Concretes with engineered thermal expansion coefficients, capable of avoiding failure or irreversible destruction of structures or devices, are important for civil engineering applications, such as dams, bridges, and buildings. In natural materials,...
This paper presents a novel resin concrete obtained by adding cubic zirconium tungstate (ZrW2O8) as filler. A prediction algorithm on the thermal expansion coefficient (CTE) of resin concrete (including filler) was established on the basis of the me...
Addressing the issue of cracking in laser-cladding Ni-based composite coatings with WC particles, this study explored an approach to fabricating a crack-free coating by incorporating ZrW2O8 powder. The influence of varying ZrW2O8 contents on the crac...
In the presented work, the effect of friction stir processing admixing the zirconium tungstate ZrW2O8 powder on the microstructure, mechanical and tribological properties of the AA5056 Al-Mg alloy stir zone has been studied. The FSP resulted in obtai...
Molybdenum-doped zirconium tungstate (ZrW2−xMoxO8) has been widely studied because of its large isotropic coefficient of negative thermal expansion (NTE). However, low density and poor sinterability limit its production and application. In this...
In this study, we report a low-temperature approach involving a combination of a sol–gel hydrothermal method and spark plasma sintering (SPS) for the fabrication of cubic phase ZrW2−xMoxO8 (0.00 ≤ x ≤ 2.00) bulk ceramics. The cubic-...
A flame spray pyrolysis (FSP) method has been developed, for controlled doping of BiVO4 nanoparticles with W and Zr in tandem with the oxygen vacancies (Vo) of the BiVO4 lattice. Based on XPS and Raman data, we show that the nanolattice of W-BiVO4 an...
Polymer matrix composites (PMCs) have been prepared having a polyethersulfone (PES) matrix loaded with polytetrafluoroethylene (PTFE) particles coated with negative thermal expansion zirconium tungstate (ZT) with an aim to reduce the thermal mismatch...
The aim of this study is to investigate the structure–property relationship of the zirconium tungstate-reinforced casted A356 aluminum alloy. The reinforcement ceramic used was zirconium tungstate of the negative thermal coefficient type, which...
The microstructure and mechanical properties of pure W, sintered and swaged W-1.5ZrO2 composites after 1.5 × 1015 Au+/cm2 radiation at room temperature were characterized to investigate the impact of the ZrO2 phase on the irradiation resistance...
The hydrolysis of the iron-binding blood plasma glycoprotein transferrin (Tf) has been examined at pH = 7.4 in the presence of a series of Zr-substituted polyoxometalates (Zr-POMs) including Keggin (Et2NH2)10[Zr(PW11O39)2]∙7H2O (Zr-K 1:2), (Et2NH2)8[...
In this paper, for the application to multi-layer piezoelectric devices capable of being used in piezoelectric speakers, Pb(Ni1/3Nb2/3)O3-Pb(Zr,Ti)O3-BiFeO3 ceramics substituted with Pb(Mg1/2W1/2)O3 were manufactured according to MnO2 addition, and t...
In this paper, in order to develop composition ceramics for an acoustic emission sensor application for nondestructive testing, Pb(Ni,Nb2/3)O3-Pb(Zr,Ti)O3-Pb(Mg,W)O3 [PNN-PZT-PMW] system ceramics were manufactured by conventional mixed oxide method u...
Oxide-dispersion-strengthened (ODS) steel is considered as a promising candidate structural material for nuclear applications. In this study, the microstructure and mechanical properties of Y4Zr3O12-added Fe–13.5Cr–2W ODS steels, containi...
Zirconia (ZrO2)-based flame retardant coatings were synthesized through the process of grinding, mixing, and curing. The flame retardant coatings reinforced with zirconia nanoparticles (ZrO2 NPs) were prepared at four different formulation levels mar...
In this work, a thin film transistor (TFT) with Zr-doped aluminum-zinc-tin oxide (Zr-AZTO) semiconductor as active layer was investigated. The Zr-AZTO thin films were co-sputtered by ZrO2 and AZTO targets (RF-Sputter) in Ar, and annealed at 350 °...
Thermodynamic calculations were carried out on typical tungsten cathode materials using Factsage software within a temperature range of 1000–3400 °C. The relationship between the phase stability and electron emission performance of the cath...
