Selective catalytic reduction of NOx by CO (CO-SCR) to both N2 and CO2 is a promising way to simultaneously remove two harmful gases, CO and NOx, in automobile and factory exhaust gases. The development of efficient catalysts is the key challenge for...
Cu-based catalysts, modified by gallium addition via the stepwise co-precipitation method, were studied for the liquid phase hydrogenation of hydroxypivalaldehyde (HPA) to neopentyl glycol (NPG). Through physico-chemical techniques, the effects of ga...
The renewable-energy-powered electrocatalytic CO2 reduction reaction (CO2RR) efficiently converts CO2 into high-value chemicals and fuels, offering a promising approach to addressing environmental and energy sustainability challenges. This process is...
The advent of fuel cells has led to a series of studies on hydrogen production. As an excellent hydrogen carrier, methanol can be used for reforming to produce hydrogen. Copper-based catalysts have been widely used in methanol reforming due to their...
Several Cu and Ni-based catalysts were synthetized over Ce-based supports, either pure or mixed with different amounts of alumina (1:2 and 1:3 mol/mol). Different metal loadings (10–40 wt%) and preparation methods (wet impregnation, co-precipit...
Electrochemical CO2 reduction reaction (CO2RR) is a key technology for achieving carbon neutrality and efficient utilization of renewable energy, capable of converting CO2 into high-value-added carbon-based fuels and chemicals. Copper (Cu)-based cata...
Cu-containing layered double hydroxides (LDHs) were synthesized by a co-precipitation method at different reaction conditions, such as aging time, pH, precipitation rate and synthesis temperature. The effect of these parameters on the structure and c...
Water can cause the growth and oxidation of Cu nanoparticles on the surface of Cu-based catalysts, leading to their deactivation. However, during methanol synthesis process from syngas on Cu-based catalysts, water is inevitably produced as a by-produ...
Cyclohexene esterification–hydrogenation for the efficient production of cyclohexanol will be commercialized for the first time. Cu/MgO/Al2O3 catalysts with layered double hydroxides as precursors were developed, and the effect of altering the...
The catalytic conversion of carbon dioxide to methanol is significantly important both practically and scientifically for the reduction in CO2 emissions. Furthermore, it can partially address the issue of human reliance on non-renewable resources. Th...
The electrochemical carbon dioxide reduction reaction (CO2RR) serves as a crucial bridge linking CO2 utilization, renewable electricity, and chemical production. Driven by intermittent clean energy sources such as wind and solar power, it can convert...
The massive emission of CO2 has caused a series of environmental problems, including global warming, which exacerbates natural disasters and human health. Cu-based catalysts have shown great activity in the reduction of CO2, but the mechanism of CO2...
CO2 hydrogenation to methanol is a key route for carbon recycling within the carbon capture, utilization, and storage (CCUS) framework. Cu-based catalysts are widely employed because of their low cost and high methanol selectivity, yet monometallic C...
The complete conversion of NOx to harmless N2 without N2O formation is crucial for the control of air pollution, especially at low temperatures. Cu-based catalysts are promising materials due to their low cost and high activity in NO dissociation, ev...
In order to explore co-production alternatives, a once-through process for CO2 hydrogenation to chemicals and liquid fuels was investigated experimentally. In this approach, two different catalysts were considered; the first was a Cu-based catalyst t...
Promoting the activity of heterogeneous catalysts in the hydrolysis of ammonia borane for hydrogen production is still a challenging topic for researchers in the hydrogen energy and catalysis fields. Herein, we present a universal, simple and efficie...
Most studies on the Cu-based catalysts in the ethynylation of formaldehyde are merely focused on the tuning of electronic configuration and dispersion of the Cu+ species. So far, little attention has been paid to the synergy between Cu species and pr...
The electrochemical reduction of CO2 to ethanol represents a sustainable alternative to recycle CO2 into a value-added product, yet achieving high selectivity and efficiency remains a challenge. This work explores Cu-based catalysts supported on SiO2...
In this work, a new methodology for dispersing metal particles supported in clay has been described. For this purpose, a sepiolite has been modified by a microwave-assisted treatment to increase the surface area and pore volume due to the progressive...
In this study, commercial Multi-Walled Carbon Nanotubes (MWCNTs) were subjected to two treatments: oxidation in a liquid phase using concentrated nitric acid and oxidation in a gas phase using air flow. Cu-based catalysts were prepared by ultrasound-...
In this work, we propose two bifunctional nanocomposite catalysts based on acidic mesostructured γ-Al2O3 and a Cu/ZnO/ZrO2 redox phase. γ-Al2O3 was synthesized by an Evaporation-Induced Self-Assembly (EISA) method using two different temp...
With the escalating challenges of global warming and the energy crisis, electrocatalytic CO2 reduction reaction (CO2RR) has emerged as a promising strategy to mitigate atmospheric CO2 concentrations while converting it into high-value-added chemicals...
Cu-based catalysts supported on sepiolite have been tested in vapor-phase hydrogenation of furfural. The incorporation of basic or amphoteric metal oxides (magnesium oxide, zinc oxide, or cerium oxide) improves the catalytic behavior, reaching a maxi...
The threat of ozone in indoor spaces and other enclosed environments is receiving increasing attention. Among numerous ozone catalytic decomposition technologies, copper catalytic material has a superior performance and relatively low cost, making it...
Conversion of CO2 to valuable chemicals driven by renewable electricity via electrocatalytic reduction processes is of great significance for achieving carbon neutrality. Copper-based materials distinguish themselves from other electrocatalysts for t...
A series of CuO-based catalysts supported on the α-MnO2 nanowire were facilely synthesized and employed as the CO oxidation catalysts. The achieved catalysts were systematically characterized by XRD, SEM, EDS-mapping, XPS and H2-TPR. The cataly...
