- Article
The highest-quality X-ray optics can be made of single-crystal materials such as silicon, germanium, or, even better, diamond. Unfortunately, such X-ray optics have one drawback: diffraction losses or the “glitch effect”. This effect mani...
The highest-quality X-ray optics can be made of single-crystal materials such as silicon, germanium, or, even better, diamond. Unfortunately, such X-ray optics have one drawback: diffraction losses or the “glitch effect”. This effect mani...
The DECi-hertz Interferometer Gravitational wave Observatory (DECIGO) is designed to detect gravitational waves at frequencies between 0.1 and 10 Hz. In this frequency band, one of the most important science targets is the detection of primordial gra...
The DECi-hertz Interferometer Gravitational-wave Observatory (DECIGO) is the future Japanese, outer space gravitational wave detector. We previously set the default design parameters to provide a good target sensitivity to detect the primordial gravi...
Compound refractive lenses, crafted from single-crystal materials like diamond and silicon, are increasingly favored, particularly in cutting-edge facilities, such as free electron lasers and fourth-generation synchrotrons. These lenses are prized fo...
One-monolayer (ML) (thin) and 5-ML (thick) Si films were grown on the α-phase Si(111)√3 × √3R30°-Bi at a low substrate temperature of 200 °C. Si films have been studied in situ by reflection electron energy loss spectr...
In this paper, Computer Vision (CV) sensing technology based on Convolutional Neural Network (CNN) is introduced to process topographic maps for predicting wireless signal propagation models, which are applied in the field of forestry security monito...
A wide range-infrared free electron laser (IR-FEL) is being constructed for science and industrial applications in the Accelerator Technologies Institute, Ankara University. In the facility, in order to obtain electron beam with energy 40 MeV, 4.5 ce...
X-ray optics made of single-crystal materials are widely used at most of the X-ray sources due to the outstanding properties. The main drawback of such optics—the diffraction losses, also known as glitches of intensity in the energy spectrum of the t...
Buildings and vegetation in the proximity of a terrestrial base station induce a significant additional loss, typically referred to as “clutter loss”, which sums up to free space loss and atmospheric attenuation. Clutter loss is essential...
Accurate path-loss models are essential for planning reliable wireless networks in underground mines, yet existing characterization studies rely on specialized channel sounders and vector network analyzers costing tens of thousands of dollars, placin...
This paper presents a method for calculating the insertion loss of barriers on the ground. The method combines the classic imaging method for an analysis of sound propagation with the secondary source model for diffraction by barriers in the time dom...
A single frequency of 500 Hz is used as the equivalent frequency for traffic noise to calculate the approximate diffraction in current road barrier designs. However, the noise frequency changes according to the different types of vehicles moving at v...
We synthesized manganese ferrite (MnFe2O4) nanoparticles of different sizes by varying pH during chemical co-precipitation procedure and modified their surfaces with polysaccharide chitosan (CS) to investigate characteristics of hyperthermia and magn...
Stratum corneum (SC), the outermost layer of human skin, acts as an intelligent physicochemical interface between the inside and the outside of our body. To make clear the relationship between structure and physical barrier properties of SC, we devel...
Accurate modeling of radio wave propagation in mountainous environments is essential for wireless communication systems in applications such as emergency rescue and public safety. Based on propagation measurements from VHF to microwave bands, this pa...
The “gold dust defect” (GDD) appears at the surface of ferritic stainless steels (FSS) and degrades their appearance. Previous research showed that this defect might be related to intergranular corrosion and that the addition of aluminium...
The advancement of 6G networks is driven by the need for customer-centric communication and network control, particularly in applications such as intelligent transport systems. These applications rely on outdoor communication in extremely high-freque...
The DECi-hertz Interferometer Gravitational-Wave Observatory (DECIGO) is a space gravitational wave (GW) detector. DECIGO was originally designed to be sensitive enough to observe primordial GW background (PGW). However, due to the lowered upper limi...
Proper skin barrier function is paramount for our survival, and, suffering injury, there is an acute need to restore the lost barrier and prevent development of a chronic wound. We hypothesize that rapid wound closure is more important than immediate...
Ultrasonic attenuation coefficients of ceramic and inorganic materials were determined for the longitudinal and transverse wave modes. Sample materials included hard and soft ceramics, common ceramics, ceramic-matrix composites, mortars, silicate gla...
In this paper, we propose a method to generate multi-depth phase-only holograms using stochastic gradient descent (SGD) algorithm with weighted complex loss function and masked multi-layer diffraction. The 3D scene can be represented by a combination...
Acoustic applications of metamaterials have rapidly developed over the past few decades. The sound attenuation provided by metamaterials is due to the interaction between soundwaves and scatterers organized into a reticular grid, with a peak attenuat...
One of the major challenges in designing a wireless indoor–outdoor communication network operating in tunnels and long corridors is to identify the optimal location of the outside station for attaining a proper coverage. It is required to formu...
Analytical scanning and transmission electron microscopy were used to study the microstructure of Ce,Er-doped Na0.5La0.5MoO4 laser crystals. Crystals were grown by the Czochralski method from the melts with a nominal composition of Na0.5La0.5−x...
