Powder deposition of even and homogeneous layers is a major aspect of every powder bed fusion process. Powder sieving is commonly performed to powder batches outside of the PBF machine, prior to the part manufacturing stage. In this work, sieving is...
The Laser-based Powder Bed Fusion (L-PBF) process uses a laser beam to selectively melt powder particles deposited in a layer-wise fashion to manufacture components derived from Computer-Aided Design (CAD) information. During laser processing, materi...
Brewers’ spent grain (BSG) is the primary by-product of beer production, and its potential use in food products is largely dependent on its processing, given its moisture content of up to 80%. This study aimed to evaluate the effects of physica...
The current study evaluated the effect of powder fractionation based on particle size on the chemical composition of macronutrients such as proteins and sugars, on the phytochemical properties (total content of polyphenolic compounds, vitamin C, and...
In the scope of this study, a powder mixture was prepared that contained 3 Al2O3-Y2O3 consisting of 99.99% pure Al2O3 and aluminum oxide of 65–67% and 70% by weight of 99.999% pure Y2O3 powders. After the powders were weighed on a precision scale, th...
The water-atomized ATOMET 28, 1001, 4701, and 4801 powders, manufactured by Rio Tinto Metal Powders, were used for additive manufacturing by a laser engineered net shaping (LENS) technique. Their overall morphology was globular and rounded with a siz...
Direct molding is a compression molding process of thermoset particles without the addition of any linking agent or binder. It is suitable for recycling end-of-life fiberglass or other waste from the manufacturing of fiberglass products. In this stud...
A triclinic SAPO-34 molecular sieve was synthesized ionothermally. The as-synthesized products were characterized by powder X-ray diffraction (XRD), scanning electron microscope (SEM), nuclear magnetic resonance (NMR), fourier infrared spectrometer (...
This study aims to apply the response surface methodology (RSM) to develop a statistical model that predicts and models the performance of both the fresh and hardened properties of self-compacting concrete (SCC). RSM was used to model processes invol...
This review explores the critical role of powder quality in metal 3D printing and the importance of effective powder recycling strategies. It covers various metal 3D printing technologies, in particular Selective Laser Melting, Electron Beam Melting,...
The final phase of powder production typically involves a mixing process where all of the particles are combined and agglomerated with a binder to form a single compound. The traditional means of inspecting the physical properties of the final produc...
Tunnel boring machine (TBM) materials are usually crushed powder obtained during tunnel excavations for subways and transportation networks. Huge quantities of crushed rock powder are generally treated as waste. This study is aimed at assessing propo...
In the manufacturing process of ship propellers, large quantities of grinding chips are generated. These grinding chips result from the finishing of the blade surfaces after the primary casting process of the propeller. The aim of this study was to i...
With the growing demand for aero-engine turbine blades, the resource consumption and environmental impact of superalloy powder in the manufacturing process have become increasingly significant. This study focuses on IN718 nickel-based superalloy powd...
Metal additive manufacturing (AM) processes, viz laser powder bed fusion (L-PBF), are becoming an increasingly popular manufacturing tool for a range of industries. The powder material used in L-PBF is costly, and it is rare for a single batch of pow...
This study explores a new perspective on triboelectrification that could potentially lead to the development of a non-destructive approach for the rapid characterization of powders. Sieved yellow pea powders at various particle sizes and protein cont...
The formation of silicoaluminophosphate gels using boehmite, Al isopropoxide, and di-n-propylamine as a template of silicoaluminophosphate gels as well as their subsequent crystallization into SAPO-11 molecular sieves was studied in detail using X-ra...
Nano-sized tungsten exhibits superior properties due to its high-density grain boundaries’ strengthening. The high-quality nano-sized powder is essential for sintering nano-sized tungsten bulks through powder metallurgy techniques. In this stud...
Conventional diamond powders (<10 μm) are generally produced from crushing large-sized diamonds synthesized by high-pressure and high-temperature (HPHT) technique, whereas they have many morphological imperfections. In the present work, these powd...
By using the ramping method for humidity at a constant temperature, the release rates of d-limonene were investigated from spray-dried powders with various wall materials, such as maltodextrin (MD) (dextrose equivalent (DE) = 25 and 19), lactose (Lac...
28 June 2023
Electrostatic charging of powders becomes important, when particles become smaller, especially for fine powders at micron or sub-micron size. Charging of powders causes strong particle adhesion and consequently difficulties in processes such as blend...
A mixture of abramis brama (freshwater bream), carassius carassius (crucian carp), and sander lucioperca (pike perch) scales was used for the preparation of fish scale powder containing constituents of organic and inorganic nature. The mixture of the...
In additive manufacturing, particularly with Laser–Powder-Bed Fusion (L-PBF), augmenting recycled powder with virgin powder is common to extend lifespan. This practice complicates tracking recycling cycles, as parts consist of layers from both...
The paper presents a novel dust detector based on an innovative laser system that can be successfully used in applications where continuous dust monitoring is necessary. The measurements obtained with FeNi18Co9Mo5 (maraging MS1 steel) particles are c...
This study investigates the physicochemical and toxicological properties of Scalmalloy powder emissions generated during Laser Powder Bed Fusion (LPBF), focusing on the impact of particle morphology, oxidation, and size distribution on biological res...
