A novel design of combustion catalysts is proposed, in which clay/TiO2/MnAl-mixed oxide composites are formed by intermixing exfoliated organo-montmorillonite with oxide precursors (hydrotalcite-like in the case of Mn-Al oxide) obtained by an inverse...
Direct decomposition of nitric oxide (NO) proceeds over Co–Mn–Al mixed oxides promoted by potassium. In this study, answers to the following questions have been searched: Do the properties of the K-promoted Co–Mn–Al catalysts...
Emission of nitric oxide represents a serious environmental problem since it contributes to the formation of acid rain and photochemical smog. Potassium-modified Co-Mn-Al mixed oxide is an effective catalyst for NO decomposition. However, there are p...
Cu–Mn mixed oxides are well known as active combustion catalysts. The common method for their synthesis is based on co-precipitation, with NaOH as a precipitant, and is burdened with the possibility of introducing undesired Na contamination. Th...
The effect of calcination temperature (500–700 °C) on physico-chemical properties and catalytic activity of 2 wt. % K/Co-Mn-Al mixed oxide for N2O decomposition was investigated. Catalysts were characterized by inductively coupled plasma sp...
Composites of Laponite and Cu–Mn hopcalite-related mixed oxides, prepared from hydrotalcite-like (Htlc) precursors obtained in inverse microemulsions, were synthesized and characterized with XRF, XRD, SEM, TEM, H2 temperature-programmed reducti...
Co-Mn-Al mixed oxides promoted by potassium are known as active catalysts for the direct decomposition of nitric oxide (NO). In this study, the answer to the following question has been considered: does the presence of cerium in K-promoted Co-Mn-Al c...
Mixed oxides were synthesized by co-precipitation of a Cu source in combination with Al, Fe or Mn corresponding salts as precursors. The materials were calcined at 600 and 1000 °C in order to crystallize the phases and to mimic the reaction condi...
In this work, the LDH approach was used to prepare MnCoAl mixed oxides with various textural and structural frameworks for the purpose of enhancing the total oxidation of ethanol. Our results showed that the catalytic activity of the MnCoAl oxides wa...
NOx storage-reduction (NSR) is a potential approach for the effective removal of NOx under the lean conditions in lean-burn engines. Herein, manganese-doped mixed oxides (Mn/MgAlOx) with high performance for low temperature NOx storage and release we...
Fundamental research on direct NO decomposition is still needed for the design of a sufficiently active, stable and selective catalyst. Co-based mixed oxides promoted by alkali metals are promising catalysts for direct NO decomposition, but which par...
Layered double hydroxide (LDH)-derived mixed oxides offer a promising approach for CO2 hydrogenation to light hydrocarbons. Herein, we explore the impact of various transition metals (X = Mn, Co, Cu, and Zn) incorporated into the M-Al or M-(Al+Fe) LD...
A sulfur transfer agent in catalysts can effectively reduce the emission of SO2 with minimum adverse effects on the catalytic cracking ability of the primary catalyst. In this paper, the composition and performance of sulfur transfer agents with diff...
The sol–gel method, adapted to aqueous media, was used for the synthesis of BaMn0.7Cu0.3O3 (BMC) and Ba0.9A0.1Mn0.7Cu0.3O3 (BMC-A, A = Ce, La or Mg) perovskite-type mixed oxides. These samples were fully characterized by ICP-OES, XRD, XPS, H2-T...
To improve the catalytic performance of an active layered double hydroxide (LDH)-derived CuCeMgAlO mixed oxide catalyst in the total oxidation of methane, it was promoted with different transition-metal cations. Thus, two series of multicationic mixe...
Magnetron sputtering is an advantageous method for preparing catalysts supported on stainless steel meshes. Such catalysts are particularly suitable for processes carried out at high space velocities. One of these is the catalytic total oxidation of...
A 5 wt% BaMnO3-CeO2 composite catalyst prepared by the one-pot method exhibits extraordinary catalytic performance for nitrogen monoxide (NO) direct decomposition into N2 and O2; however, the reasons for the high activity remain to be explored. Here,...
A series of M(x)CoCeMgAlO mixed oxides with different transition metals (M = Cu, Fe, Mn, and Ni) with an M content x = 3 at. %, and another series of Fe(x)CoCeMgAlO mixed oxides with Fe contents x ranging from 1 to 9 at. % with respect to cations, wh...
FeCrMnxAlCu (x = 2.0, 1.5, 1.0, 0.5, and 0.0) high-entropy alloys (HEAs) were prepared using vacuum arc melting. The phase structure, microstructure, and element distribution of FeCrMnxAlCu (x = 2.0, 1.5, 1.0, 0.5, and 0.0) HEAs were analyzed using X...
This study presents the synthesis and characterization of lanthanum-modified alumina supported cerium–manganese mixed oxides, which were prepared by three different methods (coprecipitation, impregnation and citrate-based sol-gel method) follow...
Several metal oxide nanoparticles (NPs) were already obtained by mixing NaOH solution with chloride solution of the corresponding metal to form metal hydroxide or oxide precipitates and wash—dry—calcine the latter. However, the complete l...
Co-Mn-Mg-Al oxides were synthesized using auto-combustion and co-precipitation techniques. Constant ratios were maintained with (Co + Mn + Mg)/Al equal to 3.0, (Co + Mn)/Mg equal to 1.0 and Co/Mn equal to 0.5. The chemical and structural composition...
A series of Cu–Mn–SSZ-13 catalysts were obtained by co-exchange of Mn and Cu into SSZ-13 together (ion exchange under a mixed solution of Cu(NO3)2 and Mn(NO3)2) and compared with Cu–SSZ-13 catalysts on the selective catalytic reduct...
