Skip to Content

45 Results Found

  • Article
  • Open Access
29 Citations
7,744 Views
7 Pages

8 June 2012

To compensate for the temperature dependency of a standard FBG, a cladding-etched FBG immersed with a liquid mixture having a negative thermo-optic coefficient is presented, and its characteristics are investigated. The Bragg wavelength of the claddi...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
577 Views
14 Pages

28 February 2026

The control of cladding layer morphology is crucial in laser cladding technology. However, traditional process parameter-based regulation suffers from parameter coupling issues, and previous nanosecond laser pretreatment is prone to causing uneven su...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Communication
  • Open Access
67 Citations
7,918 Views
7 Pages

Optical-Based Sensors for Monitoring Corrosion of Reinforcement Rebar via an Etched Cladding Bragg Grating

  • Muhammad Rosdi Abu Hassan,
  • Muhammad Hafiz Abu Bakar,
  • Katrina Dambul and
  • Faisal Rafiq Mahamd Adikan

14 November 2012

In this paper, we present the development and testing of an optical-based sensor for monitoring the corrosion of reinforcement rebar. The testing was carried out using an 80% etched-cladding Fibre Bragg grating sensor to monitor the production of cor...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
5 Citations
1,790 Views
14 Pages

26 September 2025

A duplex coating system, consisting of a laser-cladded Fe-Cr-based interlayer and a silicon-doped diamond-like carbon (Si-DLC) top layer, was deposited on medium carbon steel substrate using laser cladding (LC) followed by plasma-enhanced chemical va...

(This article belongs to the Section Corrosion, Wear and Erosion)
  • Article
  • Open Access
12 Citations
3,987 Views
16 Pages

A Seawater Salinity Sensor Based on Optimized Long Period Fiber Grating in the Dispersion Turning Point

  • Chao Du,
  • Shuang Zhao,
  • Qiuyu Wang,
  • Bin Jia and ,
  • Mingzhe Zhao,
  • Li Zhang,
  • Liqin Cui,
  • Shizhe Chen and
  • Xiao Deng
  • + 4 authors+ 0 author

30 April 2023

Variations of seawater salinity often cause ocean internal waves, water masses and stratification, which affect the stability of the ocean environment. Therefore, the study of seawater salinity is significant for the prediction of changes in the ocea...

(This article belongs to the Special Issue Fiber Grating Sensors and Applications)
  • Communication
  • Open Access
7 Citations
2,774 Views
9 Pages

Sensitivity Analysis of Sidelobes of the Lowest Order Cladding Mode of Long Period Fiber Gratings at Turn Around Point

  • Tanoy Kumar Dey,
  • Sara Tombelli,
  • Arpan Roy,
  • Palas Biswas and ,
  • Ambra Giannetti,
  • Nandini Basumallick,
  • Francesco Baldini,
  • Somnath Bandyopadhyay and
  • Cosimo Trono
  • + 4 authors+ 0 author

12 April 2022

A new methodology to enhance the sensitivity of a long period fiber grating sensor (LPFG) at the Turn Around Point (TAP) is here presented. The LPFG sensor has been fabricated by etching the fiber up to 20.4 µm, until the sidelobes of dispersed...

(This article belongs to the Section Optical Sensors)
  • Article
  • Open Access
5 Citations
2,560 Views
15 Pages

Biosensing by Polymer-Coated Etched Long-Period Fiber Gratings Working near Mode Transition and Turn-around Point

  • Tanoy Kumar Dey,
  • Cosimo Trono,
  • Palas Biswas,
  • Ambra Giannetti and ,
  • Nandini Basumallick,
  • Francesco Baldini,
  • Somnath Bandyopadhyay and
  • Sara Tombelli
  • + 3 authors+ 0 author

13 July 2023

A methodology to enhance the sensitivity of long-period fiber gratings (LPFGs) based on the combination of three different enhancement approaches is presented; the methods here adopted are the working near mode transition (MT) of a cladding mode (CM)...

