Skip to Content

100 Results Found

  • Systematic Review
  • Open Access
201 Views
39 Pages

Aggregate Interlock Degradation to Shear Behaviour of FRP-Reinforced Recycled Aggregate Concrete Members: A Critical Review

  • Chowdhury Zubayer Bin Zahid,
  • Thanongsak Imjai,
  • Reyes Garcia,
  • Aziz Hasan Mahmood and
  • U. Johnson Alengaram

24 October 2026

This review critically examines the shear behaviour of fibre-reinforced polymer (FRP)–reinforced recycled aggregate concrete (RAC) members, with particular emphasis on the role of aggregate interlock degradation in governing shear transfer mech...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
21 Citations
5,188 Views
24 Pages

18 June 2020

The intention of this paper is to clarify the mechanisms of mixed mode fracture and shear stress transfer in plain concrete. To capture these scarcely explored phenomena, a new mechanical formulation is proposed called the fictitious rough crack mode...

  • Article
  • Open Access
4 Citations
3,136 Views
19 Pages

Performance of Ore Sand as Aggregate for Interlocking Blocks

  • Rodrigo Beck Saldanha,
  • Mariana Figueira Lacerda Menezes,
  • Rafael Jabur Bittar and
  • Nilo Cesar Consoli

20 December 2023

The search for alternatives that can replace conventional materials extracted from nature is crucial for environmental sustainability. This is especially the case for construction and geotechnical engineering, as this sector is a major consumer of th...

(This article belongs to the Special Issue Sustainability in Geotechnics)
  • Article
  • Open Access
14 Citations
10,190 Views
15 Pages

14 January 2021

Considering the advantages of energy conservation and reducing the construction skill requirement of the workers, a new type of interlocking hollow block using recycled aggregates concrete (IHB-RAC) with the compressive strength up to 10 Mpa was prop...

  • Article
  • Open Access
2 Citations
2,201 Views
18 Pages

17 January 2026

The contraction joints within paver runs are important for the design and construction of rigid aircraft pavements. These joints are typically un-doweled and sawn into the pavement to induce a crack. The joints control shrinkage cracking during curin...

(This article belongs to the Special Issue Modeling and Mechanical Analysis of Materials and Structures in Civil Engineering)
  • Article
  • Open Access
4 Citations
7,380 Views
18 Pages

23 October 2023

In this study, an experiment was conducted to innovate a new design of interlocking concrete blocks (ICBs) containing recycled aggregates (RAs) by reducing the consumed time and cost in construction using an environmental approach. Accordingly, the d...

(This article belongs to the Special Issue Sustainable Development: Recycle and Reuse of Waste Materials in Construction Industry)
  • Article
  • Open Access
13 Citations
2,358 Views
15 Pages

29 June 2023

Particle media are widely used in engineering and greatly influence the performance of engineering materials. Asphalt mixtures are multi-phase composite materials, of which coarse aggregates account for more than 60%. These coarse aggregates form a s...

(This article belongs to the Special Issue Performance-Related Material Properties of Asphalt Mixture Components (Second Edition))
  • Article
  • Open Access
34 Citations
5,359 Views
16 Pages

30 March 2021

The determination of the ultimate shear capacity and the identification of the corresponding load-carrying mechanisms of concrete members without shear reinforcement has been an ongoing research topic for over 100 years. Based on a full mechanical mo...

(This article belongs to the Special Issue Recent Advances in Testing and Modelling Reinforced Concrete Structures)
  • Article
  • Open Access
9 Citations
3,531 Views
18 Pages

18 June 2020

High-performance pumping concrete has been widely used in high-rise building construction because of its superior qualities. However, early cracking problems can occur in cast-in-place pumping concrete, which is due to the excessive use of cement. In...

  • Article
  • Open Access
20 Citations
3,269 Views
18 Pages

Sustainable and Low-Cost Hemp FRP Composite Confinement of B-Waste Concrete

  • Panuwat Joyklad,
  • Ekkachai Yooprasertchai,
  • Abdur Rahim,
  • Nazam Ali and ,
  • Krisada Chaiyasarn and
  • Qudeer Hussain
  • + 1 author+ 0 author

23 June 2022

Each year, massive amount of construction waste is generated that needs proper attention in terms of its disposal without deteriorating surrounding environment. A significant portion of this waste comprises bricks. Besides, large number of new constr...

