Skip to Content

1,071 Results Found

  • Article
  • Open Access
41 Citations
5,668 Views
16 Pages

Fire Behavior of Thermally Thin Materials in Cone Calorimeter

  • Marouane El Gazi,
  • Rodolphe Sonnier,
  • Stéphane Giraud,
  • Marcos Batistella and ,
  • Shantanu Basak,
  • Loïc Dumazert,
  • Raymond Hajj and
  • Roland El Hage
  • + 3 authors+ 0 author

15 April 2021

In this study, a representative set of thermally thin materials including various lignocellulosic and synthetic fabrics, dense wood, and polypropylene sheets were tested using a cone calorimeter at different heat fluxes. Time-to-ignition, critical he...

(This article belongs to the Special Issue Advances in Flame Retardant Polymeric Materials II)
  • Article
  • Open Access
14 Citations
4,310 Views
20 Pages

Flammability of Thick but Thermally Thin Materials including Bio-Based Materials

  • Rodolphe Sonnier,
  • Loïc Dumazert,
  • Arnaud Regazzi,
  • Lily Deborde and
  • Christophe Lanos

The fire reaction of various types of flammable lightweight materials is investigated using a cone calorimeter. The influences of parameters such as sample density, sample mass, effective heat of combustion and heat flux on the mass loss after exposi...

(This article belongs to the Special Issue Recent Advances in Flame Retardant Polymeric Materials)
  • Article
  • Open Access
10 Citations
5,999 Views
12 Pages

Comparison of Fire Behaviors of Thermally Thin and Thick Rubber Latex Foam under Bottom Ventilation

  • Qi Yuan,
  • Dongmei Huang,
  • Yiwei Hu,
  • Liming Shen and ,
  • Long Shi and
  • Mingzhen Zhang
  • + 1 author+ 0 author

8 January 2019

Fire behaviors of rubber latex foam under different thickness conditions (d = 1, 2, and 5 cm) were explored by using a self-built small-scale experimental platform. It can be shown that the flame spread menchanism of thermally thin and thermally thic...

  • Article
  • Open Access
13 Citations
1,742 Views
10 Pages

6 June 2024

This paper presents a comprehensive investigation into the thermal stability of superlattice-like (SLL) thin films fabricated by varying the sputtering sequences of the SLL [Ge8Sb92(25nm)/GeTe(25nm)]1 and SLL [GeTe(25nm)/Ge8Sb92(25nm)]1 configuration...

(This article belongs to the Topic Advances in Energy Storage Materials/Devices and Solid-State Batteries)
  • Article
  • Open Access
19 Citations
4,692 Views
17 Pages

3 March 2019

This paper presents an experimental study of thermal management in a tablet PC under intermittent operation, with phase change materials (PCMs) encapsulated in a very thin aluminized laminate film container. It complements a study of the same system...

(This article belongs to the Special Issue Advanced Applications of Phase Change Materials)
  • Article
  • Open Access
20 Citations
4,875 Views
14 Pages

Influence of MoS2 Nanosheet Size on Performance of Drilling Mud

  • Sung Hyun Hong,
  • Hae Jin Jo,
  • Min-Ju Choi,
  • Ho Won Jang and ,
  • Young Ju Kim,
  • Wook Ryol Hwang and
  • Soo Young Kim
  • + 2 authors+ 0 author

13 February 2019

Water-based drilling mud (WBM) is a non-Newtonian fluid that has a variety of applications such as in transporting cuttings during drilling, protecting the borehole, and cooling the drill bit. With the development of nano-technology, various nanopart...

(This article belongs to the Special Issue 2D Polymers and Composites: Preparation, Characterization and Application)
  • Article
  • Open Access
44 Citations
9,164 Views
24 Pages

20 August 2014

Marble is a natural material, used in the construction field since antiquity. It has always been used to communicate monumentality and solidity. Nowadays new technologies permit marble to express new languages: particularly, translucent marble techn...

