Skip to Content

507 Results Found

  • Article
  • Open Access
1 Citations
2,969 Views
15 Pages

Hydroxyapatite Nanoparticle Modification of 3D-Printed Crown Resin: Effects of Concentration on Surface Roughness and Vickers Hardness After Thermocycling

  • Elif Koç,
  • Dalndushe Abdulai,
  • Oyun-Erdene Batgerel,
  • Oktay Yazıcıoğlu and ,
  • Raghib Suradi and
  • Mehran Moghbel
  • + 1 author+ 0 author

Background: This in vitro study evaluated the effect of hydroxyapatite nanoparticle (nano-HAp) incorporation on surface roughness and Vickers hardness of a 3D-printed crown resin after thermocycling. Methods: Disk-shaped specimens (N = 84) were modif...

(This article belongs to the Special Issue Surface Analyses, Physicochemical and Mechanical Properties of Dental Biomaterials (2nd Edition))
  • Article
  • Open Access
3 Citations
6,462 Views
11 Pages

29 October 2020

The paper presents a method for estimating the value of equibiaxial stress in a surface layer of a material by using a modified hardness measurement procedure with a Vickers indenter. A certain characteristic parameter was defined and related to the...

(This article belongs to the Special Issue Fatigue and Fracture of Materials)
  • Article
  • Open Access
4 Citations
3,104 Views
9 Pages

30 September 2022

The aim of this study was to investigate the effect of repressing leftover heat-pressed lithium disilicate material on its mechanical and optical properties. A lithium disilicate ingot (IPS e.max® Press, IvoclarVivadent, Schaan, Liechtenstein) sh...

(This article belongs to the Special Issue Ceramic Materials: Processing, Properties and Applications)
  • Article
  • Open Access
1 Citations
2,890 Views
15 Pages

A Preliminary Stability Assessment of Three State-of-the-Art CAD/CAM Materials Under Human Gingival Cell Culture

  • Eduard Gatin,
  • Stefan Iordache,
  • Ana Maria Iordache,
  • Alexandra Totan (Ripsvki) and ,
  • Antoniu Moldovan and
  • Catalin Luculescu
  • + 1 author+ 0 author

17 January 2025

CAM/CAD composites are widely used as dental restoration materials due to their resistivity to wear. The purpose of this study was to determine the effect of human gingival fibroblast cells on three different computer-aided design/computer-aided manu...

(This article belongs to the Special Issue Advanced Polymeric Materials for Dental Applications III)
  • Article
  • Open Access
5 Citations
2,283 Views
18 Pages

Effect of Cleaning Protocols on Surface Roughness of Current Polymeric Denture Materials

  • Lisa Brinkmann,
  • Florian Fuchs,
  • Martin Rosentritt,
  • Oliver Schierz and ,
  • Andreas Koenig and
  • Daniel R. Reissmann
  • + 1 author+ 0 author

24 September 2025

Surface roughness influences biofilm adhesion on denture base materials, impacting oral health. Despite advances in polymeric denture materials, the effects of common cleaning protocols on their surface texture remain inadequately characterized. This...

(This article belongs to the Section Dental Biomaterials)
  • Article
  • Open Access
45 Citations
6,329 Views
15 Pages

12 July 2019

This study compares the mechanical properties and wear ability of five CAD/CAM (computer-aided design/computer-aided manufacturing) millable dental blocks. All the discs, including Amber Mill Hybrid, Vita Enamic, Katana Avencia, Lava Ultimate, and Am...

  • Article
  • Open Access
6 Citations
1,826 Views
15 Pages

5 January 2026

Surface quality is crucial for precise micro-Vickers hardness measurements. Current standards provide limited quantitative guidance on acceptable surface roughness levels. This study examines the impact of varying surface roughness levels on measured...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Communication
  • Open Access
1 Citations
1,334 Views
10 Pages

7 January 2026

In order to determine the causes of crack defects in Mn18Cr2 high-manganese wear-resistant steel plates, this paper conducted a systematic analysis of the steel plates’ microstructure, chemical composition, and hardness via metallographic micro...

