Submit to Lubricants Review for Lubricants

Journal Menu

Journal Browser

Most Cited & Viewed

Most Cited & Viewed Papers

Most Cited Papers
Most Viewed Papers
Most Downloaded Papers

Citations	Article
133	Corrosion Inhibitors: Natural and Synthetic Organic Inhibitors by Ahmed A. Al-Amiery, Wan Nor Roslam Wan Isahak and Waleed Khalid Al-Azzawi
105	High-Temperature Solid Lubricants and Self-Lubricating Composites: A Critical Review by Jia-Hu Ouyang, Yu-Feng Li, Yun-Zhuo Zhang, Ya-Ming Wang and Yu-Jin Wang
73	Prediction of Tribological Properties of Alumina-Coated, Silver-Reinforced Copper Nanocomposites Using Long Short-Term Model Combined with Golden Jackal Optimization by Ismail R. Najjar, Ayman M. Sadoun, Adel Fathy, Ahmed W. Abdallah, Mohamed Abd Elaziz and Marwa Elmahdy
54	Carbon Nanomaterial-Based Lubricants: Review of Recent Developments by Md Mahfuzur Rahman, Mohaiminul Islam, Rakesh Roy, Hassan Younis, Maryam AlNahyan and Hammad Younes
51	A Review of Research on Wind Turbine Bearings’ Failure Analysis and Fault Diagnosis by Han Peng, Hai Zhang, Yisa Fan, Linjian Shangguan and Yang Yang
51	State-of-the-Art in Sustainable Machining of Different Materials Using Nano Minimum Quality Lubrication (NMQL) by Avinash Kumar, Anuj Kumar Sharma and Jitendra Kumar Katiyar
46	Graphene-Based Nanomaterials as Lubricant Additives: A Review by Qiulong Gao, Shuwen Liu, Kaiming Hou, Zhangpeng Li and Jinqing Wang
39	Machinability Investigations Based on Tool Wear, Surface Roughness, Cutting Temperature, Chip Morphology and Material Removal Rate during Dry and MQL-Assisted Milling of Nimax Mold Steel by Rüstem Binali, Havva Demirpolat, Mustafa Kuntoğlu and Hacı Sağlam
39	Exploring the Effectiveness of Isatin–Schiff Base as an Environmentally Friendly Corrosion Inhibitor for Mild Steel in Hydrochloric Acid by Ahmed A. Al-Amiery, Nadia Betti, Wan Nor Roslam Wan Isahak, Waleed Khalid Al-Azzawi and Wan Mohd Norsani Wan Nik
38	Current Status of Hard Turning in Manufacturing: Aspects of Cooling Strategy and Sustainability by Rajashree Mallick, Ramanuj Kumar, Amlana Panda and Ashok Kumar Sahoo

Citations	Article
38	Tribological Application of Nanocomposite Additives in Industrial Oils by Milan Bukvić, Sandra Gajević, Aleksandar Skulić, Slobodan Savić, Aleksandar Ašonja and Blaža Stojanović
37	Nanofluids Minimal Quantity Lubrication Machining: From Mechanisms to Application by Anxue Chu, Changhe Li, Zongming Zhou, Bo Liu, Yanbin Zhang, Min Yang, Teng Gao, Mingzheng Liu, Naiqing Zhang, Yusuf Suleiman Dambatta and Shubham Sharma
30	Multi-Objective Optimization of Tribological Characteristics for Aluminum Composite Using Taguchi Grey and TOPSIS Approaches by Sandra Gajević, Ana Marković, Saša Milojević, Aleksandar Ašonja, Lozica Ivanović and Blaža Stojanović
26	Forever Chemicals, Per-and Polyfluoroalkyl Substances (PFAS), in Lubrication by Darrius Dias, Jake Bons, Abhishek Kumar, M. Humaun Kabir and Hong Liang
23	Physics-Informed Machine Learning—An Emerging Trend in Tribology by Max Marian and Stephan Tremmel
21	A Review of the Friction and Wear Behavior of Particle-Reinforced Aluminum Matrix Composites by Yunlei Wang and Jie Zhang
21	MoS₂ Nanomaterials as Lubricant Additives: A Review by Ziyan Lu, Qingqing Lin, Zhaotao Cao, Wanyuan Li, Junjie Gong, Yan Wang, Kunhong Hu and Xianguo Hu
20	A Review of the Laser Cladding of Metal-Based Alloys, Ceramic-Reinforced Composites, Amorphous Alloys, and High-Entropy Alloys on Aluminum Alloys by Pengfei Zhao, Zimu Shi, Xingfu Wang, Yanzhou Li, Zhanyi Cao, Modi Zhao and Juhua Liang
19	Research Progress of Antioxidant Additives for Lubricating Oils by Deping Xia, Yonggang Wang, Hui Liu, Jincan Yan, Hualin Lin and Sheng Han
19	Nanotechnology in Lubricants: A Systematic Review of the Use of Nanoparticles to Reduce the Friction Coefficient by Milton Garcia Tobar, Rafael Wilmer Contreras Urgiles, Bryan Jimenez Cordero and Julio Guillen Matute

