Skip to Content

202 Results Found

  • Article
  • Open Access
143 Citations
21,077 Views
12 Pages

Development of Micro-Heaters with Optimized Temperature Compensation Design for Gas Sensors

  • Woo-Jin Hwang,
  • Kyu-Sik Shin,
  • Ji-Hyoung Roh,
  • Dae-Sung Lee and
  • Sung-Hoon Choa

1 March 2011

One of the key components of a chemical gas sensor is a MEMS micro-heater. Micro-heaters are used in both semiconductor gas sensors and NDIR gas sensors; however they each require different heat dissipation characteristics. For the semiconductor gas...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
19 Citations
4,030 Views
13 Pages

Fabrication of Low-Cost Resistance Temperature Detectors and Micro-Heaters by Electrohydrodynamic Printing

  • Salman Ahmad,
  • Khalid Rahman,
  • Taqi Ahmad Cheema,
  • Muhammad Shakeel and ,
  • Arshad Khan and
  • Amine Bermak
  • + 1 author+ 0 author

28 August 2022

EHD printing is an advanced deposition technology that is commonly utilized for the direct manufacture of electrical devices. In this study, meander-type resistive electrodes consisting of silver nanoparticles were printed directly on rigid glass and...

(This article belongs to the Section D3: 3D Printing and Additive Manufacturing)
  • Article
  • Open Access
1 Citations
2,693 Views
16 Pages

Performance Evaluation Methodology for Patterned Micro-Heaters Used in Gas Sensor Applications

  • Jiyoung Yoon,
  • Yuntae Ha,
  • Juhye Kim,
  • Dong Geon Jung and
  • Jinhyoung Park

24 December 2025

Hazardous gas detection requires portable, low-power sensors with high sensitivity, where micro-heater design is critical for semiconductor metal oxide (SMO) sensors. This study presents a standardized evaluation framework for quantitatively comparin...

(This article belongs to the Section Electrical, Electronics and Communications Engineering)
  • Article
  • Open Access
18 Citations
4,723 Views
11 Pages

11 April 2022

Thin-film microdevices can be applied to various wearable devices due to their high flexibility compared to conventional bulk-type electronic devices. Among the various microdevice types, many IoT-based sensor devices have been developed recently. In...

(This article belongs to the Special Issue Polymer-Based Materials for Sensors)
  • Article
  • Open Access
13 Citations
3,399 Views
12 Pages

Low-Voltage-Driven SnO2-Based H2S Microsensor with Optimized Micro-Heater for Portable Gas Sensor Applications

  • Dong Geon Jung,
  • Junyeop Lee,
  • Jin Beom Kwon,
  • Bohee Maeng and ,
  • Hee Kyung An and
  • Daewoong Jung
  • + 1 author+ 0 author

27 September 2022

To realize portable gas sensor applications, it is necessary to develop hydrogen sulfide (H2S) microsensors capable of operating at lower voltages with high response, good selectivity and stability, and fast response and recovery times. A gas sensor...

(This article belongs to the Special Issue NANO KOREA 2022)
  • Article
  • Open Access
32 Citations
9,123 Views
11 Pages

Measurement of Heat Dissipation and Thermal-Stability of Power Modules on DBC Substrates with Various Ceramics by SiC Micro-Heater Chip System and Ag Sinter Joining

  • Dongjin Kim,
  • Yasuyuki Yamamoto,
  • Shijo Nagao,
  • Naoki Wakasugi and ,
  • Chuantong Chen and
  • Katsuaki Suganuma
  • + 1 author+ 0 author

31 October 2019

This study introduced the SiC micro-heater chip as a novel thermal evaluation device for next-generation power modules and to evaluate the heat resistant performance of direct bonded copper (DBC) substrate with aluminum nitride (AlN-DBC), aluminum ox...

(This article belongs to the Special Issue Wide Bandgap Based Devices: Design, Fabrication and Applications)
  • Article
  • Open Access
13 Citations
6,407 Views
11 Pages

Fabrication of printed electronic devices along with other parts such as supporting structures is a major problem in modern additive fabrication. Solution-based inkjet printing of metal oxide semiconductor usually requires a heat treatment step to fa...

