perspective
  • Open Access
1,665 Views
29 Pages

The Transcritical CO2 Cycle: Promise, Pitfalls, and Prospects

  • Xiang Qin,
  • Yinghao Zeng,
  • Pan Li and
  • Yuduo Li

23 January 2026

As a natural refrigerant, CO2 shows significant potential in sustainable thermal engineering due to its environmental safety and economic viability. While the transcritical CO2 cycle demonstrates strong performance in heating, low-temperature applica...

  • Review
  • Open Access
90 Citations
16,741 Views
29 Pages

Spray Cooling as a High-Efficient Thermal Management Solution: A Review

  • Jing Yin,
  • Shangming Wang,
  • Xuehao Sang,
  • Zhifu Zhou and ,
  • Bin Chen,
  • Panidis Thrassos,
  • Alexandros Romeos and
  • Athanasios Giannadakis
  • + 3 authors+ 0 author

15 November 2022

As one of the most promising thermal management solutions, spray cooling has the advantages of high heat-transfer coefficient and maintaining a low temperature of the cooling surface. By summarizing the influential factors and practical applications...

(This article belongs to the Special Issue Challenges and Research Trends of Multiphase Flow)
  • Article
  • Open Access
29 Citations
3,756 Views
11 Pages

2 March 2020

Heat damage in deep mines is severe and can lead to adverse health effects. The existing refrigeration schemes for the heading face in excavation roadways aim to cool the whole cooling region. However, the ratio of the area occupied by workers to tha...

(This article belongs to the Section B: Energy and Environment)
  • Article
  • Open Access
4 Citations
1,419 Views
21 Pages

21 March 2025

In a global context marked by increasingly evident climate change and an urgent need to reduce carbon emissions, efficient and environmentally friendly energy solutions are no longer just an option, but a necessity. Decarbonizing cities is an essenti...

(This article belongs to the Section C: Energy Economics and Policy)
  • Article
  • Open Access
5 Citations
2,173 Views
24 Pages

A Study of a Two-Phase Heat Transfer Mechanism in a Vertical Sintering Cooling Furnace

  • Weihui Xu,
  • Qinbao Wang,
  • Juan Zhen,
  • Weishu Wang and ,
  • Yan Peng,
  • Boyan Tian,
  • Yushuai Ruan and
  • Renjie Li
  • + 3 authors+ 0 author

5 February 2024

In order to explore the law of gas–solid countercurrent cooling heat transfer in a vertical sinter cooling furnace at a high temperature, based on the Euler model and the local non-thermodynamic equilibrium theory, an exergy efficiency model wa...

(This article belongs to the Section J1: Heat and Mass Transfer)
  • Article
  • Open Access
1 Citations
1,661 Views
15 Pages

26 December 2025

This study examines the impact of chilled water supply parameters on the energy efficiency of an office building’s HVAC system located in a temperate European climate. Two cooling system variants were analyzed: (1) a traditional low-temperature...

  • Article
  • Open Access
18 Citations
4,454 Views
16 Pages

Experimental Evaluation of a Solar Low-Concentration Photovoltaic/Thermal System Combined with a Phase-Change Material Cooling Technique

  • Mahmoud B. Elsheniti,
  • Saad Zaheer,
  • Obida Zeitoun,
  • Hassan Alshehri and ,
  • Abdulrahman AlRabiah and
  • Zeyad Almutairi
  • + 1 author+ 0 author

20 December 2022

The high operating temperatures of photovoltaic (PV) panels negatively affect both electrical efficiency and material degradation rate. Combining both a water-cooling-based photovoltaic/thermal (PV/T) system and a phase-change material (PCM) with/wit...

(This article belongs to the Special Issue Heat Transfer Reinforcement Techniques in Heat Exchangers)
  • Review
  • Open Access
29 Citations
7,332 Views
23 Pages

18 March 2023

This article presents a review to provide up-to-date research findings on concentrated photovoltaic (CPV) cooling, explore the key challenges and opportunities, and discuss the limitations. In addition, it provides a vision of a possible future trend...

(This article belongs to the Special Issue Advanced Technologies of Solar Cells)
  • Article
  • Open Access
1 Citations
2,410 Views
14 Pages

17 June 2022

The lack of fresh water in the world has become a growing concern. As an open-source incremental technology for water resources, desalination has become an important method to solve the global water crisis. Based on the inherent safety, versatility,...