Citations	Article
17	Progress in Aluminum-Based Composites Prepared by Stir Casting: Mechanical and Tribological Properties for Automotive, Aerospace, and Military Applications by Sachin Kumar Sharma, Sandra Gajević, Lokesh Kumar Sharma, Reshab Pradhan, Yogesh Sharma, Ivan Miletić and Blaža Stojanović
13	Investigation of the Effect of Al₂O₃ Nanoparticle-Added MQL Lubricant on Sustainable and Clean Manufacturing by Fuat Kara
12	Exploring the Boundaries of Electrically Induced Bearing Damage in Grease-Lubricated Rolling Contacts by Jack R. Janik, Sudip Saha, Robert L. Jackson and German Mills
10	Plant-Based Oils for Sustainable Lubrication Solutions—Review by Diana Berman
8	Machine-Learning-Based Wear Prediction in Journal Bearings under Start–Stop Conditions by Florian König, Florian Wirsing, Ankit Singh and Georg Jacobs
8	Electrification of a Mini Traction Machine and Initial Test Results by Peter Lee, Carlos Sanchez, Michael Moneer and Andrew Velasquez
7	A Study on the Lubrication Characteristics and Parameter Influence of a High-Speed Train Herringbone Gearbox by Shuai Shao, Kailin Zhang, Yuan Yao, Yi Liu, Jieren Yang, Zhuangzhuang Xin and Kuangzhou He
7	A Review of Wear in Additive Manufacturing: Wear Mechanism, Materials, and Process by Xiangjun Jiang, Juntao Lu, Na Zhao, Zhen Chen and Zhiming Zhao
7	Study on the Dynamic Characteristics of the Gear Lubrication Flow Field with Baffles and Optimization Design Strategies by Yihong Gu, Lin Li and Gaoan Zheng
6	Enhancing Lubrication Performance of Plastic Oil Lubricant with Oleic Acid-Functionalized Graphene Nanoplatelets and Hexagonal Boron Nitride Solid Lubricant Additives by Soumya Sikdar and Pradeep L. Menezes

Citations	Article
7	Study on the Dynamic Characteristics of the Gear Lubrication Flow Field with Baffles and Optimization Design Strategies by Yihong Gu, Lin Li and Gaoan Zheng
6	Synthesis, Stability, and Tribological Performance of TiO₂ Nanomaterials for Advanced Applications by Kai Zeng, Liang Cheng, Wenjing Hu and Jiusheng Li
6	Additive Manufacturing of Advanced Structural Ceramics for Tribological Applications: Principles, Techniques, Microstructure and Properties by Wei-Jian Miao, Shu-Qi Wang, Zi-Heng Wang, Fan-Bin Wu, Yun-Zhuo Zhang, Jia-Hu Ouyang, Ya-Ming Wang and Yong-Chun Zou
6	Investigate on the Fluid Dynamics and Heat Transfer Behavior in an Automobile Gearbox Based on the LBM-LES Model by Gaoan Zheng, Pu Xu and Lin Li
5	Study of the Influence of Nanoparticle Reinforcement on the Mechanical and Tribological Performance of Aluminum Matrix Composites—A Review by Varun Singhal, Daksh Shelly, Abhishek Saxena, Rahul Gupta, Vipin Kumar Verma and Appurva Jain
4	Development of Wear-Resistant Polymeric Materials Using Fused Deposition Modelling (FDM) Technologies: A Review by Zhiwang Li and Li Chang
3	Method for Maintaining Technical Condition of Marine Diesel Engine Bearings by Sergii Sagin, Arsenii Sagin, Yurii Zablotskyi, Oleksij Fomin, Václav Píštěk and Pavel Kučera
3	Study on the Effect of CeO₂ on the Performance of WC + Ni60 Laser Cladding Coating by Jingquan Wu, Jianwen Zhang, Dianlong Chen, Jiang Huang, Wenqing Shi, Fenju An and Xianglin Wu
3	Study on the Tribological Behavior of Laser Surface Texturing on Silicon Nitride Ceramic Under Water Lubrication by Hong-Jian Wang, Jing-De Huang, Bo Wang, Yang Zhang and Jin Wang
3	Study on the Time-Varying Stiffness Characteristics of Four-Point Contact Ball Bearings by Runlin Chen, Jiakai Li, Yimo Wang, Rushen Deng, Weihao Chen and Wenhui Li

