Skip to Content
You are currently on the new version of our website. Access the old version .

200 Results Found

  • Article
  • Open Access
18 Citations
5,204 Views
13 Pages

6 July 2022

This research paper aims to improve the quality of 3D printed parts made of the wax filament by implementing the Taguchi orthogonal array process optimization method. The manufactured parts can be used as cost-effective investment casting patterns. W...

(This article belongs to the Special Issue Recent Trends on the Mechanical Properties of Additive Manufacturing)
  • Article
  • Open Access
7 Citations
3,040 Views
21 Pages

An Effective Framework Using Spatial Correlation and Extreme Learning Machine for Moving Cast Shadow Detection

  • Yugen Yi,
  • Jiangyan Dai,
  • Chengduan Wang,
  • Jinkui Hou and ,
  • Huihui Zhang,
  • Yunlong Liu and
  • Jin Gao
  • + 2 authors+ 0 author

22 November 2019

Moving cast shadows of moving objects significantly degrade the performance of many high-level computer vision applications such as object tracking, object classification, behavior recognition and scene interpretation. Because they possess similar mo...

(This article belongs to the Section Optics and Lasers)
  • Review
  • Open Access
18 Citations
4,279 Views
25 Pages

22 September 2022

Although grinding is essential in the production of castings, the casting grinding process in manufacturing is complicated and there are many difficulties, such as the large amount of noise in the grinding environment, non-structural casting entities...

(This article belongs to the Special Issue Machine Learning for Advanced Manufacturing)
  • Systematic Review
  • Open Access
3 Citations
2,550 Views
20 Pages

16 October 2025

Introduction: Three-dimensional (3D) printing technology has rapidly evolved across various fields of medicine and dentistry, particularly in orthodontics. One key application in orthodontics is the fabrication of dental models. Numerous parameters t...

(This article belongs to the Special Issue 3D Printing Applications in Dentistry)
  • Article
  • Open Access
13 Citations
4,330 Views
13 Pages

Fabrication of Natural Flake Graphite/Ceramic Composite Parts with Low Thermal Conductivity and High Strength by Selective Laser Sintering

  • Haihua Wu,
  • Kui Chen,
  • Yafeng Li,
  • Chaoqun Ren and ,
  • Yu Sun and
  • Caihua Huang
  • + 1 author+ 0 author

14 February 2020

The 3D graphite/ceramic composite prototyping parts directly prepared by selective laser sintering (SLS) were porous, which led to poor strength and low thermal conductivity. In order to obtain low thermal conductivity and high strength, its thermal...

(This article belongs to the Special Issue Progress in 3D Printing of Materials)
  • Article
  • Open Access
4 Citations
3,361 Views
14 Pages

Optimizing the Material Extrusion Process for Investment Casting Mould Production

  • Pablo Rodríguez-González,
  • Pablo Zapico,
  • Sofía Peláez-Peláez,
  • María Ángeles Castro-Sastre and
  • Ana Isabel Fernández-Abia

This study investigates the optimization of the Material Extrusion (MEX) process for producing polylactic acid (PLA) patterns used in investment casting moulds, specifically targeting the casting of non-ferrous alloys such as brass. Key MEX process p...

(This article belongs to the Special Issue Advances in Additive Manufacturing and Material Characterization Techniques)
  • Article
  • Open Access
3 Citations
2,341 Views
21 Pages

25 November 2024

This study explored how post-casting heat treatment and forging affected the tribological and microstructural characteristics of 0.20% beryllium (Be)-added CuAl10Ni5Fe4 alloys. The heat-treated CuAl10Ni5Fe4 microstructure exhibits a copper-rich &alph...

  • Article
  • Open Access
110 Citations
7,792 Views
13 Pages

12 June 2018

The selective laser melting (SLM) process was used to fabricate an Alloy718 specimen. The microstructure and creep properties were characterized in both the as-built and post-processed SLM materials. Post-processing involved several heat treatments a...

(This article belongs to the Special Issue Selective Laser Sintering (SLS) of Materials)
  • Article
  • Open Access
215 Citations
17,341 Views
12 Pages

Fabricating Superior NiAl Bronze Components through Wire Arc Additive Manufacturing

  • Donghong Ding,
  • Zengxi Pan,
  • Stephen Van Duin,
  • Huijun Li and
  • Chen Shen

3 August 2016

Cast nickel aluminum bronze (NAB) alloy is widely used for large engineering components in marine applications due to its excellent mechanical properties and corrosion resistance. Casting porosity, as well as coarse microstructure, however, are accom...