(This article belongs to the Special Issue Recycled Construction & Demolition Waste as Concrete Aggregate for Sustainable Construction)
  • Article
  • Open Access
26 Citations
5,044 Views
23 Pages

Effect of Recycled Aggregate Quality on the Bond Behavior and Shear Strength of RC Members

  • Thanapol Yanweerasak,
  • Theang Meng Kea,
  • Hiroki Ishibashi and
  • Mitsuyoshi Akiyama

25 October 2018

During the aggregate crushing process, natural aggregate and clinging mortar from existing concrete will inevitably produce small cracks and weak bonds between the aggregate and the existing cement mortar. The weaknesses of the existing cement mortar...

(This article belongs to the Special Issue New Trends in Recycled Aggregate Concrete)
  • Article
  • Open Access
2 Citations
4,945 Views
11 Pages

An Environmental Assessment of Interlocking Concrete Blocks Mixed with Sugarcane Residues Produced in Okinawa

  • Bruno Ribeiro,
  • Tadaaki Uchiyama,
  • Jun Tomiyama,
  • Takashi Yamamoto and
  • Yosuke Yamashiki

The use of sugarcane residues in mortar and concrete is believed to contribute to the reduction of environmental problems, such as the reduction of mining of natural aggregates as well as the improper disposal of sugarcane residues. Therefore, in thi...

  • Article
  • Open Access
4 Citations
1,095 Views
17 Pages

Effect of Aggregate and Void Characteristics on Shear Resistance of Asphalt Mixtures

  • Yuanzhuo Yu,
  • Wenyuan Huang,
  • Mutian Sun,
  • Xiaobo Du and
  • Hongwei Lin

28 October 2025

Shear strength plays a critical role in the rutting resistance of asphalt pavements. In this study, a three-dimensional discrete element method (DEM) model was developed in PFC3D to systematically investigate the effects of aggregate and void charact...

(This article belongs to the Section Materials Processes)
  • Article
  • Open Access
6 Citations
2,648 Views
20 Pages

Material Recycling for Manufacturing Aggregates Using Melting Slag of Automobile Shredder Residues

  • Soo-Jin Cho,
  • Ha-Na Jang,
  • Sung-Jin Cho,
  • Young-Sam Yoon and
  • Heung-Min Yoo

27 March 2023

The quantity of waste from end-of-life vehicles is increasing with an increase in the number of scrapped internal combustion engine vehicles owing to international trends such as carbon neutrality and particulate matter reduction. The recycling rate...

(This article belongs to the Topic Environmental Sensitivity and Safety Assessment of Materials)
  • Article
  • Open Access
18 Citations
5,484 Views
16 Pages

Effect of Fine Aggregates and Mineral Fillers on the Permanent Deformation of Hot Mix Asphalt

  • Noman Khan,
  • Fazli Karim,
  • Qadir Bux Alias Imran Latif Qureshi,
  • Sameer Ahmad Mufti and ,
  • Muhammad Babar Ali Rabbani,
  • Muhammad Siyab Khan and
  • Diyar Khan
  • + 2 authors+ 0 author

6 July 2023

Conventional asphalt pavement is the dominant mode of passenger and freight traffic in Pakistan. As a result, asphalt pavements suffer from various failures, where rutting, corrugation, and fatigue cracking are significant. Fine aggregates and minera...

(This article belongs to the Special Issue Waste to Value – Use of Innovative Green Materials in the Construction of Transportation Infrastructure)
  • Article
  • Open Access
15 Citations
5,193 Views
19 Pages

8 September 2019

This study used the Source Loading and Management Model for Windows (WinSLAMM) to develop a set of calibrated hydrologic models for three types of regional permeable pavements—porous concrete pavement (PCP), permeable interlocking concrete pave...

(This article belongs to the Section Urban Water Management)
  • Article
  • Open Access
8 Citations
3,826 Views
28 Pages

2 August 2021

The interlocking and packing of aggregate particles play a key role in achieving high level of linear viscoelastic properties and rutting resistance in asphalt mix for sustainable pavements. In this study, the quantitative effect of fractured aggrega...