Citations	Article
555	A Review of Ionic Liquid Lubricants by Anthony E. Somers, Patrick C. Howlett, Douglas R. MacFarlane and Maria Forsyth
443	Solid Lubrication with MoS₂: A Review by Mohammad R. Vazirisereshk, Ashlie Martini, David A. Strubbe and Mehmet Z. Baykara
208	Dispersion of Nanoparticles in Lubricating Oil: A Critical Review by Yan Chen, Peter Renner and Hong Liang
207	Chemically Modifying Vegetable Oils to Prepare Green Lubricants by Gobinda Karmakar, Pranab Ghosh and Brajendra K. Sharma
192	Lubricants in Pharmaceutical Solid Dosage Forms by Jinjiang Li and Yongmei Wu
186	Multi-Scale Surface Texturing in Tribology—Current Knowledge and Future Perspectives by Philipp G. Grützmacher, Francisco J. Profito and Andreas Rosenkranz
154	Advances in the Application of Vegetable-Oil-Based Cutting Fluids to Sustainable Machining Operations—A Review by Rasaq A. Kazeem, David A. Fadare, Omolayo M. Ikumapayi, Adeolu A. Adediran, Samuel J. Aliyu, Stephen A. Akinlabi, Tien-Chien Jen and Esther T. Akinlabi
153	Current Trends and Applications of Machine Learning in Tribology—A Review by Max Marian and Stephan Tremmel
141	The Preparation of Graphene Oxide and Its Derivatives and Their Application in Bio-Tribological Systems by Jianchang Li, Xiangqiong Zeng, Tianhui Ren and Emile Van der Heide
138	The Use of Artificial Intelligence in Tribology—A Perspective by Andreas Rosenkranz, Max Marian, Francisco J. Profito, Nathan Aragon and Raj Shah

More Articles...

Views	Article
28618	Corrosion Inhibitors: Natural and Synthetic Organic Inhibitors by Ahmed A. Al-Amiery, Wan Nor Roslam Wan Isahak and Waleed Khalid Al-Azzawi
15777	High-Temperature Solid Lubricants and Self-Lubricating Composites: A Critical Review by Jia-Hu Ouyang, Yu-Feng Li, Yun-Zhuo Zhang, Ya-Ming Wang and Yu-Jin Wang
13126	A Review of Research on Wind Turbine Bearings’ Failure Analysis and Fault Diagnosis by Han Peng, Hai Zhang, Yisa Fan, Linjian Shangguan and Yang Yang
12222	Graphene as a Lubricant Additive for Reducing Friction and Wear in Its Liquid-Based Form by Ab Rahman Marlinda, Gregory Soon How Thien, Mehmood Shahid, Ting Yang Ling, Abu Hashem, Kah-Yoong Chan and Mohd Rafie Johan
11754	Forever Chemicals, Per-and Polyfluoroalkyl Substances (PFAS), in Lubrication by Darrius Dias, Jake Bons, Abhishek Kumar, M. Humaun Kabir and Hong Liang
9953	Investigations on Spin Power Losses Generated in a Planetary Gear Set Using Thermal Network Method by Marie Winger, Yann Marchesse, Thomas Touret, Christophe Changenet, Fabrice Ville and Patrice Gédin
9655	Conventional and Recent Advances of Vegetable Oils as Metalworking Fluids (MWFs): A Review by Inês S. Afonso, Glauco Nobrega, Rui Lima, José R. Gomes and João E. Ribeiro
9168	Research Progress of High-Speed Wheel–Rail Relationship by Xuesong Jin
8721	Graphene-Based Nanomaterials as Lubricant Additives: A Review by Qiulong Gao, Shuwen Liu, Kaiming Hou, Zhangpeng Li and Jinqing Wang
8228	Thickening Properties of Carboxymethyl Cellulose in Aqueous Lubrication by Jan Ulrich Michaelis, Sandra Kiese, Tobias Amann, Christopher Folland, Tobias Asam and Peter Eisner

Views	Article
11754	Forever Chemicals, Per-and Polyfluoroalkyl Substances (PFAS), in Lubrication by Darrius Dias, Jake Bons, Abhishek Kumar, M. Humaun Kabir and Hong Liang
9953	Investigations on Spin Power Losses Generated in a Planetary Gear Set Using Thermal Network Method by Marie Winger, Yann Marchesse, Thomas Touret, Christophe Changenet, Fabrice Ville and Patrice Gédin
7618	Research Progress of Antioxidant Additives for Lubricating Oils by Deping Xia, Yonggang Wang, Hui Liu, Jincan Yan, Hualin Lin and Sheng Han
6971	Recent Progress in Electrically Conductive and Thermally Conductive Lubricants: A Critical Review by Bayazid Bustami, Md Mahfuzur Rahman, Mst. Jeba Shazida, Mohaiminul Islam, Mahmudul Hasan Rohan, Shakhawat Hossain, Alam S. M. Nur and Hammad Younes
6778	MoS₂ Nanomaterials as Lubricant Additives: A Review by Ziyan Lu, Qingqing Lin, Zhaotao Cao, Wanyuan Li, Junjie Gong, Yan Wang, Kunhong Hu and Xianguo Hu
6715	Physics-Informed Machine Learning—An Emerging Trend in Tribology by Max Marian and Stephan Tremmel
6712	Oral Lubrication, Xerostomia, and Advanced Macromolecular Lubricants for Treatment of Dry Mouth by William Austin, Maryam Hdeib, Paige Fraser, Maya Goldchtaub, Elika Shams, Tianyi Han, Pierre-Luc Michaud and Vahid Adibnia
6025	Application and Prospect of Wear Simulation Based on ABAQUS: A Review by Liang Yan, Linyi Guan, Di Wang and Dingding Xiang
6001	Recent Progress of Machine Learning Algorithms for the Oil and Lubricant Industry by Md Hafizur Rahman, Sadat Shahriar and Pradeep L. Menezes
5970	Fundamental Structure–Function Relationships in Vegetable Oil-Based Lubricants: A Critical Review by Navindra Soodoo, Laziz Bouzidi and Suresh S. Narine