(This article belongs to the Special Issue 14th CIRIAF National Congress - Energy, Environment and Sustainable Development)
  • Article
  • Open Access
643 Views
38 Pages

23 May 2026

This paper investigates the thermal buckling behavior of a four-edge simply supported bimodular functionally graded rectangular thin plate subjected to thermal loads. Unlike existing studies, this work introduces the bimodular effect into the thermal...

(This article belongs to the Special Issue Computational Mechanics and Applied Mathematics, 2nd Edition)
  • Article
  • Open Access
2 Citations
1,956 Views
8 Pages

MnBi2Te4 Thin-Film Photodetector with a Millisecond Response Speed and Long-Term Air Stability

  • Ming Yang,
  • Haotian Ren,
  • Wenze Deng,
  • Haoliang Chang and ,
  • Qiqin Li,
  • Hongxi Zhou,
  • Xiaoguang Tu,
  • Mian Zhong,
  • Fei Li and
  • Xinyu Zhu
  • + 5 authors+ 0 author

4 September 2024

Topological materials with well-defined surfaces and edges have become a prominent research topic. As topological insulators, MnBi2Te4 thin films, with their unique surfaces, exhibit exceptional electron transport properties and good applicability in...

(This article belongs to the Special Issue Thermoelectric Thin Films for Thermal Energy Harvesting)
  • Article
  • Open Access
11 Citations
6,327 Views
10 Pages

31 August 2017

The thermal conductivity of a nanoscale yttrium iron garnet (Y3Fe5O12, YIG) thin-film prepared by a sol-gel method was evaluated using the ultrafast pump-probe technique in the present study. The thermoreflectance change on the surface of a 250 nm th...

(This article belongs to the Special Issue Sol-Gel Preparation of Nanomaterials)
  • Article
  • Open Access
21 Citations
6,284 Views
19 Pages

3 December 2017

This work concerns the critical buckling temperature of functionally graded rectangular thin plates; the properties of functionally graded material vary continuously in accordance with the power law of thickness z. Closed form solutions for the criti...

(This article belongs to the Special Issue Functionally Graded Material (FGM) and Functionally Graded Carbon Nanotube (FG-CNT) Reinforced Composites)
  • Article
  • Open Access
1 Citations
2,187 Views
39 Pages

14 January 2025

The purpose of this study is to analyze the large deflection problem of bimodular functionally graded truncated thin conical shells under the transverse mechanical load and non-uniform thermal load, in which two different boundary constraints of the...

(This article belongs to the Special Issue Mechanics of Thin-Walled Structures and Other Lightweight Constructions)
  • Review
  • Open Access
1,780 Views
33 Pages

14 August 2026

Nitrocellulose (NC) is a long-established energetic polymer whose autocatalytic NOx-driven degradation and conversion-dependent decomposition kinetics remain challenges for thin-film micro-ignition systems. This review examines NC as an energetic pol...

(This article belongs to the Special Issue Cellulose and Its Composites: Preparation and Applications)
  • Article
  • Open Access
9 Citations
5,146 Views
17 Pages

Tunable Coefficient of Thermal Expansion of Composite Materials for Thin-Film Coatings

  • Xu Long,
  • Tianxiong Su,
  • Zubin Chen,
  • Yutai Su and
  • Kim S. Siow

15 June 2022

In most engineering applications, the coefficients of thermal expansion (CTEs) of different materials in integrated structures are inconsistent, especially for the thin-film multilayered coatings. Therefore, mismatched thermal deformation is induced...

(This article belongs to the Special Issue Coatings for Advanced Devices)
  • Review
  • Open Access
1 Citations
1,322 Views
56 Pages

Thin-Film Solar Cells for Solar Thermal Cooling, Heating, and Energy Storage Systems: Materials, Manufacturing, and Emerging Applications

  • Sunzid Hassan,
  • Sabbir Alom Shuvo,
  • Jarif Ul Alam,
  • Nafiya Islam and ,
  • Md Faiaz Al Islam,
  • Yead Rahman,
  • Iftesam Nabi,
  • Fatima Yeasmin,
  • Md Ashfaq Siddiquee and
  • M Shafiqur Rahman
  • + 7 authors+ 2 authors

2 June 2026

Thin-film solar cells (TFSCs) remain a cornerstone of the global transition toward renewable energy, characterized by consistent reductions in manufacturing costs and steady gains in power conversion efficiency. In addition to electricity generation,...