(This article belongs to the Special Issue 3D Printing of MEMS Technology)
  • Article
  • Open Access
90 Citations
19,515 Views
12 Pages

A MEMS-based Benzene Gas Sensor with a Self-heating WO3 Sensing Layer

  • Ming-Tsun Ke,
  • Mu-Tsun Lee,
  • Chia-Yen Lee and
  • Lung-Ming Fu

21 April 2009

In the study, a MEMS-based benzene gas sensor is presented, consisting of a quartz substrate, a thin-film WO3 sensing layer, an integrated Pt micro-heater, and Pt interdigitated electrodes (IDEs). When benzene is present in the atmosphere, oxidation...

(This article belongs to the Special Issue Gas Sensors 2009)
  • Article
  • Open Access
28 Citations
5,392 Views
10 Pages

Design and Thermal Analysis of Flexible Microheaters

  • Dezhao Li,
  • Yangtao Ruan,
  • Chuangang Chen,
  • Wenfeng He and ,
  • Cheng Chi and
  • Qiang Lin
  • + 1 author+ 0 author

29 June 2022

With the development of flexible electronics, flexible microheaters have been applied in many areas. Low power consumption and fast response microheaters have attracted much attention. In this work, systematic thermal and mechanical analyses were con...

(This article belongs to the Special Issue Structural Analyses and Designs for Flexible/Stretchable Electronics)
  • Article
  • Open Access
25 Citations
9,857 Views
18 Pages

Fabrication and Characterization of the Micro-Heater and Temperature Sensor for PolyMUMPs-Based MEMS Gas Sensor

  • Abdullah S. Algamili,
  • Mohd Haris Khir,
  • Abdelaziz Y. Ahmed,
  • Almur A. Rabih and ,
  • Saeed S. Ba-Hashwan,
  • Sami S. Alabsi,
  • Osamah L. Al-Mahdi,
  • Usman B. Isyaku,
  • Mawahib G. Ahmed and
  • Muhammad Junaid
  • + 5 authors+ 0 author

26 March 2022

This work describes the fabrication and characterization of a Micro-Electro-Mechanical System (MEMS) sensor for gas sensing applications. The sensor is based on standard PolyMUMPs (Polysilicon Multi-Users MEMS Process) technology to control the tempe...

(This article belongs to the Special Issue MEMS Devices for Nanomanufacturing)
  • Article
  • Open Access
5 Citations
2,903 Views
15 Pages

20 May 2022

The development of variotherm systems has helped to improve the quality of micro-injection molded products. Thin electric heaters have significant advantages in size, efficiency and installation convenience. However, the use of thin electric heaters...

  • Article
  • Open Access
4 Citations
2,953 Views
15 Pages

A Novel Flexible Liquid Metal Microheater with a Textured Structure

  • Yuqing Li,
  • Huimin Zhang,
  • Zi Ye,
  • Mingyang Liu and ,
  • Wei Liu,
  • Zhenming Li and
  • Lin Gui
  • + 2 authors+ 0 author

29 December 2023

In this paper, we propose a novel liquid metal microheater utilizing a textured structure. This microheater effectively solves the problem of the liquid metal in the PDMS flow channel fracturing at a certain temperature and significantly increases th...

(This article belongs to the Section E: Engineering and Technology)
  • Article
  • Open Access
12 Citations
3,431 Views
14 Pages

Microheater Topology for Advanced Gas Sensor Applications with Carbyne-Enriched Nanomaterials

  • Mariya Aleksandrova,
  • Belgina Ustova,
  • Tsvetozar Tsanev,
  • Ioannis Raptis and ,
  • Angeliki Tserepi,
  • Evangelos Gogolides and
  • Georgi Kolev
  • + 2 authors+ 0 author

21 February 2024

The response characteristics of carbyne-enriched surface-acoustic-wave (SAW)-based gas sensors utilizing meander and rectangular microheater topologies were investigated to assess their desorption and recovery properties. Comparative analysis of cont...