Views	Article
9953	Investigations on Spin Power Losses Generated in a Planetary Gear Set Using Thermal Network Method by Marie Winger, Yann Marchesse, Thomas Touret, Christophe Changenet, Fabrice Ville and Patrice Gédin
5501	Plant-Based Oils for Sustainable Lubrication Solutions—Review by Diana Berman
4431	Multi-Parametric Investigations on White Etching Crack Formation in Deep Grove Ball Bearings by Manuel Zuercher, Eberhard Schlücker, Christian Spaeth and Walter Holweger
3946	Additives for Lubricating Oil and Grease: Mechanism, Properties and Applications by Jingbin Han
3784	Numerical Computation and Experimental Research for Dynamic Properties of Ultra-High-Speed Rotor System Supported by Helium Hydrostatic Gas Bearings by Changlei Ke, Shun Qiu, Kongrong Li, Lianyou Xiong, Nan Peng, Xiaohua Zhang, Bin Dong and Liqiang Liu
3747	A Review of Wear in Additive Manufacturing: Wear Mechanism, Materials, and Process by Xiangjun Jiang, Juntao Lu, Na Zhao, Zhen Chen and Zhiming Zhao
3717	Exploring the Boundaries of Electrically Induced Bearing Damage in Grease-Lubricated Rolling Contacts by Jack R. Janik, Sudip Saha, Robert L. Jackson and German Mills
3567	Friction Torque in Miniature Ball Bearings by Denis Cojocaru, Gelu Ianuș, Vlad Cârlescu, Bogdan Chiriac and Dumitru Olaru
3497	Progress in Aluminum-Based Composites Prepared by Stir Casting: Mechanical and Tribological Properties for Automotive, Aerospace, and Military Applications by Sachin Kumar Sharma, Sandra Gajević, Lokesh Kumar Sharma, Reshab Pradhan, Yogesh Sharma, Ivan Miletić and Blaža Stojanović
3358	Review of Wear and Mechanical Characteristics of Al-Si Alloy Matrix Composites Reinforced with Natural Minerals by Varun Singhal, Daksh Shelly, Atul Babbar, Seul-Yi Lee and Soo-Jin Park

Views	Article
3567	Friction Torque in Miniature Ball Bearings by Denis Cojocaru, Gelu Ianuș, Vlad Cârlescu, Bogdan Chiriac and Dumitru Olaru
3172	The Effect of Geometrical Shape of Surface Texture on the Rheology and Tribology of Confined Lubricants by Fankai Peng and Ahmad Jabbarzadeh
2560	Tribological Investigation of the Surface Protective Layer-Forming Effect of a Nano-Sized Yttria–Silica Mixture as a Lubricating Oil Additive by Ádám István Szabó, Attila Csík, Tamás Fodor, Kálmán Vad, Márk Marsicki and Álmos Dávid Tóth
2375	Additive Manufacturing of Advanced Structural Ceramics for Tribological Applications: Principles, Techniques, Microstructure and Properties by Wei-Jian Miao, Shu-Qi Wang, Zi-Heng Wang, Fan-Bin Wu, Yun-Zhuo Zhang, Jia-Hu Ouyang, Ya-Ming Wang and Yong-Chun Zou
2278	A Review of Numerical Techniques for Frictional Contact Analysis by Govind Vashishtha, Sumika Chauhan, Riya Singh, Manpreet Singh and Ghanshyam G. Tejani
2241	Synthesis, Stability, and Tribological Performance of TiO₂ Nanomaterials for Advanced Applications by Kai Zeng, Liang Cheng, Wenjing Hu and Jiusheng Li
1831	Tribological Performance Comparison of Lubricating Greases for Electric Vehicle Bearings by Deepika Shekhawat, Ayush Jain, Nitesh Vashishtha, Arendra Pal Singh and Rahul Kumar
1823	Study of the Influence of Nanoparticle Reinforcement on the Mechanical and Tribological Performance of Aluminum Matrix Composites—A Review by Varun Singhal, Daksh Shelly, Abhishek Saxena, Rahul Gupta, Vipin Kumar Verma and Appurva Jain
1769	Comparative Study of Squalane Products as Sustainable Alternative to Polyalphaolefin: Oxidation Degradation Products and Impact on Physicochemical Properties by Jessica Pichler, Adam Agocs, Lucia Pisarova, Ichiro Minami, Marcella Frauscher and Nicole Dörr
1749	Multiple Regression Analysis and Non-Dominated Sorting Genetic Algorithm II Optimization of Machining Carbon-Fiber-Reinforced Polyethylene Terephthalate Glycol Parts Fabricated via Additive Manufacturing Under Dry and Lubricated Conditions by Anastasios Tzotzis, Nikolaos Efkolidis, Kai Cheng and Panagiotis Kyratsis

