Skip to Content

64 Results Found

  • Article
  • Open Access
11 Citations
5,893 Views
12 Pages

One of the biggest requirements of today’s engine development process for passenger cars is the need to reduce fuel consumption. A very effective and economic approach is the use of low-viscosity lubricants. In this work, sub-assembly resolved...

(This article belongs to the Special Issue Automotive Tribology)
  • Article
  • Open Access
  • Best Paper Award
41 Citations
14,000 Views
35 Pages

This work presents the application of a combined approach to investigate the friction losses in a modern four-cylinder passenger-car diesel engine. The approach connects the results from engine friction measurements using the indication method and th...

(This article belongs to the Special Issue Automotive Tribology)
  • Article
  • Open Access
4 Citations
2,219 Views
17 Pages

28 December 2024

A non-proportional reduction in strength parameters is widely used in slope stability assessment, but the current asynchronous reduction in strength parameters only considers the cohesion c and internal friction angle φ, which is suitable for slo...

  • Article
  • Open Access
28 Citations
7,402 Views
20 Pages

The Effects of Ultra-Low Viscosity Engine Oil on Mechanical Efficiency and Fuel Economy

  • Yanyan Zhang,
  • Ziyuan Ma,
  • Yan Feng,
  • Ziyu Diao and
  • Zhentao Liu

20 April 2021

The development of a sustainable powertrain requires improved thermal efficiency. Reducing frictional power losses through the use of ultra-low viscosity oil is one of the most effective and economical ways. To assess the potential for efficiency enh...

  • Review
  • Open Access
5 Citations
5,442 Views
37 Pages

Lubrication and Drag Reduction for Polymer-Coated Interfaces

  • Qiang Yang,
  • Xiang Ben,
  • Jingkai Lin,
  • Yuhao Zhang and ,
  • Li Xiang,
  • Zhiyong Wei and
  • Yajing Kan
  • + 2 authors+ 0 author

Lubrication is a well-established strategy for reducing interfacial frictional energy dissipation and preventing surface wear. Various lubricants have been developed, including mineral oil materials, vegetable oil materials, polymer-based materials,...

(This article belongs to the Special Issue Superlubricity Mechanisms and Applications)
  • Article
  • Open Access
12 Citations
1,818 Views
20 Pages

24 July 2025

Efficient lubrication lowers friction, wear, and energy losses in automotive drivetrain components. Advanced lubricants are key to sustainable transportation performance, durability, and efficiency. This study analyzes the tribological performance of...

(This article belongs to the Special Issue Sustainable Mobility and Transportation (SMTS 2025))
  • Article
  • Open Access
24 Citations
9,165 Views
17 Pages

Drag Reduction by Riblets on a Commercial UAV

  • Lorenzo Cacciatori,
  • Carlo Brignoli,
  • Benedetto Mele,
  • Federica Gattere and ,
  • Celeste Monti and
  • Maurizio Quadrio
  • + 1 author+ 0 author

18 May 2022

Riblets are micro-grooves capable of decreasing skin-friction drag, but recent work suggests that additional benefits are possible for other components of aerodynamic drag. The effect of riblets on a fixed-wing, low-speed Unmanned Aerial Vehicle (UAV...

(This article belongs to the Special Issue Flow Control, Active and Passive Applications)
  • Article
  • Open Access
4 Citations
2,671 Views
18 Pages

Analytical and Computational Methods for Optimizing Gabion-Pile Coastal Structures

  • Vinsensia Ferren,
  • Ikha Magdalena,
  • Cherdvong Saengsupavanich,
  • Muhammad Nabil Farras Dhiya and ,
  • Sarinya Sanitwong-Na-Ayutthaya,
  • Srinivasan Chandrasekaran,
  • Imam Solekhudin,
  • Mohammad Ivan Azis and
  • Widowati
  • + 4 authors+ 0 author

14 February 2025

Wooden or bamboo fences, commonly used for coastal protection, have limited effectiveness in reducing wave height due to their porous structure, which provides only moderate wave damping. To address this issue, our study proposes a modification that...