(This article belongs to the Special Issue Advanced Technology for Solar Thermal Cooling, Heating, and Energy Storage—2nd Edition)
  • Review
  • Open Access
4 Citations
2,492 Views
10 Pages

Thermal Transport in Extremely Confined Metallic Nanostructures: TET Characterization

  • Huan Lin,
  • Fuhua Shen,
  • Jinbo Xu,
  • Lijun Zhang and ,
  • Shen Xu,
  • Na Liu and
  • Siyi Luo
  • + 2 authors+ 0 author

27 December 2022

In recent years, the continuous development of electronic chips and the increasing integration of devices have led to extensive research on the thermal properties of ultrathin metallic materials. In particular, accurate characterization of their ther...

(This article belongs to the Special Issue Energy Transport at the Micro/Nanoscale)
  • Article
  • Open Access
380 Views
18 Pages

24 July 2026

The thermal contact resistance between a clip-attached TO 247 package and heat sink is a very large contributor to the total thermal resistance. Therefore, it is important to investigate its reliability and lifetime behavior. The novelty of this inve...

(This article belongs to the Special Issue Advances in Thermal Management and Reliability of Electronic Systems)
  • Review
  • Open Access
26 Citations
9,464 Views
43 Pages

Fluorescence Phenomena in Amyloid and Amyloidogenic Bionanostructures

  • B. Apter,
  • N. Lapshina,
  • H. Barhom,
  • B. Fainberg and ,
  • A. Handelman,
  • A. Accardo,
  • C. Diaferia,
  • P. Ginzburg,
  • G. Morelli and
  • G. Rosenman
  • + 5 authors+ 0 author

3 August 2020

Nanoscale optical labeling is an advanced bioimaging tool. It is mostly based on fluorescence (FL) phenomena and enables the visualization of single biocells, bacteria, viruses, and biological tissues, providing monitoring of functional biosystems in...

(This article belongs to the Special Issue Structure and Properties of Organic Dyes in Solid State)
  • Article
  • Open Access
10 Citations
3,815 Views
9 Pages

Study of Structural and Optoelectronic Properties of Thin Films Made of a Few Layered WS2 Flakes

  • Anna Łapińska,
  • Michał Kuźniewicz,
  • Arkadiusz P. Gertych,
  • Karolina Czerniak-Łosiewicz and ,
  • Klaudia Żerańska-Chudek,
  • Anna Wróblewska,
  • Michał Świniarski,
  • Anna Dużyńska,
  • Jarosław Judek and
  • Mariusz Zdrojek
  • + 5 authors+ 0 author

24 November 2020

We report a surfactant-free exfoliation method of WS2 flakes combined with a vacuum filtration method to fabricate thin (<50 nm) WS2 films, that can be transferred on any arbitrary substrate. Films are composed of thin (<4 nm) single flakes, fo...

(This article belongs to the Section Thin Films and Interfaces)
  • Review
  • Open Access
14 Citations
3,470 Views
23 Pages

3 August 2022

Owing to the versatility without expanding the machine’s size, thin-wall has been widely used in high-value parts. The investigation of laser additive manufacturing (LAM), which has advantages such as high powder density, easy controllability,...

(This article belongs to the Special Issue Effects of Laser Treatment on Surface Characterization and Mechanical Properties of Alloys)
  • Article
  • Open Access
8 Citations
2,223 Views
14 Pages

Detection of Propionic Acids Trapped in Thin Zeolite Layer Using Thermal Desorption Analysis

  • Giuseppe Oliva,
  • Antonino S. Fiorillo,
  • Syed Kamrul Islam and
  • Salvatore A. Pullano

23 August 2023

Volatile organic compounds (VOCs) have recently received considerable attention for the analysis and monitoring of different biochemical processes in biological systems such as humans, plants, and microorganisms. The advantage of using VOCs to gather...

