- Article
Problems with minced pork include water release and low gel strength. This study aimed to investigate the effect of treatments with κ-carrageenan (κ-CAR), egg white powder (EWP), wheat gluten (WG), soy isolate protein (SPI), and a combina...
Problems with minced pork include water release and low gel strength. This study aimed to investigate the effect of treatments with κ-carrageenan (κ-CAR), egg white powder (EWP), wheat gluten (WG), soy isolate protein (SPI), and a combina...
The use of advanced sensing devices for concrete and reinforced concrete structures (RCS) is considered a rational approach for the assessment of repair options and scheduling of inspection and maintenance strategies. The immediate benefits are cost...
This study systematically investigates the impact of corn starch molecular structures on the quality attributes of surimi gel products. Employing molecular analyses to characterize corn starch, three amylopectin fractions (A, B1, and B2), categorized...
In the present study, the morphology, refined structure, thermal properties, and dynamic rheological, texture, and digestive properties of common vetch starch, a potential new type of legume starch, were systematically investigated, and compared with...
This study aimed to evaluate the effect of different concentrations of Tween 20 on various physical properties of agar gel as a model material. The effects of other sources of agar-agar powder on the gel properties were also evaluated. The pure gels...
Native soy protein isolate (N-SPI) has a low denaturation point and low solubility, limiting its industrial application. The influence of different industrial modification methods (heat (H), alkaline (A), glycosylation (G), and oxidation (O)) on the...
The Bombyx mori silk fibroin gels were prepared by adding various types of polyalcohol (Ethylene glycol, Polyethylene glycol 600) into the regenerated silk fibroin aqueous solution. The gelation time was recorded respectively. Gel structure was analy...
Soymilk gel quality hinges on soybean protein composition and structure, yet direct comparisons linking protein traits to gel properties are limited. This study compared seven Northeast Chinese soybean varieties to identify which protein characterist...
Soybean protein isolate (SPI), as a full-valued protein, is rich in nutrients, such as amino acids. However, the isolated structure of soybeans makes it difficult to react and thus prepare good gels. In order to further improve the properties of SPIs...
The sol-gel method is a simple and facile wet chemical process for fabricating advanced materials with high homogeneity, high purity, and excellent chemical reactivity at a relatively low temperature. By adjusting the processing parameters, the sol-g...
This study focuses on understanding the effect of ionic strength on the mechanical and microstructural properties of novel composite gels containing 13% whey protein isolate (WPI) and 4% de-structured waxy potato starch (DWPS). The DWPS is a physical...
This paper investigates the relationship between the molecular structure and thermally induced gel properties of duck myofibrillar protein isolate (DMPI) as influenced by the addition of pea protein isolate (PPI). The results showed that b* value of...
There are various types of gel materials used in a wide range of fields, and their gelation mechanisms are extremely diverse. Furthermore, in the case of hydrogels, there exist some difficulties in understanding complicated molecular mechanisms espec...
This study aimed to develop a novel method for preparing agar-based emulsified fluid gels as a thickened enteral feeding formula using different oil-structuring approaches: no emulsifier, the emulsifier polyglycerol polyricinoleate (PGPR), or monogly...
Responsive dual-structured emulsions and gel emulsions have attracted more and more attention due to their complex microstructures, on-demand responsive properties, and controlled release of active cargoes. In this work, the effect of monoglyceride (...
High-moisture extrusion of plant proteins to create meat-like structures is a process that has met with increasing attention in the recent past. In the process, the proteins are thermomechanically stressed in the screw section of the extruder, and th...
In this article, we report the crystallization of struvite in sodium metasilicate gel by single diffusion gel growth technique. The obtained crystals have a very rich morphology displaying 18 faces. In this study, the habit and morphology of the obta...
Considerable attention has been paid to emulsion gels (EGs) in recent years due to their interesting applications in food. The aim of this work is to shed light on the role played by chia oil in the technological and structural properties of EGs made...
The interaction of polysaccharides–protein with varied origins and structures provides opportunities for tailoring the physicochemical qualities of food protein-based materials. This work examined the feasibility of ultrasound-modified interact...
Antarctic krill surimi is a novel type of gel-based food that has attracted increasing attention. However, pure Antarctic krill surimi generally exhibits poor gel-forming properties. Konjac glucomannan (KGM) offers a promising approach to address thi...
Pectin is widely used in the food and pharmaceutical industries. However, data on sweet potato pectin extraction and structural property analyses are lacking. Here, for the high-value utilization of agricultural processing waste, sweet potato residue...
Soybean protein isolate (SPI) gel has been demonstrated to exhibit suboptimal stability and a coarse texture. Selective enzymatic hydrolysis modification has been demonstrated to effectively enhance the functional properties and structural stability...
We present the results of the theoretical modeling of the elastic shear properties of a magnetic gel, consisting of soft matrix and embedded, fine magnetizable particles, which are united in linear chain-like structures. We suppose that the composite...
Global resources have to be used in responsible ways to ensure the world’s future need for advanced materials. Ecologically friendly functional materials based on biopolymers can be successfully obtained from renewable resources, and the most p...
Peanut protein (PP) is an abundant plant protein resource with limited gelation performance. In this study, the effects of co-precipitation with egg white protein (EWP) on the structural and gelation properties of PP were investigated. Structural ana...