  • Article
  • Open Access
4 Citations
1,506 Views
20 Pages

Experimental Study on the Effect of Hydroxyethyl Cellulose on the Friction-Reducing Performance of Thixotropic Slurries in Pipe Jacking Construction

  • Xiao Yu,
  • Yajun Cao,
  • Fubing Tian,
  • Chaowei Chen and ,
  • Chao Chen,
  • Wei Wang and
  • Yaru Jiang
  • + 2 authors+ 0 author

3 July 2025

In pipe jacking construction, thixotropic slurry critically governs lubrication, friction reduction, and ground support. This study evaluated slurry performance through six parameters: specific gravity (SG), pH, fluid loss (FL), water separation rate...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
13 Citations
3,451 Views
16 Pages

20 September 2023

Diaphragm plates, a key part of high-pressure hydrogen gas compressors, are easily cracked or broken due to repeated shape deformations caused by pressure, resulting in increasing difficulties in maintenance. This study aimed to improve the durabilit...

(This article belongs to the Special Issue Functional Lubricating Materials)
  • Article
  • Open Access
62 Citations
6,553 Views
20 Pages

In this study, tribological properties of custom formulated and stabilized nano lubricant are investigated. Spherical CuO nanoparticles are suspended in 20W-50 mineral base lubricant using Oleic Acid (OA) as a surfactant. Three different nano lubrica...

  • Article
  • Open Access
37 Citations
8,028 Views
27 Pages

On-Board Road Friction Estimation Technique for Autonomous Driving Vehicle-Following Maneuvers

  • Stefania Santini,
  • Nicola Albarella,
  • Vincenzo Maria Arricale,
  • Renato Brancati and
  • Aleksandr Sakhnevych

3 March 2021

In recent years, autonomous vehicles and advanced driver assistance systems have drawn a great deal of attention from both research and industry, because of their demonstrated benefit in reducing the rate of accidents or, at least, their severity. Th...

(This article belongs to the Special Issue Performance and Safety Enhancement Strategies in Vehicle Dynamics and Ground Contact)
  • Article
  • Open Access
13 Citations
5,029 Views
18 Pages

Tribological Performance of 100Cr6/8620 Steel Bearing System under Green Oil Lubrication

  • Ricardo Ortega-Álvarez,
  • María T. Hernández-Sierra,
  • Luis D. Aguilera-Camacho,
  • Micael G. Bravo-Sánchez and ,
  • Karla J. Moreno and
  • J. Santos García-Miranda
  • + 1 author+ 0 author

21 February 2022

There is a great need to perform all processes and services more efficiently to reduce energy consumption and material waste. Bearing systems are present in all machines and motors, playing an important role in the reduction of energy consumption. 10...

(This article belongs to the Section Metal Failure Analysis)
  • Article
  • Open Access
15 Citations
8,278 Views
19 Pages

25 November 2019

In this work, friction loss investigations and comparisons of three different four-cylinder engines for passenger car applications are presented, using a recently developed combined approach. By merging extensive experimental with reliable and predic...

(This article belongs to the Special Issue Automotive Tribology)
  • Article
  • Open Access
5 Citations
1,841 Views
25 Pages

Interface Enhancement and Tribological Properties of Cattle Manure-Derived Corn Stalk Fibers for Friction Materials: The Role of Silane Treatment Concentration

  • Siyang Wu,
  • Lixing Ren,
  • Xiaochun Qiu,
  • Qiance Qi and ,
  • Bo Li,
  • Peijie Xu,
  • Mingzhuo Guo and
  • Jiale Zhao
  • + 3 authors+ 0 author

26 December 2024

Corn stalk fibers extracted from cattle manure (CSFCM) represent a unique class of natural fibers that undergo biological pre-treatment during ruminant digestion. This study systematically investigates the optimization of CSFCM-reinforced friction ma...