(This article belongs to the Section Optical and Photonic Biosensors)
  • Article
  • Open Access
4 Citations
3,437 Views
10 Pages

High-Extraction-Rate Ta2O5-Core/SiO2-Clad Photonic Waveguides on Silicon Fabricated by Photolithography-Assisted Chemo-Mechanical Etching (PLACE)

  • Jian Liu,
  • Youting Liang,
  • Lang Gao,
  • Chao Sun and ,
  • Jianglin Guan,
  • Zhe Wang,
  • Zhaoxiang Liu,
  • Zhiwei Fang,
  • Min Wang and
  • Ya Cheng
  • + 6 authors+ 1 author

9 September 2024

We demonstrate high-extraction-rate Ta2O5-core/SiO2-clad photonic waveguides on silicon fabricated by the photolithography-assisted chemo-mechanical etching technique. Low-confinement waveguides of larger than 70% coupling efficiency with optical fib...

(This article belongs to the Special Issue Laser-Based Nano Fabrication and Nano Lithography: Second Edition)
  • Article
  • Open Access
13 Citations
3,968 Views
14 Pages

7 June 2018

Here, we present a novel method to fabricate long period gratings using standard single mode optical fibers (SMF). These optical devices were fabricated in a three-step process, which consisted of etching the SMF, then coating it with a thin-film and...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
42 Citations
13,892 Views
20 Pages

Refractive Index Measurement of Lithium Ion Battery Electrolyte with Etched Surface Cladding Waveguide Bragg Gratings and Cell Electrode State Monitoring by Optical Strain Sensors

  • Antonio Nedjalkov,
  • Jan Meyer,
  • Alexander Gräfenstein,
  • Benjamin Schramm and ,
  • Martin Angelmahr,
  • Julian Schwenzel and
  • Wolfgang Schade
  • + 2 authors+ 0 author

In this scientific publication, a new sensor approach for status monitoring, such as state of charge and state of health, of lithium ion batteries by using special Bragg gratings inscribed into standard optical glass fibers is presented. In addition...

  • Article
  • Open Access
11 Citations
3,549 Views
10 Pages

Temperature-Insensitive Refractive Index Sensor with Etched Microstructure Fiber

  • Bin Dai,
  • Xiang Shen,
  • Xiongwei Hu,
  • Luyun Yang and ,
  • Haiqing Li,
  • Jinggang Peng and
  • Jinyan Li
  • + 2 authors+ 0 author

30 August 2019

A Mach–Zehnder interferometer (MZI) based on an etched all-solid microstructure fiber (MOF) has been demonstrated. The MZI works on the basis of interference between the vibrant core and cladding modes in the MOF. The all-solid MOF has a hetero...

(This article belongs to the Section Optical Sensors)
  • Feature Paper
  • Article
  • Open Access
13 Citations
5,601 Views
7 Pages

An Ultra-High-Q Lithium Niobate Microresonator Integrated with a Silicon Nitride Waveguide in the Vertical Configuration for Evanescent Light Coupling

  • Jianhao Zhang,
  • Rongbo Wu,
  • Min Wang,
  • Youting Liang and ,
  • Junxia Zhou,
  • Miao Wu,
  • Zhiwei Fang,
  • Wei Chu and
  • Ya Cheng
  • + 4 authors+ 0 author

25 February 2021

We demonstrate the hybrid integration of a lithium niobate microring resonator with a silicon nitride waveguide in the vertical configuration to achieve efficient light coupling. The microring resonator is fabricated on a lithium niobate on insulator...

(This article belongs to the Special Issue 3D Printing of MEMS Technology)
  • Proceeding Paper
  • Open Access
2 Citations
2,379 Views
4 Pages

Monitoring the Etching Process in LPFGs towards Development of Highly Sensitive Sensors

  • Ignacio Del Villar,
  • Jose Luis Cruz,
  • Abian Bentor Socorro,
  • Silvia Diaz and ,
  • Jesus Maria Corres,
  • Francisco Javier Arregui and
  • Ignacio Raul Matias
  • + 2 authors+ 0 author

In this work, the monitoring of the etching process up to a diameter of 30 µm of two LPFG structures has been compared, one of them had initially 125 µm, whereas the second one had 80 µm. By tracking the wavelength shift of the resonance bands during...