A novel structure aluminosilicate molecular sieve, named BUCT-3, was prepared by dynamic hydrothermal synthesis, and the critical factor to obtain the new structure is using an active silicon and aluminum source, aluminosilica perhydrate hydrogel. Me...
Three different metal-containing zinc phosphate, [C3H12N2][Zn0.5Fe1.5(PO4)2] (1), [C3H12N2][Zn0.67Co1.33(PO4)2] (2) and [C3H12N2][Zn0.67Ni1.33(PO4)2] (3) with EDI topology were prepared by sol–gel assisted hydrothermal method. The advantages of...
Coal combustion product in the form of fly ash has been sieved and successfully utilised as a main substrate and a carrier of silicon and aluminium in a set of hydrothermal syntheses of zeolites. The final product was abundant in zeolite X phase (Fau...
In acidic conditions, mesoporous molecular sieves SBA-15 and SBA-15-SH were synthesized. Structural characterization was carried out by powder X-ray diffraction (XRD), Fourier Transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM)...
The effect of synthesis conditions and niobium incorporation levels on the photocatalytic properties of Nb/MCM-41 molecular sieves was assessed. Niobium pentoxide supported on MCM-41 mesoporous silica was obtained using two methods: sol-gel and incip...
Hydrogen decrepitation (HD) is an effective and environmentally friendly technique for recycling of neodymium-iron-boron (NdFeB) magnets. During the HD process, the NdFeB breaks down into a matrix phase (Nd2Fe14BHx) and RE-rich grain boundary phase....
Pyrethroids are common contaminants in water bodies. In this study, an efficient mussel shell-based adsorbent was prepared, the effects of factors (calcination temperature, calcination time, and sieved particle size) on the pyrethroid adsorption capa...
Theobroma cacao L. (Cocoa) is an agricultural product that is economically valuable worldwide; it is rich in bioactive compounds such as phenolic compounds and flavonoids. These compounds are known for their anti-inflammatory, anticarcinogenic, antim...
Plant by-products are undervalued as they are an important source of nutrients and bioactive compounds with potential health benefits, which also contribute to aroma and color. Therefore, their use in human food is a challenging field of study that d...
This work reports the synthesis and characterization of a hybrid molecularly imprinted polymer (MIP) membrane for removal of methylene blue (MB) in an aqueous environment. MB-MIP powders were hybridized into a polymer membrane (cellulose acetate (CA)...
Developing inexpensive and rapid fabrication methods for high efficiency thermoelectric alloys is a crucial challenge for the thermoelectric industry, especially for energy conversion applications. Here, we fabricated large amounts of p-type Cu0.07Bi...
Energetic powder processing includes comminution, sieving, drying, conveying, mixing, and packaging, all of which determine product performance and safety. With growing requirements for efficiency and reliability, numerical simulation has become esse...
The paper focuses on a transition from studying synthetic analogs of rare titanosilicate minerals (lintisite, ivanyukite, and zorite) in the powdery state to investigating their new granulated forms. Five different methods for granulating titanosilic...
In the present study, an automatic defect detection system has been assembled and introduced for Polyvinyl chloride (PVC) powder. The average diameter for PVC powder is approximately 100 μm. The system hardware includes a powder delivery device, a...
Mild conditioned, second-life ternary nickel–cobalt–manganese (NCM) black powder regeneration from spent lithium-ion batteries’ (LIBs) black powder mixture was demonstrated after mild conditioned p-toluenesulphuric acid (PTA)-assist...
We have developed a new particle-mixing strategy for improving the fluidization hydrodynamics of Geldart group C powders by mixing with small proportions of group B particles. Two different group C particles with widely different physical properties,...
It is experimentally shown that a removal of particles exceeding 100 microns in size from iron powders typically used in the fabrication of medium density powder metallurgy steels has a weak effect on apparent density, flowability and compressibility...
Quasicrystalline Al93Fe3Cr2Ti2 (at.%) gas-atomized powders, which exhibit a metastable composite microstructure, were used to produce coatings by cold spray additive manufacturing processing (CSAM) using different processing parameters. The metastabl...
Powdered fiber- and polyphenol-rich ingredients derived from pear canning residues were obtained by direct processing. Residues were subjected to acid immersion and subsequent convective drying, milling, and sieving. Drying kinetics were studied to s...
Owing to the ongoing accumulation of industrial by-products, the management and disposal of waste have emerged as a significant issue. Employing these industrial wastes as an alternative to replace cement holds potential as a promising solution for c...
The chemical and physical properties of instant whole milk powder (IWMP), such as morphology, protein content, and particle size, can affect its functionality and performance. Bulk density, which directly determines the packing cost and transportatio...
Natural fillers have been widely explored to enhance the mechanical and barrier properties of biodegradable films. In this study, a mineral-rich powder obtained from the solid components of Ucides cordatus crab shells was processed (washing, drying,...
The aim of this work was to establish whether asbestos fibers homogeneously occur in the different fractions ground from naturally occurring asbestos lithotypes, and to calculate the contribution of fibers from each fraction to the overall concentrat...
The control of powder aging during Selective Laser Sintering (SLS) processing is one of the challenges to be overcome for the implementation of this technique in serial production. Aging phenomena, because of the elevated temperatures and long proces...
Oxy-fuel combustion combined with CCS (carbon capture and storage) aims to decrease CO2 emissions in energy production using fossil fuels. Oxygen firing changes power plant boiler conditions compared to conventional firing. Higher material temperatur...
of 3