(This article belongs to the Special Issue Advances in Sustainable Polymeric Materials, 3rd Edition)
  • Article
  • Open Access
883 Views
18 Pages

Investigation of Friction Enhancement Behavior on Textured U75V Steel Surface and Its Friction Vibration Characteristic

  • Jinbo Zhou,
  • Zhiqiang Wang,
  • Linfeng Min,
  • Jingyi Wang and ,
  • Yongqiang Wang,
  • Zhixiong Bai and
  • Mingxue Shen
  • + 2 authors+ 0 author

7 December 2025

The wheel–rail friction coefficient is a critical factor influencing train traction and braking performance. Low-adhesion conditions not only limit the enhancement of railway transport capacity but are also the primary cause of surface damage s...

(This article belongs to the Special Issue Surface Machining and Tribology)
  • Article
  • Open Access
2 Citations
2,331 Views
23 Pages

The direct energy deposition arc process is widely used for fabricating medium and large components with moderate geometric complexity but often results in coarse microstructures and inconsistent hardness. This study introduces a hybrid manufacturing...

  • Article
  • Open Access
4 Citations
3,160 Views
18 Pages

Microstructure and Wear Resistance of Fe3Al Coating on Grey Cast Iron Prepared via Direct Energy Deposition

  • Hossein Rajaei,
  • Sasan Amirabdollahian,
  • Cinzia Menapace,
  • Giovanni Straffelini and
  • Stefano Gialanella

5 November 2023

In this study, the potential of Fe3Al coating material as an environmentally friendly alternative to coatings containing critical elements for brake discs was investigated. A buffer layer of Cr–Mo steel (Ferro 55) that was about 500 µm th...

(This article belongs to the Special Issue Laser Surface Engineering for Tribology)
  • Article
  • Open Access
6 Citations
3,570 Views
15 Pages

Turbulent Boundary Layer Control with Multi-Scale Riblet Design

  • Md. Rafsan Zani,
  • Nir Saar Maor,
  • Dhanush Bhamitipadi Suresh and
  • Yaqing Jin

2 August 2024

Motivated by the saturation of drag reduction effectiveness at high non-dimensional riblet spacing in turbulent boundary layer flows, this study seeks to investigate the influence of a secondary blade riblet structure on flow statistics and friction...

(This article belongs to the Special Issue Computational and Experimental Fluid Dynamics for Wind Energy)
  • Article
  • Open Access
21 Citations
4,338 Views
13 Pages

Enhancement of Image Quality in LCD by Doping γ-Fe2O3 Nanoparticles and Reducing Friction Torque Difference

  • Lin Gao,
  • Yayu Dai,
  • Tong Li,
  • Zongyuan Tang and ,
  • Xueqian Zhao,
  • Zhenjie Li,
  • Xiangshen Meng,
  • Zhenghong He,
  • Jian Li and
  • Wenjiang Ye
  • + 9 authors+ 4 authors

6 November 2018

Improving image sticking in liquid crystal display (LCD) has attracted tremendous interest because of its potential to enhance the quality of the display image. Here, we proposed a method to evaluate the residual direct current (DC) voltage by varyin...

  • Article
  • Open Access
3 Citations
1,576 Views
15 Pages

1 September 2025

In this study, Ni-Co-Y2O3 composite coating was prepared by electrodeposition, and the effect of Y2O3 particle size on the microstructure and properties of the coating was investigated. The samples were analyzed by XRD, SEM, AFM, EDS, cyclic voltamme...

(This article belongs to the Special Issue Development of Low-Carbon Coatings/Materials and Intelligent Construction Protection Technology)
  • Review
  • Open Access
61 Citations
15,954 Views
27 Pages

Applications of Water-Soluble Polymers in Turbulent Drag Reduction

  • Wen Jiao Han,
  • Yu Zhen Dong and
  • Hyoung Jin Choi

4 May 2017

Water-soluble polymers with high molecular weights are known to decrease the frictional drag in turbulent flow very effectively at concentrations of tens or hundreds of ppm. This drag reduction efficiency of water-soluble polymers is well known to be...

(This article belongs to the Special Issue Water Soluble Polymers)
  • Article
  • Open Access
583 Views
22 Pages

R&D Transfer and Financing in Emerging Economies: An Exploratory Approach Toward Sustainable Tech-Entrepreneurship

  • Irery L. Melchor-Duran,
  • Yonni Angel Cuero Acosta and
  • Johana Milena Jerez Morales

30 June 2026

This study examines the direct effects of R&D transfer and the sufficiency of financing for entrepreneurs on Technological Total Entrepreneurial Activity (TechTEA), as well as the mediating role of financing. The analysis employs a variance-based...