(This article belongs to the Section Chemical Sensors)
  • Brief Report
  • Open Access
9 Citations
4,967 Views
6 Pages

19 May 2023

The thermal response time of a thin-film resistance temperature detector (RTD) array sensor was measured for a high-intensity focused ultrasound (HIFU) phantom. As the temperature inside materials change rapidly within several seconds, it is importan...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
1 Citations
2,618 Views
12 Pages

11 January 2023

Predicting the interfacial thermal resistance (ITR) for various material systems is a time-consuming process. In this study, we applied our previously proposed ITR machine learning models to discover the material systems that satisfy both high transp...

(This article belongs to the Section A: Physics)
  • Article
  • Open Access
8 Citations
2,671 Views
16 Pages

Exploring the Influence of P3HT on PTCA Crystallization and Phase Behavior in Thin Films

  • Pallavi Kumari,
  • Barbara Hajduk,
  • Henryk Bednarski,
  • Paweł Jarka and ,
  • Henryk Janeczek and
  • Mieczysław Łapkowski
  • + 1 author+ 0 author

8 November 2023

The thermal properties and alignment of crystallinity of materials in thin films play crucial roles in the performance and reliability of various devices, especially in the fields of electronics, materials science, and engineering. The slight variati...

(This article belongs to the Special Issue Chemical-Physical Properties and Applications of Nano-Scaled Oxides)
  • Article
  • Open Access
6 Citations
3,489 Views
14 Pages

Studies of Thermal Conductivity of Graphite Foil-Based Composite Materials

  • Vladimir A. Shulyak,
  • Nikolai S. Morozov,
  • Roman A. Minushkin,
  • Viktor Yu. Gubin and ,
  • Dmitriy V. Vakhrushin,
  • Alexandra V. Gracheva,
  • Ildar Kh. Nigmatullin,
  • Sergei N. Chebotarev and
  • Viktor V. Avdeev
  • + 4 authors+ 0 author

8 January 2025

We have proposed and developed a method for measuring the thermal conductivity of highly efficient thermal conductors. The measurement method was tested on pure metals with high thermal conductivity coefficients: aluminum (99.999 wt.% Al) and copper...

(This article belongs to the Section Carbon Materials)
  • Article
  • Open Access
6 Citations
5,709 Views
10 Pages

31 January 2019

The 3ω method is an attractive technique for measuring the thermal conductivity of materials; but it cannot characterise high thermal conductivity ultra-thin film/substrate systems because of the deep heat penetration depth. Recently, a modifie...

  • Feature Paper
  • Article
  • Open Access
13 Citations
4,707 Views
13 Pages

26 July 2022

Most current thermal MEMS use fragile structures such as thin-film membranes or microcantilevers for thermal isolation. To increase the robustness of these devices, solid thermal insulators that are compatible with MEMS cleanroom processing are neede...

(This article belongs to the Special Issue The Fabrication of Microstructures from Powders and Their Applications in Microsystems)
  • Article
  • Open Access
62 Citations
12,994 Views
25 Pages

Enhancement and Tunability of Near-Field Radiative Heat Transfer Mediated by Surface Plasmon Polaritons in Thin Plasmonic Films

  • Svetlana V. Boriskina,
  • Jonathan K. Tong,
  • Yi Huang,
  • Jiawei Zhou and ,
  • Vazrik Chiloyan and
  • Gang Chen
  • + 1 author+ 0 author

18 June 2015

The properties of thermal radiation exchange between hot and cold objects can be strongly modified if they interact in the near field where electromagnetic coupling occurs across gaps narrower than the dominant wavelength of thermal radiation. Using...

(This article belongs to the Special Issue New Frontiers in Plasmonics and Metamaterials)
  • Article
  • Open Access
12 Citations
4,302 Views
12 Pages

Characterization of Magnetron Sputtered BiTe-Based Thermoelectric Thin Films

  • Zhenxue Zhang,
  • Mikdat Gurtaran,
  • Xiaoying Li,
  • Hio-Ieng Un and ,
  • Yi Qin and
  • Hanshan Dong
  • + 1 author+ 0 author

3 January 2023

Thermoelectric (TE) technology attracts much attention due to the fact it can convert thermal energy into electricity and vice versa. Thin-film TE materials can be synthesized on different kinds of substrates, which offer the possibility of the contr...