The low-density steels represent a topic of great interest within the scientific world because of the great demand from the steel market of increasingly lighter materials, also featured by an optimal mix of the mechanical properties. In this work, th...
The valorization of hazardous industrial wastes into high-performance catalytic materials presents a compelling route to address both environmental pollution and resource scarcity. This work presents a closed-loop strategy for the fabrication of Pt/M...
This study investigates the fabrication of a Cu-Mn-Al alloy coating on 27SiMn steel using Cold Metal Transfer (CMT) technology with an innovative Ar-B(OCH3)3 mixed shielding gas, focusing on the effect of the gas flow rate (5–20 L/min). The add...
Uranium contamination in aquatic environments has raised increasing concerns because of its chemical toxicity and radioactivity, creating a persistent demand for efficient uranium sequestration and recovery technologies. Metal oxides have attracted c...
In this study, we examined the mineralogy, geochemistry and origin of Fe–Mn mineralization occurring as lenses within siliceous mudstones of the Middle Eocene Maden Complex (Durmuştepe, Elazığ, Türkiye) using multivariate st...
This study aims to comprehensively assess the suitability of post-processing annealing (at 900–1200 °C) for enhancing the key properties of 316L steel fabricated via laser powder bed fusion (LPBF). It adopts a holistic approach to investiga...
The Qieliekeqi siderite deposit, located in the Tashkurgan block of western Kunlun, is a carbonate-hosted iron deposit with hydrothermal sedimentary features. This study integrates whole-rock geochemistry, stable isotopes, and zircon U–Pb&ndash...
A unique high-throughput approach to identify new catalysts for total oxidation of methane from the exhaust gas of biogas-operated lean-burn engines is presented. The approach consists of three steps: (1) A primary screening using emission-corrected...
Genetic, neuropathological and biochemical investigations have revealed meaningful relationships between aluminum (Al) exposure and neurotoxic and hematotoxic damage. Hence, intensive efforts are being made to minimize the harmful effects of Al. More...
This study investigates the reactivity of municipal solid waste incineration residues to aqueous carbonation, focusing on CO2 absorption rates, uptakes, and heavy metal (HM) leachability. Various combinations of boiler, electrofilter, and bag filter...
Composite NOx sensors were fabricated by combining partially and fully stabilized yttria-doped zirconia with alumina forming a composite electrolyte, Y2O3-ZrO2-Al2O3, and strontium-doped lanthanum manganese oxide mixed with gold to form the composite...
This article deals with the issue of electromagnetic radiation, specifically methods of eliminating radiation using protective coatings. Protective coatings were created from commercially available fabricated but also recycled metal powders and commo...
This work introduces a one-step method for the preparation of layered oxide cathode materials utilizing pure Ni and Co mixed solution obtained from the waste hydrodesulfurization (HDS) catalyst. An efficient non-separation strategy with pyrometallurg...
WC/Y–TZP–Al2O3 hybrid ceramic–matrix composites (CMCs) with dispersed Hadfield steel particles were sintered and then tested at sliding speeds in the range of 7–37 m/s and contact pressure 5 MPa. Fast and low-temperature sinte...
The high material cost has restricted the development of concentrated solar power (CSP) systems. In this study, a low-cost alternative material was developed by adding aluminum to 304 stainless steel to form a protective oxide film, thereby enhancing...
Monolithic Mn-Fe-Ce-Al-O catalyst with honeycomb cordierite ceramic as a carrier was reported for the first time for low temperature deNOx application. In the reaction of selective catalytic reduction (SCR) of NO with NH3, a NO conversion of above 80...
Co4−iZniMnAlOx mixed oxides (i = 0, 0.5 and 1) were prepared by coprecipitation, subsequently modified with potassium (2 or 4 wt.% K), and investigated for direct catalytic NO decomposition, one of the most attractive and challenging NOx abatem...
We have investigated the major- and trace-element composition of hydrothermal pyrite, magnetite, and Ti-magnetite, and of the principal Cu-minerals chalcopyrite and chalcocite, to constrain ore-forming processes in the northeastern Saveh district (ce...
As the use of Li-ion batteries is spreading, incidents in large energy storage systems (stationary storage containers, etc.) or in large-scale cell and battery storages (warehouses, recyclers, etc.), often leading to fire, are occurring on a regular...
Pancreatic ductal adenocarcinoma (PDAC) is a devastating tumor type where a very high proportion of people diagnosed end up dying from cancer. Surgical resection is an option for only about 20% of patients, where the 5-year survival increase ranges f...
This study reports a combined morphological, surface chemical, and mineralogical characterization of fine particulate matter (PM2.5) collected at three coastal sites—Northern (Abhour), Middle (Alhamraa), and Southern (Alkhomra)—in Jeddah,...
Additive manufacturing (AM) of orthopedic implants has increased in recent years, providing benefits to surgeons, patients, and implant companies. Both traditional and new titanium alloys are under consideration for AM-manufactured implants. However,...
Amidst rapid urbanization, fine particulate matter (PM2.5) has emerged as a critical environmental challenge in China, posing substantial health risks due to its complex composition and diverse sources. This study provides a seasonally resolved analy...
The Dzhidinsky orefield is located in the Zakamensky district of Buryatia. It is characterized by a high concentration of mineralization in a small area. The ores of the Dzhidinsky economic deposits are complex. This ore field includes Pervomaiskoye...
The Xiongcun Cu–Au ore district is in the southern middle Gangdese Metallogenic Belt, Tibet, and formed during Neo-Tethyan oceanic subduction. The Xiongcun ore district mainly comprises two deposits, the No. I and No. II deposits, which were fo...