- Article
The application of electrochemical cells as a source unit of electrical energy is rapidly growing—used in electric vehicles and other electric mobility devices, as well as in energy supply systems—as energy storage, often together with re...
The application of electrochemical cells as a source unit of electrical energy is rapidly growing—used in electric vehicles and other electric mobility devices, as well as in energy supply systems—as energy storage, often together with re...
Environmental issues and the global need to extend sustainable access to electricity have fostered a huge amount of research in distributed generation by renewables. The challenges posed by the widespread deployment of distributed generation by renew...
The operation of a power system with 100% converter-interfaced generation poses several questions and challenges regarding various aspects of the design and the control of the system. Existing literature on the integration of renewable energy sources...
This paper proposes a buffered microgrid with a modular grid interface consisting of a modular back-to-back converter. The proposed method provides a flexible strategy that enables both the load and generation expansion of the microgrid, with no sizi...
The application of constant power control and inclusion of energy storage in grid-connected photovoltaic (PV) energy systems may increase the use of two-stage system structures composed of DC–DC-converter-interfaced PV generator and grid-connected in...
Power grids are progressing, and the possibility of incorporating DC grids toward hybrid AC/DC grids is gaining increasing relevance, as several technologies available nowadays are operating natively in DC. This paper proposes a topology of a full-co...
This paper presents an approach to extend the capabilities of smart grid laboratories through the concept of Power Hardware-in-the-Loop (PHiL) testing by re-purposing existing grid-forming converters. A simple and cost-effective power interface, pair...
This study investigates the emerging harmonic stability concerns to be addressed by grid planners in generation interconnection studies, owing to the increased adoption of renewable energy resources connected to the grid via power electronic converte...
This paper presents an analysis of a new application of different direct matrix converter topologies used as power interfaces in AC, DC, and hybrid microgrids, with model predictive current control. Such a combination of a converter and control strat...
Low-voltage ride-through (LVRT) and grid support capability are becoming a necessity for grid-tied renewable energy sources to guarantee utility availability, quality and reliability. In this paper, a swap control scheme is proposed for grid-tied per...
Recent trends in building energy systems such as local renewable energy generation have created a distinct demand for energy storage systems to reduce the influence and dependency on the electric power grid. Under the current market conditions, a ran...
In this paper, a comparison of the emissions of grid-connected converters under grid distortion in the supraharmonic range is performed. The investigated supraharmonic grid distortion is divided into two types, namely odd-integer and even-integer mul...
This paper presents the power electronics architecture of an electric vehicle (EV) charging station operating as a DC microgrid with an AC grid interface. The grid-interface converter is implemented using an interleaved bidirectional DC–AC conv...
Grid impedance is an important parameter which affects the control performance of grid-connected power converters. Several methods already exist for optimizing the converter control system based on knowledge of grid impedance value. Grid impedance ma...
This paper proposes a novel on-board electric vehicle (EV) battery charger (EVBC) based on a bidirectional multilevel topology. The proposed topology is formed by an AC-DC converter for the grid-side interface and by a DC-DC converter for the battery...
AC–DC power-flow calculation is the basis for studying HVDC systems. Since traditional iterative methods need many alternative iterations and have convergence problems, this paper proposes an alternating iterative power-flow algorithm for hybri...
A low carbon, high efficiency and high quality power supply scheme for Distributed Generation (DG) in a micro-grid is presented. A three-phase, four-leg DG grid-interfacing converter based on the improved structure of a Unified Power Quality Condi...
The diffusion of electric vehicles will be strongly related to the capacity to charge them in short times. To do so, the necessity of widespread fast charging stations arises. However, their intermittent demand represents a challenging load for grid...
The operation of isolated power systems with 100% converter-based generation requires the integration of battery energy storage systems (BESS) using grid-forming-type power converters. Under these operating conditions, load dynamics influences the ne...
The increasing penetration of renewable energy sources (RESs) in transmission and distribution systems presents several challenges for grid operators. In particular, the unpredictable behavior of RESs can disrupt the balance between energy production...
Against the backdrop of increasingly power-electronics-dominated power systems, renewable energy resources are interfaced with the grid through power converters, which are generally categorized as grid-following (GFL) and grid-forming (GFM) converter...
Alongside the rapid increase in distributed power generation and load, the demand for highly efficient and reliable power converters is increasing. This has resulted in the rise of grid interfaced renewable energy sources (RES), rapid deployment of b...
The increasing penetration of distributed energy resources, variable renewable generation, battery energy storage systems, electric vehicles, and power-electronic interfaces is changing the way modern smart grids and microgrids are operated, protecte...
The grid integration of renewable energy sources interfaced through power electronic converters is undergoing a significant acceleration to meet environmental and political targets. The rapid deployment of converters brings new challenges in ensuring...
