5,132 Results Found

Several electrode materials have been developed to provide high energy density and a long calendar life at a low cost for lithium-ion batteries (LIBs). Iron (III) vanadate (FeVO₄), a semiconductor material that follows insertion/extraction chemistry...

Using coal-based solid waste (CSWM) to develop artificial soil (AS) can solve the shortage of planting soil in mine ecological restoration and realize the resource utilization of solid waste, which is a very promising research direction. This study u...

Rice, as a major food crop, provides necessary energy and nutrition for humans and livestock. However, its nutritional value is affected by lysine. Using point mutation, we previously obtained AK2 (aspartokinase) and DHDPS1 (dihydrodipicolinate synth...

Environmental and energy sustainability concerns have catalyzed a global transition toward renewable biofuel alternatives. Among these, biodiesel stands out as a promising substitute for conventional diesel in compression-ignition engines, providing...

Oats (Avena sativa L.) are forage grasses moderately tolerant to saline-alkali soil and are widely used for the improvement and utilization of saline-alkali land. Using the oat varieties collected from the Qaidam Basin as experimental materials, base...

Ultrasound technique was used to produce native and acetylated cassava starch particles containing potassium sorbate (KS). In order to obtain an active packaging, films with addition of native starch particles containing KS (NKSPF) or added with acet...

Sintering-free lightweight aggregates were prepared with high proportions of red mud and a binder material derived from whole solid wastes through rolling granulation at room temperature. The preparation process was optimized by changing the material...

For supported catalysts, the synergistic effect of physicochemical properties (including oxygen storage capacity (OSC), metal–support interaction, dispersion, and reducibility) is crucial for methane partial oxidation (POM). This study aims to...

Numerous commercial products are used in poultry farms to maintain water quality and prevent pathogen dispersion, but their actual impact on broiler chicks’ performance and gut health remains underreported. This study aimed to investigate the e...

Currently, the production of radioactive waste from nuclear industries is increasing, leading to the development of reliable containment strategies. The deep geological repository (DGR) concept has emerged as a suitable storage solution, involving th...

In this study, differences in the protein content and functional and physicochemical properties of four varieties of egg white (EW) were studied by adding 4–10% sucrose or NaCl and then heating them at 70 °C for 3 min. According to a high-p...

Membrane support properties influence the performance of thin-film composite nanofiltration membranes. We fabricated several polysulfone (PSf) supports. The physicochemical properties of PSf were altered by adding polyethylene glycol (PEG) of varying...

The catalytic combustion of toluene over cryptomelane and Cu-doped cryptomelane catalysts was investigated to evaluate the effect of copper incorporation on catalytic performance. It was found that a small addition of Cu into the cryptomelane framewo...

Nanocrystalline materials (NCM, i.e., crystalline nanoparticles) have become an important class of materials with great potential for applications ranging from drug delivery and electronics to optics. Drug nanocrystals (NC) and nano co-crystals (NCC)...

The application of highly active nano catalysts in advanced oxidation processes (AOPs) improves the production of non-selective hydroxyl radicals and co-oxidants for complete remediation of polluted water. This study focused on the synthesis and char...

This study aimed to investigate the enhancement of cannabinoid acid solubility and stability through the formation of a cannabinoid acid/cyclodextrin (CD) inclusion complex. Two cannabinoid acids, tetrahydro-cannabinolic acid (THCA) and cannabidiolic...

Due to storage stability drawbacks of polymer-modified bitumen (PMB), this study investigated the storage stability and physicochemical performance of Styrene-Butadiene-Styrene (SBS) asphalt binders (herein PMB) modified with Silicone surface-treated...

Neem leaf extracts (NLEs) have frequently been used to inhibit plant diseases and for the development of bio-fertilizer, leading to the commercial exploitation of this tree. However, previous studies have indicated contradictory outcomes when NLE was...

Ceria-based mixed oxides have been widely studied in catalysis due to their unique surface and redox properties, with implications in numerous energy- and environmental-related applications. In this regard, the rational design of ceria-based composit...

Photodegradation is a sustainable green technology that has been studied worldwide, especially for wastewater treatment. The calcination temperature has an important impact on the physicochemical properties of the prepared photocatalysts. In this stu...

Perfluorosulfonic acid (PFSA) polymers such as Nafion are the most frequently used Proton Exchange Membrane (PEM) in PEM fuel cells. Nafion XL is one of the most recently developed membranes designed to enhance performance by employing a mechanically...

Safe antibiotic substitutes are needed given the rise in antimicrobial resistance, environmental contamination, and stringent antibiotic regulations. Insect-derived antimicrobial peptides (AMPs) are promising candidates due to their antimicrobial act...

Metal conditioners (MC) are added to lubricants to enhance their friction and wear in friction pairs, mainly in engines, gearboxes, and rolling bearings. Its growth in the Brazilian market is primarily focused on internal combustion engines. The effe...

This study reports on the physicochemical and antioxidant properties of propolis samples from various regions across Western Australia and identifies some phenolic constituents using high-performance thin-layer chromatography (HPTLC). Total phenolic...

Selective catalytic reduction of nitrogen oxides with NH₃ (NH₃-SCR) is still the most commonly used control technology for nitrogen oxides emission. Specifically, the application of rare earth materials has become more and more extensive. CeO₂ was wi...