This work systematically investigates the impact of a pre-annealed ZrO2 interfacial layer on the ferroelectric behavior of Hf0.5Zr0.5O2 (HZO) capacitors. The remanent polarization (2Pr) value of HZO capacitors, including configurations such as W/HZO/...
The interaction between human serum albumin (HSA) and a series of Zr(IV)-substituted polyoxometalates (POMs) (Lindqvist type POM ((nBu4N)6[{W5O18Zr (μ-OH)}2]·2H2O, Zr2-L2), two Keggin type POMs ((Et2NH2)10[Zr(PW11O39)2]·7H2O, Zr1-K2 and (Et2NH2)8[{...
Hydroxyapatite (HA) is one of the most commonly used materials for the coating of bioceramic titanium (Ti) alloys. However, HA has poor mechanical properties and a low bonding strength. Accordingly, the present study replaces HA with a composite coat...
ZrO2 nanoparticles, ZrO2 (P) and ZrO2 (H), with different tetragonal phase contents, were prepared. ZrO2 (P) possessed higher tetragonal phase content than ZrO2 (H). Ni/ZrO2 catalysts (10% (w/w)), using ZrO2 (P) and ZrO2 (H) as supports, were prepare...
Recently, the resource utilization of agricultural biomass wastes for the preparation of a wide range of high-value-added chemicals and functional materials, especially heterogeneous catalysts, has received extensive attention from researchers. In th...
In this study, the bimetallic Ni-Zr MOF-derived nickel-zirconium oxide (Ni-Zr-O)-impregnated silicotungstic acid (HSiW) nanocomposite catalyst (HSiW@Ni-Zr-O) was prepared via a hydrothermal procedure followed by a pyrolysis treatment, and its structu...
A series of Sc-doped ZrO2 supports, with Sc2O3 content in the range of 0 to 7.5% (mol/mol), were prepared using the hydrothermal method. Ni/Sc-doped ZrO2 catalysts with nickel loading of 10% (w/w) were prepared using impregnation method, and characte...
Ice accretion is a significant drawback in an aircraft’s and wind turbine’s aerodynamic performance in cold climate weather. Plasma actuators are an attractive technology for ice removal; however, dielectric barriers are typically restric...
The influence of boron, tungsten and molybdenum modifiers on zirconia-based Pt catalyst was studied for glycerol valorization. Zirconia modified supports were prepared by impregnation of ZrO2 with either boric, silicontungstic or phosphomolybdic acid...
The direct borohydride fuel cell (DBFC) is a low-temperature fuel cell that requires the development of affordable price and efficient proton exchange membranes for commercial purposes. In this context, super-acidic sulfated zirconia (SO4ZrO2) was em...
Fe2−xCuxZr2−xWxO7 (x: 0, 0.05, 0.015) nanoparticles were synthesized following the Pechini method and characterized via X-ray diffraction (XRD), transmission electron microscopy (TEM), and diffuse reflectance spectroscopy (DRS) measuremen...
For scaling-down advanced nanoscale semiconductor devices, tungsten (W)-film surface chemical mechanical planarization (CMP) has rapidly evolved to increase the W-film surface polishing rate via Fenton-reaction acceleration and enhance nanoscale-abra...
VO2-based film, as a very promising thermochromic material for smart windows, has attracted extensive attention but has not been widely applied because it is difficult to simultaneously improve in terms of both solar-modulation efficiency (ΔTso...
The MoSi2-ZrB2 coatings were prepared on Nb-Si based alloy by atmospheric plasma spraying with the spraying power 40, 43 and 45 kW. The effect of spraying power on the microstructure and oxidation resistance of MoSi2-ZrB2 coating at 1250 °C were...
In the future, it will become increasingly important to recover critical elements from waste materials. For many of these elements, purely mechanical processing is not efficient enough. An already established method is pyrometallurgical processing, w...
A tungsten (W) material is a candidate for the first wall and silicon carbide (SiC) composites are candidates for the structural materials applied in nuclear fusion. SiC fiber-reinforced W composites are also developed for nuclear fusion applications...