(This article belongs to the Special Issue Metals for Additive Manufacturing)
  • Article
  • Open Access
11 Citations
6,390 Views
13 Pages

Design and Processing of Gas Turbine Blades Based on Additive Manufacturing Technology

  • Xuan Liu,
  • Xingguo Han,
  • Guofu Yin,
  • Xiaohui Song and
  • Lixiu Cui

27 August 2023

Aiming at the problems of the complex shape, difficult three-dimensional (3D) digital modeling and high manufacturing quality requirements of gas turbine blades (GTB), a method of fitting the blade profile line based on a cubic uniform B-spline inter...

(This article belongs to the Topic Micro-Mechatronic Engineering)
  • Article
  • Open Access
17 Citations
3,894 Views
13 Pages

Effect of Heat Treatment on Microstructure and Selective Corrosion of LPBF-AlSi10Mg by Means of SKPFM and Exo-Electron Emission

  • Marina Cabrini,
  • Sergio Lorenzi,
  • Cristian Testa,
  • Diego Manfredi and ,
  • Mariangela Lombardi,
  • Alberta Aversa,
  • Francesco Andreatta,
  • Lorenzo Fedrizzi,
  • Yuri Dekhtyar and
  • Tommaso Pastore
  • + 6 authors+ 1 author

27 September 2021

The paper deals with the evolution of the microstructure of AlSi10Mg alloy obtained by laser powder bed fusion (LPBF), as a function of the post-processing heat treatment temperature. This was approached by complementary methods including FE-scanning...

(This article belongs to the Special Issue Corrosion in Additive Manufacturing)
  • Article
  • Open Access
1 Citations
940 Views
26 Pages

Microstructural Diversity in Dispersed Composites Governed by Inclusion Distribution

  • Vladimir Mityushev,
  • Pawel Kurtyka,
  • Zhanat Zhunussova and
  • Akylkerey Sarvarov

The microstructure of metal matrix composites is inherently governed by fabrication routes and processing parameters, yet technological and physical constraints often prevent the realization of intended structural designs. In particle-reinforced comp...

(This article belongs to the Special Issue Processing, Mechanical Properties, and Manufacturing Techniques of Advanced Composite Materials)
  • Article
  • Open Access
4 Citations
3,200 Views
18 Pages

Additive-Free Gelatine-Based Devices for Chondral Tissue Regeneration: Shaping Process Comparison among Mould Casting and Three-Dimensional Printing

  • Margherita Montanari,
  • Alex Sangiorgi,
  • Elisabetta Campodoni,
  • Giada Bassi and ,
  • Davide Gardini,
  • Monica Montesi,
  • Silvia Panseri,
  • Alessandra Sanson,
  • Anna Tampieri and
  • Monica Sandri
  • + 5 authors+ 0 author

4 March 2022

Gelatine is a well-known and extensively studied biopolymer, widely used in recent decades to create biomaterials in many different ways, exploiting its molecular resemblance with collagen, the main constituent of the extra-cellular matrix, from whic...

(This article belongs to the Special Issue Biomedical Applications of Polymer and Composite Based Additive Manufacturing)
  • Article
  • Open Access
10 Citations
4,838 Views
21 Pages

Effect of Post-Processing Treatment on Fatigue Performance of Ti6Al4V Alloy Manufactured by Laser Powder Bed Fusion

  • Ane Miren Mancisidor,
  • María Belén García-Blanco,
  • Iban Quintana,
  • Pedro José Arrazola and ,
  • Elixabete Espinosa,
  • Mikel Cuesta,
  • Joseba Albizuri and
  • Fermin Garciandia
  • + 3 authors+ 0 author

Fatigue properties of parts are of particular concern for safety-critical structures. It is well-known that discontinuities in shape or non-uniformities in materials are frequently a potential nucleus of fatigue failure. This is especially crucial fo...