  • Article
  • Open Access
1,070 Views
34 Pages

17 April 2026

The article presents a comparative thermodynamic and economic analysis of nuclear power plants using high-temperature gas-cooled reactors (HTGRs) and small modular pressurized water reactors (SMRs). HTGRs, with their ability to achieve steam temperat...

(This article belongs to the Topic Sustainable Energy: Efficient Technological Solutions Combining Environmental, Economic, Political and Social Aspects, 2nd Edition)
  • Article
  • Open Access
3 Citations
3,258 Views
22 Pages

16 February 2025

This study investigates the development of a rapid wax injection tooling with enhanced heat dissipation performance using aluminum-filled epoxy resin molds and cooling channel roughening technology. Experimental evaluations were conducted on cooling...

(This article belongs to the Special Issue Laser Micro/Nano-Fabrication)
  • Article
  • Open Access
32 Citations
5,131 Views
13 Pages

24 July 2018

CO2 (GWP = 1) is considered as a promising natural alternative refrigerant to HFC-134a in mobile air conditioning (MAC) applications. The objective of this study is to investigate the cooling performance characteristics of a CO2 MAC system. A prototy...

(This article belongs to the Section D: Energy Storage and Application)
  • Article
  • Open Access
6 Citations
5,006 Views
17 Pages

Efficient heat dissipation remains a critical challenge in the research and development of automotive permanent magnet synchronous motors. In this study, a Tesla valve cooling channel is innovatively designed, and a corresponding flow model is establ...

(This article belongs to the Special Issue Design, Analysis and Optimization of Electrical Machines and Drives for Electric Vehicles, 2nd Edition)
  • Perspective
  • Open Access
74 Citations
13,970 Views
19 Pages

Development Trend of Cooling Technology for Turbine Blades at Super-High Temperature of above 2000 K

  • Liang Xu,
  • Zineng Sun,
  • Qicheng Ruan,
  • Lei Xi and ,
  • Jianmin Gao and
  • Yunlong Li
  • + 1 author+ 0 author

5 January 2023

Aeroengines and heavy-duty gas turbines are the core power equipment in the field of national defense and energy. Their research and development (R&D) level and manufacturing level represent the status of a country’s heavy industry in the world....

(This article belongs to the Section J1: Heat and Mass Transfer)
  • Article
  • Open Access
24 Citations
7,690 Views
18 Pages

Computational Fluid Dynamic Modeling of Horizontal Air-Ground Heat Exchangers (HAGHE) for HVAC Systems

  • Paolo Maria Congedo,
  • Caterina Lorusso,
  • Maria Grazia De Giorgi and
  • Domenico Laforgia

22 December 2014

In order to satisfy the requirements of Directive 2010/31/EU for Zero Energy Buildings (ZEB), innovative solutions were investigated for building HVAC systems. Horizontal air-ground heat exchangers (HAGHE) offer a significant contribution in reducing...

  • Article
  • Open Access
14 Citations
4,617 Views
18 Pages

Test and Modeling of the Hydraulic Performance of High-Efficiency Cooling Configurations for Gyrotron Resonance Cavities

  • Andrea Allio,
  • Rosa Difonzo,
  • Alberto Leggieri,
  • François Legrand and ,
  • Rodolphe Marchesin and
  • Laura Savoldi
  • + 1 author+ 0 author

4 March 2020

The design and manufacturing of different full-size mock-ups of the resonance cavity of gyrotrons, relevant for fusion applications, were performed according to two different cooling strategies. The first one relies on mini-channels, which are very p...

(This article belongs to the Section I: Energy Fundamentals and Conversion)
  • Article
  • Open Access
1 Citations
1,443 Views
16 Pages

3 April 2025

Ground temperature conditions are key factors affecting the stability of cast-in-place pile foundations for transmission towers in permafrost regions. With global climate warming, the ground temperature environment in permafrost regions has undergone...

(This article belongs to the Topic Applied Heat Transfer)
  • Article
  • Open Access
5 Citations
2,405 Views
19 Pages

High-Efficiency Surface-Cooled Rapid Tooling Development for Injection Molding of Low-Density Polyethylene

  • Chil-Chyuan Kuo,
  • Pin-Han Lin,
  • Jing-Yan Xu,
  • Armaan Farooqui and
  • Song-Hua Huang

11 February 2025

Epoxy resin filled with aluminum particles constitutes a polymer composite material commonly utilized in research and development departments to fabricate rapid tooling for prototyping new designs. This study developed aluminum-filled epoxy resin mol...