A series of ZrO2-supported WOx catalysts were prepared using atomic layer deposition (ALD) with W(CO)6, and were then compared to a WOx/ZrO2 catalyst prepared via conventional impregnation. The types of sites present in these samples were characteriz...
Five kinds of multi-component entropy-stabilized oxide ceramics were prepared by a solid-state reaction method for thermal barrier coatings, namely La0.125Y0.125Yb0.125Gd0.125Zr0.5O1.75 (LaYYbGdZr), Y0.125Yb0.125Gd0.125Ta0.125Zr0.5O1.875 (YYbGdTaZr),...
In order to improve the high temperature oxidation and ablation resistance of C/C composites, ZrB2-ZrC-SiC ultra-high temperature composite ceramic coatings were prepared on C/C composites by laser cladding using Zr, B4C, and Si as raw materials. The...
TiO2 shows improved photocatalytic properties when combined with other oxides, such as ZrO2. Unfortunately, this material does not exhibit a spectral response in the visible range, but this can be improved by adding WO3. Here, the effect of the amoun...
Designing phosphors that are excited by blue light is extraordinarily important for white light-emitting diodes (w-LEDs). In the present study, a new Ruddlesden–Popper type of SZO:xEu3+ (x = 0.01~0.10) phosphors was developed using solid-state...
An in-situ chemical oxidative method was used to effectively synthesize a promising supercapacitor material based on PPy/ZrO2 composites. The synthesized materials were characterized by different analytical techniques, such as UV/visible (UV/Vis) spe...
Taking advantage of the ionic size and mass disorder as component design criteria, three novel high-entropy rare-earth zirconate ceramics, including (Sm0.2Gd0.2Dy0.2Er0.2Tm0.2)2Zr2O7, (Gd0.2Dy0.2Ho0.2Er0.2Tm0.2)2Zr2O7 and (Gd0.2Dy0.2Ho0.2Er0.2Yb0.2)2...
In order to solve the challenge that battery performance rapidly deteriorates at a high temperature condition of 100 °C or higher, ZrO2-TiO2 (ZT) with various Zr:Ti ratios synthesized by a sol-gel method were impregnated in a Nafion membrane. Thr...
Iron-based soft magnetic composites (SMCs) are the key components of high-frequency electromagnetic systems. Selecting a suitable insulating oxide layer and ensuring the integrity and homogeneity of the heterogeneous core–shell structure of SMC...
Flexible La-doped Sm2Zr2O7/polyurethane (PU) coated leather composites were synthesized using a one-step hydrothermal method, with highly efficient photocatalytic degradation properties by coating the La-doped Sm2Zr2O7/PU emulsion onto the leather an...
Ultra-high-strength paste (UHSP) combined with nanomaterials has been extensively studied. However, the research on nano-ZrO2 is limited. In this study, UHSP with various nano-ZrO2 contents is analyzed. The motivation of this study is to clarify the...
The nanocomposite Zr-B-O films based on ZrB2 and ZrO2 are successfully deposited on Si (100) and stainless-steel substrates via a multi-target magnetron co-sputtering system. The influence of the sputtering power of ZrB2 target on sample structure an...
Bioethanol, which is currently produced commercially from a growing variety of renewable biomass and waste sources, is an appealing feedstock for the production of fuels and chemicals. The literature clearly shows that bioethanol is a versatile build...
In this work we present the preparation and characterization of cerium doped lanthanum zirconate (LCZO) films and non-stoichiometric lanthanum zirconate (LZO) buffer layers on metallic Ni-5% W substrates using chemical solution deposition (CSD), star...
Tungsten materials, used as friction stir welding tools, undergo severe plastic deformation and even collapse at high operating temperatures. In order to improve the low-temperature toughness and high-temperature strength, W-10wt.%Re-0.5wt.%ZrC alloy...
Dissimilar Al 3003 and Cu tubular components were successfully brazed without interface cracking using ZrO2 nanomaterials reinforced with Al-19Cu-11Si-2Sn filler. The filler was initially cast using an induction furnace and processed into ring form f...
In order to improve product format quality and material flexibility, variety of application, and cost-effectiveness, SiC, ZrO2, and Al hybrid composites were manufactured in the research utilizing the powder metallurgy (PM) technique. A model was cre...
of 4