  • Article
  • Open Access
1,373 Views
14 Pages

Development of a Three-Dimensional Mucosal Surface Cast of the Caprine Ruminoreticulum

  • Joachim Truelsen,
  • Julia Hollenbach,
  • Elisabeth Engelke,
  • Matthias Lüpke and ,
  • Kerstin von Pückler,
  • Lara Ott,
  • Johanna-Marie Haumann,
  • Sandra Wissing,
  • Kristin Elfers and
  • Christiane Pfarrer
  • + 5 authors+ 0 author

17 April 2026

In veterinary education, many exercises are performed on animals. Palpating the mucosa of the Ruminoreticulum in ruminants is a necessary preparatory exercise for future surgery. However, there are legal and ethical obligations to reduce the use of a...

(This article belongs to the Section Anatomy, Histology and Pathology)
  • Review
  • Open Access
31 Citations
10,740 Views
45 Pages

18 February 2025

Cooling Rate (CR) definitively influences the microstructure of metallic parts manufactured through various processes. Factors including cooling medium, surface area, thermal conductivity, and temperature control can influence both predicted and unfo...

(This article belongs to the Special Issue Innovations in the Design, Simulation, and Manufacturing of Production Systems)
  • Article
  • Open Access
2 Citations
2,264 Views
27 Pages

Cytocompatibility Assessment of L-PBF-Manufactured Zinc–Silver–Copper Alloys for Customized Biodegradable Medical Implants

  • Barbara Illing,
  • Jacob Schultheiss,
  • Lukas Schumacher,
  • Evi Kimmerle-Mueller and ,
  • Ariadne Roehler,
  • Alexander Heiss,
  • Ulrich E. Klotz,
  • Victor O. Okafor,
  • Stefanie Krajewski and
  • Frank Rupp
  • + 5 authors+ 0 author

Biodegradable zinc (Zn) has attracted increasing interest as a material for temporary implants, primarily due to its moderate degradation kinetics. In recent years, additive manufacturing of Zn alloys using the laser powder bed fusion method (L-PBF)...

(This article belongs to the Section Biomaterials and Devices for Healthcare Applications)
  • Article
  • Open Access
20 Citations
7,887 Views
15 Pages

High Temperature Deformation Mechanisms in a DLD Nickel Superalloy

  • Sean Davies,
  • Spencer Jeffs,
  • Robert Lancaster and
  • Gavin Baxter

26 April 2017

The realisation of employing Additive Layer Manufacturing (ALM) technologies to produce components in the aerospace industry is significantly increasing. This can be attributed to their ability to offer the near-net shape fabrication of fully dense c...

(This article belongs to the Special Issue Selected Papers from SSTT2016)
  • Communication
  • Open Access
9 Citations
4,479 Views
13 Pages

Synthesis of Bulk Zr48Cu36Al8Ag8 Metallic Glass by Hot Pressing of Amorphous Powders

  • Tianbing He,
  • Nevaf Ciftci,
  • Volker Uhlenwinkel and
  • Sergio Scudino

The critical cooling rate necessary for glass formation via melt solidification poses inherent constraints on sample size using conventional casting techniques. This drawback can be overcome by pressure-assisted sintering of metallic glass powders at...

(This article belongs to the Special Issue Powder Metallurgy and Additive Manufacturing/3D Printing of Materials)
  • Article
  • Open Access
39 Citations
6,472 Views
22 Pages

Comparative Analysis of Mechanical Properties: Conventional vs. Additive Manufacturing for Stainless Steel 316L

  • Constantin Alex Sumanariu,
  • Cătălin Gheorghe Amza,
  • Florin Baciu,
  • Mihai Ion Vasile and
  • Adrian Ionut Nicoara

29 September 2024

This research investigates the tensile strength and microstructural properties of stainless steel 316L, comparing samples fabricated using additive manufacturing (AM) to those produced via conventional manufacturing techniques such as forging and cas...

(This article belongs to the Special Issue Additive Manufacturing and Nondestructive Testing of Metals)
  • Article
  • Open Access
16 Citations
6,825 Views
17 Pages

Removal of Stair-Step Effects in Binder Jetting Additive Manufacturing Using Grayscale and Dithering-Based Droplet Distribution

  • Christoph Hartmann,
  • Lucas van den Bosch,
  • Johannes Spiegel,
  • Dominik Rumschöttel and
  • Daniel Günther

26 May 2022

Binder jetting is a layer-based additive manufacturing process for three-dimensional parts in which a print head selectively deposits binder onto a thin layer of powder. After the deposition of the binder, a new layer of powder is applied. This proce...