(This article belongs to the Special Issue Advances in Friction, Wear-Resistant and Solid-Lubricating Properties of Materials)
  • Article
  • Open Access
3 Citations
2,795 Views
17 Pages

Milling of Complex Surfaces of EN 10060 Steel after HVOF Sprayed NiCrBSi Coatings

  • Jan Valíček,
  • Marta Harničárová,
  • Jan Řehoř,
  • Milena Kušnerová and ,
  • Jaroslava Fulemová,
  • Miroslav Gombár,
  • Ludmila Kučerová,
  • Jan Filipenský and
  • Jan Hnátík
  • + 4 authors+ 0 author

30 July 2020

The high-velocity oxy-fuel spraying process was used to investigate and improve the surface properties of a workpiece. The research was focused on the spherical surface of a workpiece made of high-strength steel, a ball and socket assembly. After spr...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
13 Citations
3,227 Views
23 Pages

Investigating the Effect of Staining Beverages on the Structural and Mechanical Integrity of Dental Composites Using Raman, Fourier Transform Infrared (FTIR) Spectroscopy, and Microhardness Analysis

  • Ramona Dumitrescu,
  • Iasmina-Mădălina Anghel,
  • Carmen Opris,
  • Titus Vlase and ,
  • Gabriela Vlase,
  • Daniela Jumanca,
  • Atena Galuscan,
  • Nicoleta A. Toderas,
  • Roxana Oancea and
  • Octavia Balean
  • + 6 authors+ 1 author

25 March 2025

Background and Objectives: Resin composites are widely used in restorative dentistry due to their favorable mechanical properties and aesthetics. However, their clinical performance depends on factors such as chemical composition, microhardness, and...

(This article belongs to the Special Issue Medicine and Dentistry: New Methods and Clinical Approaches—2nd Edition)
  • Feature Paper
  • Article
  • Open Access
685 Views
26 Pages

Mechanical and Optical Characterization of 0.7 mm Ion-Exchange-Strengthened Aluminosilicate Glass for Building-Integrated Photovoltaics

  • Paweł Kwaśnicki,
  • Ludmiła Marszałek,
  • Dariusz Augustowski,
  • Anna Gronba-Chyła and
  • Agnieszka Generowicz

15 May 2026

Ion-exchange-strengthened 0.7 mm aluminosilicate glass offers a promising route to lightweight, mechanically robust front covers for building-integrated photovoltaic (BIPV) modules, but systematic characterization at sub-millimeter thicknesses remain...

  • Article
  • Open Access
8 Citations
5,069 Views
19 Pages

4 July 2019

Three-dimensional finite element-based numerical analysis of Vickers indenter hardness test was conducted to investigate the effect of frictional conditions and material anisotropy on indentation results of deep drawing quality steel sheets. The stra...

(This article belongs to the Section Materials Physics)
  • Article
  • Open Access
1 Citations
1,790 Views
12 Pages

12 November 2024

The microstructure and structure of a Super304H superheater steel pipe after 47,000 h were analyzed by metallographic microscope, scanning electron microscope (SEM), and EDS, and its mechanical properties were measured by hardness meter. The results...

  • Article
  • Open Access
11 Citations
3,694 Views
22 Pages

Corrosion Tendency of S235 Steel in 3.5% NaCl Solution and Drinking Water During Six Months of Exposure

  • Daniela Laura Buruiană,
  • Alina Crina Mureşan,
  • Nicoleta Bogatu,
  • Viorica Ghisman and ,
  • Elena Emanuela Herbei and
  • Vasile Başliu
  • + 1 author+ 0 author

6 December 2024

The pipeline transport industry is constantly developing due to the high efficiency, long life, varied diameters of the pipelines, but a significant problem is the corrosion that occurs because of the corrosive attack of the various environments in w...

  • Article
  • Open Access
28 Citations
3,288 Views
15 Pages

12 July 2023

This paper investigated the effect of shot peening on the strength and corrosion properties of 6082-T651 aluminium alloy. The microstructure, surface roughness, microhardness, residual stresses, and corrosion behaviour were investigated and compared...

  • Article
  • Open Access
723 Views
12 Pages

Effects of Cleaning Agents on the Microhardness and Surface of Acrylic and Copolyester Removable Appliances

  • Berna Kuter,
  • Funda Senturk,
  • Ilhan Uzel,
  • Fahinur Ertugrul and
  • Gülden Diniz

10 February 2026

This study evaluated whether commonly used household cleaning agents affect the surface microhardness of acrylic and copolyester materials used in pediatric removable appliances and sought to identify safe options for daily home cleaning. Standardize...