(This article belongs to the Topic Advanced Polymeric Composites: Processing, Characterization and Mechanical Behavior)
  • Article
  • Open Access
35 Citations
5,871 Views
10 Pages

A Pragmatic Bilayer Selective Emitter for Efficient Radiative Cooling under Direct Sunlight

  • Yiwei Liu,
  • Anqi Bai,
  • Zhenggang Fang,
  • Yaru Ni and ,
  • Chunhua Lu and
  • Zhongzi Xu
  • + 1 author+ 0 author

12 April 2019

Radiative cooling can make the selective emitter cool below ambient temperature without any external energy. Recent advances in photonic crystal and metamaterial technology made a high-efficiency selective emitter achievable by precisely controlling...

(This article belongs to the Special Issue Thin Film Fabrication and Surface Techniques)
  • Article
  • Open Access
6 Citations
3,292 Views
9 Pages

Numerical Investigation of High-Temperature Superconducting-Coated-Conductors Subjected to Rotating Magnetic Fields

  • Wafa Ali Soomro,
  • Youguang Guo,
  • Haiyan Lu,
  • Jianxun Jin and ,
  • Boyang Shen and
  • Jianguo Zhu
  • + 1 author+ 0 author

1 October 2022

Over time, high-temperature superconductor (HTS)-coated conductors (CCs) have proven to be promising candidates for future high-efficiency and high-power density electrical machines. However, their commercialization is handicapped due to the AC dissi...

  • Review
  • Open Access
26 Citations
10,359 Views
21 Pages

Thermal Analysis and Cooling Strategies of High-Efficiency Three-Phase Squirrel-Cage Induction Motors—A Review

  • Yashwanth Reddy Konda,
  • Vamsi Krishna Ponnaganti,
  • Peram Venkata Sivarami Reddy,
  • R. Raja Singh and ,
  • Paolo Mercorelli,
  • Edison Gundabattini and
  • Darius Gnanaraj Solomon
  • + 2 authors+ 0 author

In recent times, there has been an increased demand for electric vehicles. In this context, the energy management of the electric motor, which are an important constituent of electric vehicles, plays a pivotal role. A lot of research has been conduct...

  • Article
  • Open Access
10 Citations
2,829 Views
13 Pages

Passive-Cooling Building Coating with Efficient Cooling Performance and Excellent Superhydrophobicity

  • Xiaowei Yang,
  • Defeng Yan,
  • Yi Lu,
  • Yulin Shang and ,
  • Jing Sun and
  • Jinlong Song
  • + 1 author+ 0 author

25 July 2023

Passive-cooling building materials can achieve cooling without external energy consumption, which is an energy-saving and environmentally friendly cooling method. However, the existing passive-cooling building materials have the limitations of high c...

(This article belongs to the Special Issue Science and Technology for Silicate-Based Construction and Building Materials)
  • Review
  • Open Access
1,500 Views
27 Pages

Research Progress of Porous Radiative Cooling Films Based on Phase Separation Method

  • Shicheng Lu,
  • Youliang Cheng,
  • Mengyao Li,
  • Jing Chen and ,
  • Changqing Fang,
  • Xingbo Yao,
  • Changxue Cao and
  • Jiamin Fan
  • + 3 authors+ 0 author

30 January 2026

In recent years, against the backdrop of increasingly prominent global climate change and environmental issues, high-efficiency cooling technologies and energy-saving materials have become key research focuses. Radiative cooling, which reflects sunli...

(This article belongs to the Special Issue New Insights in Nanomaterials for Packaging Applications)
  • Communication
  • Open Access
8 Citations
4,433 Views
6 Pages

11 February 2022

A high power and efficiency mid-infrared optical parametric oscillator based on a BaGa4Se7 crystal is demonstrated in this paper. It was pumped by a 500 Hz Q-switched Nd:YAG laser at room temperature. Without cooling, up to 0.76 W output power at 4.4...

  • Feature Paper
  • Article
  • Open Access
5 Citations
2,166 Views
18 Pages

Comparison of a Solar Driven Absorption Chiller and Photovoltaic Compression Chiller Under Different Demand Profiles: Technological, Environmental and Economic Performance

  • Juan José Roncal-Casano,
  • Javier Rodríguez-Martín,
  • Paolo Taddeo,
  • Javier Muñoz-Antón and
  • Alberto Abánades-Velasco

10 October 2025

HVAC systems are becoming increasingly important around the world due to the increasing need for climatization in recent years. While district heating systems have been used for a long time, district cooling systems tend to be something that is only...