(This article belongs to the Special Issue Pavement Design, Analysis and Material Characterization)
  • Article
  • Open Access
19 Citations
12,374 Views
11 Pages

3 September 2014

Permeable interlocking concrete pavements (PICP) are specifically designed to remove sediment and other pollutants from stormwater runoff. Over time, this can lead to clogging of the PICP system. Previous research has shown that much of the clogging...

  • Article
  • Open Access
21 Citations
4,249 Views
17 Pages

13 April 2022

Fine aggregate and cement have been partially replaced by 10% and 56% crumb rubber and class F-fly ash, respectively, in order to manufacture rubberized concrete interlocking bricks (RCIBs). The newly developed product has been used for masonry const...

(This article belongs to the Special Issue Composite Systems for Strengthening and Rehabilitation of Concrete and Masonry Structures)
  • Article
  • Open Access
18 Citations
6,611 Views
17 Pages

Sustainability Assessment of Using Recycled Aggregates in Concrete Block Pavements

  • Md Mizanur Rahman,
  • Simon Beecham,
  • Asif Iqbal,
  • Md Rajibul Karim and
  • Abu Taher Zillur Rabbi

25 May 2020

The mechanistic design of a concrete block pavement (CBP) can be very complicated and often requires the use of computer programs. This paper presents a new mechanistic-empirical method, which is implemented in a computer program (DesignPave) that ca...

(This article belongs to the Special Issue Urban Sustainability: Pavement Design, Construction and Environment)
  • Article
  • Open Access
18 Citations
2,571 Views
23 Pages

Incorporation of Steel Fibers to Enhance Performance of Sustainable Concrete Made with Waste Brick Aggregates: Experimental and Regression-Based Approaches

  • Ekkachai Yooprasertchai,
  • Alireza Bahrami,
  • Panumas Saingam,
  • Qudeer Hussain and ,
  • Ali Ejaz and
  • Panuwat Joyklad
  • + 1 author+ 0 author

10 November 2023

Each year, an enormous amount of construction waste is produced worldwide. The reuse of construction waste in construction works is a sustainable solution. The present research work utilized recycled brick aggregates in the production of concrete. Th...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
2,079 Views
13 Pages

Synergistic Improvement of Strength Characteristics in Recycled Aggregates Using Nano-Clay and Polypropylene Fiber

  • Tieyong Zhao,
  • Chenjun Wang,
  • De Zhang,
  • Yanfei Yu and ,
  • Jiale Luo and
  • Cuihong Li
  • + 1 author+ 0 author

30 January 2024

In order to study the improvement effect of nano-clay and polypropylene fiber on the mechanical properties of recycled aggregates, unconfined compression tests and triaxial shear tests were conducted. The experimental results show that adding polypro...

(This article belongs to the Special Issue Polymeric Composites in Road and Bridge Engineering: Characterization, Production and Application II)
  • Article
  • Open Access
272 Views
28 Pages

CBR-Based Skeleton Optimization for the Volumetric Design of Porous Asphalt Mixtures

  • Jixing Jie,
  • Xiaoquan Xiao,
  • Qing Wang,
  • Jian Li and ,
  • Yuling Zhang and
  • Bo Chen
  • + 1 author+ 0 author

19 September 2026

Porous asphalt concrete (PAC) relies on coarse- aggregate interlocking, but existing design methods lack quantitative skeleton evaluation and may introduce volumetric conversion errors. This study proposes a method combining California Bearing Ratio...

(This article belongs to the Special Issue Material Characterization, Design and Modeling of Asphalt Pavements)
  • Article
  • Open Access
5 Citations
1,380 Views
14 Pages

China generates substantial construction and demolition (C&D) waste, owing to rapid urbanization. However, the resource utilization rate of C&D waste remains low. This work is devoted to promoting the application of C&D waste in reinforce...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
2 Citations
1,172 Views
25 Pages

5 October 2025

This study explored the feasibility of utilizing tunnel muck-derived recycled granite aggregates (RGAs) in surface-layer asphalt mixtures via hybrid with basalt aggregates. Firstly, RGAs, including coarse aggregates (RGCAs) and fine aggregates (RGFAs...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
7 Citations
2,367 Views
18 Pages