(This article belongs to the Section Nanotechnology and Applied Nanosciences)
  • Article
  • Open Access
11 Citations
7,044 Views
15 Pages

Development of a Microheater with a Large Heating Area and Low Thermal Stress in the Heating Area

  • Tao Zhang,
  • Zequan Pan,
  • Chunhua Zhang,
  • Liuguang Xiong and ,
  • Chunmei Yang,
  • Jian Zhang,
  • Mengjiao Shi,
  • Yuhang Wang and
  • Wen Qu
  • + 4 authors+ 0 author

12 January 2024

In this paper, a microheater that can absorb thermal stress and has a large heating area is demonstrated by optimizing the structure and process of the microheater. Four symmetrically distributed elongated support beam structures were machined around...

(This article belongs to the Section E: Engineering and Technology)
  • Article
  • Open Access
12 Citations
3,265 Views
12 Pages

23 August 2022

This paper examines the simulation, design, and fabrication of a nano-particle silver microheater. COMSOL Multiphysics is used to simulate the microheater of an area of 720 × 720 μm2. Different stages of the microheater fabrication process a...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Feature Paper
  • Article
  • Open Access
15 Citations
4,547 Views
13 Pages

A Performance-Enhanced Liquid Metal-Based Microheater with Parallel Ventilating Side-Channels

  • Lunjia Zhang,
  • Pan Zhang,
  • Ronghang Wang,
  • Renchang Zhang and ,
  • Zhenming Li,
  • Wei Liu,
  • Qifu Wang,
  • Meng Gao and
  • Lin Gui
  • + 4 authors+ 0 author

24 January 2020

Gallium-based liquid metal can be used as a material for microheaters because it can be easily filled into microchannels and electrified to generate Joule heat, but the liquid metal-based microheater will suffer breakage induced by voids forming with...

(This article belongs to the Special Issue Micro Process-Devices)
  • Article
  • Open Access
34 Citations
5,695 Views
19 Pages

Optimization of a Low-Power Chemoresistive Gas Sensor: Predictive Thermal Modelling and Mechanical Failure Analysis

  • Andrea Gaiardo,
  • David Novel,
  • Elia Scattolo,
  • Michele Crivellari and ,
  • Antonino Picciotto,
  • Francesco Ficorella,
  • Erica Iacob,
  • Alessio Bucciarelli,
  • Luisa Petti and
  • Alvise Bagolini
  • + 6 authors+ 1 author

25 January 2021

The substrate plays a key role in chemoresistive gas sensors. It acts as mechanical support for the sensing material, hosts the heating element and, also, aids the sensing material in signal transduction. In recent years, a significant improvement in...

(This article belongs to the Special Issue Advanced Micro and Nano Technologies for Gas Sensing)
  • Feature Paper
  • Article
  • Open Access
2 Citations
5,650 Views
8 Pages

Enhanced Plasmonic Wavelength Selective Infrared Emission Combined with Microheater

  • Hiroki Ishihara,
  • Katsuya Masuno,
  • Makoto Ishii,
  • Shinya Kumagai and
  • Minoru Sasaki

14 September 2017

The indirect wavelength selective thermal emitter that we have proposed is constructed using a new microheater, demonstrating the enhancement of the emission peak generated by the surface plasmon polariton. The thermal isolation is improved using a 2...

(This article belongs to the Special Issue Advance in Plasmonics and Metamaterials)
  • Article
  • Open Access
12 Citations
6,024 Views
9 Pages

Long-Term Operational Stability of Ta/Pt Thin-Film Microheaters: Impact of the Ta Adhesion Layer

  • Ivan A. Kalinin,
  • Ilya V. Roslyakov,
  • Dmitry N. Khmelenin and
  • Kirill S. Napolskii

25 December 2022

Microheaters with long-term stability are crucial for the development of a variety of microelectronic devices operated at high temperatures. Structured Ta/Pt bilayers, in which the Ta sublayer ensures high adhesion of the Pt resistive layer, are wide...

(This article belongs to the Special Issue Nano-Scale Microstructure Evolution, Micromechanics Behavior and Surface Control in Additive Manufacturing)
  • Brief Report
  • Open Access
4 Citations
3,872 Views
11 Pages

19 September 2020

Low power consumption is one of the critical factors for successful Internet of Things (IoT) applications. In such applications, gas sensors have become a main source of power consumption because energy conversion efficiency of the microheater is rel...

(This article belongs to the Special Issue Advanced Interface Circuits for Sensor Systems)
  • Article
  • Open Access
2 Citations
893 Views
18 Pages

14 February 2026

Hydrogen is a key energy carrier for fuel cell vehicles and hydrogen energy systems. However, its colorless and odorless nature, combined with a wide flammability range, poses significant safety risks in the event of leakage. Accordingly, compact and...