Views	Article
73631	Lubricants in Pharmaceutical Solid Dosage Forms by Jinjiang Li and Yongmei Wu
39621	Phosphate Esters, Thiophosphate Esters and Metal Thiophosphates as Lubricant Additives by David W. Johnson and John E. Hils
32165	Solid Lubrication with MoS₂: A Review by Mohammad R. Vazirisereshk, Ashlie Martini, David A. Strubbe and Mehmet Z. Baykara
31999	Water-Based Lubricants: Development, Properties, and Performances by Md Hafizur Rahman, Haley Warneke, Haley Webbert, Joaquin Rodriguez, Ethan Austin, Keli Tokunaga, Dipen Kumar Rajak and Pradeep L. Menezes
28618	Corrosion Inhibitors: Natural and Synthetic Organic Inhibitors by Ahmed A. Al-Amiery, Wan Nor Roslam Wan Isahak and Waleed Khalid Al-Azzawi
26935	Chemically Modifying Vegetable Oils to Prepare Green Lubricants by Gobinda Karmakar, Pranab Ghosh and Brajendra K. Sharma
26722	A Review of Ionic Liquid Lubricants by Anthony E. Somers, Patrick C. Howlett, Douglas R. MacFarlane and Maria Forsyth
25582	The Preparation of Graphene Oxide and Its Derivatives and Their Application in Bio-Tribological Systems by Jianchang Li, Xiangqiong Zeng, Tianhui Ren and Emile Van der Heide
25302	Experimental Investigations of Biological Lubrication at the Nanoscale: The Cases of Synovial Joints and the Oral Cavity by Javier Sotres and Thomas Arnebrant
21180	Dispersion of Nanoparticles in Lubricating Oil: A Critical Review by Yan Chen, Peter Renner and Hong Liang

More Articles...

Downloads	Article
9395	Elaboration of Ionic Liquids on the Anti-Wear Performance of the Reinforced Steel-Steel Contact Surface by Hua Jiang, Xianjun Hou, Yuxin Ma, Weiwei Guan, Haijun Liu and Yucong Qian
7989	Graphene as a Lubricant Additive for Reducing Friction and Wear in Its Liquid-Based Form by Ab Rahman Marlinda, Gregory Soon How Thien, Mehmood Shahid, Ting Yang Ling, Abu Hashem, Kah-Yoong Chan and Mohd Rafie Johan
7674	Lubricating Ability of Protic Ionic Liquids as Additives to a Biodegradable Oil for Aluminum-Steel Contact: Effect of Alkyl Chain Length and Propensity to Hydrogen Bonding by Hong Guo, Brandon Stoyanovich, Junru Pang and Patricia Iglesias
7633	Effect of Substrate Roughness and Contact Scale on the Tribological Performance of MoS₂ Coatings by Chen Wang, Jianjun Zhang, Kai Le, Yuqi Niu, Xiaoming Gao, Qinglun Che, Shusheng Xu, Yuzhen Liu and Weimin Liu
4988	Physics-Informed Machine Learning—An Emerging Trend in Tribology by Max Marian and Stephan Tremmel
4344	High-Temperature Solid Lubricants and Self-Lubricating Composites: A Critical Review by Jia-Hu Ouyang, Yu-Feng Li, Yun-Zhuo Zhang, Ya-Ming Wang and Yu-Jin Wang
4149	Corrosion Inhibitors: Natural and Synthetic Organic Inhibitors by Ahmed A. Al-Amiery, Wan Nor Roslam Wan Isahak and Waleed Khalid Al-Azzawi
3758	Effect of Contact Conformity on Grease Lubrication by Michal Okal, David Kostal, Petr Sperka, Ivan Krupka and Martin Hartl
3703	Friction Reduction Due to Heating in the Sliding Contact of Smart Coating: Modeling of Mutual Effect by Elena Torskaya and Fedor Stepanov
3586	Experimental Investigation into the Friction Coefficient of Ball-on-Disc in Dry Sliding Contact Considering the Effects of Surface Roughness, Low Rotation Speed, and Light Normal Load by Qi Wen, Mingming Liu, Zenglei Zhang and Yunyun Sun