8 August 2024

This study introduces a novel method for particle abrasion derived from fundamental natural phenomena and mechanical principles, allowing precise control over the degree of abrasion and more accurately mimicking natural processes. The method’s...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
2 Citations
2,113 Views
14 Pages

Experimental Research on Gradation Range and Performance of SMAC13

  • Qianqian Zhen,
  • Weidong Cao,
  • Rui Dong,
  • Shutang Liu and ,
  • Ning Liu,
  • Zunhao Zhan and
  • Yingjian Li
  • + 2 authors+ 0 author

2 June 2024

Stone matrix asphalt and asphalt concrete mixture with 13.2 mm nominal maximum aggregate size (named SMA13 and AC13, respectively) are widely used in the surface course of asphalt pavement in China. Generally, the pavement performance of SMA13 is sup...

  • Article
  • Open Access
3 Citations
1,337 Views
17 Pages

Experimental Investigation of the Effect of Nano Silica Fume on Durability of Concrete with Close-Packing Aggregate

  • Zilong Ye,
  • Xin Qu,
  • Jiajun Li,
  • Tianhao Ye and ,
  • Gengying Li and
  • Haiyang Wang
  • + 1 author+ 0 author

29 August 2025

Achieving the close packing and interlocking of coarse aggregates in concrete enhances the elastic modulus, thereby reducing deformation, and can improve the overall stiffness of concrete structures. This study focuses on reinforcing and toughening c...

(This article belongs to the Special Issue Advanced Cement-Based Composite Materials and Composite Intelligent Design)
  • Article
  • Open Access
11 Citations
3,154 Views
21 Pages

Study of the Failure Mechanism of Mortar Rubble Using Digital Image Correlation, Acoustic Emission and Scanning Electron Microscopy

  • Zhao-Qi Li,
  • Hongyun Chen,
  • Jie Dong,
  • Xin Yan and ,
  • Shi-Rong Zhao,
  • Ying-Hao Zheng and
  • Yang Liu
  • + 2 authors+ 0 author

27 August 2022

This paper describes an extensive experimental study of the compressive failure of different types of aggregates and the influence of aggregate type on the interfacial properties of mortars. Interfacial debonding was the main failure mode of mortar r...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
10 Citations
3,210 Views
14 Pages

23 April 2022

Alkali-activated composites of lightweight aggregates (LWAs, with beneficial insulating properties) and alkali-activated foams (AAFs, higher added value products due to their production from waste materials at well below 100 °C) allow for the exp...

(This article belongs to the Special Issue Geopolymer Composite)
  • Article
  • Open Access
405 Views
34 Pages

29 June 2026

To address the rapid polishing and premature loss of skid resistance in conventional asphalt friction courses, as well as the weak bonding between waste ceramic aggregates and asphalt that compromises raveling resistance, this study developed a ceram...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
15 Citations
9,216 Views
12 Pages

Development of Interlocking Concrete Blocks with Added Sugarcane Residues

  • Bruno Ribeiro,
  • Tadaaki Uchiyama,
  • Jun Tomiyama,
  • Takashi Yamamoto and
  • Yosuke Yamashiki

25 September 2020

The use of sugarcane residues in mortar and concrete is believed to contribute to a reduction of costs and environmental problems, such as the reduction of mining of natural aggregates and incorrect disposal of the sugarcane residues. Bagasse fiber h...

(This article belongs to the Special Issue Natural Fibers and Composites: Science and Applications)
  • Essay
  • Open Access
10 Citations
3,607 Views
16 Pages

22 April 2022

Polyamide 66 microporous membranes were prepared by cold non-solvent-induced phase separation using polyamide 66-formic acid-propylene carbonate as a ternary membrane-forming system. The formed membranes exhibited a special bicontinuous structure con...

(This article belongs to the Special Issue Advanced Polymer Membranes for Adsorption and Separation Applications)
  • Article
  • Open Access
29 Citations
4,716 Views
21 Pages

Monitoring Shear Behavior of Prestressed Concrete Bridge Girders Using Acoustic Emission and Digital Image Correlation

  • Fengqiao Zhang,
  • Gabriela I. Zarate Garnica,
  • Yuguang Yang,
  • Eva Lantsoght and
  • Henk Sliedrecht

1 October 2020

In the Netherlands, many prestressed concrete bridge girders are found to have insufficient shear–tension capacity. We tested four girders taken from a demolished bridge and instrumented these with traditional displacement sensors and acoustic...

