- Article
Traditional physical similarity simulation methods struggle to replicate the cumulative unloading–expansion effect in overburden, particularly due to inherent limitations in representing the bulking–compaction behavior of fractured rock m...
Traditional physical similarity simulation methods struggle to replicate the cumulative unloading–expansion effect in overburden, particularly due to inherent limitations in representing the bulking–compaction behavior of fractured rock m...
This study is aimed at exploring the influence of narrow coal pillars in gob-side entry driving (GSED) on the development height of the water-conducting fracture zone (WCFZ) in the fully mechanized caving face. In reference to the geological mining c...
To address the stability control challenges of the “support-surrounding rock” system in fully mechanized top-coal caving faces within steeply dipping coal seams, this study employs an integrated approach combining theoretical analysis and...
To investigate the evolution trend of the extraction zone above the drawbell in block caving, an experimental apparatus incorporating the drawbell structure was designed. Ore drawing experiments were conducted using materials with varying particle si...
The height of water-conducting fracture zones (WCFZs) is vital for the prevention of water, gas, and roof accidents in coal mines. However, its dynamic evolution law and maximum height are difficult to be obtained by traditional prediction methods, e...
Cave systems serve as key interfaces connecting surface and underground carbon cycles, and research on their carbon dynamics provides a unique perspective for revealing the mechanisms of carbon transport and transformation in karst critical zones. In...
To study the caving of thick hard overburdens and evolution of water-conducting fracture zones in fully mechanized top-coal caving faces of gently inclined extra-thick coal seams, we comprehensively analyzed the 8103 working face of the Beixinyao Coa...
Underground coal gasification (UCG) is an emerging energy technology that involves the in situ conversion of coal into syngas through controlled combustion within a subsurface excavation. The geomechanical processes associated with UCG can lead to si...
Due to the thin bedrock, typical geological characteristics, and the high-intensity underground mining in western China, the water and sand inrush pour into the panels through the broken rock fragmentations in the caving zone, which could result in s...
The recovery of residual and previously unmined ore reserves near caving and active-displacement zones is complicated by increased ore loss, dilution, development requirements, support demand, and economic uncertainty. This study presents an explorat...
Dynamically grasping the scope of the caving zone and fractured zone in overlying strata is crucial for ground pressure control in sublevel caving mining. Taking Dahongshan Iron Mine as the research object, this study systematically analyzed the evol...
With the increasing depth of coal mining operations, the repeated extraction of multiple coal seams has led to serious safety threats to mines, including secondary roof fracturing, interlayer separation-induced water hazards, and intense mine pressur...
The section span of the withdrawal space of fully mechanized top coal caving in an extra-thick coal seam is large, and with the gradual withdrawal of the hydraulic support, a series of strong dynamic pressure disasters occur in the withdrawal space,...
Understanding the recharge and runoff processes of the vadose zone is significant for water resource management and utilization in karst mountain areas. Hydrological modeling of the vadose zone in karst caves has provided new methods of evaluating wa...
There have been frequent occurrences of water–sand inrushes in underground mines due to irregular mining activities under thick loose gravel layers. The morphological development characteristics of the caving zone and the changes in the geological co...
Although marine caves are among the most species-diverse habitats in the Mediterranean Sea, most available studies have focused on their sessile fauna. This study provides the first quantitative assessment of motile fauna in 27 marine caves across fo...
To clarify the migration and structural evolution of mining-induced overburden following grouting reconstruction of the Fourth Aquifer, the inner section of Panel 1022-2 in Wugou Coal Mine was taken as the engineering background. The evolution law of...
In order to study the development height of the water-conducting fracture zone in a fully mechanized top coal caving face. The E2311 working face of Gaohe Coal Mine was chosen as the research object, and the combined-strata structure and the rock lay...
Strata movement due to extraction of a longwall panel is of great significance both in terms of environment and ground control. Thick coal seam extraction is expected to severely disturb the overburden, which is critical. Most studies use only one or...
Caves possess a continuum of ecological zones that differ in their microhabitat conditions, resulting in a gradient of nutrients, climate, and illumination. These conditions engender relatively rapid speciation and diverse assemblages of highly speci...
Caves are characterized by unique abiotic conditions such as limited light, and they therefore support distinct faunal assemblages that often include endemic species. Due to light limitations, photoautotrophic organisms are absent from many subterran...
Karst areas are characteristic landscapes formed by the dissolution of soluble rocks, whose hydrology is largely influenced by rapid infiltration through the karst massif. These areas are often hotspots of biodiversity, especially for epikarst and ca...
Understanding the hydrological processes of dissolved organic matter (DOM) in the surface karst zone is crucial for the utilization and safety of groundwater resources. However, research on DOM in drip water from karst caves is limited. In this study...
The key to the safe mining of thick coal seams under rivers is understanding the development patterns of fractured water-conducting zones (FWCZ) when various mining methods are used. To solve this problem, we employed numerical simulation to investig...
Through field observations, theoretical analysis, and a calibrated numerical model, a study of stress redistribution due to the extraction of longwall panels at depths ranging from 580 to 660 m with a 30° dip angle at Tangshan coal mine is presen...