(This article belongs to the Section G: Energy and Buildings)
  • Article
  • Open Access
1 Citations
3,689 Views
28 Pages

5 September 2022

Natural draft hybrid cooling (NDHC) for thermal power generating units is proposed to achieve a balance of energy and water consumption for arid areas. This study examines the two main design forms of hybrid cooling with airside in serial and paralle...

  • Article
  • Open Access
8 Citations
7,678 Views
13 Pages

Heat Flow Characteristics of a Newly-Designed Cooling System with Multi-Fans and Thermal Baffle in the Wheel Loader

  • Yidai Liao,
  • Jiwen Zhuo,
  • Yinliang Zhang,
  • Honger Guan and ,
  • Heting Huang and
  • Huikun Cai
  • + 1 author+ 0 author

1 March 2017

In the traditional cooling case, there is usually one fan in charge of heat transfer and airflow for all radiators. However, this seems to be inappropriate, or even insufficient, for modern construction machinery, as its overall heat flow density is...

(This article belongs to the Special Issue Advances in Thermal System Analysis and Optimization)
  • Review
  • Open Access
15 Citations
7,912 Views
31 Pages

Review of Turbine Film Cooling Technology for Marine Gas Turbines

  • Yuhao Jia,
  • Yongbao Liu,
  • Xing He,
  • Ge Xia and
  • Zhengyu Shi

7 May 2025

Film cooling can continuously cover a layer of low-temperature gas film on the surface of hot-end components, thereby achieving the effect of isolating high-temperature gas, and can achieve a temperature drop of 600 K. As an advanced and efficient co...

(This article belongs to the Section Chemical Processes and Systems)
  • Article
  • Open Access
940 Views
15 Pages

Experimental Study on Refrigeration Characteristics of Absorption Chiller in Marine Environment

  • Fei Wang,
  • Heshan Zhao,
  • Weizheng An,
  • Ming Zhang and ,
  • Dan Jin and
  • Gang Wang
  • + 1 author+ 0 author

4 March 2026

Absorption chillers are key installations for recovering waste heat on offshore oil platforms. However, experimental data remain insufficient regarding how marine-induced vibration and sway affect lithium bromide (LiBr) chiller performance, which lim...

(This article belongs to the Section B: Energy and Environment)
  • Review
  • Open Access
8 Citations
10,430 Views
42 Pages

Comprehensive Review on Evaporative Cooling and Desiccant Dehumidification Technologies for Agricultural Greenhouses

  • Fakhar Abbas,
  • Muhammad Sultan,
  • Muhammad Wakil Shahzad,
  • Muhammad Farooq and ,
  • Hafiz M. U. Raza,
  • Muhammad Hamid Mahmood,
  • Uzair Sajjad and
  • Zhaoli Zhang
  • + 3 authors+ 0 author

Greenhouses are crucial for maintaining an ideal temperature and humidity level for plant growth; however, attaining ideal levels remains a challenge. Energy-efficient and sustainable alternatives are needed because traditional temperature/humidity c...

(This article belongs to the Topic Emerging Agricultural Engineering Sciences, Technologies, and Applications—2nd Edition)
  • Article
  • Open Access
9 Citations
2,372 Views
19 Pages

Numerical Analysis on Thermal and Flow Performance of Honeycomb-Structured Microchannel Cooling Plate for IGBT

  • Guangtao Zhai,
  • Hao Yang,
  • Wu Gong,
  • Fan Wu and ,
  • Junxiong Zeng,
  • Xiaojin Fu and
  • Tieyu Gao
  • + 2 authors+ 0 author

21 August 2025

In high-power insulated gate bipolar transistor (IGBT) module thermal management, the structural design of microchannel cooling plates plays a crucial role in determining heat dissipation efficiency and temperature uniformity. This study focuses on t...

(This article belongs to the Topic Enhanced Heat Transfer and Advanced Energy Conversion Technology, 2nd Edition)
  • Article
  • Open Access
3 Citations
2,901 Views
16 Pages

Hybrid Surrogate Model-Based Multi-Objective Lightweight Optimization of Spherical Fuel Element Canister

  • Yuchen Hao,
  • Jinhua Wang,
  • Musen Lin,
  • Menghang Gong and ,
  • Wei Zhang,
  • Bin Wu,
  • Tao Ma,
  • Haitao Wang,
  • Bing Liu and
  • Yue Li
  • + 5 authors+ 0 author

21 April 2023

A number of canisters need to be lightweight designed to store the spherical fuel elements (SFE) used in high-temperature gas-cooled reactors (HTGR). The main challenge for engineering is pursuing high-accuracy and high-efficiency optimization simult...