(This article belongs to the Special Issue Research and Development of Additive Manufacturing Technology)
  • Article
  • Open Access
6 Citations
2,996 Views
22 Pages

Electrospun Polybenzimidazole Membranes: Fabrication and Fine-Tuning Through Physical and Statistical Approaches

  • Emmanuel De Gregorio,
  • Giuseppina Roviello,
  • Valentina Naticchioni,
  • Viviana Cigolotti and ,
  • Alfonso Pozio,
  • Luis Alexander Hein,
  • Carlo De Luca,
  • Claudio Ferone,
  • Antonio Rinaldi and
  • Oreste Tarallo
  • + 5 authors+ 0 author

6 June 2025

Polybenzimidazole (PBI), a high-performance polymer known for its exceptional thermal stability and chemical resistance, was processed by solution electrospinning to manufacture fibrous non-woven membranes. The process was repeated under different co...

(This article belongs to the Special Issue Polymeric Membrane Science and Surface Modification Technologies: 2nd Edition)
  • Article
  • Open Access
14 Citations
3,556 Views
19 Pages

22 June 2020

This paper analyzes the pore morphology of two different concrete mixtures (plain and fiber-reinforced) under two different curing conditions, through the use of a CT scanner and post-processing software. Twelve cylinders of 45.2 mm in diameter and 5...

(This article belongs to the Special Issue Assessment of High-Performance Fiber-Reinforced Concrete Properties)
  • Article
  • Open Access
7 Citations
3,688 Views
31 Pages

10 August 2023

Analysis of aerial images provided by satellites enables continuous monitoring and is a central component of many applications, including precision farming. Nonetheless, this analysis is often impeded by the presence of clouds and cloud shadows, whic...

(This article belongs to the Section Atmospheric Remote Sensing)
  • Article
  • Open Access
9 Citations
4,403 Views
26 Pages

Benchmarking L-PBF Systems for Die Production: Powder, Dimensional, Surface, Microstructural and Mechanical Characterisation

  • Jose Manuel Costa,
  • Elsa Wellenkamp Sequeiros,
  • Ruben Filipe Santos and
  • Manuel Fernando Vieira

29 April 2024

While conventional die manufacturing techniques often lead to limitations in production speed and design intricacy due to labour-intensive procedures like machining and casting, Additive Manufacturing (AM) emerges as a key player offering substantial...

(This article belongs to the Special Issue Laser Processing and Additive Manufacturing of Metallic Materials)
  • Review
  • Open Access
18 Citations
11,655 Views
12 Pages

17-4PH Stainless Steel is a mechanically high-performing alloy that is widely used across chemical and mechanical processing industries. The alloy is conventionally fabricated by cast methods, but emerging additive manufacturing techniques are presen...

  • Communication
  • Open Access
2 Citations
1,847 Views
10 Pages

23 July 2024

HfNbTaTiZr high-entropy alloy has wide application prospects as a biomedical material, and the use of laser additive manufacturing can solve the forming problems faced by the alloy. In view of the characteristics of the one-time forming of additive m...

(This article belongs to the Section D3: 3D Printing and Additive Manufacturing)
  • Article
  • Open Access
1 Citations
1,425 Views
26 Pages

Feasibility of Solvent-Cast PLLA/Iron Composites for Biomedical Applications

  • Jana Markhoff,
  • Philipp Wiechmann,
  • Selina Schultz,
  • Kerstin Lebahn and ,
  • Volkmar Senz,
  • Niels Grabow,
  • Olaf Kessler and
  • Thomas Eickner
  • + 3 authors+ 0 author

Degradable polymers, such as poly(L-lactide) (PLLA), are widely investigated for biomedical applications, including drug delivery systems and temporary implants. Their functionality can be expanded by incorporating degradable metal microparticles tha...

(This article belongs to the Section Polymer Composites)
  • Article
  • Open Access
9 Citations
3,353 Views
21 Pages

Mechanical and Surface Characteristics of Selective Laser Melting-Manufactured Dental Prostheses in Different Processing Stages

  • Edgar Moraru,
  • Alina-Maria Stoica,
  • Octavian Donțu,
  • Sorin Cănănău and ,
  • Nicolae-Alexandru Stoica,
  • Victor Constantin,
  • Daniela-Doina Cioboată and
  • Liliana-Laura Bădiță-Voicu
  • + 3 authors+ 0 author

9 September 2023

Due to the expansion of the use of powder bed fusion metal additive technologies in the medical field, especially for the realization of dental prostheses, in this paper, the authors propose a comparative experimental study of the mechanical characte...