The focus of this paper is to provide a comparative analysis of various common-ground converters that serve as dual-purpose power electronic interfaces. These interfaces are designed to be used in both DC and single-phase AC grids, utilizing the same...
Historically, the power system has relied on synchronous generators (SGs) to provide inertia and maintain grid stability. However, because of the increased integration of power-electronics-interfaced renewable energy sources, the grid’s stabili...
Back-to-back current source converters play an important role in high power applications. However, this back-to-back converter system uses a larger number of power switches, which is associated with more cost and the power density of the converter sy...
This paper presents a synchronous resonant control strategy based on the inherent characteristics of permanent magnet synchronous generators (PMSG) for the control of power converters to provide stable operating conditions for the power grid under hi...
Bi-directional DC-AC converters are widely used in the field of electric vehicle-to-grid. However, the inductance of the grid-side interface filter is affected by the length of the grid connection and the power level, which presents nonlinear charact...
Electrical power grids are facing challenges concerning new linked technologies and associated contributions of power electronics, both regarding innovative topologies of power converters and advanced power management algorithms. Additionally, techno...
This paper proposes the design and implementation of inductor-inductor-capacitor (LLC) converters with modules connected in series with the power scan method and communication scan network (CSN) to achieve MPPT and regulate the output voltage for the...
The analysis presented in this paper is focused on the harmonics distortion damping in the case of bidirectional power-flow of the electronics device—matrix converter as an interface between two power sources. Bidirectional energy flow takes place in...
A main focus in microgrids is the power quality issue. The used renewable sources fluctuate and this fluctuation has to be suppressed by designing a control variable to nullify the circulating current caused by voltage fluctuations and deviations. Th...
This paper is aimed at modelling of a distinct smart charging station for electric vehicles (EVs) that is suitable for DC quick EV charging while ensuring minimum stress on the power grid. Operation of the charging station is managed in such a way th...
To prevent DC-bus voltage sag and overvoltage during power-supply takeover after a public-grid outage in an industrial microgrid, this study proposes a continuous power-supply control strategy for critical loads that combines dynamic source-side-defi...
In traditional grid-tied photovoltaic (PV) installations, when partial shadowing occurs between different PV modules in a string, bypass diodes short-circuit the output terminals of shadowed modules, and the whole system forgoes their potential energ...
With the move towards decarbonization of the energy system and increased use of renewable generation, the number of power electronics converter interfaced resources connecting to the grid is growing. These power electronics converters have fast dynam...
The demand for a more sustainable energy system is driving the development of renewable energy sources and green technologies within the electrical sector. However, integrating these technologies is challenging due to the increased complexity of the...
This paper explores how different control strategies—grid-forming and grid-following—impact the transient stability of modular multilevel converters (MMCs) interfacing with AC power grids. By employing electromagnetic transient simulation...
The modern smart grid is a vital component of national development and is a complex coupled network composed of power and communication networks. The faults or attacks of either network may cause the performance of a power grid to decline or result i...
The high penetration of renewable energy sources (RES), particularly power-electronic-interfaced wind and solar generation, is transforming conventional power systems into converter-dominated smart grids. While this transition supports decarbonizatio...
Modern distribution grids may suffer problems of voltage distortion, especially along radial low-voltage feeders with a high penetration of intermittent, unbalanced and distorted loads and generation sources. It is a challenge to develop an effective...
This paper presents the control and simulation of an electric vehicle (EV) charging station using a three-level converter on the grid-side as well as on the EV-side. The charging station control schemes with three-level AC/DC power conversion and a b...
Converter-interfaced resources in active distribution networks (ADNs) can provide virtual-inertia support, but inertia coordination based on initial frequency-response metrics, such as the rate of change of frequency (RoCoF) and frequency nadir, may...
To mitigate the fast-growing demand of electrical energy, the use of renewable energy resources, e.g., solar and wind, can offer an environmentally friendly and sustainable solution. Due to their intermittent nature, the grid connected operation of r...
Direct current (DC) bus voltage stability in grid-connected microgrids with multiple energy-storage converter branches is governed by the coupled dynamics of photovoltaic generation, heterogeneous battery storage, and the grid-connected inverter. Con...
The move towards a greener energy mix to fight climate change propels investments in converter-interfaced resources such as wind and photovoltaics, energy storage systems and electric vehicles. The ongoing evolution of the power system is occurring a...
The oscillatory behaviour of the power system is an aspect that is significantly affected by the increasing integration of converter-based generation sources. Several works address the impact of non-synchronous generation on the operation of the syst...
The gradual displacement of synchronous generators driven by conventional power plants, due to the increasing penetration of distributed renewable energy sources (DRES) in distribution grids, is creating a shortage of crucial ancillary services (AS)...
Due to the irreversible energy substitution from fossil fuels to clean energy, the development trend of future power systems is based on renewable energy generation. However, due to the incompatibility of converter-based non-dispatchable renewable en...
of 6