(This article belongs to the Section Economic and Business Aspects of Sustainability)
  • Article
  • Open Access
38 Citations
5,102 Views
21 Pages

Effect of Iron Oxide Nanoparticles on the Properties of Water-Based Drilling Fluids

  • Muhammad Awais Ashfaq Alvi,
  • Mesfin Belayneh,
  • Sulalit Bandyopadhyay and
  • Mona Wetrhus Minde

19 December 2020

In recent years, several studies have indicated the impact of nanoparticles (NPs) on various properties (such as viscosity and fluid loss) of conventional drilling fluids. Our previous study with commercial iron oxide NPs indicated the potential of u...

(This article belongs to the Special Issue Advances in Drilling Fluid Technology)
  • Article
  • Open Access
9 Citations
3,912 Views
17 Pages

This study explores, through a full factorial experimental design, the effects of graphite concentration and spray flow rate on the morphology, thickness, and tribological performance of graphite coatings for potential tribological applications. Coat...

(This article belongs to the Special Issue Friction, Wear, Lubrication and Mechanics of Surfaces and Interfaces)
  • Article
  • Open Access
3 Citations
2,211 Views
21 Pages

The increasing demand for lightweight and high-performance brake rotors has led to the exploration of aluminum–metal matrix composites (Al-MMCs) as alternatives to conventional cast iron rotors. This study evaluated the tribological performance...

  • Article
  • Open Access
2,078 Views
16 Pages

3 November 2024

In Caribbean islands, the washing ashore of tons of pelagic Sargassum spp., consisting of two species Sargassum fluitans and Sargassum natans, has been regularly occurring since 2011. As green lubrication is a growing trend in the tribology industry,...

(This article belongs to the Section Materials Processes)
  • Article
  • Open Access
2 Citations
2,396 Views
17 Pages

Vortex Characterization and Parametric Study of Miniature Vortex Generators and Their Near-Field Boundary Layer Effects

  • Gilles De Baets,
  • András Szabó,
  • Péter Tamás Nagy,
  • György Paál and
  • Maarten Vanierschot

8 August 2024

Delaying the onset of laminar-turbulent transition is an attractive method in reducing skin friction drag, especially on streamlined bodies where Tollmien–Schlichting instabilities are the dominating mechanism for transition. Miniature Vortex G...

(This article belongs to the Special Issue Advances in Active and Passive Techniques for Fluid Flow Manipulation)
  • Article
  • Open Access
4 Citations
2,189 Views
23 Pages

Sand-Carrying Law and Influencing Factors in Complex Fractures of Nano-Clean Fracturing Fluid

  • Hongkai Han,
  • Zhaoqi Shi,
  • Weiqin Zuo,
  • Shengjie Wu and ,
  • Yanwei Liu,
  • Kunrong Xie,
  • Liqun Long and
  • Hani Mitri
  • + 3 authors+ 0 author

18 August 2023

Nano-clean fracturing fluids have broad application potential in coalbed methane reservoir fracturing owing to their high stability, good temperature resistance, low filtration loss, and strong frictional resistance reduction. However, the sand-carry...

(This article belongs to the Topic Reservoir Characteristics and Evolution Mechanisms of the Shale)
  • Article
  • Open Access
14 Citations
2,618 Views
15 Pages

Advanced Analytical Methods of the Analysis of Friction Stir Welding Process (FSW) of Aluminum Sheets Used in the Automotive Industry

  • Krzysztof Chyła,
  • Krzysztof Gaska,
  • Anna Gronba-Chyła,
  • Agnieszka Generowicz and ,
  • Katarzyna Grąz and
  • Józef Ciuła
  • + 1 author+ 0 author

20 July 2023

The paper provides general information on selected methods of joining aluminum sheets. The main focus is on the strength of the friction stir welding connection and the energy consumption of the process. The practical part of the study used aluminum...