In modern dual-pressure nitric acid plants, the tail gas temperature usually exceeds 300 °C. The NH₃-SCR catalyst used in this temperature range must be resistant to thermal deactivation, so commercial vanadium-based systems, such as V₂O₅-WO₃ (Mo...

When developing an amorphous solid dispersion (ASD), a prudent choice of polymer is critical to several aspects of ASD performance including: processability, solid state stability and dissolution rate. However, there is little guidance available to f...

In order to investigate the effects of using different levels of either raw or processed amaranth (Amaranthus hybridus chlorostachys) grain on performance productivity, egg physicochemical properties, blood biochemistry and egg fatty acids, a trial w...

This paper presents a study of the characteristic effects of the physicochemical properties of microcrystalline cellulose and a series of biocarbon samples produced from this raw material through thermal conversion at temperatures ranging from 200 &d...

Most of the currently used products for repairing and conditioning hair rely on the deposition of complex formulations, based on mixtures involving macromolecules and surfactants, onto the surface of hair fibers. This leads to the partial covering of...

Enhancers are short deoxyribonucleic acid fragments that assume an important part in the genetic process of gene expression. Due to their possibly distant location relative to the gene that is acted upon, the identification of enhancers is difficult....

For an iron-chromium redox flow battery (ICRFB), sulfonated poly(ether ether ketone) (SPEEK) membranes with five various degrees of sulfonation (DSs) are studied. To select the SPEEK membrane with the ideal DS for ICRFB applications, the physicochemi...

The aim of our study is based on the characterization of the effluents treated by the M’zar plant, the monitoring of its purification performance after each treatment stage and the benefits of treated wastewater reuse in Souss-Massa region. Physico-c...

Developing puff pastry (PP) laminating fats (LFs) with sustainable structured olive pomace oil (OPO) could contribute to its increased valorization. This study evaluated the physicochemical stability of four OPO-based LFs or margarines and the perfor...

Waste stabilization ponds (WSPs) as natural wastewater treatment plants are commonly utilized for wastewater treatment due to their simple design, low cost, and low-skilled operator requirements. Large-scale studies assessing the performance of WSPs...

Reducing the intake of trans and saturated fatty acids is a trend in healthy eating. In this study, the oleogels were prepared from rice bran oil (RBO), candle wax (CDW), beeswax (BW), rice bran wax (RBW), and carnauba wax (CRW), respectively, and th...

To reduce the economic impact caused by the fossil fuel crisis and avoid relying on existing biofuels, it is important to seek locally available and renewable biofuel throughout the year. In the present work, a new light biofuel—Melaleuca Cajup...

This study aimed to evaluate how different percentages of guar meal in feed rations for broiler chickens affect their rearing performance and carcass composition. The experiment was conducted in a group of one hundred sixty Ross 308 broilers randomly...

Collagen-based materials are widely used as adhesives in medicine and cosmetology. However, for several applications, their properties require modification. In this work, the influence of Melissa officinalis on the properties of collagen films was st...

Stroke was always a disease that threatened human life and health worldwide. We reported the synthesis of a new type of hyaluronic acid-modified multi-walled carbon nanotube. Then, we produced hydroxysafflor yellow A-hydroxypropyl-β-cyclodextrin...

During Pecorino Romano PDO cheese production, scotta (residual whey from ricotta cheese manufacturing) or siero (whey) can be integrated with autochthonous starters, natural and composed of an indefinite number of species and strains, or commercial s...

Ball milling, as a cost-effective and eco-friendly approach, has been popular in materials synthesis to solve problems involving toxic reagents, high temperatures, or high pressure, which has the potential for large-scale production. However, there a...

Recently, the growing release of CeO₂ nanoparticles (CeO₂ NPs) into sewage systems has attracted great concern. Several studies have extensively explored CeO₂ NPs’ potential adverse impacts on wastewater treatment plants; however, the impaired...

Background: Nanocrystals, a carrier-free nanotechnology, offer significant advantages for pulmonary drug delivery by enhancing the dissolution and solubility of poorly soluble drugs while maintaining favorable biological properties and low toxicity....

The high-quality reutilization of waste styrene–butadiene–styrene copolymer (SBS) modified asphalt mixtures is a difficult issue in the field of highways today, and the main reason is that conventional rejuvenation technology fails to ach...

Antibiotic-resistant bacteria pose one of the major threats to human health worldwide. The issue is fundamental in the case of chronic wound treatment. One of the latest trends to overcome the problem is the search for new antibacterial agents based...

Honey has widespread use as a nutritional supplement and flavouring agent. Its diverse bioactivities, including antioxidant, antimicrobial, antidiabetic, anti-inflammatory, and anticancer properties, have also made it an aspirant natural product for...

Mixed oxide Ir-Sn-Sb-O electrocatalyst was synthesized using thermal decomposition from chloride precursors in ethanol. Our previous results showed that Ir-Sn-Sb-O possesses electrocatalytic activity for an oxygen evolution reaction (OER) in acidic m...

Collagen was obtained from porcine skin by mechanical pretreatments with the aim of preserving the triple helix structure of native collagen, which was indirectly corroborated by differential scanning calorimetry (DSC) and Fourier transform infrared...

This study investigates the influence of epichlorohydrin (EPCH) concentration on the rheological, mechanical, and swelling properties of lignin/PVA hydrogels. Hydrogels were prepared with EPCH concentrations ranging from 2.5% to 7.5%, and their visco...