(This article belongs to the Special Issue Electrochemical Sensors and Biosensors: Materials, Methods and Applications)
  • Article
  • Open Access
8 Citations
8,708 Views
16 Pages

Self-Test Procedures for Gas Sensors Embedded in Microreactor Systems

  • Andreas Helwig,
  • Angelika Hackner,
  • Gerhard Müller,
  • Dario Zappa and
  • Giorgio Sberveglieri

3 February 2018

Metal oxide (MOX) gas sensors sensitively respond to a wide variety of combustible, explosive and poisonous gases. However, due to the lack of a built-in self-test capability, MOX gas sensors have not yet been able to penetrate safety-critical applic...

(This article belongs to the Special Issue Gas Sensors based on Semiconducting Metal Oxides)
  • Article
  • Open Access
1 Citations
2,892 Views
14 Pages

Study on Heat and Mass Transfer Performance of Ultra-Thin Micro-Heat Pipes

  • Yuming Xiang,
  • Yonghua Sun,
  • Guolin Li,
  • Xiangjuan Liu and ,
  • Lin Liu,
  • Fangwei Zhao and
  • Xibing Li
  • + 2 authors+ 0 author

11 July 2024

With increased heat control requirements for high-heat-flux products in a narrow heat dissipation space, the ultra-thin micro-heat pipe (MHP) with high heat transfer performance has become an ideal heat dissipation component. In this study, the compu...

(This article belongs to the Topic Applied Heat Transfer)
  • Article
  • Open Access
1 Citations
1,737 Views
17 Pages

The proper usage of a bandwidth-limited imaging bolometer for the measurement of the lateral temperature profile of microstructures in Silicon-Carbide (SiC) is analyzed. The SiC spectral emissivity, ϵSiC(λ), has a dip at λ∼12&...

  • Article
  • Open Access
102 Citations
21,023 Views
12 Pages

New Digital Metal-Oxide (MOx) Sensor Platform

  • Daniel Rüffer,
  • Felix Hoehne and
  • Johannes Bühler

31 March 2018

The application of metal oxide gas sensors in Internet of Things (IoT) devices and mobile platforms like wearables and mobile phones offers new opportunities for sensing applications. Metal-oxide (MOx) sensors are promising candidates for such applic...

(This article belongs to the Special Issue Gas Sensors based on Semiconducting Metal Oxides)
  • Proceeding Paper
  • Open Access
3 Citations
2,727 Views
5 Pages

Platinum Based Material for Additive Technology of Gas Sensors

  • Alexey A. Vasiliev,
  • Vitaliy P. Kim,
  • Sergey V. Tkachev,
  • Denis Yu. Kornilov and ,
  • Sergey P. Gubin,
  • Ivan S. Vlasov,
  • Igor E. Jahatspanian and
  • Alexy S. Sizov
  • + 3 authors+ 0 author

20 December 2018

We prepared platinum nanoparticle ink usable for the fabrication of MEMS microheaters

of high-temperature gas sensors and thermoresistors operating up to 450 °C and present some

preliminary results on the application of the ink in sensor microheate...

(This article belongs to the Proceedings of EUROSENSORS 2018)
  • Article
  • Open Access
7 Citations
3,757 Views
16 Pages

26 April 2024

Tungsten (W) film is increasingly utilized in various microheater applications due to its numerous advantages. These advantages include a high melting point, positive constant temperature coefficient of resistance (TCR), good mechanical stability, an...

(This article belongs to the Special Issue Thin Film Deposition: From Fundamental Research to Applications)
  • Article
  • Open Access
42 Citations
11,579 Views
17 Pages

5 January 2020

Nano-silver paste, as an important basic material for manufacturing thick film components, ultra-fine circuits, and transparent conductive films, has been widely used in various fields of electronics. Here, aiming at the shortcomings of the existing...

  • Article
  • Open Access
25 Citations
11,494 Views
17 Pages

29 August 2011

This study reports an integrated microfluidic perfusion cell culture system consisting of a microfluidic cell culture chip, and an indium tin oxide (ITO) glass-based microheater chip for micro-scale perfusion cell culture, and its real-time microscop...