(This article belongs to the Special Issue Nanostructured Materials for Energy Applications)
  • Article
  • Open Access
9 Citations
5,273 Views
12 Pages

In this paper, we demonstrate the practicality and feasibility of the flash light-sintering method to fabricate the ceramic material perovskite structure for lanthanum nickel oxide (LaNiO3; LNO) thin films using flash light irradiation equipment. LNO...

  • Article
  • Open Access
10 Citations
3,351 Views
12 Pages

Analysis of Thermal Stress in Vanadium Dioxide Thin Films by Finite Element Method

  • Yuemin Wang,
  • Lebin Wang,
  • Jinxin Gu,
  • Xiangqiao Yan and ,
  • Jiarui Lu,
  • Shuliang Dou,
  • Yao Li and
  • Lei Wang
  • + 3 authors+ 0 author

30 November 2022

The buckling, de-lamination, and cracking of the thin film/substrate system caused by thermal stress is the main obstacle for functional failure. Moreover, the thermal stress of vanadium dioxide (VO2) thin film may be more complicated due to the stre...

(This article belongs to the Section Physical Chemistry at Nanoscale)
  • Feature Paper
  • Article
  • Open Access
5 Citations
3,626 Views
21 Pages

24 November 2018

In practice, there are some considerations to study stability, reliability, and output power optimization of a thermoelectric thin film operating dynamically. In this study stability and performance of a zinc antimonide thin film thermoelectric (TE)...

(This article belongs to the Special Issue Recent Advances in Thermoelectric Materials)
  • Article
  • Open Access
5 Citations
2,310 Views
12 Pages

Bimetallic Thin-Walled Box Beam Thermal Buckling Response

  • Sandra Kvaternik Simonetti,
  • Goran Turkalj,
  • Damjan Banić and
  • Domagoj Lanc

27 October 2022

A beam model for thermal buckling analysis of a bimetallic box beam is presented. The Euler–Bernoulli–Vlasov beam theory is employed considering large rotations but small strains. The nonlinear stability analysis is performed using an upd...

(This article belongs to the Special Issue Feature Papers in Materials Simulation and Design)
  • Article
  • Open Access
9 Citations
3,716 Views
27 Pages

3 September 2024

This research focuses on investigating the buckling strength of thin-walled composite structures featuring various shapes of holes, laminates, and composite materials. A parametric study is conducted to optimize and identify the most suitable combina...

(This article belongs to the Special Issue Innovations in Modelling and Simulations: Bridging Microstructures to Macroscopic Properties in Advanced Materials)
  • Article
  • Open Access
8 Citations
2,854 Views
11 Pages

Effects of Substrates on Thin-Film Growth of Nickel Zinc Ferrite by Spin-Spray Deposition

  • Hai Liu,
  • Zhong Yu,
  • Xinglian Song,
  • Maojun Ran and ,
  • Xiaona Jiang,
  • Zhongwen Lan and
  • Ke Sun
  • + 2 authors+ 0 author

28 March 2023

In certain applications, such as on-chip integrated inductors, ferrite materials are highly desirable owing to their superior magnetic and insulation properties. Spin-spray deposition is a promising method for producing high-quality thin films of fer...

(This article belongs to the Special Issue Functional Magnetic and Dielectric Composites: Fabrication, Properties and Applications)
  • Article
  • Open Access
31 Citations
5,505 Views
16 Pages

Al1−xScxN Thin Films at High Temperatures: Sc-Dependent Instability and Anomalous Thermal Expansion

  • Niklas Wolff,
  • Md Redwanul Islam,
  • Lutz Kirste,
  • Simon Fichtner and ,
  • Fabian Lofink,
  • Agnė Žukauskaitė and
  • Lorenz Kienle
  • + 2 authors+ 0 author

8 August 2022

Ferroelectric thin films of wurtzite-type aluminum scandium nitride (Al1−xScxN) are promising candidates for non-volatile memory applications and high-temperature sensors due to their outstanding functional and thermal stability exceeding most...