  • Article
  • Open Access
5 Citations
6,341 Views
16 Pages

Manufacturing and Properties of Spherical Iron Particles from a by-Product of the Steel Industry

  • Andreas Walter,
  • Gerd Witt,
  • Sebastian Platt and
  • Stefan Kleszczynski

3 April 2023

In modern cold rolling mills in the steel industry, iron oxide powder is produced as a by-product when used pickling agents are recycled. Further processing of these iron oxide powders could enable the production of iron powder for various applicatio...

  • Article
  • Open Access
13 Citations
3,694 Views
15 Pages

MoS2 Additives in Lithium Grease for Electrified Systems

  • Mohsen Tajedini,
  • M. Humaun Kabir,
  • Rouzhina Azhdari,
  • Reza Bahrami and ,
  • Hung-Jue Sue and
  • Hong Liang
  • + 1 author+ 0 author

28 February 2025

This study investigates the effectiveness of micron- and nano-sized molybdenum disulfide (MoS2) particles as additives in lithium (Li) grease under electrified conditions. By systematically applying electric current and high temperatures as experimen...

(This article belongs to the Special Issue Tribology of Electric Vehicles)
  • Article
  • Open Access
3 Citations
2,206 Views
18 Pages

Wear Behavior Analysis and Gated Recurrent Unit Neural Network Prediction of Coefficient of Friction in Al10Cu-B4C Composites

  • Mihail Kolev,
  • Ludmil Drenchev,
  • Veselin Petkov,
  • Rositza Dimitrova and ,
  • Krasimir Kolev and
  • Boris Yanachkov
  • + 1 author+ 0 author

Aluminum-based metal matrix composites reinforced with B4C are advanced materials recognized for their exceptional combination of lightweight properties, high hardness, and superior wear resistance. These characteristics make them perfectly suited fo...

(This article belongs to the Special Issue Tribology for Lightweighting)
  • Article
  • Open Access
9 Citations
3,353 Views
23 Pages

2 December 2022

Buckling-restrained brace (BRB) is a dual-function device that improves the seismic resistance and energy-dissipation capacity of structures in earthquake engineering. To achieve the expected performance under severe ground motions, BRB is usually de...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
7 Citations
2,479 Views
17 Pages

Tribological Performance of TiN–WS2 Soft–Hard Multifunctional Composite Coatings Deposited by Magnetron Sputtering

  • Hu Qiao,
  • Shengchao Zhu,
  • Suixin Fan,
  • Jiawei Kang and ,
  • Peichao Tian,
  • Jianxin Yang and
  • Youqing Wang
  • + 2 authors+ 0 author

Titanium nitride (TiN) is a widely used industrial hard coating material, known for its excellent hardness and chemical stability. However, its relatively high coefficient of friction (COF) often leads to interfacial heat accumulation and adhesive we...

(This article belongs to the Special Issue Innovative Surface Treatment Technologies for Enhanced Coating Performance)
  • Article
  • Open Access
5 Citations
2,933 Views
18 Pages

Wear Characterization and Coefficient of Friction Prediction Using a Convolutional Neural Network Model for Chromium-Coated SnSb11Cu6 Alloy

  • Mihail Kolev,
  • Vladimir Petkov,
  • Veselin Petkov,
  • Rositza Dimitrova and ,
  • Shaban Uzun and
  • Boyko Krastev
  • + 1 author+ 0 author

Enhancing the durability and tribological performance of babbitt alloys is critical for high-stress applications in automotive, marine, and industrial machinery. The present study explores the electrodeposition of chromium coatings on SnSb11Cu6 alloy...

(This article belongs to the Special Issue New Horizons in Machine Learning Applications for Tribology)
  • Article
  • Open Access
5 Citations
1,840 Views
24 Pages

Study on Cutting Performance and Wear Resistance of Biomimetic Micro-Textured Composite Cutting Tools

  • Youzheng Cui,
  • Dongyang Wang,
  • Minli Zheng,
  • Qingwei Li and ,
  • Haijing Mu,
  • Chengxin Liu,
  • Yujia Xia,
  • Hui Jiang,
  • Fengjuan Wang and
  • Qingming Hu
  • + 5 authors+ 0 author

23 June 2025

During the dry machining of 6061 aluminum alloy, cemented carbide tools often suffer from severe wear and built-up edge (BUE) formation, which significantly shortens tool life. Inspired by the non-smooth surface structure of dung beetles, this study...

