The composite material lignocellulose makes up the majority of biomass on earth and is characterized by a high biological and chemical resistance, which is essentially caused by the phenylpropanoid polymer lignin. Thus, the removal and depolymerizati...
Driven by the excessive consumption of fossil resources and environmental pollution concerns, a large amount of biorefinery research efforts have been made for converting lignocellulosic biomass into fuels and chemicals. Recently, a strategy termed &...
In this study, lignin with fine structures and facile enzymatic saccharifying residue were successively dissociated based on the lignin-first biomass deconstruction strategy. In the lignin-first process, aldehyde-protected lignin fractions were first...
Utilization of lignin is among the most pressing problems for biorefineries that convert lignocellulosic biomass to fuels and chemicals. Recently “lignin-first” biomass fractionation has received increasing attention. In most biorefining...
Currently, valorization of lignocellulosic biomass almost exclusively focuses on the production of pulp, paper, and bioethanol from its holocellulose constituent, while the remaining lignin part that comprises the highest carbon content, is burned an...
Reductive catalytic fractionation (RCF) has emerged as a representative lignin-first biorefining strategy for converting native lignin into aromatic monomers while preserving a carbohydrate-rich pulp for subsequent valorization. Although previous rev...
We optimized the solvolysis step in methanol for two-step lignin-first upgrading of woody biomass. Birchwood was first converted via sulfuric acid methanolysis to cellulose pulp and a lignin oil intermediate, which comprises a mixture of lignin oligo...
Oxidative catalytic fractionation (OCF) under the lignin-first strategy has emerged as a critical technological approach for biomass refining. To address the inevitable carbohydrate degradation and lignin condensation in conventional OCF, this study...
Reductive catalytic fractionation (RCF) has emerged as an effective lignin-first biorefinery strategy to depolymerize lignin into tractable fragments in high yields. Herein, we propose the RCF of spruce wood over a Ru/C bifunctional catalyst in the m...
At present, the majority of available road and jet biofuels are produced from oleochemical feedstocks that include vegetable oils and biowastes such as waste cooking oils and animal fats. Additionally, one of the most promising ways to achieve long-t...
The urgent need for bio-based functional materials has driven a shift away from fossil-fuel-sourced materials toward renewable lignocellulosic biomass (LCB). This comprehensive review explores the advancements in LCB carbonization between 2020 and 20...
Lignin is a type of natural aromatic material with potential application prospects obtained from lignocellulosic biomass. Recently, the valorization of lignin has received increasing attention from both industry and academia. However, there is still...
Lignin serves as a significant contributor to the natural stock of non-fossilized carbon, second only to cellulose in the biosphere. In this review article, we focus on the self-assembly properties of lignin and their contribution to its effective ut...
For the first time, the process of birch ethanol lignin sulfation with a sulfamic acid-urea mixture in a 1,4-dioxane medium was optimized experimentally and numerically. The high yield of the sulfated ethanol lignin (more than 96%) and containing 7.1...
Lignin, the term commonly used in literature, represents a group of heterogeneous aromatic compounds of plant origin. Protolignin or lignin in the cell wall is entirely different from the commercially available technical lignin due to changes during...
Lignin directly derived from lignocellulosic biomass has been named a promising source of platform chemicals for the production of bio-based polymers. This review discusses potentially relevant routes to produce renewable aromatic aldehydes (e.g., sy...
Extensive utilization of renewable biomass is crucial for the progress of carbon neutral and carbon peak implementation. Wheat straw, as an important by-product of crops, is hardly ever efficiently utilized by conventional processes. Here, we propose...
Designing anisotropic lignin-based particles and promoting the high-value utilization of lignin have nowadays drawn much attention from scientists. However, systematic studies addressing the self-assembly mechanisms of anisotropic lignin-based partic...
While carbon fibers (CFs) are still the most attractive reinforcement material for lightweight structures, they are mostly manufactured using crude oil-based process chains. To achieve a higher eco-efficiency, the partial substitution of polyacryloni...
An environmentally friendly, biobased film was prepared from cellulose and lignin extracted from oil palm dried long fiber (DLF). DLF crude cellulose was first extracted from this lignocellulosic biomass by an alkaline pretreatment process at an elev...
Lignin represents one of the most abundant plant-derived polymers. It is mostly present in the cell wall, and its primary role is to provide mechanical support to the plant. Chemical processes during wood-pulping yield diverse technical lignins with...
Current lignin fractionation methods use harsh conditions that alter the native lignin structure, resulting in a recalcitrant material which is undesired for downstream processing. Milder fractionation processes allow for the isolation of lignins tha...
Global warming has recently intensified research interest in renewable polymer chemistry, with significant attention directed towards lignin nanoparticle (LNP) synthesis. Despite progress, LNP industrial application faces challenges: (1) reliance on...
Soda lignin is a by-product of the soda process for producing cellulose from grassy raw materials. Since a method for the industrial processing of lignin of this type is still lacking, several research teams have been working on solving this problem....
The use of rhenium-based catalysts (Re2C, Re3B, ReB2, and ReS2) obtained by mechanosynthesis in the pyrolysis of cellulose and lignin from 500 to 800 °C using 10 and 20 wt.% of catalysts is reported. The mechanosynthesis of ReS2 has been reported...