(This article belongs to the Proceedings of Proceedings of Eurosensors 2017, Paris, France, 3–6 September 2017)
  • Article
  • Open Access
1 Citations
1,595 Views
11 Pages

30 May 2024

Optical fiber gratings can be appropriately packaged and integrated for the real-time monitoring of the structural health of buildings or composite-material films. In this work, a tilted fiber Bragg grating at the micron scale was proposed, designed,...

(This article belongs to the Section Optics and Lasers)
  • Feature Paper
  • Article
  • Open Access
9 Citations
6,804 Views
12 Pages

12 January 2019

We report on a simple chemical etching method that enables nonlinear tapering of Polymer Optical Fiber (POF) tips to manufacture Compound Parabolic Concentrator (CPC) fiber tips. We show that, counter-intuitively, nonlinear tapering can be achieved b...

(This article belongs to the Special Issue Optical Bio Sensing)
  • Article
  • Open Access
11 Citations
6,401 Views
8 Pages

10 September 2014

An intrinsic Fabry-Perot interferometeric sensor based on a microfiber has been demonstrated. The micro-size suspended core is created by chemical etching a photonics crystal fiber, of which the cladding has a micrometer-spaced, hexagonal array of ai...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
13 Citations
3,817 Views
14 Pages

Effect of Current on Corrosion Resistance of Duplex Stainless Steel Layer Obtained by Plasma Arc Cladding

  • Juan Pu,
  • Peng Xie,
  • Weimin Long,
  • Mingfang Wu and ,
  • Yongwang Sheng and
  • Jie Sheng
  • + 1 author+ 0 author

2 March 2022

In order to repair or strengthen stainless steel structural parts, the experiment was conducted by using plasma arc cladding technology to prepare 2205 duplex stainless steel (DSS) layers on the surface of Q345 steel. Their macro morphology and micro...

(This article belongs to the Special Issue Mechanical Properties of Advanced Metallic Materials)
  • Article
  • Open Access
2 Citations
3,439 Views
7 Pages

Highly Integrated Cladding Mode Stripper Array for Compact High-Power Industrial Fiber Laser

  • Yu Liu,
  • Wenjie Wu,
  • Pengfei Zhao,
  • Shan Huang and ,
  • Yuwei Li,
  • Yue Li,
  • Min Li,
  • Rumao Tao,
  • Honghuan Lin and
  • Jianjun Wang
  • + 5 authors+ 0 author

15 December 2022

A design integrating multiple cladding mode strippers used in fiber laser architectures into a single device is proposed. This approach can increase the compactness of fiber lasers, thus contributing to industrial laser processing applications. By of...

(This article belongs to the Special Issue High-Power Lasers for Materials Processing)
  • Article
  • Open Access
1,058 Views
20 Pages

Full-Scale Laboratory Testing of Laser Clad Rail Track—Results of Sub-Surface Microstructural and Residual Stress Analysis

  • Roger Lewis,
  • Lucas Biazon Cavalcanti,
  • Kazim Yildirimli,
  • David Fletcher and ,
  • Kate Tomlinson,
  • Henrique Boschetti Pereira,
  • Helio Goldenstein and
  • Mahmoud Mostafavi
  • + 3 authors+ 0 author

Additive manufacturing through a laser cladding has been shown to be an effective technology for the mitigation of wear and rolling contact fatigue (RCF) of railway track. Small-scale tests have consistently shown that creating a thin layer of premiu...

