660 Results Found

Statement of problem: Implant-supported rehabilitations are an increasingly frequent practice to replace lost teeth. Before clinical application, all implant components should demonstrate suitable durability in laboratory studies, through fatigue tes...

(1) Background: The use of high-performance polymers for fixed restorations requires additional studies regarding their adaptability and processing with CAD/CAM technology. This in vitro study aims to assess the marginal and internal fit of PEEK and...

Micro-computed tomography (micro-CT) is an invaluable tool for the evaluation of dental implant success, whereby the assessment of bone microstructure is conducted. This review examines the role of micro-CT in evaluating bone microstructure in dental...

In this study, micro-computed tomography (CT) is utilized to detect defects of Ti-6Al-4V specimens fabricated by selective laser melting (SLM) and electron beam melting (EBM), which are two popular metal additive manufacturing methods. SLM and EBM sp...

Background: Determining the correct apical limit for root canal treatment is essential for its success. This study evaluates the accuracy of three electronic apex locators (EALs) in locating the apical constriction (AC) in molar canals. Methods: Fort...

This study evaluated the bone-to-implant contact (BIC) of various surface-treated dental implants using high-resolution micro-CT in rabbit bone, focusing on the effects of different treatments on osseointegration and implant stability before and afte...

This study aimed at evaluating volumetrically gaps and voids of calcium-silicate based materials of different generations and handling properties (BC—Endosequence BC RRM-Fast Set Condensable Putty, MTA—ProRoot MTA, and BIO—Biodentin...

The accuracy of newly developed ceramic materials is still being studied. Marginal and internal adaptation are known factors that have an essential impact on the long term success of dental restorations. The aim of this in vitro study was to evaluate...

Accumulated hard tissue debris (AHTD) is an inevitable by-product during endodontic treatment and is difficult to remove completely using traditional syringe and needle irrigation (SNI). Adjunctive irrigation is proposed to assist the clean-up of AHT...

Introduction: Biomechanical analysis of spinal structures is crucial in the evaluation of injuries, the risk of fracture, and age-related changes. Osteoporotic vertebrae are very fragile and therefore constitute a serious risk, especially in the elde...

The assessment of microgaps at the implant–abutment interface is an important factor that may influence clinical success. Thus, the aim of this study was to evaluate the size of microgaps between prefabricated and customised abutments (Astra Te...

In microCT imaging, there is a close relationship between the dose of radiation absorbed by animals and the image quality, or spatial resolution. Although the radiation levels used in these systems are generally non-lethal, they can induce cellular o...

Introduction: Comparative studies on Hounsfield units (HU) and bone volume fraction (BVF%) for the demonstration of cancellous bone density in the entire spine and in the various intravertebral regions are rare. The aim of the present study was to de...

This study’s aim is to determine the accuracy and precision of the bracket slot height in MBT 0.022″ ceramic brackets. Five brackets from 11 different systems (n = 55) were scanned using micro-computed tomography (micro-CT). The slot heig...

The main purpose of the study is to assess a selection of commercially available bone biomaterials substitutes used as scaffolds for tissue engineering applications in dentistry, performing a clinical study on human subjects and using the microcomput...

Material extrusion (MEX), commonly referred to as fused deposition modeling (FDM) or fused filament fabrication (FFF), is a versatile and cost-effective technique to fabricate suitable scaffolds for tissue engineering. Driven by a computer-aided desi...

Dental adhesives are used in a wide range of applications, including to place direct composite restorations in frontal or posterior teeth. One of the most frequent causes for the failure of composite resin restorations is microleakages. The first aim...

Gyroid structures are among the most widely used three-dimensional elements produced by various additive manufacturing technologies. This paper focuses on a metrological analysis of Flexfill 92A material specimens with a relative density (25 to 85%)...

Background and Objectives: The loss of teeth in the posterior maxillary region often leads to significant alveolar bone resorption and maxillary sinus pneumatization, complicating dental implant placement. Maxillary sinus grafting, typically using au...

The aim of this study is to evaluate the biomechanical behavior of the porcelain laminate veneer restorations (PLV) of the maxillary central incisor luted with two types of resin cements having different incisal preparations: butt joint and palatal c...

The objective of this study was to assess and compare the internal adaptation of various pulp-capping materials, namely TheraCal, Biodentine, and mineral trioxide aggregate (MTA), on the dentin of permanent teeth through the utilization of micro-comp...

Micro-computed tomography (micro-CT) is a relatively new imaging modality and the three-dimensional (3D) images obtained via micro-CT allow researchers to collect both quantitative and qualitative information on various types of samples. Micro-CT cou...

Quarter-detector computed tomography (QDCT) is an ultra-high-spatial-resolution imaging technique. This study aimed to verify the validity of trabecular structure evaluation using a QDCT scanner in the diagnosis of osteoporosis. We used a cancellous...

Introduction: This preliminary in vitro study aims to evaluate the application of micro-CT in analyzing the microstructural coupling between dental implant fixtures and prosthetic abutments, with an emphasis on understanding the effectiveness and lim...

Museums play an essential role in preserving both cultural and natural heritage, safeguarding samples that offer invaluable insights into our history and scientific understanding. The integration of micro-computed tomography (micro-CT) has significan...

Micro-computed tomography (CT) is a non-invasive alternative to conventional macroscopic dissection for the evaluation of human fetal cardiac anatomy. This paper aims to systematically review the literature regarding the use of micro-CT to examine hu...