Copper-based catalysts are widely applied in catalytic CO conversion. Despite their importance in determining catalytic performance, the interaction of CO with different copper states has often been the subject of debate. Herein, we discuss the prepa...
Bioethanol to butadiene is currently the most promising non-oil-based butadiene production route. Here, copper is introduced into the conventional bimetallic zeolite catalyst to partially substitute for zinc; the isolated tetracoordinated Cu(II) spec...
CeO2 is an outstanding support commonly used for the CuO-based CO oxidation catalysts due to its excellent redox property and oxygen storage–release property. However, the inherently small specific surface area of CeO2 support restricts the fur...
Here, we report a Na-promoted FeCu-based catalyst with excellent liquid hydrocarbon selectivity and catalytic activity. The physiochemical properties of the catalysts were comprehensively characterized by various characterization techniques. The char...
As a toxic pollutant, carbon monoxide (CO) usually causes harmful effects on human health. Therefore, the thermally catalytic oxidation of CO has received extensive attention in recent years. The CuO-based catalysts have been widely investigated due...
CuO-based catalysts are usually used for CO oxidation owing to their low cost and excellent catalytic activities. In this study, a series of metal oxide (La2O3, Fe2O3, PrO2, Sm2O3, and MnO2)-doped CuO-based catalysts with mesoporous Ce0.8Zr0.2O2 supp...
Carbon-doped nanostructured CuMo-based photocatalysts were prepared by solvothermal synthesis. Two thermal treatments—oxidative and inert atmosphere—were used for the synthesis of the catalysts, and the influence of spherical carbon struc...
Catalytic conversion of biomass-derived ethanol into n-butanol through Guerbet coupling reaction has become one of the key reactions in biomass valorization, thus attracting significant attention recently. Herein, a series of supported Cu catalysts d...
The direct hydrogenation of CO2 into dimethyl-ether (DME) has been studied in the presence of ferrierite-based CuZnZr hybrid catalysts. The samples were synthetized with three different techniques and two oxides/zeolite mass ratios. All the samples (...
The catalytic upgrading of ethanol into butanol through the Guerbet coupling reaction has received increasing attention recently due to the sufficient supply of bioethanol and the versatile applications of butanol. In this work, four different suppor...
Rice husk ash (RHA) has potential as a supporter of catalysts. In this research, we studied the activity and SO2 tolerance of RHA-based Fe-Cu oxide in the reduction of NO by CO. Characterization methods were employed to study the properties of the ca...
The cement industry significantly impacts the environment due to natural resource extraction and fossil fuel combustion, with carbon dioxide (CO2) emissions being a major concern. The industry emits 0.6 tons of CO2 per ton of cement, accounting for a...
Copper (I, II) oxide powders were tested for glycerol conversion to lactic acid under alkaline conditions. Fresh and spent catalysts were characterized using powder X-ray diffraction, Scanning Electron Microscopy/Energy Dispersive X-ray Spectroscopy,...
The thermocatalytic hydrogenation of CO2 to methanol offers a promising route for reducing greenhouse gas emissions (GHG) and producing valuable chemicals and fuels. In this study, copper–zinc bimetallic catalysts supported on a zirconium-based...
The metal-oxide interaction is of significance to the construction of active sites for Cu-catalyzed CO2 hydrogenation to methanol. This study examines the effect of ZnO and ZrO2 composition on the Cu/ZnO/ZrO2 catalyst structure and surface properties...
Nieuwland catalyst is a key step in the dimerization of acetylene. Various zirconium metal additives incorporating Nieuwland catalysts were prepared, and their catalytic performances were assessed in acetylene dimerization. Different characterization...
Compared with the traditional granular catalyst, a mesh-type structured CuZn-based catalyst prepared by the self-growth ordered nanoporous carrier γ-Al2O3/Al can adapt to the MSR reaction system with high flux, strong mass transfer and heat tra...
Aminomethylhydroxymethylfuran derivatives are well known compounds which are used in the pharmaceutical industry. Reductive amination of 5-hydroxymethylfurfural (HMF) derived from available non-edible lignocellulosic biomass is an attractive method f...
Several layered double hydroxides (LDHs) with general chemical composition (Cu,Zn)1−xAlx(OH)2(CO3)x/2·mH2O have been synthesized by the co-precipitation method, maintaining a (M2+/M3+) molar ratio of 3, and varying the Cu2+/Zn2+ molar ra...
Three different alumina-based Ni, Cu, Co oxide catalysts with metal loading of 10 wt %, and labeled 10Ni–Al, 10Co–Al and 10Cu–Al, were prepared by microwave-assisted solution combustion. Their morphological, structural and surface p...
Ca, Ni, Co, and Ge promoters were examined as potential candidates to substitute for the current toxic Cr in Cu-promoted Fe oxide-based catalysts for the HT-WGS reaction. The Ca and Ni promoters were found to improve catalyst performance relative to...
Cu–Mn mixed oxides are well known as active combustion catalysts. The common method for their synthesis is based on co-precipitation, with NaOH as a precipitant, and is burdened with the possibility of introducing undesired Na contamination. Th...
Ternary CuxZnyAlz catalysts were prepared using the hydrotalcite (HT) method. The influence of the atomic x:y:z ratio on the physico-chemical and catalytic properties under CO2 hydrogenation conditions was probed. The characterization data of the inv...
A new mononuclear Cu(II) complex [Cu(L2)(H2O)2], where L is the Schiff base 2-[2-(3-bromopropoxy)benzylideneamino] benzoic acid, was synthesized and covalently anchored onto an amino-functionalized SBA-15 mesoporous silica in order to obtain an effic...
of 16