(This article belongs to the Special Issue Innovative Sensors for Civil Infrastructure Condition Assessment)
  • Article
  • Open Access
8 Citations
2,283 Views
26 Pages

Development and Road Performance Verification of Aggregate Gradation for Large Stone Asphalt Mixture

  • Yufeng Bi,
  • Minghao Mu,
  • Lujun Zeng,
  • Tingting Ding and ,
  • Chengduo Qian,
  • Deshui Yu and
  • Yingjun Jiang
  • + 2 authors+ 0 author

22 November 2024

The pavement base and subbase are the main load-bearing structures of asphalt pavement, and their materials need to have sufficient bearing capacity. Therefore, in the development of LSAM-50 mixtures with higher bearing capacity, after significant re...

  • Review
  • Open Access
73 Citations
12,419 Views
41 Pages

The Use of Recycled Tire Rubber, Crushed Glass, and Crushed Clay Brick in Lightweight Concrete Production: A Review

  • Sherif H. Helmy,
  • Ahmed M. Tahwia,
  • Mohamed G. Mahdy,
  • Mohamed Abd Elrahman and ,
  • Mohammed A. Abed and
  • Osama Youssf
  • + 1 author+ 0 author

25 June 2023

Worldwide, vast amounts of waste are produced every year and most waste is sent directly to landfills or burnt, which has severe and harmful impacts on the environment. Recycling waste materials is considered the most visible solution to protect the...

(This article belongs to the Section Sustainable Engineering and Science)
  • Article
  • Open Access
10 Citations
2,949 Views
16 Pages

6 May 2021

To provide a new method for the evaluation of the compaction quality of asphalt mixture, a real-time data acquisition and processing system (RDAPS) for the motion state of aggregate with a small volume and high precision is developed. The system cons...

(This article belongs to the Special Issue Structural Health Monitoring for Civil Engineering Materials)
  • Article
  • Open Access
35 Citations
3,314 Views
18 Pages

Gradual Meso-Structural Response Behaviour of Characteristics of Asphalt Mixture Main Skeleton Subjected to Load

  • Liwan Shi,
  • Zhen Yang,
  • Duanyi Wang,
  • Xiao Qin and ,
  • Xin Xiao and
  • Masley Kwaku Julius
  • + 1 author+ 0 author

14 June 2019

In order to provide a reference for the gradation design of dense skeleton asphalt mixtures (DSAM), this study conducts a thorough analysis of the gradual meso-structural response behaviour of characteristics of the asphalt mixture main skeleton subj...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
1 Citations
876 Views
22 Pages

Utilization and Sustainability Evaluation of Steel Slag and RAP in Hot Recycled Asphalt Mixtures—Case Study

  • Liang Song,
  • Zijie Xie,
  • Jie Gao,
  • Chong Gao and ,
  • Le Wang and
  • Mingwen Tao
  • + 1 author+ 0 author

20 March 2026

To address natural aggregate scarcity and improve the high-value utilization of Reclaimed Asphalt Pavement (RAP), this study proposes a steel slag–RAP hot recycled asphalt mixture (SSRM) as a sustainable alternative to conventional limestone&nd...

(This article belongs to the Special Issue Sustainable and Eco-Friendly Concrete: Innovations in Green Binders and Recycled Materials)
  • Article
  • Open Access
1 Citations
424 Views
28 Pages

1 July 2026

This study investigates the effect of coal gangue aggregate fractal gradation on the dynamic mechanical behavior and impact failure mechanism of cemented coal gangue backfill composites. Four aggregate gradations with different mass fractal dimension...

  • Article
  • Open Access
6 Citations
5,185 Views
16 Pages

13 September 2020

Rare nickel hydroxide-hydroxyl carbonate, theophrastite (Ni(OH)2)-zaratite (Ni3(CO3)(OH)4·4H2O) aggregates were found from a partially serpentinized dunite from Fujiwara, the Sanbagawa metamorphic belt of high-pressure intermediate type, Japan...