(This article belongs to the Section Biosensors)
  • Article
  • Open Access
5 Citations
3,854 Views
19 Pages

Heavily-Doped Bulk Silicon Sidewall Electrodes Embedded between Free-Hanging Microfluidic Channels by Modified Surface Channel Technology

  • Yiyuan Zhao,
  • Henk-Willem Veltkamp,
  • Thomas V. P. Schut,
  • Remco G. P. Sanders and ,
  • Bogdan Breazu,
  • Jarno Groenesteijn,
  • Meint J. de Boer,
  • Remco J. Wiegerink and
  • Joost C. Lötters
  • + 4 authors+ 0 author

Surface Channel Technology is known as the fabrication platform to make free-hanging microchannels for various microfluidic sensors and actuators. In this technology, thin film metal electrodes, such as platinum or gold, are often used for electrical...

(This article belongs to the Special Issue MFHS 2019)
  • Article
  • Open Access
6 Citations
6,025 Views
12 Pages

26 December 2022

The performance of microelectromechanical system (MEMS) inertial measurement units (IMUs) is susceptible to many environmental factors. Among different factors, temperature is one of the most challenging issues. This report reveals the bias stability...

(This article belongs to the Special Issue Chip-Based MEMS Platforms)
  • Article
  • Open Access
5 Citations
4,696 Views
11 Pages

A Thermopile-Based Gas Flow Sensor with High Sensitivity for Noninvasive Respiration Monitoring

  • Zemin Liu,
  • Chenchen Zhang,
  • Xuefeng Ding,
  • Yue Ni and ,
  • Na Zhou,
  • Yanhong Wang and
  • Haiyang Mao
  • + 2 authors+ 0 author

23 April 2023

In this work, a N/P polySi thermopile-based gas flow device is presented, in which a microheater distributed in a comb-shaped structure is embedded around hot junctions of thermocouples. The unique design of the thermopile and the microheater effecti...

(This article belongs to the Section D1: Semiconductor Devices)
  • Article
  • Open Access
3 Citations
3,135 Views
14 Pages

High-Performance, Easy-to-Fabricate, Nanocomposite Heater for Life Sciences and Biomedical Applications

  • Yudan Whulanza,
  • Husein Ammar,
  • Deni Haryadi,
  • Azizah Intan Pangesty and ,
  • Widoretno Widoretno,
  • Didik Tulus Subekti and
  • Jérôme Charmet
  • + 2 authors+ 0 author

20 April 2024

Microheaters are used in several applications, including medical diagnostics, synthesis, environmental monitoring, and actuation. Conventional microheaters rely on thin-film electrodes microfabricated in a clean-room environment. However, low-cost al...

(This article belongs to the Special Issue Polymer-Containing Nanomaterials: Synthesis, Properties, Applications)
  • Article
  • Open Access
9 Citations
4,676 Views
22 Pages

Design and Fabrication of CMOS Microstructures to Locally Synthesize Carbon Nanotubes for Gas Sensing

  • Avisek Roy,
  • Mehdi Azadmehr,
  • Bao Q. Ta,
  • Philipp Häfliger and
  • Knut E. Aasmundtveit

8 October 2019

Carbon nanotubes (CNTs) can be grown locally on custom-designed CMOS microstructures to use them as a sensing material for manufacturing low-cost gas sensors, where CMOS readout circuits are directly integrated. Such a local CNT synthesis process usi...

(This article belongs to the Special Issue Advanced Nanomaterials based Gas Sensors)
  • Article
  • Open Access
2 Citations
8,943 Views
13 Pages

4 July 2011

This paper presents a micro-fluid gathering tool for a versatile capsular endoscope that employs a solid chemical propellant, azobisisobutyronitrile (AIBN). The proposed tool consists of a micro-heater, an AIBN matrix, a Venturi tube, a reservoir, an...

(This article belongs to the Section Biosensors)
  • Proceeding Paper
  • Open Access
2 Citations
2,765 Views
5 Pages

Enhanced Sensing Performance of Integrated Gas Sensor Devices

  • Ayoub Lahlalia,
  • Olivier Le Neel,
  • Ravi Shankar,
  • Siegfried Selberherr and
  • Lado Filipovic

7 December 2018

Semiconducting metal oxide (SMO) gas sensors, dedicated to wearable devices were designed, fabricated, and characterized in terms of power consumption, thermal distribution, and sensing capability. The sensors demonstrate a sensitivity down to ppb-le...