(This article belongs to the Special Issue Recent Developments and Emerging Trends in Dental Diseases and Dental Materials)
  • Article
  • Open Access
12 Citations
7,003 Views
12 Pages

The surface mechanical properties of thermoplastics are crucially important for evaluating molded products’ vulnerability to scratching. Because surface mechanical properties reflect material performance directly in terms of durability and fric...

  • Article
  • Open Access
3 Citations
3,707 Views
15 Pages

Titanium alloy Ti-6Al-4V is known for both its excellent mechanical properties and its low surface hardness. This study explores a two-step process for depositing a hard nanocrystalline coating onto the surface of the Ti-alloy, followed by surface me...

  • Article
  • Open Access
6 Citations
2,050 Views
13 Pages

3 November 2025

The mechanical and microstructural properties of monolithic zirconia ceramics are significant factors for their long-term clinical performance. This study aims to investigate the effects of hydrothermal aging on these properties for the 3Y-TZP, 4Y-TZ...

(This article belongs to the Section Inorganic Materials and Metal-Organic Frameworks)
  • Article
  • Open Access
6 Citations
2,580 Views
15 Pages

Quantitative Distribution Characterization and Correlation Study of Composition, Structure and Hardness of Rim Region in Railway Wheel

  • Dongling Li,
  • Haizhou Wang,
  • Xuejing Shen,
  • Shuangping Lin and ,
  • Haozhou Feng,
  • Ya Peng,
  • Fan Jiang and
  • Xuefan Zhou
  • + 3 authors+ 0 author

7 July 2022

The railway wheel is the key component of high-speed railway train. To assure the safety in service, higher requirements are put forward in this study for the composition, microstructure uniformity, and comprehensive properties of wheel materials. In...

(This article belongs to the Special Issue Research on Heat Treatment of Advanced Metallic Materials)
  • Article
  • Open Access
8 Citations
3,126 Views
14 Pages

30 September 2020

The hot ring rolling technology as the crucial procedure for the manufacture of bearing rings plays an important role in determining the final microstructure of bearing rings. In this work, the influence of the hot ring rolling process on the microst...

(This article belongs to the Special Issue Recent Advances and Trends in Metal Forming)
  • Article
  • Open Access
3 Citations
1,461 Views
15 Pages

18 July 2025

This study examined the relationship between microhardness, morphology, and phase composition of dental yttria-stabilized tetragonal zirconia polycrystals (Y-TZP), which directly impact their long-term clinical performance and durability. The primary...

(This article belongs to the Special Issue Advances in New Alloys, Polymers and Composites for Biomedical Applications)
  • Article
  • Open Access
1 Citations
574 Views
12 Pages

Enhancing Wear Resistance and Surface Hardness of Three-Dimensionally Printed Denture Teeth Through Post-Treatment Under Elevated Temperature and Pressure

  • Shanglin Wu,
  • Yuriko Komagamine,
  • Bohan Tang,
  • Tamaki Hada and ,
  • Aung Soe Myint,
  • Pong Pongprueksa and
  • Manabu Kanazawa
  • + 2 authors+ 0 author

3 September 2026

Three-dimensionally (3D)-printed denture teeth are increasingly used in clinical practice; however, their wear resistance and surface hardness may be insufficient for long-term clinical application. Moreover, the effect of post-treatment under elevat...

(This article belongs to the Special Issue Advanced Dental Biomaterials for Prosthodontic Applications: Functional and Biological Perspectives)
  • Article
  • Open Access
2 Citations
5,177 Views
11 Pages

7 July 2017

The influence from residual surface stresses on global indentation properties, i.e., hardness and size of the contact area, have been studied quite frequently in recent years. A fundamental assumption when evaluating such tests is that the material h...

  • Article
  • Open Access
67 Citations
23,143 Views
13 Pages

Vickers Hardness of Diamond and cBN Single Crystals: AFM Approach

  • Sergey Dub,
  • Petro Lytvyn,
  • Viktor Strelchuk,
  • Andrii Nikolenko and ,
  • Yurii Stubrov,
  • Igor Petrusha,
  • Takashi Taniguchi and
  • Sergey Ivakhnenko
  • + 3 authors+ 0 author

12 December 2017

Atomic force microscopy in different operation modes (topography, derivative topography, and phase contrast) was used to obtain 3D images of Vickers indents on the surface of diamond and cBN single crystals with high spatial resolution. Confocal Rama...