Downloads	Article
7674	Lubricating Ability of Protic Ionic Liquids as Additives to a Biodegradable Oil for Aluminum-Steel Contact: Effect of Alkyl Chain Length and Propensity to Hydrogen Bonding by Hong Guo, Brandon Stoyanovich, Junru Pang and Patricia Iglesias
4988	Physics-Informed Machine Learning—An Emerging Trend in Tribology by Max Marian and Stephan Tremmel
2955	Tribological Synergism of Anodic Aluminum Oxide Surface Containing Micro-Holes and Nanopores under Lubricated Reciprocation by Minhaeng Cho
2347	Skidding Analysis of Exhaust Cam-Roller Unit in the Steady/Startup Operation of Internal Combustion Engine by Shuyi Li, Feng Guo, Pat Lam Wong, Peng Liang and Jisong Huang
2102	Forever Chemicals, Per-and Polyfluoroalkyl Substances (PFAS), in Lubrication by Darrius Dias, Jake Bons, Abhishek Kumar, M. Humaun Kabir and Hong Liang
1577	Physics-Informed Neural Network (PINN) for Solving Frictional Contact Temperature and Inversely Evaluating Relevant Input Parameters by Yichun Xia and Yonggang Meng
1413	Olive Pomace Oil as a Chainsaw Lubricant: First Results of Tests on Performance and Safety Aspects by Roberto Fanigliulo, Paolo Bondioli, Marcello Biocca, Renato Grilli, Pietro Gallo, Laura Fornaciari, Liliana Folegatti, Stefano Benigni, Igor Calderari, Francesco Gallucci and Daniele Pochi
1407	Application and Prospect of Wear Simulation Based on ABAQUS: A Review by Liang Yan, Linyi Guan, Di Wang and Dingding Xiang
1365	MoS₂ Nanomaterials as Lubricant Additives: A Review by Ziyan Lu, Qingqing Lin, Zhaotao Cao, Wanyuan Li, Junjie Gong, Yan Wang, Kunhong Hu and Xianguo Hu
1342	Research Progress of Antioxidant Additives for Lubricating Oils by Deping Xia, Yonggang Wang, Hui Liu, Jincan Yan, Hualin Lin and Sheng Han

Downloads	Article
887	A Review of Wear in Additive Manufacturing: Wear Mechanism, Materials, and Process by Xiangjun Jiang, Juntao Lu, Na Zhao, Zhen Chen and Zhiming Zhao
769	Progress in Aluminum-Based Composites Prepared by Stir Casting: Mechanical and Tribological Properties for Automotive, Aerospace, and Military Applications by Sachin Kumar Sharma, Sandra Gajević, Lokesh Kumar Sharma, Reshab Pradhan, Yogesh Sharma, Ivan Miletić and Blaža Stojanović
768	Plant-Based Oils for Sustainable Lubrication Solutions—Review by Diana Berman
688	Short-Term Influence of Water Ingress on Wear in Pitch Bearings of Wind Turbines by Matthias Stammler, Henry Ellerbrok, Rihard Pasaribu and Ulf Rieper
673	Physics-Informed Neural Networks for the Reynolds Equation with Transient Cavitation Modeling by Faras Brumand-Poor, Florian Barlog, Nils Plückhahn, Matteo Thebelt, Niklas Bauer and Katharina Schmitz
668	A Tribological Study of ta-C, ta-C:N, and ta-C:B Coatings on Plastic Substrates under Dry Sliding Conditions by Paul Neubauer, Frank Kaulfuss and Volker Weihnacht
660	Research Progress on Current-Carrying Friction with High Stability and Excellent Tribological Behavior by Peng Wei, Xueqiang Wang, Guiru Jing, Fei Li, Pengpeng Bai and Yu Tian
637	Review of Wear and Mechanical Characteristics of Al-Si Alloy Matrix Composites Reinforced with Natural Minerals by Varun Singhal, Daksh Shelly, Atul Babbar, Seul-Yi Lee and Soo-Jin Park
632	Numerical Simulations and Experimental Validation of Squeeze Film Dampers for Aircraft Jet Engines by Markus Golek, Jakob Gleichner, Ioannis Chatzisavvas, Lukas Kohlmann, Marcus Schmidt, Peter Reinke and Adrian Rienäcker
626	Multi-Parametric Investigations on White Etching Crack Formation in Deep Grove Ball Bearings by Manuel Zuercher, Eberhard Schlücker, Christian Spaeth and Walter Holweger