(This article belongs to the Special Issue Recent Advances in Metal Powder Based Additive Manufacturing)
  • Article
  • Open Access
27 Citations
5,216 Views
27 Pages

Effect of Cavitation Erosion Wear, Vibration Tumbling, and Heat Treatment on Additively Manufactured Surface Quality and Properties

  • Sergey N. Grigoriev,
  • Alexander S. Metel,
  • Tatiana V. Tarasova,
  • Anastasia A. Filatova and ,
  • Sergey K. Sundukov,
  • Marina A. Volosova,
  • Anna A. Okunkova,
  • Yury A. Melnik and
  • Pavel A. Podrabinnik
  • + 4 authors+ 0 author

19 November 2020

The paper is devoted to researching various post-processing methods that affect surface quality, physical properties, and mechanical properties of laser additively manufactured steel parts. The samples made of two types of anticorrosion steels—...

(This article belongs to the Special Issue Advances in Laser Materials Processing)
  • Article
  • Open Access
43 Citations
4,942 Views
12 Pages

23 October 2021

This study evaluates the accuracy of drill guides fabricated in medical-grade, biocompatible materials for static, computer-aided implant surgery (sCAIS). The virtually planned drill guides of ten completed patient cases were printed (n = 40) using p...

(This article belongs to the Special Issue 3D Printing and Virtual Surgical Planning in Oral and Maxillofacial Surgery)
  • Review
  • Open Access
2 Citations
775 Views
39 Pages

Laser Processing of Fe-Cr-B Alloys: Microstructure Evolution, Non-Equilibrium Solidification and Wear–Corrosion Performance

  • Lei He,
  • Changle Zhang,
  • Jiang Ju,
  • Zhizu Zhang and ,
  • Jintao Liu and
  • Huajun Zhang
  • + 1 author+ 0 author

30 June 2026

Fe-Cr-B alloys are recognized as candidate wear- and corrosion-resistant materials strengthened by high-hardness boride phases. Conventional casting produces coarse continuous network borides and severe elemental segregation under near-equilibrium sl...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
5 Citations
2,830 Views
8 Pages

28 July 2020

Friction stir processing (FSP) has confirmed its valuable contribution to refining microstructures and the improvement of mechanical properties for Mg-Al alloys. Reference papers illustrate that post-processing aging treatments enhance hardness, but...

(This article belongs to the Special Issue Friction Stir Welding Prospective on Light-Alloys Joints)
  • Article
  • Open Access
5 Citations
4,338 Views
18 Pages

16 October 2018

Selective laser melting process has already been developed for many metallic materials, including steel, aluminum, and titanium. The quasistatic properties of these materials have been found to be comparable or even better than their conventionally-m...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
903 Views
13 Pages

10 October 2025

The Chebei integral Immersed Tunnel introduced an innovative full-section interval casting process, where post-casting belts impose restraint effects on the full-section casting segments. To mitigate concrete cracking, this study investigates the inf...

(This article belongs to the Special Issue The Development of Sustainable Concrete with Solid Waste and By-Products)
  • Review
  • Open Access
1 Citations
2,441 Views
28 Pages

10 April 2026

Selective laser melting (SLM) is an additive manufacturing method based on powder bed fusion that has gained prominence in prosthodontics for its capability to create intricate, patient-specific metal restorations with precision and consistency. SLM...

(This article belongs to the Special Issue Metal 3D Printing Techniques for Biomedical Applications)
  • Article
  • Open Access
86 Citations
6,977 Views
14 Pages

Corrosion Behavior of Heat-Treated AlSi10Mg Manufactured by Laser Powder Bed Fusion

  • Marina Cabrini,
  • Flaviana Calignano,
  • Paolo Fino,
  • Sergio Lorenzi and ,
  • Massimo Lorusso,
  • Diego Manfredi,
  • Cristian Testa and
  • Tommaso Pastore
  • + 3 authors+ 0 author

21 June 2018

This experimental work is aimed at studying the effect of microstructural modifications induced by post-processing heat treatments on the corrosion behavior of silicon-aluminum alloys produced by means of laser powder bed fusion (LPBF). The manufactu...