(This article belongs to the Special Issue Crystal Indentation Hardness)
  • Article
  • Open Access
12 Citations
3,684 Views
11 Pages

Investigation of the Mechanical Properties of Mn-Alloyed Tin-Silver-Copper Solder Solidified with Different Cooling Rates

  • Tamás Hurtony,
  • Oliver Krammer,
  • Balázs Illés,
  • Gábor Harsányi and ,
  • David Bušek and
  • Karel Dušek
  • + 1 author+ 0 author

20 November 2020

Manganese can be an optimal alloying addition in lead-free SAC (SnAgCu) solder alloys because of its low price and harmless nature. In this research, the mechanical properties of the novel SAC0307 (Sn/Ag0.3/Cu0.7) alloyed with 0.7 wt.% Mn (designated...

(This article belongs to the Special Issue Environmentally-Induced Failures of Electronic Grade Alloys and Coatings)
  • Article
  • Open Access
23 Citations
7,140 Views
14 Pages

Fabrication and Characterization of a Low Magnetic Zr-1Mo Alloy by Powder Bed Fusion Using a Fiber Laser

  • Xiaohao Sun,
  • Weiwei Zhou,
  • Keiko Kikuchi,
  • Naoyuki Nomura and ,
  • Akira Kawasaki,
  • Hisashi Doi,
  • Yusuke Tsutsumi and
  • Takao Hanawa
  • + 3 authors+ 0 author

13 November 2017

A low magnetic Zr-1Mo alloy was fabricated by a powder bed fusion (PBF) process using a fiber laser. The microstructure, surface morphology, and pore distribution of the as-built Zr-1Mo alloy were observed. Its magnetic susceptibility and Vickers har...

(This article belongs to the Special Issue Zirconium Alloys)
  • Article
  • Open Access
74 Citations
5,424 Views
17 Pages

Novel Poly(Methyl Methacrylate) Containing Nanodiamond to Improve the Mechanical Properties and Fungal Resistance

  • Utkarsh Mangal,
  • Ji-Yeong Kim,
  • Ji-Young Seo,
  • Jae-Sung Kwon and
  • Sung-Hwan Choi

21 October 2019

Herein we evaluate the effect of nanodiamond (ND) incorporation on the mechanical properties of poly(methyl methacrylate) (PMMA) nanocomposite. Three quantities of ND (0.1, 0.3, and 0.5 wt.%) were tested against the control and zirconium oxide nanopa...

(This article belongs to the Section Biomaterials)
  • Review
  • Open Access
8 Citations
7,543 Views
12 Pages

18 July 2011

Bronization and carburization of fine-grain superplastic stainless steel is reviewed, and new experimental results for fine grain Ti88.5Al4.5V3Fe2Mo2 are reported. In superplastic duplex stainless steel, the diffusion of carbon and boron is faster th...

  • Article
  • Open Access
41 Citations
7,694 Views
10 Pages

Mechanical Properties of 3D-Printed Occlusal Splint Materials

  • Vladimir Prpic,
  • Filipa Spehar,
  • Dominik Stajdohar,
  • Roko Bjelica and ,
  • Samir Cimic and
  • Matej Par
  • + 1 author+ 0 author

18 August 2023

Data regarding the mechanical properties of three-dimensionally (3D) printed materials for occlusal splint manufacturing are scarce. The aim of the present study was to evaluate the flexural strength and surface hardness of modern 3D-printed occlusal...

(This article belongs to the Section Digital Technologies)
  • Article
  • Open Access
12 Citations
4,290 Views
14 Pages

Interfacial Structure and Physical Properties of High-Entropy Oxide Coatings Prepared via Atmospheric Plasma Spraying

  • Tae-sung Park,
  • Nana Kwabena Adomako,
  • Andrews-nsiah Ashong,
  • Young-kuk Kim and ,
  • Seung-min Yang and
  • Jeoung-han Kim
  • + 1 author+ 0 author

24 June 2021

The feasibility of using a high-entropy rare-earth oxide (REO) as a top coating material for thermal barrier coatings was explored using the atmospheric plasma spray technique. The microstructure and Vickers hardness of the coating layer were compare...