  • Article
  • Open Access
3 Citations
2,320 Views
13 Pages

Nanoscale Surface Refinement of CoCrMo Alloy for Artificial Knee Joints via Chemical Mechanical Polishing

  • Hanji Zhang,
  • Jiangliang Zhang,
  • Jinghui Lai,
  • Yilin Chen and ,
  • Mengqiang Tian,
  • Guofeng Pan,
  • Xueli Yang and
  • Yuhang Qi
  • + 3 authors+ 0 author

19 December 2023

In this study, we address the challenge of surface roughness in CoCrMo alloys, typically used in artificial knee joints, which can initiate a cascade of biological responses causing inflammation, osteolysis, joint instability, and increased susceptib...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
1 Citations
488 Views
17 Pages

This study develops a MATLAB-based (MathWorks, Natick, MA, USA; version R2024b) first-order probabilistic screening framework for the Shenhu gas hydrate production area, northern South China Sea, to separate the roles of bottom-water warming, geother...

(This article belongs to the Section Geological Oceanography)
  • Article
  • Open Access
125 Views
21 Pages

Effect of Laser Remelting on the Microstructure, Mechanical and Tribological Properties of Detonation-Sprayed NiCrFeBSiC Coatings for Mechanical Engineering Applications

  • Dastan Buitkenov,
  • Nurmakhanbet Raisov,
  • Laila Sulyubayeva,
  • Almira Zhakupova and ,
  • Daryn Baizhan and
  • Nurbol Berdimuratov
  • + 1 author+ 0 author

This study investigates the effect of laser remelting on the microstructure, phase composition, mechanical properties, tribological behavior, and corrosion resistance of self-fluxing NiCrFeBSiC coatings deposited onto AISI 321 stainless steel by deto...

  • Article
  • Open Access
675 Views
16 Pages

Osteoarthritis (OA) is a multifactorial degenerative joint disease characterized by chronic inflammation, progressive cartilage extracellular matrix (ECM) degradation, and impaired joint lubrication, creating a complex pathological microenvironment t...

(This article belongs to the Special Issue Cell Therapy and Tissue Engineering for Orthopedic Applications)
  • Article
  • Open Access
1 Citations
2,558 Views
17 Pages

Deep Eutectic Solvent Based on Choline Hydroxide for Advanced Aqueous Lubrication

  • Francisco J. Carrión-Vilches,
  • Ana Eva Jiménez,
  • Paloma Mostaza,
  • María-Dolores Bermúdez and
  • María-Dolores Avilés

28 February 2026

A novel deep eutectic solvent (DES) formulated from choline hydroxide has been investigated as an additive for advanced aqueous lubrication. Comprehensive characterization of the DES enabled the determination of its viscosity, wettability, and key sp...

  • Article
  • Open Access
145 Views
27 Pages

Corrosion Protection of C90300 Bronze by Diamond-like Carbon Coatings: Suppression of Cathodic Oxygen Reduction

  • Lázaro Aleixo dos Santos,
  • Henri Stephan Schrekker,
  • Silvia Margonei Mesquita Tamborim,
  • Vladimir Jesus Trava-Airoldi and
  • Luís Frederico Pinheiro Dick

3 November 2026

This study investigates the corrosion protection of amorphous hydrogenated diamond-like carbon (DLC) films over C90300 bronze alloy (Cu-Sn-Zn) in chloride-rich environments. To overcome poor adhesion between copper and carbon, we used an amorphous hy...