This study explores the impact of pore volume distribution on the structural, thermal, and mechanical properties of spinodal phase-separated silica gels synthesized with poly(ethylene oxide) as a phase-separating agent. By systematically varying gela...
In the actual production process of soy protein isolate (SPI), most of the homogeneous operating pressure is controlled below 20 MPa due to the consideration of production safety and the limitation of the pressure control capability of homogeneous eq...
The potential of sol–gel-based optical sensors is investigated for applications in the aerospace domain. To this aim, a low-cost and non-intrusive sol–gel sensor based on waveguides, arranged as a 2D matrix structure, is fabricated by UV photolithogr...
This study revealed the underlying mechanisms involved in the puffing process of dried cassava starch gel by exploring the development of the puffed structure of gel upon sand-frying, chiefly focused on the changes in the multi-scale structure and th...
Amyloid fibril hydrogels prepared via protein acid heating currently exhibit inadequate gel properties and biological activity. These limitations can be addressed by modifying the amyloid fibrils with polyphenols. In this study, two types of polyphen...
Biocompatible, nontoxic, and biodegradable polysaccharides are considered as a promising base for bio-inspired materials, applicable as scaffolds in regenerative medicine, coatings in drug delivery systems, etc. The tunable macroscopic properties of...
Here, we introduce novel pregelatinized starch-modified silica gels for Portland cement enhancement. The modified SiO2 gels demonstrate superior mechanical properties compared to pure silica, with optimal starch modification increasing the modulus by...
Metal cations are often used to regulate montmorillonite, but the mechanism is still unclear. In this paper, the regulation of different cations in montmorillonite was studied, and it was found that the regulation of different cations had significant...
To enhance the stability of biomass gel foam used for inhibiting coal spontaneous combustion (CSC), a novel highly stable biomass gel foam (SA-Ca2+@TA-GF) based on a double cross-linked structure was prepared by introducing tannic acid (TA) into a ge...
In order to improve the gel quality of silver carp (Hypophthalmichthys molitrix) surimi, the texture and rheological properties and microstructure of silver carp surimi gel products were analyzed by adding Laminaria japonica (LJ), Undaria pinnatifida...
The sol–gel coprecipitation method is highly efficient for synthesising a wide range of binary perovskite solid solutions (SSs), which have been under exhaustive study due to their semiconductor and catalytic properties. Therefore, we conducted...
In this paper, we investigated fractal cluster structures of colloidal particles in tin dioxide films obtained from lyophilic film-forming systems SnCl4/EtOH/NH4OH with different pH levels. It was revealed that at the ratio Sn > Cl2 > O2, N2 =...
High-density oil-based drilling fluids (OBDFs) are widely used in drilling operations, but during their application, the viscosity of the fluid typically increases due to the enhancement of the solid-phase gel network structure. This can lead to issu...
Bacterial infections can delay wound healing and represent serious medical problems both in the hospital and community settings, especially skin wound infections caused by Staphylococcus aureus. In this work, a gelatin hydrogel modified with photo-cr...
Silicone gel for high-voltage power module packaging is prone to interfacial failure due to poor intrinsic adhesion, which seriously threatens the reliability of devices. This study explores ways to improve the adhesion performance of silicone gel fr...
Enzymatically active nanocomposites are a perspective class of bioactive materials that finds their application in numerous fields of science and technology ranging from biosensors and therapeutic agents to industrial catalysts. Key properties of suc...
Aluminum oxide is one of the most commonly used materials in the industry. It is used in the field of catalysis, refractories, and optics. Despite the fact that there are many techniques available, there is still a great challenge in obtaining a mate...
The IDEAL IMPLANT® Structured Breast Implant is a dual lumen saline-filled implant with capsular contracture and deflation/rupture rates much lower than single-lumen silicone gel-filled implants. To better understand the implant’s mechanica...
Hemp seed protein hydrolysate (HSPH), despite its high digestibility and solubility, exhibits severely impaired gelation properties due to extensive hydrolysis, thereby limiting its food applications. This study analyzed the effect of homogeneously i...
Polyphenolic compounds can protect against myofibrillar protein (MP) oxidation in meat products. In this study, the inhibitory effect of feruloyl oligosaccharides (FOs) on MP oxidation was investigated, and the gel properties of MPs were further stud...
In this study, BiBaO3 perovskite was successfully synthesized via the sol–gel method and thoroughly characterized to evaluate its structural, microstructural, dielectric, electrical, and magnetic properties. X-ray diffraction (XRD) confirmed th...
Food gels are multiscale materials; their behavior depends not only on composition but also on how their networks are organized from the molecular to the macroscopic scale. This review treats structural scale as a physicochemical design parameter tha...
The current study reports on the impact of a series of functional alkoxysilanes on the wettability and structure of a well-established silicon/zirconium hybrid anticorrosion sol–gel coating. The selected functional alkoxysilanes comprise tetra...
NiO films were successfully deposited by sol–gel spin coating on Si, glass, and ITO-covered glass substrates. The impact of the film thickness (the different number of layers), annealing temperatures (from 300 to 500 °C), and the substrate...
In this study, cobalt oxide (Co3O4) ceramics were synthesized using the sol–gel method and calcined at 300 °C and 600 °C to investigate the influence of thermal treatment on their structural, thermal and optical properties. X-ray diffra...
of 132