Lignin, a by-product of pulping and biorefinery, has great potential to replace petrochemical resources for wastewater purification. However, the defects of lignin, such as severe heterogeneity, inferior reactivity and poor solubility, characterize t...
The conversion of lignocellulose into valuable chemicals has been recognized as the key technology in green chemistry. However, selective degradation of hemicellulose and cellulose with the production of lignin is still a challenge. Therefore, a two-...
To effectively valorize lignin, some challenges must be addressed. First, emerging techniques based on green methods may experience difficulties during the scale-up process. Secondly, the low solubility of lignin can hinder further valorization. This...
This study demonstrates the effects of structural variations of lignins isolated via an organosolv process from different woody and herbaceous feedstocks on their thermal stability profiles. The organosolv lignins were first analysed for impurities,...
Polymer foams are promising for sound absorption applications. In order to process an industrial product, a series of polystyrene (PS) composite foams were prepared by continuous extrusion foaming assisted by supercritical CO2. Because the cell size...
In this study, the structural changes of alkali lignin induced by ozonation were investigated, and the effect of ozone-treated alkali lignin and its mechanism on Avicel enzymatic hydrolysis was examined. The physicochemical properties of alkali ligni...
In this study, a lignin-based polyacid catalyst was synthesized via two steps to enhance water resistance of urea–formaldehyde (UF) resins. The first steps involved a hydroxymethylation reaction to increase the hydroxyl content in lignin. Then,...
This article explores the important, and yet often overlooked, solid-state structures of selected bioaromatic compounds commonly found in lignin hydrogenolysis oil, a renewable bio-oil that holds great promise to substitute fossil-based aromatic mole...
The objective of this study was to verify the effect of kraft lignin as a microbial carrier on biogas/methane yield. An anaerobic co-digestion test process was carried out, in which confectionery waste was used with sewage sludge. At the first stage...
During the conventional biomass fractionation, the degradation and dissolution of lignin and hemicellulose result in a complex extract which remains very challenging for the thorough separation and purification of a wide variety of fractionated produ...
The concept of bioeconomy supports the diversification strategies of forest-based industries to create new value chains and contribute to economic growth and sustainability. The use of side streams or by-products of the pulp and paper industry (PPI)...
Sustainable polymer stabilization requires renewable antioxidants that combine efficient radical scavenging with clear structure–performance relationships. Diphenylamine antioxidants are widely used in rubber protection, but their conventional...
To explore the application of industrial lignin, a waste biomass resource, in the field of metallurgy, the kinetic behavior of iron ore powder reduction by Shenmu bituminous coal, Lu’an anthracite, and industrial lignin under different carbon&n...
To utilize its rich aromatics, lignin, a high-volume waste and environmental hazard, was depolymerized in supercritical ethanol over various zeolites types with different acidity and pore structures. Targeting at high yield/selectivity of aromatics s...
Hydro-depolymerization is a novel method for converting agricultural waste into eco-friendly and promising products. Due to the complex structure and composition of corn cob (CC), a three-step process was developed, which involved pre-hydro-depolymer...
Spent coffee grounds (SCG) are one of the lignocellulosic biomasses that have gained much attention due to their high potential both in valorization and biomethane production. Previous studies have reported single processes that extract either fatty...
Class III peroxidases (EC 1.11.1.7) have use a wide range of substrates and perform numerous functions, including synthesis of monolignols, lignin precursors. The activity and tissue localization of cationic guaiacol (GPOX) and anionic benzidine pero...
This study reports on the two-step manufacturing process of a filtration media obtained by first electrospinning a layer of polycaprolactone (PCL) non-woven fibers onto a paper filter backing and subsequently coating it by electrospraying with a seco...
In the present work, rice husks (RHs), which, worldwide, represent one of the most abundant agricultural wastes in terms of their quantity, have been treated and fractionated in order to allow for their complete valorization. RHs coming from the raw...
Anionic polyamide 6 (aPA6) thermoplastic composites are known for their excellent mechanical and functional properties, including high strength, toughness, good processability, and gas-barrier capabilities. However, when exposed to the environment, t...
18 September 2024
Lignocellulosic biomass is contemplated to be an inexpensive and copious feedstock that can be used for numerous industrial applications. However, lignin forms the lignin sheath and provides a physical barrier to enzymatic hydrolysis. In addition, li...
European aspen (Populus tremula (L.) (Salicaceae)) bark is a promising raw material in multi-step biorefinery schemes due to its wide availability and higher content of secondary metabolites in comparison to stem wood biomass. The main objective of t...
Wood delignification can provide a wood-based template with sufficient pore volume for polymer/wood composites. At the same time, delignification is conducive to the penetration of polymer into the wood cell wall, which is of great significance to im...
Biopolymer-based spherical particles exhibit unique properties including narrow sizes and many functional groups on their surfaces. Therefore, they show great potential for application in many scientific and industrial processes. The main aim of this...
The surface of fresh-cut carrots is apt to white blush, however the physiological and molecular mechanism for this process is not yet fully understood. In this study, exogenous abscisic acid (ABA) and ethylene separately promoted and inhibited the wh...
of 5