This paper presents a comprehensive survey of state-of-the-art UAV–based antennas and propagation measurements. Unmanned aerial vehicles (UAVs) have emerged as powerful tools for in situ electromagnetic field assessments due to their flexibilit...
Corrosion processes of the most common steel grades in various environments are the subject of numerous studies. At the same time, the corrosion of welded joints hidden in concrete thickness has not yet been studied. The authors set themselves the ta...
Modern coating methods have become an important part of industrial practice. For some materials and operations, the use of abrasion-resistant and hard coatings is an absolute necessity; for others, they are the key to greater efficiency and productiv...
Silica has many industrial (i.e., glass formers) and scientific applications. The understanding and prediction of the interesting properties of such materials are dependent on the knowledge of detailed atomic structures. In this work, amorphous silic...
It has been widely speculated that the performance of the next generation based wireless network should meet a transmission speed on the order of 1000 times more than the current cellular communication systems. The frequency bands above 6 GHz have re...
By leveraging the high sensitivity of acousto-optic modulators to microwave signals, their integration into RFID systems can significantly improve the detection of faint microwave signals. Traditional acousto-optic modulators, which use bidirectional...
By leveraging amplitude differences between reflected and diffracted signals in Ground Penetrating Radar (GPR) data, multiple singular spectrum analysis (MSSA) is considered an attractive approach to separate diffraction, which has identified great p...
Imaging of scenes using light or other wave phenomena is subject to the diffraction limit. The spatial profile of a wave propagating between a scene and the imaging system is distorted by diffraction resulting in a loss of resolution that is proporti...
A partitionable adaptive multilayer diffractive optical neural network is constructed to address setup issues in multilayer diffractive optical neural network systems and the difficulty of flexibly changing the number of layers and input data size. W...
Accurate background subtraction is critical in the analysis of X-ray fiber diffraction patterns from striated muscle. Diffuse scattering and low signal-to-noise ratio complicate the separation of signal from background. Existing methods are applied h...
Structural and spatial aspects of cell degradation are studied using a combination of diffraction-and imaging-based tools applying laboratory X-rays, neutron scattering and synchrotron radiation with electrochemical and thermal characterization. Expe...
Deterministic channel models, such as the three-dimensional (3D) ray launching method, can yield wireless channel parameters. In the non-line-of-sight (NLOS) propagation, the outdoor 3D ray launching method that considers diffraction effects is more...
Ni0.5Zn0.5Fe2O4 nanofibers with an average diameter of 133.56 ± 12.73 nm were fabricated by electrospinning and calcination. According to our thermogravimetric—differential thermal analysis and X-ray diffraction results, the calcination...
Optimum grain size and effects of crystallographic textures on magnetic properties of Fe-0.65%Si non-oriented electrical steel produced by compact strip production (CSP) process were investigated by optical microscope, electron backscatter diffractio...
Diffractive optical elements (DOEs) are difficult to apply in natural scenes imaging covering the visible bandwidth-spectral due to their strong chromatic aberration and the decrease in diffraction efficiency. Advances in computational imaging make i...
We propose a new rotation invariant correlator using dimensionality reduction. A diffractive phase element is used to focus image data into a line which serves as input for a conventional correlator. The diffractive element sums information over each...
In this research, a key optical component for multi-degree-of-freedom (MDOF) surface encoder was designed, fabricated and evaluated. In a MDOF grating interferometry system, there are four diffraction beams from a two-axis scale grating and reference...
Coherent diffractive imaging is an optical methodology that encodes information about an object within the diffraction intensity. Here, we introduce a diffractive optical encryption system that utilizes multiple wavelengths and multiple distances, si...
The sustained interest in efficient, low-cost, and straightforward-to-manufacture lasers has prompted intense research into organic semiconductor laser emitter materials in recent decades. The main focus of this research is determining the optical ga...
With the implementation of the “double carbon” policy in various countries in the world, the demand for grain-oriented electrical steel with low iron loss and high magnetic induction is increasing. Reducing the thickness of the steel shee...
A 3D supramolecular network, [Cd(bipy)(C4O4)(H2O)2]·3H2O (1) (bipy = 4,4′-bipyridine and C4O42− = dianion of H2C4O4), constructed by mixed-ligand two-dimensional (2D) metal-organic frameworks (MOFs) has been reported and structurally determined by th...
An optical configuration of double-diffracted spatially separated heterodyne grating interferometer with a mechanical fixture was designed. To further investigate its features and provide robust measurements, the alignment tolerance in double-diffrac...
Diffraction of light in periodic structures is observed in a variety of systems including atoms, solid state crystals, plasmonic structures, metamaterials, and photonic crystals. In metamaterials, lattice diffraction appears across microwave to optic...
In this paper, we propose a side-absorption concentrated module with diffractive grating as a spectral-beam-splitter to divide sunlight into visible and infrared parts. The separate solar energy can be applied to different energy conversion devices o...
An excellent Fe-3.3 wt% Si steel was fabricated by double cold rolling and final annealing. The evolution of the microstructure and texture was studied by optical microscope (OM), X-ray diffraction (XRD), ex situ, and quasi-in situ electron backscatt...
The process of X-ray diffraction on the X-112° Y-cut of a LiTaO3 crystal excited by surface acoustic waves (SAW) with a wavelength of
of 30