(This article belongs to the Proceedings of EUROSENSORS 2018)
  • Article
  • Open Access
4 Citations
3,883 Views
10 Pages

A Highly Accurate Method for Measuring Response Time of MEMS Thermopiles

  • Zeqing Xiang,
  • Meng Shi,
  • Na Zhou,
  • Chenchen Zhang and ,
  • Xuefeng Ding,
  • Yue Ni,
  • Dapeng Chen and
  • Haiyang Mao
  • + 3 authors+ 0 author

11 October 2022

The response time is an important parameter for thermopiles sensors, which reflects the response speed of the device. The accurate measurement of response time is extremely important to evaluate device characteristics for using them in suitable scena...

(This article belongs to the Special Issue Advances in MEMS Theory and Applications, 2nd Edition)
  • Article
  • Open Access
19 Citations
5,248 Views
14 Pages

Isothermal Recombinase Polymerase Amplification (RPA) of E. coli gDNA in Commercially Fabricated PCB-Based Microfluidic Platforms

  • Maria Georgoutsou-Spyridonos,
  • Myrto Filippidou,
  • Georgia D. Kaprou,
  • Dimitrios C. Mastellos and ,
  • Stavros Chatzandroulis and
  • Angeliki Tserepi
  • + 1 author+ 0 author

12 November 2021

Printed circuit board (PCB) technology has been recently proposed as a convenient platform for seamlessly integrating electronics and microfluidics in the same substrate, thus facilitating the introduction of integrated and low-cost microfluidic devi...

(This article belongs to the Special Issue Lab-on-PCB Devices)
  • Feature Paper
  • Article
  • Open Access
11 Citations
5,175 Views
11 Pages

Printed and Flexible Microheaters Based on Carbon Nanotubes

  • Aniello Falco,
  • Francisco J. Romero,
  • Florin C. Loghin,
  • Alina Lyuleeva and ,
  • Markus Becherer,
  • Paolo Lugli,
  • Diego P. Morales,
  • Noel Rodriguez,
  • Jose F. Salmerón and
  • Almudena Rivadeneyra
  • + 5 authors+ 0 author

19 September 2020

This work demonstrates a cost-effective manufacturing method of flexible and fully printed microheaters, using carbon nanotubes (CNTs) as the heating element. Two different structures with different number of CNT layers have been characterized in det...

(This article belongs to the Special Issue Functional Nanomaterials for Sensor Applications)
  • Article
  • Open Access
25 Citations
6,868 Views
14 Pages

Improved Sensing Capability of Integrated Semiconducting Metal Oxide Gas Sensor Devices

  • Ayoub Lahlalia,
  • Olivier Le Neel,
  • Ravi Shankar,
  • Siegfried Selberherr and
  • Lado Filipovic

17 January 2019

Semiconducting metal oxide (SMO) gas sensors were designed, fabricated, and characterized in terms of their sensing capability and the thermo-mechanical behavior of the micro-hotplate. The sensors demonstrate high sensitivity at low concentrations of...

(This article belongs to the Special Issue Eurosensors 2018 Selected Papers)
  • Article
  • Open Access
11 Citations
4,104 Views
15 Pages

12 April 2022

Micro-hotplates (MHPs) have become widely used basic structures in many micro sensors and actuators. Based on the analysis of the general heat transfer model, we propose a new MHP design based on a transversal composite dielectric layer, consisting o...

(This article belongs to the Section E: Engineering and Technology)
  • Article
  • Open Access
1 Citations
4,414 Views
16 Pages

2 September 2021

In this paper, the development of a copper–chrome-based glass microheater and its integration into a Polymethylmethacrylate (PMMA) microfluidic system are presented. The process highlights the importance of an appropriate characterization, taking adv...