(This article belongs to the Topic Nuclear Energy Systems)
  • Article
  • Open Access
9 Citations
5,351 Views
8 Pages

13 July 2018

Recently, Korea has become increasingly interested in unused, but possibly useful energy resources, due to the world-wide controversy over nuclear power and limitations in renewable energy production. Among these unused resources, the water that is p...

  • Article
  • Open Access
1,936 Views
19 Pages

11 July 2024

Gas turbines are widely applied in many fields, and blade cooling is a key way to improve gas turbines’ power and efficiency. In order to explore a high-efficiency cooling method, a new variant configuration with unique coolant supply passage a...

(This article belongs to the Section I1: Fuel)
  • Article
  • Open Access
4 Citations
4,353 Views
29 Pages

Energy Saving Evaluation with Low Liquid to Gas Ratio Operation in HVAC&R System

  • Ju-wan Ha,
  • Yu-jin Kim,
  • Kyung-soon Park and
  • Young-hak Song

5 October 2022

Previous studies have been conducted by employing various methods to reduce the condenser water temperature, a crucial control variable to consider when attempting to improve the operational efficiency of a chiller. The existing literature dealing wi...

(This article belongs to the Topic Building Energy Efficiency)
  • Article
  • Open Access
4 Citations
4,229 Views
11 Pages

Study of the Technologies for Freeze Protection of Cooling Towers in the Solar System

  • Jingnan Liu,
  • Lixin Zhang,
  • Yongbao Chen,
  • Zheng Yin and ,
  • Yan Shen and
  • Yuedong Sun
  • + 1 author+ 0 author

19 December 2022

A cooling tower is an important guarantee for the proper operation of a solar system. To ensure proper operation of the system and to maintain high-efficiency points, the cooling tower must operate year-round. However, freezing is a common problem th...

(This article belongs to the Special Issue Advances in Solar Thermal Technologies: Renewable Energy Conversion and Utilization)
  • Article
  • Open Access
13 Citations
4,590 Views
26 Pages

Structure Design and Heat Transfer Performance Analysis of a Novel Composite Phase Change Active Cooling Channel Wall for Hypersonic Aircraft

  • Weichen Li,
  • Jieliang Zhao,
  • Xiangbing Wu,
  • Lulu Liang and ,
  • Wenzhong Wang and
  • Shaoze Yan
  • + 1 author+ 0 author

Efficient and stable heat dissipation structure is crucial for improving the convective heat transfer performance of thermal protection systems (TPSs) for hypersonic aircraft. However, the heat dissipation wall of the current TPS is limited by a sing...

(This article belongs to the Special Issue Heat Transfer and Fluid Flow in Microstructures)
  • Article
  • Open Access
5 Citations
5,272 Views
13 Pages

The accounting methodology for renewable energy in the European Union’s (EU) renewable heating and cooling targets is often treated as a mere technical detail, yet it has profound implications for the effectiveness of climate policies. This pap...

(This article belongs to the Special Issue Analysis of Energy Systems from the Perspective of Sustainability)
  • Article
  • Open Access
3 Citations
2,160 Views
24 Pages

13 November 2020

This paper proposes a natural gas assisted solar low-concentrating photovoltaic/thermal trigeneration (NG-LCPV/T-TG) system. This novel system simultaneously provides electrical, thermal and cooling energy to the user. The design and dynamic simulati...

(This article belongs to the Section A: Sustainable Energy)
  • Article
  • Open Access
12 Citations
4,127 Views
19 Pages

23 December 2021

In the present study, the real-world performance of a ground-to-air heat exchanger (GAHE) was analyzed in the Polish climate which is characterized by warm summers and cold winters. The heat exchanger’s performance was monitored over a period of thre...

  • Article
  • Open Access
2 Citations
1,082 Views
24 Pages

20 January 2026

Given automotive PEMFCs’ susceptibility to thermal runaway and uneven temperature distribution under high-power-density operation, this study proposes a novel embedded pulsating heat pipe cooling system. The core innovations of this work are th...

(This article belongs to the Section Sustainable Engineering and Science)
  • Article
  • Open Access
5 Citations
3,039 Views
22 Pages

Energy Efficiency and Conservation Approaches in Institutional Buildings: The Riyadh Reformatory Case in Saudi Arabia

  • Ahmed Al-Ardan,
  • Abdullah M. Al-Shaalan,
  • Hassan M. Hussein Farh and
  • Abdullrahman A. Al-Shamma’a

24 June 2025

This study presents a comprehensive assessment of energy efficiency and conservation strategies in institutional buildings, using the Riyadh Reformatory Building (RRB) in Saudi Arabia as a case study. The analysis focuses on meeting the operational a...