(This article belongs to the Special Issue Rolling Contact Fatigue and Wear of Rails and Wheels)
  • Proceeding Paper
  • Open Access
3 Citations
1,551 Views
5 Pages

Realization of Enhanced Evanescent Field Long Period Fiber Grating near Turn around Point for Label-Free Immunosensing

  • Tanoy Kumar Dey,
  • Sara Tombelli,
  • Palas Biswas,
  • Ambra Giannetti and ,
  • Nandini Basumallick,
  • Francesco Baldini,
  • Somnath Bandyopadhyay and
  • Cosimo Trono
  • + 3 authors+ 0 author

2 November 2020

A long-period fiber grating (LPFG) with maximum enhancement of evanescent field has been designed and fabricated, along with theoretical modeling, by working near the turn-around point (TAP) of the lowest order symmetric cladding mode (LP0.2 cladding...

(This article belongs to the Proceedings of The 1st International Electronic Conference on Biosensors)
  • Article
  • Open Access
18 Citations
3,159 Views
16 Pages

High Sensitivity Optical Fiber Mach–Zehnder Refractive Index Sensor Based on Waist-Enlarged Bitaper

  • Na Zhao,
  • Zelin Wang,
  • Zhongkai Zhang,
  • Qijing Lin and ,
  • Kun Yao,
  • Fuzheng Zhang,
  • Yunjing Jiao,
  • Libo Zhao,
  • Bian Tian and
  • Zhuangde Jiang
  • + 6 authors+ 1 author

28 April 2022

A Mach–Zehnder fiber optic sensor with high refractive index response sensitivity was developed. By fabricating a waist-enlarged bitaper structure on the interference arm of a single mode–multimode–single mode (SMS) Mach–Zehnd...

(This article belongs to the Special Issue Advanced Manufacturing Technology and Systems)
  • Article
  • Open Access
22 Citations
4,519 Views
10 Pages

Optimization of Cladding Diameter for Refractive Index Sensing in Tilted Fiber Bragg Gratings

  • Sanzhar Korganbayev,
  • Marzhan Sypabekova,
  • Aida Amantayeva,
  • Álvaro González-Vila and ,
  • Christophe Caucheteur,
  • Paola Saccomandi and
  • Daniele Tosi
  • + 2 authors+ 0 author

15 March 2022

This work presents an experimental investigation of the effect of chemical etching on the refractive index (RI) sensitivity of tilted fiber Bragg gratings (TFBGs). Hydrofluoric acid (HF) was used stepwise in order to reduce the optical fiber diameter...

(This article belongs to the Special Issue Bragg Grating Sensors)
  • Article
  • Open Access
5 Citations
4,262 Views
12 Pages

18 February 2024

To fully utilize the advantages of Si3N4 and Silicon-On-Insulator to achieve a high-efficiency wideband grating coupler, we propose and numerically demonstrate a grating coupler based on Si3N4 and a Silicon-On-Insulator heterogeneous integration plat...

(This article belongs to the Section Optical and Photonic Materials)
  • Article
  • Open Access
23 Citations
5,277 Views
9 Pages

15 December 2017

We present a novel two-dimensional fiber-optic inclinometer with high sensitivity by crisscrossing two etched chirped fiber Bragg gratings (CFBG) arrays. Each array is composed of two symmetrically-arranged CFBGs. By etching away most of the cladding...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
19 Citations
5,595 Views
10 Pages

Birefringent Bragg Grating in C-Shaped Optical Fiber as a Temperature-Insensitive Refractometer

  • Rex Xiao Tan,
  • Daryl Ho,
  • Chun Ho Tse,
  • Yung Chuen Tan and ,
  • Seong Woo Yoo,
  • Swee Chuan Tjin and
  • Morten Ibsen
  • + 2 authors+ 0 author

29 September 2018

We demonstrate a simple-to-fabricate refractometer based on the inscription of fiber Bragg gratings in a special C-shaped optical fiber. The C-shaped fiber was drawn into shape using a quarter cladding removed preform of a commercial standard single-...