(This article belongs to the Special Issue Surface Modification and Functionalization of High-Temperature Alloys)
  • Article
  • Open Access
342 Views
17 Pages

10 September 2026

The surface condition of the bond coat is an important factor governing the growth and microstructural development of electron-beam physical vapour deposition (EB-PVD) TBCs. In this study, 7 wt.% yttria-stabilised zirconia (7YSZ) coatings were deposi...

(This article belongs to the Special Issue Surface and Interface Functionalization: Advancements in Coatings, Modification, and Restoration)
  • Article
  • Open Access
13 Citations
6,184 Views
13 Pages

Microwave Sintering of SiAlON Ceramics with TiN Addition

  • Özgür Sevgi Canarslan,
  • Roberto Rosa,
  • Levent Köroğlu,
  • Erhan Ayas and ,
  • Alpagut Kara and
  • Paolo Veronesi
  • + 1 author+ 0 author

25 April 2019

α-β SiAlON/TiN composites with nominal composition of α:β = 25:75 were fabricated by microwave sintering. The effect of titanium nitride addition on the phases, microstructure, microwave absorption ability and mechanical properties (Vickers hardness...

(This article belongs to the Special Issue Conventional and Microwave Sintering Techniques in Materials)
  • Article
  • Open Access
17 Citations
7,890 Views
15 Pages

Automatic Method for Vickers Hardness Estimation by Image Processing

  • Jonatan D. Polanco,
  • Carlos Jacanamejoy-Jamioy,
  • Claudia L. Mambuscay,
  • Jeferson F. Piamba and
  • Manuel G. Forero

30 December 2022

Hardness is one of the most important mechanical properties of materials, since it is used to estimate their quality and to determine their suitability for a particular application. One method of determining quality is the Vickers hardness test, in w...

(This article belongs to the Topic Computer Vision and Image Processing)
  • Article
  • Open Access
13 Citations
5,411 Views
8 Pages

2 January 2018

High-density (>98% of full density) nanocrystalline invar alloys with significantly enhanced hardness (>240 in Vicker’s hardness) were prepared by sintering compacted Fe-Ni nanoparticles in hydrogen. The precursor Fe-Ni nanoparticles were synth...

(This article belongs to the Special Issue Synthesis and Properties of Bulk Nanostructured Metallic Materials)
  • Article
  • Open Access
22 Citations
5,334 Views
10 Pages

19 April 2019

Based on electromagnetic theory, metallurgical characteristics can be detected by eddy current nondestructive testing technology. In this study, the relationship between the surface microstructure and the eddy current output of martensitic stainless...

  • Article
  • Open Access
17 Citations
3,444 Views
17 Pages

Properties of Cold Sprayed Titanium and Titanium Alloy Coatings after Laser Surface Treatment

  • Rafał Zybała,
  • Bartosz Bucholc,
  • Kamil Kaszyca,
  • Krystian Kowiorski and ,
  • Dominika Soboń,
  • Wojciech Żórawski,
  • Dorota Moszczyńska,
  • Rafał Molak and
  • Zbigniew Pakieła
  • + 4 authors+ 0 author

16 December 2022

Additive manufacturing (AM) has seen remarkable development in recent years due to relatively high efficiency of the process. Cold spraying (CS) is a particular method of AM, in which titanium and titanium alloy powders are used. CS is a very competi...

(This article belongs to the Section Mechanics of Materials)
  • Article
  • Open Access
10 Citations
3,753 Views
13 Pages

17 December 2024

The load and size of the indentation may affect the hardness value. This study investigated the effect of the indentation size on the microhardness of one resin-based composite (RBC). Metal molds 4 mm deep and 12 mm in diameter were filled with Tetri...

  • Article
  • Open Access
12 Citations
3,951 Views
14 Pages

25 May 2022

Solution and aging heat treatment are effective means to improve the mechanical properties of Al-Li alloys. The solution treatment and aging treatment tests of 2060 Al-Li alloy were carried out. The yield strength, tensile strength, elongation, Vicke...