(This article belongs to the Special Issue Laser Materials Processing)
  • Article
  • Open Access
10 Citations
3,996 Views
11 Pages

Effects of Post-Treatment to Improve the Surface Quality of 3D Printing Cement Mold Casting

  • Seung-Yeop Chun,
  • Geumyeon Lee,
  • Su-jin Kim,
  • Bora Jeong and ,
  • Jeehoon Shin,
  • Inkyung Cho,
  • Hong-Dae Kim,
  • Heesoo Lee and
  • Taewook Kim
  • + 4 authors+ 0 author

13 December 2021

Powder bed 3D printing can be applied to sandcasting mold manufacturing to ensure high quality and economy through process innovation. In this study, refractory alumina cement was used as an aqueous binder to ensure high-temperature thermal stability...

(This article belongs to the Special Issue Advanced Marine Engineering and Technology: Sustainable and Smart Marine Engineering)
  • Article
  • Open Access
4 Citations
2,505 Views
22 Pages

Residual Stress Distribution in Dievar Tool Steel Bars Produced by Conventional Additive Manufacturing and Rotary Swaging Processes

  • Josef Izák,
  • Pavel Strunz,
  • Olena Levytska,
  • Gergely Németh and ,
  • Jan Šaroun,
  • Radim Kocich,
  • Marek Pagáč and
  • Kostyantyn Tuharin
  • + 3 authors+ 0 author

22 November 2024

The impact of manufacturing strategies on the development of residual stresses in Dievar steel is presented. Two fabrication methods were investigated: conventional ingot casting and selective laser melting as an additive manufacturing process. Subse...

(This article belongs to the Special Issue Structural Phenomena in Metallic Materials for Demanding Applications)
  • Article
  • Open Access
8 Citations
5,414 Views
18 Pages

21 September 2022

The common method for producing casting molds for the fabrication of polydimethylsiloxane (PDMS) chips is standard photolithography. This technique offers high resolution from hundreds of nanometers to a few micrometers. However, this mold fabricatio...

(This article belongs to the Special Issue Feature Papers 2021 Editors Collection)
  • Article
  • Open Access
814 Views
19 Pages

Development of an Integrated Radiotherapy Simulation Platform with AI-Driven Segmentation and Ray-Casting-Based Dosimetric Evaluation

  • Cheng-Yen Lee,
  • Hsiao-Ju Fu,
  • Pin-Yi Chiang,
  • Hien Vu-Dinh and ,
  • Hung-Ching Chang and
  • Hong-Tzong Yau
  • + 1 author+ 0 author

Radiotherapy simulation is essential for accurately targeting tumors while preserving healthy tissue, ensuring treatment precision and safety. This study aimed to develop an integrated radiotherapy simulation system capable of automated segmentation,...

(This article belongs to the Special Issue AI Advancements in Healthcare: Medical Imaging and Sensing Technologies, 2nd Edition)
  • Review
  • Open Access
640 Views
21 Pages

Defect Mechanisms and Microstructural Regulation in Be–Al Alloys Across Multiple Fabrication Routes

  • Geng Cao,
  • Shaopeng Wu,
  • Dongxin Wang,
  • Zhaopeng Yang and ,
  • Lipeng Yang and
  • Xixi Su
  • + 1 author+ 0 author

3 August 2026

Be–Al alloys are attractive for aerospace and precision-engineering applications because of their low density, high specific stiffness, and excellent dimensional stability. However, their broader application is constrained by multiscale defects...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
2,640 Views
11 Pages

The Casting and Hot Forging of Low-Carbon Copper-Bearing Steel and Its Substructural Characterization

  • Pawan Kumar,
  • Mamookho Elizabeth Makhatha,
  • Shivashankarayya Hiremath and
  • Vishwanatha H. M.

5 October 2023

The casting of metal alloys followed by hot forging is a widely used manufacturing technology to produce a homogeneous microstructure. The combination of mechanical and thermal energy envisages the microstructural properties of metal alloys. In the p...

(This article belongs to the Section Composites Modelling and Characterization)
  • Review
  • Open Access
56 Citations
8,192 Views
30 Pages

A Review—Additive Manufacturing of Intermetallic Alloys Based on Orthorhombic Titanium Aluminide Ti2AlNb

  • Anatoliy G. Illarionov,
  • Stepan I. Stepanov,
  • Inna A. Naschetnikova,
  • Artemiy A. Popov and ,
  • Prasanth Soundappan,
  • K. H. Thulasi Raman and
  • Satyam Suwas
  • + 2 authors+ 0 author

20 January 2023

Titanium alloys based on orthorhombic titanium aluminide Ti2AlNb are promising refractory materials for aircraft engine parts in the operating temperature range from 600–700 °C. Parts made of Ti2AlNb-based alloys by traditional technologies...