The present work presents evaluation and experimental verification of the use of X-ray computed tomographic microscopy (micro-CT) for accurate characterization of geometry, microarchitecture, and stiffness properties of bones. These properties are cr...

Micro-computed tomography (micro-CT) is a commonly used tool for bone evaluation in animal model research. Micro-scale finite element analysis (µFEA) has been proposed to account for different loading scenarios, detailed three-dimensional (3D)...

Micro-computed tomography (micro-CT) is a promising novel medical imaging modality that allows for non-destructive volumetric imaging of surgical tissue specimens at high spatial resolution. The aim of this study is to provide a comprehensive assessm...

In this work, the porosity of plasma electrolytic oxidation (PEO)-based coatings on Al- and Mg-based substrates was studied by two imaging techniques—namely, SEM and computer microtomography. Two approaches for porosity determination were chose...

A sophisticated characterisation of a porous material structure has been challenging in material science. Three-dimensional (3D) structure analysis allows the evaluation of a material’s homogeneity, pore size distribution and pore wall properti...

Knowledge of the precise anatomy and dimensions of the pulp chambers in different teeth allows the odontologist to perform correct diagnosis, as well as treatment planning and monitoring. Clinical practice has introduced cone-beam computed tomography...

Bone structure metrics are vital for the evaluation of vertebral bone strength. However, the gold standard for measuring bone structure metrics, micro-Computed Tomography (micro-CT), cannot be used in vivo, which hinders the early diagnosis of fragil...

This study aimed to determine the incidence of dentinal microcracks after instrumenting the root canals of maxillary premolars using two novel rotary instrumentation systems. Micro-computed tomography (microCT) scans and images generated by sectionin...

We evaluated the effect of electron beam (E-beam) sterilization (25 kGy, ISO 11137) on the degradation of β-tricalcium phosphate/polycaprolactone (β-TCP/PCL) composite filaments of various ratios (0:100, 20:80, 40:60, and 60:40 TCP:PCL by m...

This paper proposes a deep-learning-based image enhancement approach that can generate high-resolution micro-CT-like images from multidetector computed tomography (MDCT). A total of 12,500 MDCT and micro-CT image pairs were obtained from 25 vertebral...

Insects exhibit diverse ecological characteristics, but species identification is challenging due to high morphological similarity. Traditional methods require genitalia dissection, which damages specimens and flattens three-dimensional structures, p...

Purpose: Biomechanical, densitometric, and histological analyses have been the mainstay for reproducible outcome measures for investigation of new bone formation and osseous healing. Here we report the addition of radiomorphometric vascular analysis...

The purpose of our study was to compare micromorphometric data obtained by cone-beam computed-tomography (CBCT) and microcomputed-tomography (micro-CT) of the augmented sinus and to evaluate the long-term stability of the bone gain achieved using Bon...

Objectives: This study aimed to create a three-dimensional histological reconstruction through the AI-assisted classification of tissues and the alignment of serial sections. The secondary aim was to evaluate if the novel technique for histological r...

Microstructural characteristics and mechanical properties of nano-reinforced cementitious mortar using multi-walled carbon nanotubes (MWCNTs), dispersed in an aqueous solution by applying ultra-solicitation, were studied using X-ray microcomputed tom...

Synthetic bone substitutes based on hydroxyapatite (HA) and β-tricalcium phosphate (β-TCP) are widely used in regenerative dentistry due to their favorable biocompatibility and osteoconductive properties. This study aimed to evaluate, throu...

In colorectal carcinoma (CRC), tumor deposits (TDs) are described as macroscopic/microscopic nests/nodules in the lymph drainage area discontinuous with the primary mass, without identifiable lymph node (LN) tissue, and not confined to vascular or pe...

The use of mass spectrometry imaging for crystallinity detection offers improved matrix selectivity and sensitivity over the techniques, such as X-ray microscopy and Raman spectrometry, that are traditionally used with this work. Crystallinity is obs...

This study aimed to describe a support material removal protocol (SMRP) from inside the root canals of three-dimensional printed teeth (3DPT) obtained by the microcomputed tomography (microCT) of a natural tooth (NT), evaluate its effectiveness by co...

Objectives: To analyze the microscopic anatomy of the human uterine cervix in two-dimensional (2D) and three-dimensional (3D) images obtained by microtomography (microCT). Methods: Human uterine cervixes surgically removed for benign gynecologic cond...

Osteosarcoma treatment comprises pre-surgical chemotherapy followed by radical surgery and further chemotherapy cycles, but the prognosis has been far from satisfactory. No new drugs or treatment modalities have been developed for clinical use in the...

The use of micro-computed tomography (micro-CT) has become widespread in the examination of dental tissue due to its great precision in small-scale work. Its usefulness in measuring tissue mineral density has been demonstrated; however, it is necessa...

The aim of this study was to evaluate the bio-absorption and bone regeneration of human tooth-derived dentin scaffold, entitled as perforated root-demineralized dentin matrix (PR-DDM), after in vivo implantation into the critical-size iliac defects....

Image-guided mouse irradiation is essential to understand interventions involving radiation prior to human studies. Our objective is to employ Swin UNEt TRansformers (Swin UNETR) to segment native micro-CT and contrast-enhanced micro-CT scans and ben...