An in-depth understanding of the gravity flow behaviour of broken ore is beneficial to improving the ore recovery in sublevel caving mines. In this study, granular dolomites were used as an analogue to experimentally explore the effect of the physica...
The unsaturated zone is a critical component of karstic groundwater systems and is shown to provide substantial storage capacities. Understanding the spatial patterns and controls on flow path activation is often a challenge. Previous research focuse...
Addressing the issue of low filling efficiency in gangue slurry backfilling due to unclear evolution characteristics of voids in the overlying collapsed rock mass during mining, this study utilizes fiber optic sensing technology to monitor real-time...
Limestone corrosion and coastal karst cave (flank margin cave) enlargement are closely related by the mixing zone between meteoric and seawater, yet quantitative data on corrosion rates in these environments remain scarce. Recent speleodiving explora...
Although it is of great significance to master the height of the water-conducting fracture zone (WCFZ) to prevent coal mine disasters and ensure safe production, the most important thing is to predict the height and range of the WCFZ ahead of the wor...
Accurate prediction of the height of water-conducting fissure zone (HWCFZ) is an important issue in coal water control and a prerequisite for ensuring the safe production of coal mines. At present, the prediction model of HWCFZ has some issues such a...
El Olivo Cave (Pruvia de Arriba, Llanera, Asturias, Spain) is a small karst cave located in the Aboño River basin and formed in the Cretaceous limestone of the Mesozoic cover of the Cantabrian Mountains (north of the Iberian Peninsula). It con...
During the underground mining of coal resources, the rock pressure emerges acutely and the mine geological disasters occur frequently. It is of great significance to grasp the manifestation law of rock pressure in time to guide the safety production...
Submarine caves are important biodiversity reservoirs, but there is little information about the biota of marine caves in the Southwestern Atlantic. Here, we describe three submarine cavities and their sponge communities on the Fernando de Noronha Ar...
During the ventilation of longwalls in hard coal mines, part of the air stream migrates to the goaves with caving. These goaves constitute a space (void) filled with rocks following coal extraction. In the case where these goaves contain coal suscept...
Metal mines mined using the sublevel caving method often exhibit various environmental problems on the ground surface. This can affect the safety of the production process in the mining area. A numerical model using Universal Distinct Element Code ha...
Longwall top coal caving is one of the most effective methods for extracting steeply inclined and ultra-thick coal seams. To investigate the influence of caving ratio (the proportion between mining height and top coal thickness) on top coal recovery...
Mediterranean marine caves have been categorized as both biodiversity reservoirs and vulnerable habitats. However, only a few studies have focused on Porifera assemblages within marine caves along the Adriatic Apulian coast (southern Italy). In this...
A giant strike-slip fault-controlled Fuman Oilfield has been found in the Ordovician fractured carbonates of the Tarim Basin. However, conventional seismic methods are hardly able to distinguish the fractured reservoir and its connectivity in the ult...
A geological and speleological investigation was conducted in the famous Blue Cave (Modra špilja) and the Monk Seal Cave (Medvidina špilja) on Biševo Island (Croatia) to promote the island’s geoheritage through the new Visitor Centre. The island is m...
This paper presents an innovative numerical approach to simulating the progressive caving of rock mass in the overburden and floor during longwall mining. A modified caving algorithm is incorporated into FLAC3D 9.0, augmented with the IMASS constitut...
The high risk of collapse is a key issue affecting the construction safety of karst tunnels. A risk assessment method for karst tunnel collapse based on data-driven Bayesian Network (BN) self-learning is proposed in this study. The finite element cal...
Caves serve as time capsules, preserving significant markers of tectonic activity and offering insights into geological history. Fault geometries and past activations found in caves can be correlated with known deformational events in the broader are...
Fishes in marine caves have attracted limited attention by the scientific community in comparison to subterranean fishes which have lost eyes and pigmentation. They constitute a largely unexplored component of marine fish diversity, except for the re...
The rock mass in the caving zone of a goaf is relatively broken and considered a porous medium. Additionally, it has the characteristics of irregular size and shape and sharp edges, and it is easy to break. In the process of caving zone compaction, t...
The intrusion of groundwater inevitably alters the environment within the caving zones of mined-out areas and affects the mechanical properties of the surrounding rock mass, thereby influencing surface deformation. To investigate the deformation mech...
Tunnel construction adjacent to a water-filled karst cave is very prone to sudden water and mud inrush and to other geological hazards. This paper presents a numerical study of the damage that the blasting of the tunnel face causes to the rock pillar...
Surface subsidence induced by underground mining in mining areas significantly alters surface topography and hydrogeological conditions, forming depressions and fissures, thereby affecting regional runoff-ponding processes and groundwater infiltratio...
As China enters the stage of deep coal mining, the accidents caused by roof failure pose increasingly serious threats. Current research on roof failure zones often use single methods, but single geophysical data may result in multisolution issues dur...
A total of 152 aerosol and spider web samples were collected: 96 spider’s webs in karst areas in 4 European countries (Czech Republic, France, Italy, and Slovakia), specifically from the surface environment (n = 44), photic zones of caves (n =...
of 6