Downloads	Article
481	Additive Manufacturing of Advanced Structural Ceramics for Tribological Applications: Principles, Techniques, Microstructure and Properties by Wei-Jian Miao, Shu-Qi Wang, Zi-Heng Wang, Fan-Bin Wu, Yun-Zhuo Zhang, Jia-Hu Ouyang, Ya-Ming Wang and Yong-Chun Zou
459	A Review of Numerical Techniques for Frictional Contact Analysis by Govind Vashishtha, Sumika Chauhan, Riya Singh, Manpreet Singh and Ghanshyam G. Tejani
450	Low-Energy High-Current Pulsed Electron Beam Surface Treatment on the Tribological Behavior of 17-4PH Steel Produced via Binder Jetting by Lorenza Fabiocchi, Marco Mariani, Andrea Lucchini Huspek, Matteo Pozzi, Massimiliano Bestetti and Nora Lecis
429	Tribological Performance Comparison of Lubricating Greases for Electric Vehicle Bearings by Deepika Shekhawat, Ayush Jain, Nitesh Vashishtha, Arendra Pal Singh and Rahul Kumar
419	Study of the Influence of Nanoparticle Reinforcement on the Mechanical and Tribological Performance of Aluminum Matrix Composites—A Review by Varun Singhal, Daksh Shelly, Abhishek Saxena, Rahul Gupta, Vipin Kumar Verma and Appurva Jain
412	Development Status of Dynamic Sealing Technology and Discussion on Advanced Sealing Technologies by Yan Wang, Shuoshuo Niu, Jiahao Zhang, Cong Feng, Yutong Wang, Doudou Shen, Decai Li, Tong Li, Pengcheng Cao and Yufan Zhang
358	Comparative Study on the Leakage Characteristics and Parameter Influence of Bio-Inspired Fishway Staggered Labyrinth Seals by Zhentao Yu, Jinbo Jiang, Xuan Zhang, Mengli Zhang and Canlong Li
357	Synthesis, Stability, and Tribological Performance of TiO₂ Nanomaterials for Advanced Applications by Kai Zeng, Liang Cheng, Wenjing Hu and Jiusheng Li
340	Effect of Change in Material Properties of the Abradable Coating on the Wear Behavior of It—Microstructure Model-Based Analysis Approach by Anitha Kumari Azmeera, Prakash Jadhav and Chhaya Lande
337	The Low Friction Coefficient and High Wear Resistance UHMWPE: The Effect of Pores on Properties of Artificial Joint Materials by Chunmin Yang, Junhua Zhang, Honglin Yue and Xueqin Kang

Downloads	Article
116218	Lubricants in Pharmaceutical Solid Dosage Forms by Jinjiang Li and Yongmei Wu
25491	Survey of Damage Investigation of Babbitted Industrial Bearings by Lyle A. Branagan
24109	The Preparation of Graphene Oxide and Its Derivatives and Their Application in Bio-Tribological Systems by Jianchang Li, Xiangqiong Zeng, Tianhui Ren and Emile Van der Heide
22597	Phosphate Esters, Thiophosphate Esters and Metal Thiophosphates as Lubricant Additives by David W. Johnson and John E. Hils
20363	Direct Laser Interference Patterning: Tailoring of Contact Area for Frictional and Antibacterial Properties by Andreas Rosenkranz, Michael Hans, Carsten Gachot, Adrian Thome, Simon Bonk and Frank Mücklich
19934	Influence of Test Stand and Contact Size Sensitivity on the Friction Coefficient in Sheet Metal Forming by Viktor Recklin, Florian Dietrich and Peter Groche
18486	Abrasive Resistant Coatings—A Review by Linmin Wu, Xingye Guo and Jing Zhang
15949	Study of the Lubricating Ability of Protic Ionic Liquid on an Aluminum–Steel Contact by Akshar Patel, Hong Guo and Patricia Iglesias
15467	Wear Performance of UHMWPE and Reinforced UHMWPE Composites in Arthroplasty Applications: A Review by Juan C. Baena, Jingping Wu and Zhongxiao Peng
15257	Solid Lubrication with MoS₂: A Review by Mohammad R. Vazirisereshk, Ashlie Martini, David A. Strubbe and Mehmet Z. Baykara

Avg. Citations	Special Issue
13.82	Methods of Application of Cutting Fluids in Machining Guest Editors Alisson Rocha Machado and Leonardo Rosa Ribeiro da Silva \| Number of Papers: 11
9.08	Recent Advances in Machine Learning in Tribology Guest Editors Max Marian and Stephan Tremmel \| Number of Papers: 13
7.25	Additives for Lubricating Oil and Grease: Mechanism, Properties and Applications Guest Editor Jingbin Han \| Number of Papers: 12
6.43	Laser Surface Engineering for Tribology Guest Editors Xiulin Ji and Yong Sun \| Number of Papers: 14
6.07	Advances in Bearing Lubrication and Thermodynamics 2023 Guest Editors Ke Yan , Bin Fang , Bei Yan and Fei Chen \| Number of Papers: 15

More Special Issues...