(This article belongs to the Special Issue Sustainable Energy and Climate: Net Zero Strategies and Rapid Decarbonisation Pathways)
  • Perspective
  • Open Access
7 Citations
6,306 Views
14 Pages

A Perspective on Radiative Cooling Paints: Bridging the Gap Between Optical Optimization and Practical Application

  • Zhuojing Zhao,
  • Zhenyu Guo,
  • Ya Huang,
  • Siming Zhao and ,
  • Yonglu Zang,
  • Fan Lan,
  • Ruina Liu,
  • Linan Feng,
  • Shuang Tao and
  • Rufan Zhang
  • + 7 authors+ 2 authors

26 December 2025

The escalating global heatwave crisis demands urgent advancements in high-efficiency, energy-saving cooling technologies. Radiative cooling (RC) paints, capable of passively dissipating heat through the atmospheric transparent window (ATW, 8–13...

(This article belongs to the Special Issue Functional Films and Coatings for Perovskite Solar Cells: Stability, Efficiency and Scalability)
  • Article
  • Open Access
7 Citations
3,550 Views
28 Pages

Policies and Energy Efficiency of Heat Recovery Ventilators in South Korea

  • Byung-Heon Jeon,
  • Su-Kwang Yang,
  • Young-Chull Ahn and
  • Yul-Ho Kang

12 November 2023

To reduce national greenhouse gas emissions, the South Korean government has encouraged new energy businesses and implemented policies to reduce energy consumption in buildings, and aims to construct all new buildings as zero-energy buildings by 2025...

(This article belongs to the Section G: Energy and Buildings)
  • Article
  • Open Access
9 Citations
4,600 Views
22 Pages

Topology Optimization Design of Phase Change Liquid Cooling Composite Plate

  • Xinqiang Xia,
  • Jiancheng Luo,
  • Jiabao Li and
  • Lixia Wei

20 May 2025

To address the challenges of high flow resistance and poor temperature uniformity in conventional PCM–liquid cooling hybrid heat exchangers—which significantly impair the performance and lifespan of electronic devices—a topology opt...

  • Article
  • Open Access
3 Citations
3,014 Views
10 Pages

3D Viscoplastic Finite Element Modeling of Dislocation Generation in a Large Size Si Ingot of the Directional Solidification Stage

  • Maohua Lin,
  • Xinjiang Wu,
  • Xinqin Liao,
  • Min Shi and ,
  • Disheng Ou and
  • Chi-Tay Tsai
  • + 1 author+ 0 author

29 August 2019

Growing very large size silicon ingots with low dislocation density is a critical issue for the photovoltaic industry to reduce the production cost of the high-efficiency solar cell for affordable green energy. The thermal stresses, which are produce...

(This article belongs to the Special Issue Multi-scale Modeling of Materials and Structures)
  • Review
  • Open Access
21 Citations
5,521 Views
22 Pages

5 September 2025

Nanofluids have long been explored for enhancing heat transfer, with early studies focusing primarily on improved thermal conductivity. However, in spray and droplet cooling applications, recent research indicates that conductivity alone cannot fully...

  • Article
  • Open Access
20 Citations
4,702 Views
22 Pages

19 September 2025

The increasing demand for high-efficiency cooling technologies necessitates improved methods to prevent degradation and ensure reliable operation of lithium–ion batteries. Conventional PCM (phase change material)-based cooling systems are limit...

  • Feature Paper
  • Article
  • Open Access
10 Citations
3,040 Views
9 Pages

Additive Manufacturing of an IH-Type Linac Structure from Stainless Steel and Pure Copper

  • Hendrik Hähnel,
  • Adem Ateş,
  • Benjamin Dedić and
  • Ulrich Ratzinger

Additive manufacturing (AM) of metals has the potential to provide significant benefits for the construction of future particle accelerators. The combination of low cost manufacturing of complex geometries in combination with efficiency gains from im...

  • Article
  • Open Access
9 Citations
6,337 Views
13 Pages

19 January 2018

In the 21st century, there is an increasing need for high-capacity, high-efficiency, and environmentally friendly power generation systems. The environmentally friendly integrated gasification combined-cycle (IGCC) technology has received particular...

(This article belongs to the Special Issue Microstructure based Modeling of Metallic Materials)

of 42