(This article belongs to the Special Issue I3S 2018 Selected Papers)
  • Article
  • Open Access
11 Citations
4,384 Views
12 Pages

7 March 2021

The modal property and light propagation in tapered silicon ridge waveguides with different ridge heights are investigated for a silicon on insulator (SOI) platform with a 500 nm silicon (Si) thickness. Mode conversion between the transverse magnetic...

(This article belongs to the Section Optics and Lasers)
  • Article
  • Open Access
39 Citations
8,794 Views
11 Pages

Single Mode Air-Clad Single Crystal Sapphire Optical Fiber

  • Cary Hill,
  • Dan Homa,
  • Zhihao Yu,
  • Yujie Cheng and ,
  • Bo Liu,
  • Anbo Wang and
  • Gary Pickrell
  • + 2 authors+ 0 author

The observation of single mode propagation in an air-clad single crystal sapphire optical fiber at wavelengths at and above 783 nm is presented for the first time. A high-temperature wet acid etching method was used to reduce the diameter of a 10 cm...

(This article belongs to the Special Issue Distributed Optical Fiber Sensors)
  • Article
  • Open Access
21 Citations
3,852 Views
18 Pages

A Bilayer SnO2/MoS2-Coated Evanescent Wave Fiber Optic Sensor for Acetone Detection—An Experimental Study

  • A. Prasanth,
  • Selamawit Getachew,
  • Tseganesh Shewa,
  • M. Velumani and ,
  • S. R. Meher and
  • Z. C. Alex
  • + 1 author+ 0 author

7 September 2022

The need for sensors that measure the acetone content of exhaled breath for diabetes severity has recently increased. Clinical researchers have reported less than 0.8 ppm acetone concentration in the exhaled breath of an average individual, while tha...

(This article belongs to the Section Biosensors and Healthcare)
  • Article
  • Open Access
1 Citations
1,280 Views
7 Pages

Tapered Cladding Design for Monolithic Waveguide–Photodetector Coupling in Si-Based Integrated Photonics

  • Alfredo A. Gonzalez-Fernandez,
  • Jorge A. Vazquez-Hernandez,
  • Felix Aguilar-Valdez and
  • Neil Moffat

17 November 2025

Silicon photonics offers a powerful route to leverage existing microelectronics infrastructure to enhance performance and enable new applications in data processing and sensing. Among the available material platforms, silicon nitride (Si3N4) provides...

(This article belongs to the Collection Nano-Optics and Nano-Optoelectronics: Challenges and Future Trends)
  • Article
  • Open Access
5 Citations
4,390 Views
7 Pages

Polymer M-Z Thermal Optical Switch at 532-nm Based on Wet Etching and UV-Writing Waveguide

  • Jiawen Lv,
  • Yue Cao,
  • Baizhu Lin,
  • Yue Yang and ,
  • Yue Sun,
  • Shuai Li,
  • Yunji Yi,
  • Fei Wang and
  • Daming Zhang
  • + 4 authors+ 0 author

4 June 2019

Polymer thermal optical switches have low power consumption and 532 nm is the communication window of polymer fiber. Polymer thermal optical switches at 532 nm are rarely reported, because of switching extinction ratio properties that are restricted...

(This article belongs to the Special Issue Holographic Materials and Photonic Applications)
  • Article
  • Open Access
62 Citations
10,800 Views
11 Pages

15 September 2017

In this study, we propose a tilted fiber Bragg grating (TFBG) humidity sensor fabricated using the phase mask method to produce a TFBG that was then etched with five different diameters of 20, 35, 50, 55 and 60 μm, after which piezoelectric inkjet te...

(This article belongs to the Special Issue Selected Papers from IEEE ICASI 2017)
  • Article
  • Open Access
32 Citations
6,588 Views
20 Pages

28 August 2018

We present the development of a label-free, highly sensitive fiber-optical biosensor for online detection and quantification of biomolecules. Here, the advantages of etched fiber Bragg gratings (eFBG) were used, since they induce a narrowband Bragg w...