(This article belongs to the Special Issue Oxidation, Wear, Corrosion Behaviors and Activated Bonding Properties of Coatings Deposited on Metals—2nd Edition)
  • Article
  • Open Access
4 Citations
1,940 Views
17 Pages

Synergistic Epichlorohydrin-Crosslinked Carboxymethyl Xylan for Enhanced Thermal Stability and Filtration Control in Water-Based Drilling Fluids

  • Yutong Li,
  • Fan Zhang,
  • Bo Wang,
  • Jiaming Liu and ,
  • Yu Wang,
  • Zhengli Shi,
  • Leyao Du,
  • Kaiwen Wang,
  • Wangyuan Zhang and
  • Liangbin Dou
  • + 6 authors+ 1 author

20 August 2025

Polymers derived from renewable polysaccharides offer promising avenues for the development of high-temperature, environmentally friendly drilling fluids. However, their industrial application remains limited by inadequate thermal stability and poor...

(This article belongs to the Section Gel Chemistry and Physics)
  • Article
  • Open Access
1,211 Views
29 Pages

Investigation on the Improvement of Geogrid Performance Based on Topology Optimization of Aperture Shape

  • Linman Cao,
  • Yumin Chen,
  • Saeed Sarajpoor,
  • Xiaofei Yao and ,
  • Xiuwei Zhao,
  • Yanan Meng and
  • Runze Chen
  • + 2 authors+ 0 author

2 February 2026

Geogrids significantly enhance the soil matrix stability and foundation bearing capacity. Despite the development of numerous geogrid configurations, their geometric design has not yet been systematically optimized. The design of geogrid aperture geo...

  • Article
  • Open Access
44 Citations
6,736 Views
15 Pages

Sustainable Green Pavement Using Bio-Based Polyurethane Binder in Tunnel

  • Chao Leng,
  • Guoyang Lu,
  • Junling Gao,
  • Pengfei Liu and ,
  • Xiaoguang Xie and
  • Dawei Wang
  • + 1 author+ 0 author

21 June 2019

As a closed space, the functional requirements of the tunnel pavement are very different from ordinary pavements. In recent years, with the increase of requirements for tunnel pavement safety, comfort and environmental friendliness, asphalt pavement...

(This article belongs to the Special Issue Sustainable Designed Pavement Materials)
  • Article
  • Open Access
21 Citations
6,499 Views
20 Pages

26 June 2019

The Panjinbulake loess landslide is located in the western part of the Loess Plateau, in Yining County, Xinjiang, China. It is characterized by its long runout and rapid speed. Based on a field geological survey and laboratory test data, we used the...

(This article belongs to the Special Issue Rainfall Thresholds and Other Approaches for Landslide Prediction and Early Warning)
  • Article
  • Open Access
7 Citations
2,138 Views
14 Pages

In this study, nanosilica-based polymers were synthesized and optimized for water-based drilling fluid applications using response surface methodology (RSM). The synthesis process involved the polymerization of methacryloyloxyethyl trimethyl ammonium...

  • Article
  • Open Access
5 Citations
2,380 Views
17 Pages

Investigation of CuTi Alloy for Applications as Non-Sparking Material

  • Alin-Marian Cazac,
  • Romeo Gabriel Chelariu,
  • Ramona Cimpoesu,
  • Mihai Adrian Bernevig and ,
  • Marcelin Benchea,
  • Adrian Marius Jurca,
  • Ancuța Mirela Radu,
  • Gabriel Dragos Vasilescu,
  • Bogdan Garaliu-Busoi and
  • Costica Bejinariu
  • + 7 authors+ 2 authors

11 December 2024

A new non-sparking metallic material, Cu-Ti, with applications in potentially explosive environments is proposed as an alternative to CuBe, to reduce the processing and toxic effects of Be. Using high-purity Cu and Ti materials, a Cu (~3–4 wt%)...

(This article belongs to the Section Chemical and Molecular Sciences)
  • Article
  • Open Access
6 Citations
2,507 Views
21 Pages

20 September 2023

In this paper, a series of experimental and numerical studies were carried out to investigate the effect of multiple cracks on concrete fracture behavior. Seven groups of double-crack concrete three-point bending (TPB) experiments with different crac...

(This article belongs to the Special Issue Concrete in Structural Engineering: Fabrication and Mechanical Behavior ‖)

of 2