(This article belongs to the Topic Additive Manufacturing: Design, Opportunities, and Applications)
  • Article
  • Open Access
18 Citations
7,859 Views
9 Pages

PLA 3D Printing as a Straightforward and Versatile Fabrication Method for PDMS Molds

  • Guus van der Borg,
  • Harry Warner,
  • Melina Ioannidis,
  • Geert van den Bogaart and
  • Wouter H. Roos

17 March 2023

3D printing is gaining traction in research and development as a way to quickly, cheaply, and easily manufacture polydimethylsiloxane (PDMS) molds. The most commonly used method is resin printing, which is relatively expensive and requires specialize...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
2 Citations
2,267 Views
26 Pages

Epoxy Composites with Post-Production Gray Cast-Iron Powders

  • Robert Cieślak,
  • Paweł Figiel,
  • Konrad Kwiatkowski,
  • Damian Dobrowolski and ,
  • Magdalena Urbaniak and
  • Anna Biedunkiewicz
  • + 1 author+ 0 author

31 August 2024

Processing of cast-iron castings by machining is associated with a large amount of post-production waste in the form of cast-iron chips, which constitute up to about 5% of the weight of the entire casting. In the case of serial production, this gener...

(This article belongs to the Special Issue Utilization and Repurposing of Industrial, Construction and Agricultural Waste and By-Products in Environmental Remediation: An Approach to a Circular Economy)
  • Article
  • Open Access
5 Citations
2,809 Views
21 Pages

Effect of Processing-Induced Oxides on the Fatigue Life Variability of 6082 Al-Mg-Si Alloy Extruded Components

  • Viththagan Vivekanandam,
  • Shubham Sanjay Joshi,
  • Jaime Lazaro-Nebreda and
  • Zhongyun Fan

Aluminium alloy 6082 is widely used in the automotive and aerospace industries due to its high strength-to-weight ratio. However, its structural integrity can sometimes be affected by an early fatigue failure. This study investigates the fatigue perf...

  • Article
  • Open Access
7 Citations
4,314 Views
33 Pages

Ice Accretion: Image Post-Processing Measurement Techniques for 2D Ice Shapes

  • Adriana Enache,
  • Joachim Wallisch,
  • Jeroen van Beeck,
  • Patrick Hendrick and
  • Richard Hann

Ice accretion poses substantial safety hazards for the manned and unmanned aviation industries. Its study is essential for icing events risk assessment and for the development of efficient ice protection systems. The existing ice accretion measuremen...

(This article belongs to the Special Issue Deicing and Anti-Icing of Aircraft (Volume III))
  • Article
  • Open Access
767 Views
29 Pages

Mesoscopic Heterogeneous Modeling Method for Polyurethane-Solidified Ballast Bed Based on Virtual Ray Casting Algorithm

  • Yang Xu,
  • Zhaochuan Sheng,
  • Jingyu Zhang,
  • Hongyang Han and ,
  • Xing Ling,
  • Xu Zhang and
  • Luchao Qie
  • + 2 authors+ 0 author

24 January 2026

This study introduces a mesoscale modeling methodology for polyurethane-solidified ballast beds (PSBBs) that eliminates reliance on X-ray computed tomography (XCT) and addresses constraints in specimen size, capital cost, and post-processing complexi...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
2 Citations
4,514 Views
18 Pages

The Microstructure and Magnetic Properties of a Soft Magnetic Fe-12Al Alloy Additively Manufactured via Laser Powder Bed Fusion (L-PBF)

  • Torsten Kunert,
  • Thomas Kresse,
  • Frederik Fohr,
  • Niklas Volbers and ,
  • Gerhard Schneider and
  • Dagmar Goll
  • + 1 author+ 0 author

18 January 2024

Soft magnetic Fe-Al alloys have been a subject of research in the past. However, they never saw the same reception in technical applications as the Fe-Si or Fe-Ni alloys, which is, to some extent, due to a low ductility level and difficulties in manu...

(This article belongs to the Section Additive Manufacturing)

of 4