(This article belongs to the Special Issue Piezoelectric Aluminium Scandium Nitride (AlScN) Thin Films: Material Development and Applications in Microdevices)
  • Article
  • Open Access
9 Citations
2,445 Views
12 Pages

4 November 2022

To obtain highly homogeneous cobalt–nickel aluminate spinels with small crystallite sizes, CoNiAl alloy thin films were primarily deposited using Laser-induced Thermionic Vacuum Arc (LTVA) as a versatile method for performing processing of mult...

(This article belongs to the Special Issue Applied Physics and Nanomaterials)
  • Article
  • Open Access
16 Citations
9,150 Views
20 Pages

30 October 2019

As the size of portable electronic devices, like tablet computers or smartphones, continues to decrease and their performance continues to increase, thermal management of the generated heat is becoming an ever more important issue. Phase change mater...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
1 Citations
3,182 Views
21 Pages

Thermal Stability of Thin Metal Films on GaN Surfaces: Morphology and Nanostructuring

  • Andrzej Stafiniak,
  • Wojciech Macherzyński,
  • Adam Szyszka,
  • Radosław Szymon and ,
  • Mateusz Wośko and
  • Regina Paszkiewicz
  • + 1 author+ 0 author

27 November 2025

The development of metal nanostructures on large-area Gallium Nitride (GaN) surfaces has the potential to enable new, low-cost technologies for III-N semiconductor layer nanostructuring. Self-assembled nanostructures are typically formed through the...

(This article belongs to the Section Nanofabrication and Nanomanufacturing)
  • Article
  • Open Access
1,179 Views
15 Pages

Topographic, Thermal and Chemical Characterization of Oxidized Cu and Cu-Ag Thin Films

  • Maria C. Carrupt,
  • Ana M. Ferraria,
  • Ana P. Serro and
  • Ana P. Piedade

30 September 2025

This study investigated the effects of silver doping, natural ageing, and thermal-induced oxidation on the surface chemistry, morphology, and thermal performance of copper thin films. Ag is used as a doping element in Cu because, in bulk materials it...

(This article belongs to the Section Thin Films and Interfaces)
  • Article
  • Open Access
7 Citations
3,135 Views
13 Pages

Atomistic Insights on Surface Quality Control via Annealing Process in AlGaN Thin Film Growth

  • Qing Peng,
  • Zhiwei Ma,
  • Shixian Cai,
  • Shuai Zhao and ,
  • Xiaojia Chen and
  • Qiang Cao
  • + 1 author+ 0 author

16 April 2023

Aluminum gallium nitride (AlGaN) is a nanohybrid semiconductor material with a wide bandgap, high electron mobility, and high thermal stability for various applications including high-power electronics and deep ultraviolet light-emitting diodes. The...

(This article belongs to the Special Issue Mathematical and Computational Modeling for Nanohybrids)
  • Article
  • Open Access
5 Citations
2,439 Views
14 Pages

Enhancement of ZT in Bi0.5Sb1.5Te3 Thin Film through Lattice Orientation Management

  • Wei-Han Tsai,
  • Cheng-Lung Chen,
  • Ranganayakulu K. Vankayala,
  • Ying-Hsiang Lo and ,
  • Wen-Pin Hsieh,
  • Te-Hsien Wang,
  • Ssu-Yen Huang and
  • Yang-Yuan Chen
  • + 3 authors+ 0 author

25 April 2024

Thermoelectric power can convert heat and electricity directly and reversibly. Low-dimensional thermoelectric materials, particularly thin films, have been considered a breakthrough for separating electronic and thermal transport relationships. In th...

(This article belongs to the Section Nanoelectronics, Nanosensors and Devices)
  • Article
  • Open Access
1 Citations
3,304 Views
9 Pages

1 September 2024

This study explores the feasibility of using Cu/AZO thin films as low-emissivity materials with antibacterial properties, fabricated using the linear sputtering method. The linear sputtering technique deposits thin films onto continuous substrates, o...

  • Article
  • Open Access
8 Citations
4,949 Views
10 Pages

11 June 2021

The temperature dependence thermal conductivity of the indium-gallium-zinc oxide (IGZO) thin films was investigated with the differential three-omega method for the clear demonstration of nanocrystallinity. The thin films were deposited on an alumina...