Views	Special Issue
60572	Current and Future Trends in Tribological Research: Fundamentals and Applications–The 10th Anniversary of Lubricants Guest Editors Patricia Johns-Rahnejat , Homer Rahnejat and Ramin Rahmani \| Number of Papers: 19
41221	Recent Advances in Machine Learning in Tribology Guest Editors Max Marian and Stephan Tremmel \| Number of Papers: 13
40642	Tribology in Germany: Latest Research and Development Guest Editor Dirk Bartel \| Number of Papers: 22
38773	Advances in Bearing Lubrication and Thermodynamics 2023 Guest Editors Ke Yan , Bin Fang , Bei Yan and Fei Chen \| Number of Papers: 15
37819	Tribology in Mobility, Volume II Guest Editors Hannes Allmaier and Sophia Bastidas \| Number of Papers: 12
35750	Laser Surface Engineering for Tribology Guest Editors Xiulin Ji and Yong Sun \| Number of Papers: 14
34193	Methods of Application of Cutting Fluids in Machining Guest Editors Alisson Rocha Machado and Leonardo Rosa Ribeiro da Silva \| Number of Papers: 11
33393	Additives for Lubricating Oil and Grease: Mechanism, Properties and Applications Guest Editor Jingbin Han \| Number of Papers: 12
31434	Advances in Contact Mechanics Guest Editors Haichao Liu , Haibo Zhang and Xiaoyu Ding \| Number of Papers: 12
30324	Friction and Wear of Cutting Tools and Cutting Tool Materials Guest Editors Guoliang Liu, Chuanzhen Huang, Xiangyu Wang, Bin Zhao and Min Ji \| Number of Papers: 15

More Special Issues...

Notable Authors

Name	Affiliation
Maria Forsyth	Australian chemist, Alfred Deakin Professor, Deakin University
Duncan Dowson	Distinguished Tribologist, one of the most important personalities in applied mechanics
B. N. J. Persson	Research scientist, Peter Grünberg Institute (PGI-1) and Institute for Advanced Simulation (IAS-1)
Nicholas D. Spencer	Full professor, ETH Zurich
Reshef Tenne	Israeli scientist, Weizmann Institute of Science
Pradeep Rohatgi	Distinguished Professor, Director of the Center for Composites, University of Wisconsin–Milwaukee
Robert J.K. Wood	Director of the UK National Centre for Advanced Tribology, University of Southampton
Rob Atkin	Conjoint Professor, The University of Western Australia
Jacqueline Krim	Distinguished University Professor of Physics, North Carolina State University
Daniel Rixen	Professor, Technische Universität München—TUM
Michael M. Khonsari	Dow Chemical Endowed Chair, Professor, Louisiana State University
Markus A. Wimmer	Professor, Rush University Medical Center, Director, Human Motion Analysis and Tribology
Niels Bay	Professor, Technical University of Denmark (DTU)
Valentin L. Popov	Russian Honorary Professor of theoretical physics, Technical University of Berlin
Roland Bennewitz	Professor, Head of Nanotribology, Leibniz Institute for New Materials
Ekkard Brinksmeier	Professor, Manufacturing Technologies, University of Bremen
Ashlie Martini	Professor of Mechanical Engineering, University of California Merced
Hong Liang	Oscar S. Wyatt Jr. Professor, Texas A&M University
Ilker S. Bayer	Dr., researcher in Istituto Italiano di Tecnologia
Ichiro Minami	Professor, Luleå University of Technology
Antonella Rossi	Professor, Università di Cagliari
Stephen C. Veldhuis	Director (MMRI) and Braley-Orlick Chair in Advanced Manufacturing Engineering, McMaster University
Anh Kiet Tieu	Senior Professor, University of Wollongong, member of ATSE
Shinya Sasaki	Professor, Tokyo University of Science
Sergio Valeri	Professor, Università degli Studi di Modena e Reggio Emilia
Luis Llanes	Professor of Materials Science and Engineering, Universitat Politècnica de Catalunya
Michel Fillon	Director of Research, Institut Pprime, CNRS, University of Poitiers
María-Dolores Bermúdez	Professor, Universidad Politecnica de Cartagena
Thomas Joyce	Chair in Orthopaedic Engineering, Professor, Newcastle University
Martin H. Müser	Professor, Universität des Saarlandes
Giuseppe Carbone	Professor, Head of the Department of Mechanics, Mathematics and Management, Politecnico di Bari Ital
Jean-Jacques Sinou	Professor, Ecole Centrale de Lyon & Institut Universitaire de France
Daniel Nelias	Professor, Univ Lyon, INSA-Lyon, CNRS
Christian Greiner	Emmy Noether Group Leader, KIT
Tarun Goswami	Professor of Biomedical Engineering, Wright State University
Yves Berthier	Directeur de Recherches CNRS
Roland Larsson	Head of Subject, Chaired Professor, Luleå University of Technology
Zhongxiao Peng	Professor, University of New South Wales
David L. Burris	Principal Investigator in Materials Tribology Laboratory, Associate Professor, University of Delawar
Dennis Fischer	Full Tenure Professor for Materials Science and Engineering, University Duisburg-Essen

Journal Menu

Journal Browser

Most Cited & Viewed

Most Cited & Viewed Papers

Most Cited & Viewed Special Issues

Notable Authors

Further Information

Guidelines

MDPI Initiatives

Follow MDPI