(This article belongs to the Section A: Physics)
  • Article
  • Open Access
8 Citations
7,111 Views
14 Pages

Ligand-Based Stability Changes in Duplex DNA Measured with a Microscale Electrochemical Platform

  • Sarah M. Robinson,
  • Zuliang Shen,
  • Jon R. Askim,
  • Christopher B. Montgomery and ,
  • Herman O. Sintim and
  • Steve Semancik
  • + 1 author+ 0 author

12 April 2019

Development of technologies for rapid screening of DNA secondary structure thermal stability and the effects on stability for binding of small molecule drugs is important to the drug discovery process. In this report, we describe the capabilities of...

  • Article
  • Open Access
24 Citations
7,214 Views
12 Pages

6 December 2021

Based on the results of computational fluid dynamics simulations, this study designed and fabricated a flexible thermal-type micro flow sensor comprising one microheater and two thermistors using a micro-electromechanical system (MEMS) process on a f...

(This article belongs to the Section Biomedical Sensors)
  • Data Descriptor
  • Open Access
5 Citations
3,411 Views
12 Pages

Dataset of the Optimization of a Low Power Chemoresistive Gas Sensor: Predictive Thermal Modelling and Mechanical Failure Analysis

  • Andrea Gaiardo,
  • David Novel,
  • Elia Scattolo,
  • Alessio Bucciarelli and ,
  • Pierluigi Bellutti and
  • Giancarlo Pepponi
  • + 1 author+ 0 author

9 March 2021

Over the last few years, employment of the standard silicon microfabrication techniques for the gas sensor technology has allowed for the development of ever-small, low-cost, and low-power consumption devices. Specifically, the development of silicon...

  • Feature Paper
  • Article
  • Open Access
31 Citations
7,409 Views
37 Pages

28 July 2019

There is a growing demand in the semiconductor industry to integrate many functionalities on a single portable device. The integration of sensor fabrication with the mature CMOS technology has made this level of integration a reality. However, sensor...

(This article belongs to the Special Issue Metal Oxide Nanostructure for Solid-State Electronics and Sensors)
  • Article
  • Open Access
3 Citations
6,419 Views
8 Pages

Thermo-Optic Switch with High Tuning Efficiency Based on Nanobeam Cavity and Hydrogen-Doped Indium Oxide Microheater

  • Weiyu Tong,
  • Shangjing Li,
  • Jiahui Zhang,
  • Jianji Dong and ,
  • Bin Hu and
  • Xinliang Zhang
  • + 1 author+ 0 author

We propose and experimentally demonstrate an efficient on-chip thermo-optic (TO) switch based on a photonic crystal nanobeam cavity (PCNC) and a hydrogen-doped indium oxide (IHO) microheater. The small mode volume of the PCNC and the close-range heat...

(This article belongs to the Special Issue New Perspectives in Microwave Photonics)
  • Article
  • Open Access
17 Citations
4,183 Views
24 Pages

Thermal Performance and Energy Saving Analysis of Indoor Air–Water Heat Exchanger Based on Micro Heat Pipe Array for Data Center

  • Heran Jing,
  • Zhenhua Quan,
  • Yaohua Zhao,
  • Lincheng Wang and ,
  • Ruyang Ren and
  • Zichu Liu
  • + 1 author+ 0 author

13 January 2020

According to the temperature regulations and high energy consumption of air conditioning (AC) system in data centers (DCs), natural cold energy becomes the focus of energy saving in data center in winter and transition season. A new type of air–water...

  • Feature Paper
  • Article
  • Open Access
16 Citations
5,370 Views
14 Pages

Selective Mid-IR Metamaterial-Based Gas Sensor System: Proof of Concept and Performances Tests

  • Laura Mihai,
  • Razvan Mihalcea,
  • Roxana Tomescu,
  • Costel Paun and
  • Dana Cristea

18 March 2022

In this paper, we propose a highly selective and efficient gas detection system based on a narrow-band IR metasurface emitter integrated with a resistive heater. In order to develop the sensor for the detection of specific gases, both the microheater...

(This article belongs to the Special Issue Nanomaterials for Photonics: Advances and Applications)
  • Abstract
  • Open Access
2 Citations
1,699 Views
3 Pages

This paper reports, for the first time, on the use of thin-film platinum microheaters to influence the flow boiling of DI water in microchannels with rapid low power heating pulses. A custom-designed control module allows microheaters to be actuated...

(This article belongs to the Proceedings of XXXV EUROSENSORS Conference)

of 5