  • Article
  • Open Access
18 Citations
3,593 Views
15 Pages

Dynamic Model of Polished Stone Value Attenuation in Coarse Aggregate

  • Jingyi Liu,
  • Bowen Guan,
  • Huaxin Chen,
  • Kaiping Liu and ,
  • Rui Xiong and
  • Chao Xie
  • + 1 author+ 0 author

16 April 2020

The polished stone value (PSV) of coarse aggregate is closely related to pavement skid resistance and traffic safety. However, the determination of the PSV of coarse aggregate is conventionally a time- and energy-intensive process. To facilitate the...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
2 Citations
1,798 Views
17 Pages

30 November 2024

This study explores the use of a high-temperature arc generated during tungsten inert gas (TIG) welding to enhance the mechanical properties of the surface of AISI 1020 steel. An innovative two-step process involves using the high-temperature arc as...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
31 Citations
6,046 Views
20 Pages

28 January 2023

Microhardness testing is a widely used method for measuring the hardness property of small-scale materials. However, pronounced indentation size effect (ISE) causes uncertainties when the method is used to estimate the real hardness. In this paper, t...

(This article belongs to the Topic Research on the Mechanical Wear of Gear-Shaped Parts)
  • Article
  • Open Access
18 Citations
2,823 Views
12 Pages

30 January 2023

Y2O3-reinforced Al-Si alloy coatings were prepared on the surface of a Mg alloy by the laser cladding technique. The microstructure, hardness, and wear resistance of the coatings were analyzed using an X-ray diffractometer, a scanning electron micros...

(This article belongs to the Special Issue Microstructure, Friction and Wear, Hardness Properties and Numerical Simulation of Coatings)
  • Article
  • Open Access
6 Citations
2,695 Views
15 Pages

16 May 2023

A WC-particle-reinforced nickel-based alloy surfacing layer was fabricated on 42CrMo ultra-high-strength steel. The microstructure and the mechanical and impact-damage behaviors of the surfacing layers at the evaluated temperatures were investigated...

  • Article
  • Open Access
5 Citations
2,524 Views
15 Pages

Corrosion Behavior of S235JR Carbon Steel in 0.5 M HCl Solution During 24 Weeks

  • Alina Crina Mureșan,
  • Daniela Laura Buruiana,
  • Viorica Ghisman,
  • Elena Emanuela Herbei and
  • Nicoleta Bogatu

29 September 2025

This study aims to evaluate the corrosion behavior of and morphological changes in S235JR steel exposed to 0.5 M hydrochloric acid solution over a period of 24 weeks. Corrosion resistance was assessed through weight loss measurements and electrochemi...

(This article belongs to the Special Issue Corrosion Behavior of Carbon Steels in Natural and Industrial Environments—2nd Edition)
  • Article
  • Open Access
20 Citations
3,268 Views
12 Pages

23 October 2023

In this study, a surface hardening of AISI 52100 bearing steel was performed by ultrasonic nanocrystal surface modification (UNSM), and electrolytic-plasma thermo-cyclic surface modification (EPSM), and their effects on the wear resistance were inves...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
62 Citations
8,545 Views
14 Pages

19 October 2017

The present article studied the effect of ultrasonic surface rolling process (USRP) on the microstructure and wear behavior of a selective laser melted Ti-6Al-4V alloy. Surface characteristics were investigated using optical microscope, nano-indentat...

  • Article
  • Open Access
2 Citations
2,637 Views
17 Pages

29 December 2024

This study evaluated the color stability, surface roughness, and hardness of 3D-printed and heat-polymerized denture materials. A total of 90 samples were prepared, with equal numbers of 3D-printed and heat-polymerized disks. The initial hardness, su...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
10 Citations
3,401 Views
15 Pages

Impact of Engineering Surface Treatment on Surface Properties of Biomedical TC4 Alloys under a Simulated Human Environment

  • Hongyun Deng,
  • Kuixue Xu,
  • Shuguang Liu,
  • Chaofeng Zhang and ,
  • Xiongwei Zhu,
  • Haoran Zhou,
  • Chaoqun Xia and
  • Chunbao Shi
  • + 3 authors+ 0 author

27 January 2022

The impact of sandblasting, anodic oxidation, and anodic oxidation after sandblasting on the surface structure and properties of titanium alloys was investigated. It was found that the surface treatments had a significant influence on the surface rou...

(This article belongs to the Special Issue Novel Coatings for Corrosion Protection)
  • Article
  • Open Access
38 Citations
6,893 Views
16 Pages

8 November 2019

Results from nanoindentation of aluminum single crystals deliver valuable information as model systems for understanding technical aluminum alloys. The effect of the crystal orientation and the azimuthal indenter orientation on indentation hardness a...

of 11