(This article belongs to the Special Issue Thermal Transport in Nanoscale)
  • Article
  • Open Access
29 Citations
6,400 Views
16 Pages

1 March 2019

The thickness of the hot component in a turbine engine is usually small. Therefore, the traditional prediction model of anisotropic thermal conductivity (ATC) based on the periodic hypothesis may be improper for use in the thermal analysis of ceramic...

(This article belongs to the Special Issue Ceramic Composites and Films)
  • Feature Paper
  • Article
  • Open Access
6 Citations
1,557 Views
11 Pages

Nearly Perfect Crystal Orientation of Nanocrystalline Bismuth Telluride Thin Films Deposited by Pressure-Gradient Sputtering and Their Thermal Transport Properties

  • Tetsuya Takizawa,
  • Keisuke Kaneko,
  • Yoshiyuki Shinozaki,
  • Takumi Kaneko and ,
  • Hiroshi Murotani and
  • Masayuki Takashiri
  • + 1 author+ 0 author

22 October 2025

Bismuth telluride (Bi2Te3) is a thermoelectric material that exhibits excellent thermoelectric properties primarily because of its low thermal conductivity. The ideal structure of Bi2Te3 contains nanocrystals with a high crystal orientation. However,...

(This article belongs to the Collection Feature Paper Collection in Thin Films)
  • Article
  • Open Access
13 Citations
5,642 Views
18 Pages

22 January 2015

We present investigations on the impact of material-integrated sensors with the help of finite element-based modeling. A sensor (inlay) integrated with a material (matrix) is always a foreign body in the material, which can lead to a “wound effect”,...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
7,164 Views
19 Pages

Using Polarized Spectroscopy to Investigate Order in Thin-Films of Ionic Self-Assembled Materials Based on Azo-Dyes

  • Miguel R. Carro-Temboury Martin Kühnel,
  • Mariam Ahmad,
  • Frederik Andersen,
  • Ári Brend Bech and ,
  • H. Krestian L. Bendixen,
  • Patrick R. Nawrocki,
  • Anders J. Bloch,
  • Ilkay Bora,
  • Tahreem A. Bukhari and
  • Thomas Just Sørensen
  • + 62 authors+ 57 authors

15 February 2018

Three series of ionic self-assembled materials based on anionic azo-dyes and cationic benzalkonium surfactants were synthesized and thin films were prepared by spin-casting. These thin films appear isotropic when investigated with polarized optical m...

  • Article
  • Open Access
5 Citations
2,013 Views
19 Pages

Investigations on Thermal Transitions in PDPP4T/PCPDTBT/AuNPs Composite Films Using Variable Temperature Ellipsometry

  • Paweł Jarka,
  • Barbara Hajduk,
  • Pallavi Kumari,
  • Henryk Janeczek and ,
  • Marcin Godzierz,
  • Yao Mawuena Tsekpo and
  • Tomasz Tański
  • + 2 authors+ 0 author

6 March 2025

Herein, we report a comprehensive investigation on the thermal transitions of thin films of poly [2,5-bis(2-octyldodecyl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione -3,6-diyl)-alt-(2,2′;5′,2″;5″,2′″-quaterthiophen-5,5&p...

(This article belongs to the Special Issue Modeling of Polymer Composites and Nanocomposites)
  • Article
  • Open Access
17 Citations
5,286 Views
18 Pages

CuO Thin Films Functionalized with Gold Nanoparticles for Conductometric Carbon Dioxide Gas Sensing

  • Robert Wimmer-Teubenbacher,
  • Florentyna Sosada-Ludwikowska,
  • Bernat Zaragoza Travieso,
  • Stefan Defregger and ,
  • Oeznur Tokmak,
  • Jan Steffen Niehaus,
  • Marco Deluca and
  • Anton Köck
  • + 3 authors+ 0 author

Metal oxides (MOx) are a well-established material for gas sensing. MOx-based gas sensors are sensitive to a wide variety of gases. Furthermore, these materials can be applied for the fabrication of low-cost and -power consumption devices in mass pro...

of 22