(This article belongs to the Section Mineral Geochemistry and Geochronology)
  • Article
  • Open Access
8 Citations
3,686 Views
19 Pages

3 November 2020

Concrete pavements are characterized by their high durability and low conservation costs. However, concrete production causes large amounts of harmful emissions. In this context, short slab pavements allow us to reduce the slab thickness and the amou...

(This article belongs to the Section Sustainable Engineering and Science)
  • Review
  • Open Access
68 Citations
9,745 Views
34 Pages

State-of-the-Art Review on Permanent Deformation Characterization of Asphalt Concrete Pavements

  • Rouba Joumblat,
  • Zaher Al Basiouni Al Masri,
  • Ghazi Al Khateeb,
  • Adel Elkordi and ,
  • Abdel Rahman El Tallis and
  • Joseph Absi
  • + 1 author+ 0 author

8 January 2023

Rutting is one of the significant distresses in flexible pavements. Examining the methods to decrease permanent deformation is of considerable importance to provide long service life and safe highways. The main objective of this paper is to undertake...

(This article belongs to the Special Issue Sustainable Development of Pavement Materials, Design, and Road Construction Technologies)
  • Article
  • Open Access
480 Views
20 Pages

17 June 2026

Flexible base layers can improve deformation compatibility and reduce reflective cracking in asphalt pavements, but conventional graded crushed stone is limited by weak interparticle bonding, poor water stability, and insufficient resistance to perma...

(This article belongs to the Special Issue Design, Control, and Evaluation of Advanced Engineered Materials—2nd Edition)
  • Article
  • Open Access
5 Citations
3,814 Views
17 Pages

28 January 2025

Aggregate interlocking and dowel bar systems are the two primary mechanisms in a jointed plain concrete pavement for transferring the wheel loads from the loaded slab to the adjacent unloaded slab, avoiding critical stresses and excessive deformation...

(This article belongs to the Special Issue Artificial Intelligence in Materials Science and Engineering)
  • Proceeding Paper
  • Open Access
4 Citations
2,529 Views
5 Pages

Design and Evaluation of Ultra-Thin Overlay with High Viscosity and High Elasticity

  • Yijia Chen,
  • Zhi Liao,
  • Lide Chen,
  • Tao Ma and ,
  • Susan Tighe and
  • Ningyuan Li
  • + 1 author+ 0 author

Ultra-thin asphalt overlay, which is considered one of the main pavement maintenance strategies, has been widely used to maintain and restore pavements. However, the structural properties of traditional ultra-thin overlay materials, such as anti-fric...

(This article belongs to the Proceedings of The Second International Conference on Maintenance and Rehabilitation of Constructed Infrastructure Facilities (MAIREINFRA2))
  • Article
  • Open Access
15 Citations
7,924 Views
24 Pages

4 August 2020

Early Neolithic lifeways in North China, which are marked by a low-level food production economy, population aggregation, and sedentism, thrived just after the period of a climatic cooling event at 8.2 ka. Instead of simply regarding this climate flu...

(This article belongs to the Special Issue Advances in East Asian Agricultural Origins Studies: The Pleistocene to Holocene Transition)
  • Article
  • Open Access
11 Citations
6,661 Views
23 Pages

In this article, the issue of constructing slabs from unified small elements, which are connected together into a stable structure by topological interlocking, is considered. The state-of-the-art methods in this topic are presented, as well as the re...

(This article belongs to the Section Building Structures)
  • Feature Paper
  • Article
  • Open Access
22 Citations
7,253 Views
13 Pages

Paving blocks are today a popular paving solution for urban surfaces. Considering the wide variety of products currently on the market, it is possible to build pavements that differ in terms of functionality, bearing capacity, skid resistance, visual...

(This article belongs to the Special Issue Recent Advances and Future Trends in Pavement Engineering)
  • Article
  • Open Access
3 Citations
1,432 Views
24 Pages

22 August 2025

To reduce reflective cracking in asphalt pavements, gravel base layers are commonly employed to disperse stress and delay structural damage. However, the loose nature of gravel bases results in complex interlayer contact conditions, typically involvi...

(This article belongs to the Section Construction and Building Materials)

of 2