(This article belongs to the Section Biosensors)
  • Article
  • Open Access
1,394 Views
13 Pages

Flexible Metasurface Deposition Using Transferable Layer

  • Yi Shen,
  • TienYang Lo,
  • Taiki Takashima,
  • Shunsuke Murai and
  • Katsuhisa Tanaka

Metasurfaces, planar structures made on a subwavelength scale, enable state-of-the-art manipulation of light and have become a promising solution for compact optical devices. However, fabrication of these nanoscale structures relies on demanding proc...

  • Article
  • Open Access
3 Citations
2,969 Views
11 Pages

A Pathway for the Integration of Novel Ferroelectric Thin Films on Non-Planar Photonic Integrated Circuits

  • Enes Lievens,
  • Kobe De Geest,
  • Ewout Picavet,
  • Liesbet Van Landschoot and ,
  • Henk Vrielinck,
  • Gilles Freddy Feutmba,
  • Hannes Rijckaert,
  • Klaartje De Buysser,
  • Dries Van Thourhout and
  • Jeroen Beeckman
  • + 6 authors+ 1 author

13 March 2025

The heterogeneous integration of ferroelectric thin films on silicon- or silicon nitride-based platforms for photonic integrated circuits plays a crucial role in the development of nanophotonic thin film modulators. For this purpose, an ultrathin see...

(This article belongs to the Special Issue Emerging Trends in Optoelectronic Device Engineering)
  • Article
  • Open Access
10 Citations
2,734 Views
13 Pages

Influence of Titanium Surface Porosity on Adhesive Strength of Coatings Containing Calcium Silicate

  • Ivan Zhevtun,
  • Pavel Gordienko,
  • Yury Kulchin,
  • Alexander Nikitin and ,
  • Dmitry Pivovarov,
  • Sofia Yarusova,
  • Andrey Golub,
  • Pavel Nikiforov and
  • Vadim Timchenko
  • + 4 authors+ 0 author

10 October 2020

Titanium-based alloys are widely used in aerospace engineering. They have good mechanical and corrosion properties but, in some cases, the material itself or the coating should meet some additional requirements. For example, it may be a requirement o...

  • Article
  • Open Access
15 Citations
5,816 Views
19 Pages

18 May 2021

Embroidery is often the preferred technology when rigid circuit boards need to be connected to sensors and electrodes by data transmission lines and integrated into textiles. Moreover, conventional circuit boards, like Lilypad Arduino, commonly lack...

  • Article
  • Open Access
5 Citations
4,934 Views
9 Pages

A Stripline-Based Planar Wideband Feed for High-Gain Antennas with Partially Reflecting Superstructure

  • Affan A Baba,
  • Raheel M Hashmi,
  • Mohsen Asadnia,
  • Ladislau Matekovits and
  • Karu P Esselle

This paper presents a new planar feeding structure for wideband resonant-cavity antennas (RCAs). The feeding structure consists of two stacked dielectric slabs with an air-gap in between. A U-shaped slot, etched in the top metal-cladding over the upp...

(This article belongs to the Special Issue Nanodevices for Microwave and Millimeter Wave Applications)
  • Article
  • Open Access
11 Citations
4,306 Views
12 Pages

Silicon Oxynitride Thin Film Coating to Lossy Mode Resonance Fiber-Optic Refractometer

  • Dmitriy P. Sudas,
  • Leonid Yu. Zakharov,
  • Viktor A. Jitov and
  • Konstantin M. Golant

11 May 2022

A fiber-optic refractometer for various liquids with refractive indices in the range from 1.33 to 1.43 has been manufactured and tested. The sensor is based on a thin silicon oxynitride (Si3N4-xOx) film coated thinned optic fiber section (taper) obta...

(This article belongs to the Special Issue State-of-the-Art Optical Sensors Technology in Russia 2021-2022)
  • Article
  • Open Access
41 Citations
7,095 Views
12 Pages

Surface-Plasmon-Resonance-Based Optical Fiber Curvature Sensor with Temperature Compensation by Means of Dual Modulation Method

  • Yudong Su,
  • Yong Wei,
  • Yonghui Zhang,
  • Chunlan Liu and ,
  • Xiangfei Nie,
  • Zongda Zhu and
  • Lu Liu
  • + 2 authors+ 0 author

9 August 2018

Curvature measurement plays an important role in many fields. Aiming to overcome shortcomings of the existing optical fiber curvature sensors, such as complicated structure and difficulty in eliminating temperature noise, we proposed and demonstrated...

(This article belongs to the Special Issue Surface Plasmon Resonance Sensing 2019)
  • Article
  • Open Access
15 Citations
4,632 Views
17 Pages

On the Fabrication and Characterization of Polymer-Based Waveguide Probes for Use in Future Optical Cochlear Implants

  • Christian Helke,
  • Markus Reinhardt,
  • Markus Arnold,
  • Falk Schwenzer and ,
  • Micha Haase,
  • Matthias Wachs,
  • Christian Goßler,
  • Jonathan Götz,
  • Daniel Keppeler and
  • Danny Reuter
  • + 10 authors+ 5 authors

22 December 2022

Improved hearing restoration by cochlear implants (CI) is expected by optical cochlear implants (oCI) exciting optogenetically modified spiral ganglion neurons (SGNs) via an optical pulse generated outside the cochlea. The pulse is guided to the SGNs...

(This article belongs to the Section Advanced Nanomaterials and Nanotechnology)
  • Article
  • Open Access
1 Citations
2,010 Views
12 Pages

22 October 2022

Films of zinc telluride (ZnTe) were deposited on the surface of a chemically thinned section of an optical fiber by metalorganic chemical vapor deposition. The boundary values of temperatures and the concentration ratios of the initial tellurium and...

(This article belongs to the Section Physical Sensors)
  • Review
  • Open Access
40 Citations
11,309 Views
37 Pages

Optical Fiber Sensors by Direct Laser Processing: A Review

  • David Pallarés-Aldeiturriaga,
  • Pablo Roldán-Varona,
  • Luis Rodríguez-Cobo and
  • José Miguel López-Higuera

6 December 2020

The consolidation of laser micro/nano processing technologies has led to a continuous increase in the complexity of optical fiber sensors. This new avenue offers novel possibilities for advanced sensing in a wide set of application sectors and, espec...

(This article belongs to the Collection Optical Fiber Sensors)
  • Article
  • Open Access
13 Citations
4,187 Views
14 Pages

Immunosensing for Early Detection of Rheumatoid Arthritis Biomarkers: Anti-Cyclic Citrullinated Peptide Antibodies Based on Tilted-Fiber Bragg Grating Biosensor

  • Hsin-Yi Wen,
  • Chia-Chin Chiang,
  • Rou-Yu Chen,
  • Wei-Zhi Ni and ,
  • Yu-Qiao Weng,
  • Yao-Tsung Yeh and
  • Hsiang-Cheng Hsu
  • + 2 authors+ 0 author

Rheumatoid arthritis (RA) is regarded as a chronic, immune-mediated disease that leads to the damage of various types of immune cells and signal networks, followed by inappropriate tissue repair and organ damage. RA is primarily manifested in the joi...

(This article belongs to the Section Bionanotechnology and Biofabrication)
  • Article
  • Open Access
15 Citations
2,414 Views
8 Pages

17 March 2025

We present an experimental study of a sensitivity-enhanced surface plasmon resonance (SPR) sensor utilizing a cladding etched multimode polymer optical fiber (POF) coated with a layer of gold followed by an indium tin oxide (ITO) layer. Our findings...

(This article belongs to the Section Biosensors)
  • Article
  • Open Access
6 Citations
3,871 Views
14 Pages

16 October 2022

We propose new a Si-based waveguided Superlattice-on-Insulator (SLOI) platforms for high-performance electro-optical (EO) 2 × 2 and N × M switching and 1 × 1 modulation, including broad spectrum and resonant. We present a theoretica...

(This article belongs to the Section Optical Sensors)